A study for species composition and abundance of the fish assemblages in the eastern Jinhae Bay, Korea was conducted using monthly larval collection by a RN80 net from October, 2010 to September, 2011. Of all the 45 species collected, the dominant species were Clupea pallasii, Hexagrammos otakii, Pholis fangi and Engraulis japonicus. Clupea pallasii, Hexagrammos otakii, Pholis fangi in winter and examined Engraulis japonicus, Acanthogobius sp., Parablennius yatabei, and Tridentiger trigonocephalus in summer appeared seasonally. Popoulation characteristic by stations was not clear seasonally and spatially, and appearance aspects of dominant species were similar by stations. Compared our results with other studies in the South Sea, dominant species and their appearance period were similar to their spawning period. Finally, the appearance period of the larvae in the South Sea was closely resulted to spawning period rather than the regional characteristic.

Intermittent duty of emergency generator has problems emitting large quantities of PM and NOx in exhaust gas. The aim of this study is to propose DPF system which can be applied to medium-large emergency generators. The system is composed of soot dust collector, silencer and filter trap, which is designed to reduce PM emissions at the emergency generator start-up. The pneumatic system controls a flow direction of exhaust gas to pass through the soot collector and filter trap until the engine reaches complete combustion condition. An experiment is performed to measure PM content and concentration to analyze the performance and characteristics of the proposed system.

This study analyzed the condition of marine accident and disaster rate of crew of Korean fishing vessels by vessel type, and checked the Australian safety management system and relevant regulation in Korea to suggest measures to build coastal/offshore fishing vessel safety management system in Korean coastal/offshore fishery. As a result, the power and production amount of Korean coastal/offshore fishing vessel is consistently decreasing while marine accident is increasing. Disaster rate of crew was higher than land industry, especially, the disaster rate of coastal/offshore fishing vessel was very high (100.0‰). Australia applies safety management system differed by vessel type and operation waters which fully considers the characteristics of pertinent vessel. The average accident rate of fishing vessels with gross tonnage over 20 tons among the Korean coastal/offshore fishing vessel was 13.6%, which was significantly higher than fishing vessels with gross tonnage below 20 tons (1.4%). Such result indicates it is urgent to implement safety management system to fishing vessel with gross tonnage over 20 tons and introduce fishing vessel safety supervisor. Establishing safety management system of coastal/offshore fishing vessel will contribute to consistent industrial development by achieving the general goal of reducing marine accident and spreading safety culture.

The age and growth of Pleurogrammus azonus in the coastal of Gangwon-do, East Sea were determined, from monthly samples of commercial catches, caught by the gill net and set net fishery from January to December in 2008. Gonadosomatic index (GSI) began to increase in September, and reached the maximum between November and December. After spawning GSI began to decrease from January. The annuli of P. azonus are formed once a year, with the boundary between opaque and translucent zones forming from December to January. The relationships between fork length (FL) and body weight (BW) were BW = 0.005 FL3.240(R2 = 0.963) for females and BW = 0.006 FL3.238(R2 = 0.946) for males. The FLs at annuli formation in otoliths were back-calculated from the otolith-length relationship and were adjusted to von Bertalanffy growth curves to FLt = 70.54 (1–exp(-0.099(t+1.188))) for females and FLt = 51.87 (1–exp(-0.135(t+1.697))) for males. Until the age of 3 years, males grew faster than females; however, from the age of 4 years, females grew faster than males. In the future, we want to study the relationship between early growth and water temperature changes in the East Sea

The purpose of this study is to estimate potential yield (PY) for Korean west coast fisheries using the holistic production method (HPM). HPM involves the use of surplus production models to apply input data of catch and standardized fishing efforts. HPM compared the estimated parameters of the surplus production from four different models: the Fox model, CYP model, ASPIC model, and maximum entropy model. The PY estimates ranged from 174,232 metric tons (mt) using the CYP model to 238,088 mt using the maximum entropy model. The highest coefficient of determination (R2), the lowest root mean square error (RMSE), and the lowest Theil’s U statistic (U) for Korean west coast fisheries were obtained from the maximum entropy model. The maximum entropy model showed relatively better fits of data, indicating that the maximum entropy model is statistically more stable and accurate than other models. The estimate from the maximum entropy model is regarded as a more reasonable estimate of PY. The quality of input data should be improved for the future study of PY to obtain more reliable estimates.

