PURPOSES : The objective of this study is to present a practical application method for measuring the setting time of concrete in the field, considering different concrete blending and curing environments. METHODS : In the experimental environment of the concrete setting experiment, a mold was made in the laboratory, and the curing temperature was performed at laboratory room temperature (20-25 ℃), heater (30 ℃), and dryer (40 ℃). In the field, the experimental method was performed in summer and autumn, setting experiments on penetration resistance, ultrasonic pulse velocity, and semi-calorimeter. RESULTS : The result of the concrete setting time experiment was that the early setting time was achieved in the combination of filash and slag when the concrete was mixed, and the setting time in the curing environment was the same as the early setting time in the field. The setting time measurement method shows the correlation of the high crystal coefficient at UPV with 0.99 based on PR and the good ratio of 92 % to 107 % on average. In addition, the semi-calorimeter shows a good crystal coefficient of 0.96 to 0.99 and a good setting time of 88 % to 101 % on average. CONCLUSIONS : The analysis of the setting time of the concrete shows that the curing temperature is more affected than the mixture, and it is considered that the UPV test, which evaluates the reliability of the degree of purification, is easy to sampie among the three methods.

북한 핵에 대한 IAEA의 사찰이 2002년 종료된 이후 북한은 2017년에 여섯 번째의 핵실험과 ICBM급인 화성-15형을 시험 발사하고 핵무력을 완성하였다고 선언하였다. 그리고 북한은 2021년 초 조선노동당 8차 대 회에서는 핵고도화 선언을 하기도 하였으며 2022년 들어 극초음속미사 일, IRBM, ICMB 등을 시험발사하며 한반도 정세를 더욱 악화시키고 있 다. 시간이 경과할수록 북한의 핵능력은 더욱 확장되고 고도화할 가능성 이 많다. 한국과 미국을 포함하는 국제사회는 북한과의 비핵화 협상을 적극 추진하고 실질적 검증을 통해 북한의 완전한 비핵화를 달성해야 한다. 본 연구의 목적은 군비통제 검증 분야의 역사적 성공 사례인 INF 조약 이행과정 분석을 통하여 북한 핵에 대한 핵심적 검증과정인 현장사찰을 촉진하는 방안을 모색하는 것이다. 북한의 완전한 비핵화를 위한 협상에 서 가장 고비가 될 수 있는 검증의 현장사찰에 관한 실행가능하고 발전 적인 방안은 다음과 같다. 첫째, 북한을 NPT에 복귀시키고 IAEA의 안전 조치협정에 가입하도록 하여 ‘IAEA 주도의 현장사찰’을 실시하여야 한 다. 둘째, 북한 핵시설 중 미신고·미공개된 핵시설에 대한 ‘선택적이고 효과적인 현장사찰’이 이루어져야 한다. 셋째, 북한의 폐쇄적인 사회적 특수성을 고려하여 ‘상호협력적 현장사찰’이 이루어져야 한다. 넷째, 다 양한 국내 및 국제기술수단을 이용하여 원격 감시, 위성 및 항공 감시, 핵관련 인원의 인터뷰, 문헌조사, 시료 채취 및 정밀분석 등을 시행하는 ‘과학기술 집약적 통합 현장사찰’이 이루어져야 한다.

The frequent detection and occurrence of micropollutants (MPs) in aquatic ecosystems has raised public health concerns worldwide. In this study, the behavior of 50 MPs was investigated in three different domestic wastewater treatment plants (WWTPs). Furthermore, the Kruskal-Wallis test was used to assess the geographical and seasonal variation of MPs in the WWTPs. The results showed that the concentrations of 43 MPs ranged from less than 0.1 to 237.6 μg L-1, while other seven MPs including 17-ethynylestradiol, 17-estradiol, sulfathiazole, sulfamethazine, clofibric acid, simvastatin, and lovastatin were not detected in all WWTPs. Among the detected MPs, the pharmaceuticals such as metformin, acetaminophen, naproxen, and caffeine were prominent with maximum concentrations of 133.4, 237.6, 71.5, and 107.7 μg L-1, respectively. Most perfluorinated compounds and nitrosamines were found at trace levels of 1.2 to 55.3 ng L-1, while the concentration of corrosion inhibitors, preservatives (parabens), and endocrine disruptors ranged from less than 0.1 to 4310.8 ng L-1. Regardless of the type of biological treatment process such as MLE, A2O, and MBR, the majority of pharmaceuticals (except lincomycin, diclofenac, iopromide, and carbamazepine), parabens (except Methyl paraben), and endocrine disruptors were removed by more than 80%. However, the removal efficiencies of certain MPs such as atrazine, DEET, perfluorinated compounds (except PFHxA), nitrosamines, and corrosion inhibitors were relatively low or their concentration even increased after treatment. The results of statistical analysis reveal that there is no significant geographical difference in the removal efficacy of MPs, but there are temporal seasonal variations in all WWTPs.

