Corporations, governments, and non-profits across the world have implemented proenvironmental campaigns to promote sustainable practices. To better understand crosscultural differences in environmental persuasion, we draw on research on self-conscious emotion (Tangney & Dearing, 2002), construal level theory (Trope & Liberman, 2010), and cultural psychology (Ratner, 2000). The current research examines how the emotions of guilt and shame cause people from Eastern and Western cultures to differently perceive green advertising messages that are framed concretely or abstractly. Two hundred fifty-five undergraduate students were randomly assigned to a 2 (emotion priming: guilt vs. shame) x 2 (construal message frame: abstract vs. concrete message) x 2 (nationality: Americans vs. Koreans) between-subjects design. The results indicate that message concreteness effect is present among guilt-primed Americans and shame-primed Koreans (culturally relevant), but absent among shame-primed Americans and guilt-primed Koreans (culturally irrelevant). Theoretical and practical implications are discussed for developing global green advertising message strategies.

The objective of this study was to investigate the dynamic neural mobilization program on the changes in muscle activity and nerve conduction velocity (NVC) in stroke patients. The participants were sampled and randomly divided into experimental group I (n=12) who underwent arm neural mobilization and experimental group II (n=13) who underwent arm dynamic neural mobilization. As the pretest, peripheral NVC of the radial, median, and ulnar nerves were measured using the Viking Quest; the biceps brachii, brachioradialis, flexor carpi radialis, and extensor carpi radialis activities were measured with sEMG. Each intervention program consisted of 10 trials per set and three sets per session. The intervention programs were performed once daily for four weeks (four days/week). Posttest measurements were taken equally as the pretest measurements. Significant differences in peripheral NVC in all sections of the radial and median nerves and wristbelow elbow and below elbow-above elbow areas of the ulnar nerve, as well as in muscle activity of all muscles except the biceps brachii. These findings indicate that dynamic neural mobilization was effective in increasing peripheral NVC and altering the muscle activity.

The objective of this study was to develop software to predict the kinetic behavior and the probability of foodborne bacterial growth on processed meat products. It is designed for rapid application by non-specialists in predictive microbiology. The software, named Foodborne bacteria Animal product Modeling Equipment (FAME), was developed using Javascript and HTML. FAME consists of a kinetic model and a probabilistic model, and it can be used to predict bacterial growth pattern and probability. In addition, validation and editing of model equation are available in FAME. The data used by the software were constructed with 5,400 frankfurter samples for the kinetic model and 345,600 samples for the probabilistic model using a variety of combinations including atmospheric conditions, temperature, NaCl concentrations and NaNO2 concentrations. Using FAME, users can select the concentrations of NaCl and NaNO2 meat products as well as storage conditions (atmosphere and temperature). The software displays bacterial growth patterns and growth probabilities, which facilitate the determination of optimal safety conditions for meat products. FAME is useful in predicting bacterial kinetic behavior and growth probability, especially for quick application, and is designed for use by non-specialists in predictive microbiology.

The objectives of this study was to evaluate the degradability and digestibility of crude protein (CP), rumen undegradable protein (RUP), and individual amino acids (AA) on six by-product feedstuffs (BPF) (rice bran, RB; wheat bran, WB; corn gluten feed, CGF; tofu residue, TR; spent mushroom substrate from Pleurotus ostreatus, SMSP; brewers grain, BG) as ruminants feed. Three Hanwoo steers (40 months old, 520 ± 20.20 kg of body weight) fitted with a permanent rumen cannula and T-shaped duodenal cannula were used to examine of the BPF using in situ nylon bag and mobile bag technique. The bran CGF (19.2%) and food-processing residue BG (19.7%) had the highest CP contents than other feeds. The RUP value of bran RB (39.7%) and food-processing residues SMSP (81.1%) were higher than other feeds. The intestinal digestion of CP was higher in bran RB (44.2%) and food-processing residues BG (40.5%) than other feeds. In addition, intestinal digestion of Met was higher in bran RB (55.7%) and food-processing residues BG (44.0%) than other feeds. Overall, these results suggest that RB and BG might be useful as main raw ingredients in feed for ruminants. Our results can be used as baseline data for ruminant ration formulation.