The aim of this study is to investigate influence of moon light to the fishing of squid jigging fishery in the southwest Atlantic Ocean based on analyses of date taken from 127 vessels in Falkland fishing ground by squid jigging fishery from 2010 to 2015. Catch and CPUE were analyzed between the new moon and full moon phases. Catches of the new moon phase were higher than those of the full moon phase by 7.6% and CPUE expressed in mt/day-vessels and mt/line-day were also higher by 18.2%, 18.2% respectively. However, as a result of statistical analysis at a significance level of p ＞ 0.05, no significant statistical differences in catch, mt/day-vessels and mt/line-day were found between the new moon and the full moon as a result of statistical analysis at a significance level of p ＞ 0.05.

In this study, the differences of holding power according to the shape and weight distribution of concrete weight used in shellfish shell fishery were investigated through the experiments. To investigate the differences in shape, five bar-shaped concrete weights with the same length and different cross-sectional shapes were produced. The sectional shape of each weight was square, triangle, circle, small cross, and large cross (SQ, TR, CI, CR-S, CR-L). Ten rectangular parallelepiped weights with different bottom area and cross-sectional area were produced. To investigate the differences by the weight distribution, the holding power on the square model (SQ) with six 50 g weights at different positions was investigated. All the holding power was obtained by measuring the tensile force generated when the concrete weight was pulled at a constant speed on the sand. As a result, there were no differences in holding power between the ten rectangular weights. However, the experiment on weights with different cross-sectional shapes showed differences in holding power. The holding power was higher in the order of CR-L > CR-S > CI > TR > SQ. In the weight distribution test, the holding power was higher as the front side of the weight was heavier. Generally, the frictional force is the same even if the shape is different, when two objects have the same value in the weight and the roughness. On the other hand, it seems to have a large impact when the shape of the bottom is deformed in the course of pulling the object. Particularly, the larger the degree of protrusion like cruciform weights, the more the holding power increased while deeply digging the bottom. It is also likely that the holding power increases as the front weight increases.

This study was conducted in order to improve opening efficiency of the miniaturized large-scale net for anchovy boat seine gear to reduce the fleet size. Field experiments were performed to observe geometry of nets by catcher boats. When the distances between the two ships were 150, 300 and 450 m, and the speeds of towing nets were 0.6, 0.9, and 1.2 k't, respectively. The vertical opening and actual opening of each part of the miniaturized large-scale net was as follows: the front part of the wing net, 8.7-13.3 m, 51-78%; the middle part of the wing net, 28.1-34.2 m, 55-67%; the entrance of the inside wing net, 31.3-38.5 m, 60-73%; the square and bosom, 22.7-29.6 m, 47-62%; the entrance of the body net, 20.9-26.4 m, 42-52%; the entrance of the bag net, 17.2-21 m, 72-89%; the flapper, 13.2-15.3 m, 78-83%; and the end of the bag net, 13.2-15.7 m, 72-75%. By connecting the net pendants with the front part of the wing net, the opening of the front part of the wing net was significantly improved compared to the traditional gear, which ensured both the wing net and the inside wing net with a normal net height. This, in turn, increased the efficiency of herding. The height of the body and bag nets was also higher than that of the tradition gear. In particular, the body net attached to the gear significantly improved the pocket shape of the gear and reduced the number of fish that were caught and escaped from the bag net, which increased the rate of fishing. The tension of towing nets was measured approximately between 2,958 and 7,110 kg, which indicates that the fleet can tow nets with 350 ps, the standard engine horse power. The fishing operation time was shortened compared with of the existent net, and the large-scale buoy attachment operation was also possible to operate the ship without fish detecting boat.

