Interfacial adhesion between carbon fiber and epoxy resin mostly determine the mechanical properties of the carbon fiber/ epoxy composites and the chemical structures of epoxy resin and hardener plays an important role. In this regard, stereoisomerism of epoxy hardeners, such as 3,3′ and 4,4′-DDS (diaminodiphenylsulfone), can have significant influence on the fracture toughness of the cured epoxy and related carbon fiber composites. Therefore, this study aims to investigate the influence of stereoisomerism of epoxy hardeners on fracture toughness of the carbon fiber/epoxy composites. Triglycidyl aminophenol (TGAP) are selected as epoxy resin and 3,3′- and 4,4′-DDS are selected as epoxy hardener. Wetting behaviors and fiber matrix adhesion of TGAP/DDS mixtures onto carbon fiber are investigated and fracture toughness (KIC) of TGAP/ DDS mixtures are also investigated. Then, the mode II fracture toughness test of the carbon fiber/TGAP/DDS composites are carried out to investigate the influence of hardener stereoisomerism on fracture toughness of the resulting composites. Wetting and fiber matrix adhesion to carbon fiber of TGAP/3,3′-DDS was better than those of TGAP/4,4’-DDS and KIC of TGAP/3,3′-DDS was also better than that of TGAP/4,4′-DDS. As a result of the synergistic effect of better wetting, fiber matrix adhesion, and fracture toughness of TGAP/3,3′-DDS, the mode II fracture toughness of the carbon fiber/ TGAP/3,3’- DDS composites was almost twice of that of the carbon fiber/ TGAP/4,4′-DDS composites. Based on the results reported in this study, stereoisomerism of the epoxy hardeners can influence the fracture toughness of the resulting composites as well as that of the resin itself. In other words, only small difference, such as the spatial arrangement of the molecular structure of epoxy hardeners can cause huge difference in the mechanical properties of the resulting composites.

본 연구는 국내 가드닝 관련 교육프로그램 현황 분석을 위해 ‘가든’, ‘가드닝’, ‘가드너’, ‘정원’, ‘정원사’ 등의 관련 키워드가 프로그램 명, 활동, 유인물 등에 사용된 프로그램과 수목 원·식물원 전문 인력 양성 프로그램을 모두 조사하였다. 국내에서 2017년과 2018년에 운영된 프로그램을 대상으로 하였다. 조사 결과, 54개의 주관기관에서 83개의 가드닝 관련 프로그램이 운영된 것으로 나타났다. 주관기관 중에 지자체가 가장 많은 것으로 나타났고(39기관, 72.2%), 이외에는 사립 수목원·식물원(6개, 11.1%), 공립 수목원·식물원(5개, 9.3%), 국립 수목원·식물원(2개, 3.7%), 사기업(1개, 1.9%), 대학교 (1개, 1.9%) 순으로 나타났다. 83개의 가드닝 관련 프로그램 은 63개의 운영기관에서 수행되었다. 운영기관 중 12개의 기관은 대학교로, 대학교에서 지자체의 프로그램을 위탁받아 운영했음을 알 수 있다. 가드닝 관련 프로그램은 경기도(50개, 61.4%)에 가장 많이 분포되어 있었다. 가드닝 관련 프로그램 중 성인이 참가 가능한 프로그램(64개, 63.4%)이 가장 많았으며, 전체 프로그램 중 65개(78.3%)는 전문교육을 위한 프로그램인 것으로 조사되었다. 국민들의 자연, 숲, 정원에 대한 관심 증대와 지속적인 국가적 정원 분야의 확대가 예상됨에 따라 더 많은 가드닝 관련 프로그램 제공을 통해 다양한 경험의 기회를 주는 것이 필요할 것으로 보인다.

Mesenchymal stem cells (MSCs) are capable of differentiating into mesenchymal tissue such as bone, cartilage, muscle, and adipose, and have been isolated and characterized from various species. Deer adipose tissue-derived MSCs (dAD-MSCs) have not been studied and deer bone marrow-derived MSCs (dBM-MSCs) have not been fully characterized. In this study, we firstly isolated MSCs from deer tissues and then compared characteristics of dAD-MSCs and dBM-MSCs. dAD-MSCs and dBM-MSCs exhibited significant increase in proliferation under low-glucose DMEM culture condition during 20 and 10 passages consecutive passages, respectively. Both cells expressed cell surface markers such as CD73, CD90, and CD105, but did not express CD34 and CD45. Two types of cells expressed stemness markers (Oct4, Sox2, and Nanog) and exhibited differentiation potential into mesodermal lineages. Both cells exhibited osteogenic and chondrogenic differentiation potential, but poor adipogenic differentiation potential. Specifically, dAD-MSCs have a greater capacity for chondrogenic differentiation potential compared to dBM-MSCs. Collectively, we successfully isolated dAD-MSCs from deer for the first time. This study suggests that adipose tissue of deer could be used as a source of deer MSCs.