PURPOSES : Abroad, road pavement materials vary depending on the speed and traffic volume of vehicles, but owing to the negative perception of block pavements, sidewalks, parking lots, and parks are primarily used in Korea. In addition, since speed restriction policies such as safety speed 5030 have been implemented recently, it is necessary to use block pavements for roadways, which are considered to have the effect of reducing speed. Therefore, it is necessary not only to actively discuss the introduction of block pavements for roadways but to continue research on the effectiveness of the performance evaluation and to change the perception of roads in Korea. METHODS : In this study, five indicators (surface damage, surface temperature, driving speed of vehicle, noise, and suspended dust) were selected for a sustainable road environment. The performance evaluation index of block pavement for roadways was decided according to the domestic and international literature, and the data were collected based on the evaluation index in the section with block pavement for roadways in Korea. RESULTS : The damage rate was calculated 0.35% according to the breakage of block and Maintenance Control Index(MCI) was ranked A~B even though the pavement was used for more than 4~5 years. The surface temperature of block pavement has a temperature reduction effect of 7 ℃ compared with ordinary asphalt pavement and a speed reduction of approximately 4 km/h on average; therefore, the traffic calming effect of block pavements can be expected. The noise of block pavement and asphalt pavement exhibited a similar level, and the noise level experienced by pedestrians did not change significantly as a result of frequency analysis. The measurement of road suspended dust around the road confirmed the possibility of reducing the concentration of road dust in the air owing to the smooth surface drainage and the results indicated the possibility. CONCLUSIONS : The results of this study are expected to contribute to the recognition and functional improvement of domestic block pavements by continuous monitoring to ensure the reliability of blocks. In addition, it is necessary to ensure the reliability of the quality and functional evaluation of paving materials through continuous on-site monitoring.

With the advancement of industrialization, modern industry had sophisticated technology, and manufacturers also demanded high-precision measurement accuracy. Improving the quality level by increasing the reliability of measurement results as well as accurate measurement is a key issue to increase the competitiveness of today's manufacturing industry. In general, measurement results depend on tolerances in the industrial field, and it may be difficult to guarantee the reliability of the data in the case of an industry that deals with precision parts. Currently, measurement uncertainty is mainly applied to the calibration and test fields of instruments. This study is aim to apply measurement uncertainty as a way to improve the accurate analysis and reliability of measurement results in the industrial field. For this, precision parts connected by shaft and hole were selected among geometric elements, and roundness and cylindricity were measured using a roundness measuring instrument and CMM. And, taking into account the environment in which these measurements were made, factors affecting the measurement results were derived, and a mathematical model was established to calculate the measurement uncertainty. Applying uncertainty in the field in this way is expected to improve the level of quality and accurate analysis of measurement results.

PURPOSES : The purpose of this study is to preliminarily examine the field applicability of modular pavement marking tape (PMT) to increase the lane awareness of motorists on existing roadways. METHODS : A pavement marking tape (PMT) comprises an adhesion layer and a paint coating layer. The adhesion layer is prepared using gussasphalt-based materials that have properties similar to those of existing asphalt materials. Thermal adhesion is performed to adhere the tape to the pavement. For the paint coating layer, polyurea materials are selected after reviewing the existing materials suitable for pavement lane marking. To conduct field evaluations on the adhesion layer, monitoring is performed after the pilot deployment of the PMT is completed. Twelve samples are prepared to investigate the optimal ratios for the mixture of paint coating layer materials. The durability of the PMT is examined using a turntable road-marking test system (RPA) with a wheel load on the samples. A total of 50,000 RPA, equivalent to P4, is performed. The performance is evaluated by capturing the retroreflectivity measure, which is used as an indicator of the pavement marking performance. The PMT is utilized on a roadway segment with significant heavy vehicle traffic, and continuous monitoring is performed to examine its performance in the field. RESULTS : Based on a visual inspection of the adhesion layer material, no significant issue is observed in terms of the adhesion performance of the PMT. Furthermore, the overall retroreflectivity obtained from the RPA exceeds 300 mcd/m2·lux. It is discovered that the optimal ratios for the mixture of polyurea and binder for the paint coating layer are 4:6 and 2:8, respectively, which results in a retroreflectivity that is 90% or above the initial retroreflectivity. Using a prototype of the PMT for field tests, a performance evaluation is conducted by analyzing the retroreflectivity measured after 2 and 7 weeks from the prototype deployment. The retroreflectivity measured for the first 2 weeks after the deployment appears acceptable for field use. However, the retroreflectivity is reduced significantly when it is measured 7 weeks after deployment, resulting in the necessity for a more reliable material that can retain long-term durability. CONCLUSIONS : The lane awareness of a motorist is crucial for accident mitigation under not only nighttime driving, but also severe weather conditions. In this regard, modular PMT is expected to increase the lane awareness of motorists, thereby improving the quality of lane marking materials. In this study, various exploratory field tests are conducted to analyze the field applicability of the PMT. It is noteworthy that the results presented herein are obtained from preliminary performance evaluations of the PMT. Hence, further investigations pertaining to the long-term durability of PMTs must be conducted using advanced test equipment such as an accelerated pavement tester.