This study was conducted in order to improve fishing gear for existent net of the anchovy boat seine. Field experiments were performed to observe geometry of nets by catcher boats. When the distances between the two ships were 100, 300, and 500 m, and the speeds of towing nets were 0.6, 0.9, and 1.2 k't, respectively. The vertical opening and actual opening of each part of the existent net was as follows: the middle part of the wing net, 12.9-26.6 m, 19-39%; the entrance of the inside wing net, 23.3-35.3 m, 40-60%; the square and bosom, 18.4-24.2 m, 37-49%; the entrance of the bag net, 19.0-23.3 m, 79-96%; the flapper, 13.2-15.3 m, 142-161%; and the end of the bag net, 13.2-15.7 m, 51-61%. The actual net opening of each part of the existent nets used in this study was lower than that of the design net height, due to the low net height of the wing net and the inside wing net, it limited a range of the net height of the square and bosom. The opening of the entrance of the bag net caused the net pocket shape and inflated some parts of the nets. The tension of towing nets was measured between 4.4 and 11.0 tons, and it is necessary to reduce the structure and improve the structure of the bag net.

This study aims to suggest the methodology to improve to estimate back-calculated fish growth parameters using weighted average. It is to contribute to correct errors in the calculation of back-calculated growth equation with unequal numbers of sample by age. If the numbers of sample were evenly collected by age, each back-calculated length at age was equal between arithmetic and weighted averages. However, most samples cannot be evenly collected by age in reality because of different catchability by fishing gear and limitation of environment condition. Therefore, the estimation of back-calculated length by weighted average method is essential to calculate growth parameters. There were some published growth equations from back-calculated length using a simple arithmetic average with different numbers of samples by age when searching for back-calculated growth equations from 91 relevant papers. In this study, the process of deriving growth equation was investigated and two different average calculations were applied to a fish growth equation, for example of Acheilognathus signifer. Growth parameters, such as L∞, k and t0, were estimated from two different back-calculated averages and the growth equations were compared with growth performance index. Based on the correction of back-calculated length using weighted average by age, the changes by female and male were -14.19% and -5.23% for L∞, and 59.28% and 18.91% for k, respectively. The corrected growth performance index by weighted average improved at 7.05% and 2.46% by female and male, respectively, compared to the arithmetic averages.

We propose some countermeasures needed to cope with fortifying international regulations for fisheries subsidies. The government should rigorously select the recipients of fisheries subsidies to ensure that they are not engaged in ineffective projects by resorting to subsidies. On the other hand, the government should make the individual applicant’s application for the subsidies easier by exempting them from the submission of a burdensome feasibility report. As for the strengthening regulatory international movements against the fisheries subsidies, we can consider the following countermeasures. One is not to designate and provide prohibitive subsidies in such a way that violates international norms. The other one is to reform the domestic fisheries subsidies system in Korea with the following points considered. It should be considered that fisheries subsidies, which can be categorized as the actionable subsidies, should not be granted to the items that can be exported but to the items that can be used for domestic consumption or processing. In the case of non-actionable subsidies, the subsidies are mainly allowed for promotion of public-sector research and development, regional development, and adaptation to new environmental regulations. Thus, the non-actionable subsidies should be designated in the consideration of the allowances for these activities.

The improvement of resistance performance for the 4.99 ton class fishing boats was shown. The 4.99 ton fishing boats are the most commonly used one in the Korean coastal region. The evaluation of resistance performance was estimated by the Computational Fluid Dynamics (CFD) analysis. The CFD simulation was performed by the validation for various types of bow shapes on the hull. The optimized hull form from the simulation was selected and showed the best resistance performance. This hull type was tested on the towing tank in the National Institute of Fisheries Science (NIFS). The effective horsepower (EHP) was estimated by the resistance test on the towing tank with the bare hull condition. The drag force on the three service speed conditions was obtained for the resistance analysis to power prediction. The measured drag forces are compared with the results from the CFD simulation with one another. As results of the model tests, it was confirmed that the shape of the bow is an important factor in the resistance performance. The effective horsepower decreased about 30% in comparison with the conventional hull form. Also, the resistance performance improved the reduction of required horsepower, which especially contributed to the energy-saving for the fisheries industry. In the CFD analysis, the resistance performance improved slightly. In this case, the ratio of the residual resistance (CR) in the total resistance (CT) was high. Therefore, the CFD analysis was not enough to satisfy with reflection for the free surface and wave form in the CFD procedure. Both model test and CFD calculation in this study can be applied to the initial design process for the coastal fishing vessel.