In this study, pitch crosslinked by oxygen function groups was made into activated carbon (AC) and pore structure was observed. The oxygen functional groups were introduced by the addition of waste PET for pitch synthesis. Activation agent ratios used to obtain the AC during the activation process were 1:1, 1:2 and 1:4 (pitch:KOH, w/w). The oxygen content in the prepared pitch was characterized by elemental analysis. Also, the molecular weight of pitch was investigated by MALDITOF. Specific surface area and micropore volume of the prepared AC were determined by the argon adsorption–desorption analysis and calculated using the Brunauer–Emmett–Teller and Horvath–Kawazoe equations, respectively. Micropore fraction of PET-free AC was smaller than that of PET-added AC. At high activation agent ratio, mesopores were created when the micropore structure collapsed. However, in the PET-added AC, due to the oxygen crosslinking effect, the micropore structure and micropore size were maintained even at a high activation agent ratio. Therefore, PET AC was found to have a higher micropore fraction than that of PET-free AC.

Identifying the selection criteria of wedding planners, who are the main human resource that contribute to the overall satisfaction level of a wedding’s preparation, can produce important data for the wedding industry as it faces a transition period. To develop a scale for wedding planner selection criteria, preliminary items were prepared based on in-depth interviews with an experienced wedding planner group and a comprehensive review of previous studies, such as studies on selection criteria in the wedding industry and service work similar to wedding planners and wedding planner selection criteria. The preliminary items were tested for content validity using a focus group interview, comprising people in the wedding industry, and were refined accordingly. Then, the definitive quantitative questionnaire items were developed after conducting a preliminary survey. The main survey for this study was conducted using the responses of 295 consumers taking an Internet questionnaire. Exploratory factor analysis, Cronbach’s alpha, and confirmatory factor analysis were adopted to develop the scale, which was tested for convergent validity and discriminant validity. This study is academically significant in that it developed a selection criteria scale tailored to wedding planners to address an area that has not been covered in previous studies. It is recommended that future studies conduct empirical analyses using the selection criteria developed in this study to compare influential variables that could affect behavior intention.

목적 : 소다-라임-실리카 유리(soda-lime-silica glass,SG) 기판위에 Ti, Ba-naphthenates를 출발원료로 사용하고 졸겔법으로 나노 결정질 TiO2, BaTiO3 박막을 제조하였다. 박막의 특성을 분석하기 위하여 X-선 회절 분석, 전자현미경, UV스펙트럼을 이용하여 연구하였다. 방법 : 코팅용액을 soda-lime-silica glass 기판 위에 스핀코팅하고 공기분위기에서 500℃에서 열분해시켜 박막을 제조하였다. 제조된 TiO2, BaTiO3 박막의 결정화도는 고분해능 X-선 회절분석법으로 그리고 표면미세구조와 거칠기는 전계 방출 현미경과 원자간력 현미경으로 또 자외선(200〜380 nm), 가시광선(380〜750 nm), 적외선(750〜900 nm) 영역의 투과율은 UV-Visible-NIR 분광광도계로 측정되었다. 결과 : TiO2박막은 아나타제 상이 존재하였으며, BaTiO3 박막은 최고 피크가 확인되지 않았다. 열처리한 TiO2, BaTiO3 박막의 가시광선 투과율은 80% 이상의 투과율을 나타냈으며, BaTiO3 박막은 TiO2 박막보다 자외선 및 청광 차단율이 높았다. 결론 : BaTiO3 박막은 TiO2 보다 자외선 및 청광에 대해 더 높은 차단율이 나타냈으며, 가시광선 투과율은 제조된 모든 박막에서 80% 이상의 투과율이 측정되었다.

The kidney is a highly complex organ, and acute or chronic renal diseases can occur with various complications such as diabetes and hypertension. So far, no target specific treatment is available in acute or chronic renal failure, necessitating the development of alternative therapeutic strategy. Recent experimental findings suggest that the renal function and structure can be restored after being treated with various sources of stem/progenitor cells. In this review, we discuss up-to-date findings of the potential of renal progenitor/stem cells in alleviating renal injuries with a focus on preclinical studies. We also review cellular mechanisms underlying the therapeutic function of these cells.

