A laser scabbling experiment was performed using a high-power fiber laser to investigate the removal rate of the concrete block and the scabbled depth. Concrete specimens with a 28-day compressive strength of 30 MPa were used in this study. Initially, we conducted the scabbling experiment under a stationary laser beam condition to determine the optimum scan speed. The laser interaction time with the concrete surface varied between 3 s and 40 s. The degree of spalling and vitrification on the surface was primarily dependent on the laser interaction time and beam power. Furthermore, thermal images were captured to investigate the spatial and temporal distribution of temperature during the scabbling process. Based on the experimental results, the scan speed at which the optical head moved over the concrete was set to be 300 mm∙min−1 or 600 mm∙min−1 for the 4.8-kW or 6.8-kW laser beam, respectively. The spalling rates and average depth on the concrete blocks were measured to be 87 cm3∙min−1 or 227 cm3∙min−1 and 6.9 mm or 9.8 mm with the 4.8-kW or 6.8-kW laser beams, respectively.

This study was conducted to estimate the effect of different cutting lengths on fermentation characteristics and aerobic stability of whole crop rice (WCR) silage. The WCR was harvested at the yellow ripe stage (43.7%, DM), and then cut at 5 (R05), 10 (R10), and 20 cm (R20) of the theoretical length of cut with no cut WCR (R60). Each forage was ensiled into 20 L mini bucket silo (5 kg) for 150 days in quadruplicates. The cutting lengths were not affected the chemical compositions of WCR silage (p > 0.05). The pH (p < 0.001) and concentration of ammonia-N (p = 0.022) in WCR silage were increased linearly with the increase of cutting length. The concentration of lactate had quadratic effect (p = 0.007), which was highest in R20 silage (p < 0.05). The concentration of acetate was increased linearly (p = 0.014), but the concentration of butyrate was decreased linearly (p = 0.033). The lactic acid bacteria count was decreased linearly (p = 0.017), and yeast count had quadratic effect (p = 0.009), which was the highest in R20 silage (p < 0.05). Aerobic stability had strong quadratic effect (p < 0.001), which was the highest in R20 silage (p < 0.05). In conclusion, R60 silage had highest pH by a linear increase of ammonia-N concentration and led to low aerobic stability. While R20 silage had the lowest pH by high lactate concentration and led to high aerobic stability.

To increase the selection efficiency for new cultivars in cut roses during breeding programs, phenotypes of seedlings in two cross combinations, C1 (Rosa hybrida ‘Yellow King’ x ‘Aladin’) and C2 (R. hybrida ‘Evelien’ x ‘Sunny Isle’), were investigated. Although most seedlings showed classic-type flower shapes, some (0.4% - 0.7%) had tomato-shaped flowers, especially at the young plant stage (6 months old). The variation in petal color was high, and pink and pink-mixed flowers were dominant, accounting for 72% in C1 and 76% in C2 at the mature plant stage (13-month-old plants). However, the seedlings had changes in the expression of petal color at different growth stages. The number of petals at the young plant stage had a strong positive correlation with those at the mature plant stage in C1 (r = 0.84***) and C2 (r = 0.73***). Sizes of flowers and petals increased with the growth of the seedlings, and their traits at the young plant stage had positive correlations with those at the mature plant stage in both C1 (r = 0.32***) and C2 (r = 0.39***). Prickle expression on stems was mostly in level 5 at the young plant stage and then dispersed to various classes at the mature plant stage, which increased the variation and coefficient of variation. To select seedlings for new cultivars through breeding processes, breeders should consider the growth stage for targeted traits.

Inflammatory bowel disease (IBD) is a chronic inflammatory disorder of the colon and rectum with intervals of acute exacerbation. Its etiology remains unknown, although recent studies suggest that pro-inflammatory cytokines initiate the inflammatory responses. In this study, we investigated the ameliorative effects of YB-21 (new product containining Lactobacillus plantarum, Barley Bran and Nymphaeaceae) in a dextran sulfate sodium (DSS)-induced colitis in mice. The experimental groups were divided into 6 groups (n = 10) of ICR mice: normal control(NC), DSS-treated(PC, positive control), DSS+latic-L-treated (3×107CFU/ml), DSS+latic-M-treated (3×109CFU/ml), DSS+latic-H-treated (3×1011CFU/ml), and DSS+YB-21-treated. Histological examinations indicated that YB-21 suppressed edema, mucosal damage, and the loss of crypts induced by DSS. Moreover, YB-21 reduced serum level expressions of, tumor necrosis factor-α (TNF-α). These results suggest that YB-21 has an anti-colitic effect by the suppression of intestinal inflammatory responses in DSS-induced colitis in mice.

This study aims to investigate the effect of an aluminum chromium nitride (AlCrN) coating on tool wear and hole quality in the conventional drilling process of carbon fiber-reinforced plastic (CFRP) composites, titanium alloy (Ti), and CFRP–Ti stack workpieces popular in the aerospace industry. The advanced arc plasma acceleration (APA) method of physical vapor deposition (PVD) was used for all AlCrN coatings. The drilling experiments were conducted with uncoated drills as well as AlCrN-coated drills. When drilling CFRP only, the AlCrN coating was removed at the drill cutting edges and the margin area, which suggests the carbon fibers abraded the coatings. When drilling Ti only, the AlCrN-coated drill mitigated the Ti adhesion formation, which resulted in less tool wear. In addition, hole quality for both CFRP and Ti was improved when the coating was used versus the uncoated tool. The machinability of CFRP–Ti stacks in the drilling process was improved by utilizing the advanced AlCrN coating on the WC tool in terms of drilling forces and hole quality parameters such as average hole size, average hole roundness, hole surface roughness, and Ti exit burr height.