Distribution and composition of the seabed litters in the exclusive economic zone of the West Sea of South Korea including 18 sea-blocks were investigated using a bottom trawl gear of the R/V Tamgtu 20 (National Institute of Fisheries Science) from 24th April 2011 to 4th May 2012. Each trawl shot was conducted for an hour in each sea-block and the total trawl shots was 18. As a result, 325.6 kg of seabed litter in total has been collected.　The quantity of the seabed litter was highest at No. 202 of the sea-block, close to the Heuksan-Do. The highest occupied sea material was plastic (83.1% of entire seabed litters), the second highest material was metal combined with plastic (10.6%), and glass (2.9%), metals (2.3%), vinyl (0.6%), cloth (0.4%) and wood (0.2%) in order. The origin of seabed litters was from fishing gear (89.0% of all seabed litters). Therefore, it could be assumed that most seabed litters were derived from the fishing activity for example fishing nets and ropes.

The most frequent occurring and the serious marine casualties in fishing vessels are the collision in statistics from Korea Maritime Safety Tribunal (2008-2015). Collisions are is given a great deal of weight in all marine casualties, and the main cause of collisions is the negligence of watching. From this point of view, this study deals with the collision and its immediate cause, the negligence of watching which are main factors on the indirect causes. Basic analyzing data was gathered from the questionnaire made by experts of sea service part, and analyzed by using the fault tree analysis (FTA). From the result of the study, the occurrent probability of the negligence of watching in the collision due to the indirect causes occupied 64.9%, and its probability caused by the man factors was less than the other factors; i.e. the media factors and the management factors. For the reduction of the negligence of watching in the collision from this study, it needs an effort to remove not only the man factors, but also the media factors and management factors.

As invigoration plan of the marine tourism, Busan City has the plan to operate the cruise ship inside of the harbor, but the area has narrow water way with heavy traffic. As a result it is requested to evaluate the safety for the preparation of actual navigation. In this study, the Ship Handling Simulation (SHS) Assessment was conducted, which is regulated by the Maritime Traffic Safety Audit Scheme (MTSAS) in compliance with the Marine Safety Law and the Maritime Traffic Risk Assessment System based on the Electronic Chart Display and Information System (ECDIS). The proximity assessment, control assessment and subjective assessment were implemented, which is enacted by the Marine Safety Law by using the SHS. In the case of proximity assessment, the probability of trespass was not analyzed. As the control assessment, the swept path was measured at 11.7 m and 11.5 m for port entry and port departure respectively, which exceeded the width of the model vessel, 10.4 m over; it was considered as a marginal factor. As a result of the subjective evaluation of the navigator, there would be no difficulty on ship maneuvering by paying particular attention to the mooring vessel nearby the Busan Bridge and Yeongdo Bridge as well as the coming vessel from the invisible sea area when the vessel is entering and departing the port. The Marine Traffic Risk Assessment System analyzed as [Cautious] level until the vessel passed the Busan bridge and the curved area at 5 kts and it became to [Dangerous] level from where it left 75 m to the Busan Bridge. When the vessel passed the Busan Bridge and the curved area at 10 kts and entered the narrow area, it indicated the [Dangerous] level and became to [Very dangerous] level from where it left 410 m to the Busan bridge. In conclusion, the vessel should maintain at the speed of 5 kts to reduce the risk when it passes this area.