This study investigated cytogenetic and hematological and histological characteristics between diploid and spontaneous triploid on Cyprinidae (Crucian carp, Carassius auratus; crucian carp, C. cuvieri and common carp, Cyprinus carpio) in four major rivers of Korea. In our results, DNA contents of triploid Cyprinidae were 50% more than those of diploid Cyprinidae. Also, erythrocyte size of triploid Cyprinidae was 50% larger than those of diploid Cyprinidae. In all sampling rivers, sex ratios of C. auratus were biased to female, and especially, triploid groups of C. auratus were all female groups (p <0.05). In principle, sex ratios of C. cuvieri and common carp were equivalent between male and female.

An Al2O3/AlN bilayer deposited on GaN by atomic layer deposition (ALD) is employed to prepare Al2O3/AlN/GaN metal-insulator-semiconductor (MIS) diodes, and their interfacial properties are investigated using X-ray photoelectron spectroscopy (XPS) with sputter etch treatment and current-voltage (I-V) measurements. XPS analyses reveal that the native oxides on the GaN surface are reduced significantly during the early ALD stage, indicating that AlN deposition effectively clelans up the GaN surface. In addition, the suppression of Al-OH bonds is observed through the ALD process. This result may be related to the improved device performance because Al-OH bonds act as interface defects. Finally, temperature dependent I-V analyses show that the barrier height increases and the ideality factor decreases with an increase in temperature, which is associated with the barrier inhomogeneity. A Modified Richardson plot produces the Richardson constant of A** as 30.45 Acm−2K−2, which is similar to the theoretical value of 26.4 Acm−2K−2 for n-GaN. This indicates that the barrier inhomogeneity appropriately explains the forward current transport across the Au/Al2O3/AlN/GaN interface.

Ground depression/cave-ins due to subsurface cavities have been occasionally occurred in urban area. To prevent the ground cave-ins, a ground penetrating radar (GPR) method was applied and more than 2,000 subsurface cavities were found in Seoul. For each cavity, excavation was carried out to investigate main cause of the cavity and then the site was restored permanently. It was found that this excavation-and-restoration method was not efficient to repair small size cavities. Instead, grouting methods was used to repair the small cavities temporarily. This study evaluated the field applicability of grouting methods on restoring small cavities. Three types of grouting materials were applied on 12 sections and two non-destructive tests were conducted in field. A falling weight deflectometer(FWD) test was conducted to assess the bearing capacity of the site before and after grouting. Ground penetrating radar (GPR) was used to evaluate the extent of the grouting materials to a cavity. From the FWD test results, the bearing capacity of the Section A and B was enhanced by 7.5% and 13.5% while the bearing capacity of the section C was reduced by 11.5%. It was found from the GPR tests that the grouting materials used in the Section B and C could fill the cavity well and also extended to surrounded area due to injection pressure or selfexpansion. In common, the small cavities could be restored quickly, less than 30 minutes per a cavity by the grouting methods. Hence it can be concluded that the grouting methods can be applicable to restore small cavities. However, it needs to consider the application of grouting methods carefully because the grouting methods can be lost through a pipe link to a cavity. Also, excavations can be conducted occasionally in urban roads so that the stiffness of grouting materials needs to soft enough to be excavated and strong enough to support traffic loads.

Since the first development of asphalt emulsion in 1920, the asphalt emulsions have been in existence for almost 100 years. The advantages of asphalt emulsion compared to hot asphalt and cut back binders are related to the low application temperature, compatibility with other water-based binders like rubber latex and cement, and lowsolvent content. Surface active agents(surfactants), also known as emulsifiers or emulsifying agents, are needed to provide the stability required over time. The type of asphalt emulsion is largely divided into two for the mixture which acts as a binder by mixing with the aggregate and for the bonding strength between asphalt pavement layers. The cold recycled asphalt mixture is affected the binding strength between asphalt and aggregate, depending on the properties of the asphalt binder as well as the emulsifier properties. Four kinds of emulsifiers(alkyl amines, ligine amine, fatty amine, alkyl amido polyamines) were used to make emulsified asphalt, and their basic properties (storage stability, cement mixing test, penetration, etc.) and aggregate film separation were measured. As a result, the penetration of the asphalt emulsion made by the type of alkyl amido polyamines emulsifier was measured to be about 10.4% higher, and the stripping of the bitumen-aggregate film was also lower about 21%. This is because polyamine has two or more primary amino groups –NH2 forms a strong binding force.