PU flame-retardant coatings (APHD) containing phosphorous were prepared by blending of hexamethylene diisocyanate-trimer, white pigment, dispersing agent, flowing agent, and previously prepared benzoic acid modified polyester (APTB) that contains phosphorous. Physical properties of the prepared APHD were examined. With the introduction of BZA (contained in APTB), the film viscosity and film hardness of APHD decreased. With the introduction of caprolactone group, the flexibility, impact resistance, accelerated weathering resistance of APTBs increased. Flame retardancy of the coatings was tested. In a vertical burning method, APHD shows 210~313 seconds, and in a 45˚ Meckel burner method, shows 1.3~4.0cm2 of char length, which indicates that the coatings are good flame-retardant coatings. Moreover, the amount of afterglow and flame retardancy of the coatings are decreased with increasing BZA content.

Reaction intermediates PCP/BZA (PBI) and tetramethylene bis(orthophosphate) (TBOP) wer synthesized from polycaprolactone (PCP) and benzoic acid (BZA) and from pyrophosphoric acid and 1,4-butanediol, respectively. Benzoic acid modified polyesters containing phosphorus (APTB-5, -10, -15) were synthesized by polycondensation of the prepared PBI (containing 5, 10, 15wt% of benzoic acid), TBOP, adipic acid, and 1,4-butanediol. The structure and characteristics of APTBs were examined using FT-IR, NMR, GPC, and TGA analysis. The increase of the amount of BZA in the synthesis of APTBs resulted in decrease in average molecular weight and kinematic viscosity. From the TGA analysis of APTBs, it was found that the afterglow decreased with the amount of BZA content at the high temperatures.

Alkaline powder cleaning agents (APCAs) were prepared by blending of Na2CO3 tetrasodium pyrophosphate (TSPP). sodium orthosilicate (Na-OSi), Na-dioctyl sulfosuccinate (303C), Demol C, and MJU-100A (100A). The physical properties of APCAs tested with steel specimen showed the following results. The cleaning powers of APCA-6 (Na2CO3 250g/TSPP 70g/Na-OSi 40g/303C 60g/Demol C 50g/100A 30g mixture) for press-rust preventing oil was 97% and 98% degreasing at 2wt%, 70℃ and 90℃, respectively; for Quenching oil, the cleaning power of APCA-6 was 95% degreasing at 2wt% and 70℃. From the results, it was ascertained that APCA-6 exhibited a good cleaning power. Also low foaming power tests proved that the APCA-6 maintained good defoaming effect.

본 실험은 염과 건조 스트레스를 받은 벼 식물체의 생리학적 반응을 잎의 수분 보유적인 측면에서 조사하여, 벼의 내성품종과 비내성품종을 효율적으로 선발하기 위한 critical level을 밝혀 내성품종 육성에 응용할 수 있는 기초자료를 제공하고자 수행한 시험결과를 요약하면 다음과 같다. 1. NaCl 및 PEG 처리에 의한 벼 식물체의 반응은 일차적으로 뿌리 신장의 억제가 NaCl 처리에 의해 관찰되었으나, PEG 처리에서는 벼 식물체의 뿌리가 PEG 처리 농도를 증가함에 따라 증가하는 경향이 보였다. 2. NaCl 및 PEG 처리에 의한 벼 식물체의 잎의 RWC와 LWP 사이의 상관관계를 조사한 결과, 40 mM NaCl ()와 80 mM NaCl 처리구 () 에서 RWC와 LWP사이에 높은 상관관계가 확인되었으나, PEG 처리에 의한 RWC와 LWP 사이에는 8% PEG 처리구()에서만 상관관계를 보였다. 3. RWC와 LWP사이에 높은 상관의 결과로부터 측정방법이 까다로운 LWP보다 간단하게 측정할 수 있는 RWC를 이용하여 염 및 건조 스트레스에 대한 내성 품종을 선발하는 것이 효율적이라 사료된다. 4. 염에 대한 벼 내성품종을 선발할 경우에는 80 mM NaCl을 처리한 후 48시간째에 선발하는 것이 적합하고, 한발에 대한 내성품종 선발에는 8% PEG를 처리한 후 96시간째에 선발을 하는 것이 효율적이라 사료된다.

In this regard, the newly focused logistics information system makes reducing the expenses of whole logistic available by cutting down the expenses of materials, transportation and stock and also, it allows the company to cut down the procurement expense through the reduced lead-time and rationalize producing plans by eliminating the uncertain orders and fluctuation in procurement. It further more optimizes the efficiency of over all productions by meeting the dead line for delivery to the customers. In the recent environment of globalization where fierce competitions exist between manufacturers, logistics plays important role in the strategies of companies, and managements of companies try their best efforts in establishing the strategy to accomplish the innovative relationship between supply chain channels. Therefore, in this study, we try to suggest the model of consolidated logistics system that is integrated logistics information system with suggesting the better way of logistics and comparative analysis with logistics system to resolve the difficulties numbers of companies face after realizing what logistics information system is in Korea.

The high-solid coatings were prepared by blending the synthesized acrylic resin in the previous paper and hexamethylene diisocyanate-trimer and curing it at room temperature. The characterization of the films of the prepared coatings was performed. The impact resistance, 60℃ specular gloss, cross-hatch adhension, and heat resistance of the films proved to be good, and the pencil hardness and drying time proved to be slightly poor. Especially, there was a remarkable improvement in the heat resistance. This improvement may stem from the regular arrangement of ethyl groups introduced into the acrylic resin. From a viscoelastic measurement using a rigid-body pendulum, curing was accelerated with the Tg value. With the increase in Tg, log damp value was lowered and dynamic viscoelasic Tg of a cured film was increased.

A copolymer 〈HSAs : EA/EMA/2-HEMA/AAEM) which is an acrylic resin containing 70% solid content was synthesized by the reaction of monomers, including ethyl acrylate, ethyl methacrylate, and 2-hydroxyethyl methacrylate with a functional monomer, such as acetoacetoxyethyl methacrylate, which may give improvements in cross-linking density and physical properties of films. The physical properties of prepared acrylic resins, HSA containing AAEM, are as follows : viscosity, 203~550cps ; Mn, 2590~2850 ; and conversion, 82~89%, respectively. It was found from the plotting of Tg versus viscosity and Tg versus molecular weight that viscosity increased with Tg while number averaged molecular weight decreased with increasing Tg.

한외여과막의 분획분자량을 결정하기 위하여 dead-end형 셀내에 평막을 설치하고 분자량 분포가 수천 내지 수백만의 혼합 dextran 수용액으로 투과 실험하였다. 원료 용액과 투과액을 GPC로 분석하여 각 분자량에 대한 배제율을 구하고 90% 배제율에 해당하는 dextran분자량을 분획분자량를 결정하였다. 투과압력을 0.5에서 2.0 bar까지 증가시킬 경우, Millipore사의 PBTK막은 63,000 내지 68,000 daltons로 10% 이내에서 변화하였지만 Millipore사의 PBQK 막 또는 (주)새한의 UE1812막의 분획분자량은 각각 3.5 및 4.3 배 증가하였다. 또한 투과액을 원료용액의 10내지 40%까지 분리막을 증가시키면서 배제율을 측정한 결과, PBTK의 분획분자량은 25% 증가하였다.