PURPOSES : The purpose of this study is to analyze the crack and vertical behaviors of a continuously reinforced concrete pavement (CRCP) under three different steel ratios (0.6%, 0.7%, and 0.8%) using field measurement data acquired from isolated concrete slabs with transverse cracks. METHODS : Using an LVDT and a crack gauge, CRCP behavior data are acquired by segmenting a concrete slab into multiple sections based on the similarity in the longitudinal steel ratio of each section. To examine the vertical behavior of CRCP based on longitudinal steel ratios, three field experiments are conducted in February, May, and September three years after project completion. The minimum and maximum ambient temperature data for each section are acquired during the experiments. Using the data acquired, the vertical and crack behaviors of CRCP with 0.6% of longitudinal steel ratios are analyzed. In addition, the effect of the steel ratio on the vertical behavior as well as seasonal vertical behaviors are examined. RESULTS : Analysis of the vertical behavior of concrete slabs with a 0.6% steel ratio shows that the minimum vertical displacement occurred at the center of the slab, whereas a significant vertical displacement is detected on the edges of the slab. Based on examining vertical displacements formed along the direction of transverse cracks, it is observed that the vertical behavior is prominent around the shoulders, whereas similar vertical behaviors are observed at the center and joints of the slab. Furthermore, it is discovered that the minimum crack occurred at the center of the transverse cracks, whereas the maximum crack occurred on the shoulders and joints. Furthermore, it appears that the daily displacements of the vertical behavior at the center of the slab constitute approximately one-half of the daily displacements on the joints. Based on the results of vertical behavior as a function of the longitudinal steel ratios, it is discovered that steel ratios of 0.7% and 0.8% yield the most prominent vertical behaviors around the edge of the shoulder in the winter, spring, and fall seasons. The seasonal deviations of the vertical behaviors based on the measuring positions of the longitudinal steel ratios appear less significant at the center of the slab than those on the shoulder. In particular, for the slab with a steel ratio of 0.8%, subtle vertical behaviors are observed at the center. It is discovered that the seasonal deviation of the vertical behavior measurements varying by the measuring locations of the steel ratios appears less significant at the center of the slab than at the shoulder, and that it decreases with the steel ratio. CONCLUSIONS : CRCP generates cracks on the slab; however, they are managed by rebars in the CRCP. This study reveals that the major vertical and crack behaviors of CRCP occur around the shoulders than at the center of the CRCP slab. Therefore, new methods for managing cracks on the CRCP shoulder should be developed to improve the performance of CRCP. It is hoped that the results presented herein will be useful for the advanced analysis of CRCP behaviors.

Recently, virtual reality (VR) and augmented reality (AR) technologies are attracting attention as core technologies in the era of the 4th industrial revolution. These virtual and augmented reality technologies are being used in a variety of industries, including the construction industry, healthcare industry, and manufacturing industry, to innovate in communication and collaboration, education and simulation, customer service and reinvention of the customer experience. In this paper, VR-based experiential safety education was conducted for workers of shipbuilding companies in Ulsan city, and for them, the educational effectiveness such as immersion, site applicability, safety accident prevention, education satisfaction, overall performance, and safety behavior in VR-based safety experience education were measured. In addition, we examined whether the immersion of VR-based safety experience education affects site applicability, safety accident prevention, educational satisfaction, overall performance, and safety behavior. Furthermore, it was analyzed whether site applicability plays a mediating role in the relationship between immersion and safety accident prevention. As a result, it was found that the immersion of VR-based safety experience education affects site applicability, safety accident prevention effect, education satisfaction, overall performance, and safety behavior, and that site applicability mediates between immersion and safety accident prevention. Based on these results, we suggests a direction for the development of VR-based contents in the field of safety and health and the transformation of safety and health education in the future.

PURPOSES : On a thin epoxy overlay pavement, epoxy is placed on the existing bridge deck pavement, followed by the spraying of aggregates on it. The bond strength between the existing pavement and overlay pavement is an important factor representing the performance of the thin epoxy overlay pavement, in addition to the skid resistance and roughness. Therefore, the bond strength, skid resistance, and roughness of a thin epoxy overlay pavement constructed for field tests under various field conditions are examined in this study. METHODS : The usability of epoxy and aggregates on a thin epoxy overlay pavement is identified by testing their material properties in a laboratory. A construction test is performed using the pretreatment conditions of the existing pavement surface and the number of layers of overlay pavement as variables. The bond strength, skid resistance, and roughness are analyzed 3 d after constructing the test pavement, and immediately before and after applying repetitive traffic loadings at 6 months. RESULTS : When the existing pavement is in good condition, as in this study, the bond strength of the thin epoxy overlay pavement is affected more significantly by the existing pavement condition than the material properties of epoxy, in which destruction is indicated in the existing pavement. The skid resistance is affected primarily by the condition of the aggregates sprayed on the epoxy. The pavement on which the aggregates are well sprayed indicate a high skid resistance. The roughness is not affected by any variables, such as the pretreatment conditions, number of thin pavement layers, and repetitive traffic loadings. CONCLUSIONS : A long-term evaluation of the bond strength, skid resistance, and roughness will be conducted on a test pavement. In addition, another construction test will be performed to investigate the performance of a thin epoxy pavement overlaid on a bridge deck pavement under inferior conditions.