The objective of this study was to prove possible effects of a habitable place for fish around semi-submersible drilling rig which measured underwater radiated noise, irradiance distribution of rig's light and conducted experimental fishing in Malaysia territory and observed for distribution of fishes around the rig by ROV during drilling operation in the East Sea of Korea. As a result underwater radiated noise was 130 dB/μPa from 156.25 to 187.50 Hz, irradiance distribution of light was between 21.5 and 43.1 lx. Despite this result, underwater radiated noise was not a threat to fish around rig and low irradiance distribution of light also played a role in the luring influence of the fishes at night. Fish showed up in the beginning of drilling operation and at the end of drilling operation. However, there are few fish in the midst of drilling operation. The main reason for this result was the destruction of the habitable place due to blow out mud and broken pieces of ground formation in drilling hole. The results are expected to contribute to reasonable fishery management around rig.

A centrifugal cyclone dust collecting apparatus includes a hydro cyclone dust collecting apparatus for separating solid or liquid using liquid or suspension as a medium. In this study, the formation mechanism and improvement of air core and inner air layer were confirmed through Particle Image Velocimetry. These results showed that the modified experimental model was designed in the conventional method suitable for the separation of juvenile fish and eggs. The inlet speed of the multi-stage hydrocyclone dust collector, which can increase the inlet velocity and minimize floatage in the turbulence chamber, was increased from 0.15 to 0.30 m/s. As a result, the air core was stably formed, the inner air layer was increased with increasing speed. In addition, the dust collecting efficiency of egg and juvenile fish was 97.8% on average, It can infer that this system confirmed the ability to efficiently collect particles of 40 μm or more.

We measured the target strength according to the swimming tilt angle and size change for Pacific herring at the frequency of 70 kHz as the basic database in order to estimate its abundance as well as density in the survey area using the hydroacoustical method. The number of the sample used in this study was 14 individuals, and its size distribution by fork length ranged between 20.3 and 29.8 cm and wet weight was measured between 187.6 and 269.9 g. The variation of TS according to the swimming angle (-30~30°) was measured between 10.3 and 18.8 dB in frequency range, the highest value was measured at head-down of Pacific herring in the tilt angle range between 5 and 9 deg. of its swimbladder. The relationship between TS–FL of herring was the same as TS = 20log10 (FL) – 66.79 when its swimming tilt angle in the daytime (3.8 ± 6.0°) and nighttime (-3.2 ± 13.6°), respectively.

For scientific research, a number of acoustic surveys using commercial echosounders equipped in fishing vessels were conducted throughout the world; however, few studies were performed in South Korea. Hence, this research is an preliminary study for presenting the application of a sounder from a fishing vessel. The fishing operations using a pair trawler (7 Cheonghae) was conducted in the Northwest-Western sea of Jeju Island from 20 to 23 April, 2016. Substantial impulse noises and attenuated signals were eliminated by the latest algorithms. Acoustic signals were grouped into the fish aggregations and long layer-like signals. The fish aggregations appeared between 30 and 60 m, and long layer-like signals showed the diurnal vertical migration. Energetic, morphological and positional properties of the fish aggregations and layer-like signals were described. The fish aggregations appeared mainly between sunrise and sunset; however layer-like signals tended to be presented regardless of time in consideration of the time series analysis. On the basis of the consignment sales, Scomberomorus niphonius, the target species of F/V 7 Cheonghae, was the highest catch with 4,280 kg (74.6%) and might have appeared in fish aggregations and layer forms.

This study was conducted to understand the relationships between fish and zooplankton of distribution in the coastal waters of the East Sea from May to August 2016 using hydroacoustic. To distinguish between fish and zooplankton, we used the time varied threshold (TVT) method at the frequency of 120 kHz. As a result, the mean nautical area scattering coefficient (NASC) of fish was highest at 913 m2/n.mile2 in June and lowest at 315 m2/n.mile2 in July. The mean NASC of zooplankton was highest at 247 m2/n.mile2 in May and lowest at 70 m2/n.mile2 in July. The mean NASC of fish and zooplankton showed a significant difference (P < 0.05) with high correlation (R2 = 0.84). In addition, there was no significant difference in the mean NASC of fishes and zooplankton by depth (t-test, person correction = -0.17, p > 0.05).