Acute myocardial infarction (AMI) is considered the major cause of mortality in the world. Tremendous animal studies are performed to develop novel therapeutics, and this study aimed to induce porcine myocardial infarction model by using polyethylene terephthalate (PET). Coronary guidewire was placed in left anterior descending artery (LAD). The balloon angioplasty catheter was inserted at the back of the PET. The balloon catheter was carefully pushed forward, until the balloon marker was located in mid-LAD. Coronary angiography was performed pre- and post-occlusion at 28 days by C-arm. Histologic analysis of heart tissue was performed 28 days after inducing AMI. Thirty three pigs were anesthetized and underwent percutaneous coronary catheterization. All pigs were successfully embolized in mid-LAD by PET. Fifteen pigs died due to ventricular fibrillation during post-anesthetic recovery time, and overall experiment mortality was 45.5%. In 2,3,5- triphenyl tetrazolium chloride staining, gross finding of the ischemic heart lesion showed firm and white area of infarction associated with the apex and left ventricular posterior wall. Infarct on H&E-stained sections demonstrated a region without myocytes and rich with cardiomyocyte with atypical nuclei. Successful induction of AMI by using PET may provide the pathophysiological information of ischemic heart disease and improvement of therapy development for AMI.

Lactic acid bacteria (LAB) were isolated and analysed its fermentation ability in triticale powder at different moisture levels. Furthermore, the antibacterial activity of fermented silage extract against cattle pathogens was also studied. The isolated strains were P. pentosaceus (TC48) and L. brevis (TC50) that confirmed based on biochemical and 16srRNA sequences methods. Extract from LAB fermented silage showed higher antibacterial activity (inhibition zone diameters: 18~24.2 mm) against E. coli P. aeruoginosa, S. aureus and E. Fecalis than the non-inoculated silage extract. TC48 and TC52 strains exhibited high tolerance to artificial gastric, duodenal and intestinal fluids. In summary, lactic acid bacteria mediated fermentation of triticale silage extract showed great antibacterial activity with significant probiotic characteristics might be an effective and safe way to provide new strategies for reducing the incidence of pathogenic bacteria associated diseases in animals.

This study provides an economical and effective method to improve the interlaminar properties of carbon fiber-reinforced polymers (CFRPs) using aluminum trihydroxide (ATH) microparticles. ATH microparticles are cheap and are expected to show good affinity to epoxies in the matrix and sizing agents of the carbon fibers owing to the presence of three hydroxyl groups. In addition, ATH particles are reported to improve the mechanical properties of polymers when used as the reinforcement. In this study, ATH microparticles of various sizes, 1.5, 10, and 20 μm, were used to improve the interlaminar properties of the CFRPs. ATH particles with a size of 1.5 μm improved the tensile properties of the ATH/epoxy resin and did not significantly alter the curing behavior. The interfacial adhesion between the carbon fiber and the epoxy resin was also improved, and the impregnation of the resin mixture remained similar to that of the neat resin, resulting in no significant void and defect formation. Considering the above results, the resulting 1.5 μm ATH-reinforced CFRP showed improved interlaminar properties compared to CFRP without ATH. However, 10 and 20 μm ATH-reinforced CFRPs showed deteriorated interlaminar properties due to the diminished tensile properties of the resin itself and resin impregnation, which resulted in more voids and defects, despite the interfacial adhesion between the fiber and the matrix resin.

For electrodes in electrochemical double-layer capacitors, carbon nanofibers (CNFs) were prepared by thermal treatment of precursor polymer nanofibers, fabricated by electrospinning. Poly(acrylonitrile-co-vinylimidazole) (PAV) was employed as a precursor polymer of carbon nanofibers due to the effective cyclization of PAV polymer chains during thermal treatment compared to a typical precursor, polyacrylonitrile (PAN). PAV solutions with different comonomer compositions were prepared and electrospun to produce precursor nanofibers. Surface images obtained from scanning electron microscopy showed that their nanofibrous structure was well preserved after carbonization. It was also confirmed that electrospun PAV nanofibers were successfully converted to carbon nanofibers after the carbonization step by Raman spectroscopy. Carbon nanofiber electrodes derived from PAV showed higher specific capacitances and energy/power densities than those from PAN, which was tested by coin-type cells. It was also shown that PAV with an acrylonitrile/vinylimidazole composition of 83:17 is most promising for the carbon nanofiber precursor exhibiting a specific capacitance of 114 F/g. Their energy and power density are 70.1 Wh/kg at 1 A/g and 9.5 W/kg at 6 A/g, respectively. In addition, pouch cells were assembled to load the higher amount of electrode materials in the cells, and a box-like cyclic voltammetry was obtained with high capacitances.