본 연구를 통해 국내 미기록속인 그물나비속(Neope)의 검은눈그물나비(Neope muirheadii)를 처음으로 보고한다. 이 종의 채집지 정보와 간단 한 논평을 포함하여, 성충과 생식기의 사진을 함께 제시한다.

Unlike companion cats raised at home, feral cats are more likely to be infected with parasites. Feral cats can transmit parasites not only to other cats but also to pets and people. This study was conducted to investigate prevalence intestinal parasites prevalence through the fecal examination of feral cats in Gunsan City. After making a suspension in Sheather's Sucrose solution, the feces were mixed and centrifuged, and then examined under a microscope. The results were revealed mostly unsporulated oocysts and sporulated oocysts of coccidia, followed by pinworm's eggs, which showed a relatively high infection rate. Scabies and mites were also found in the feces. Due to the behavioral characteristics of cats, they tend to remove the foreign objects from their fur through grooming, which is why a lot of hairs were observed in the feces, and it is thought that this is why scabies and mites were also found in the fecal examination results. The results of this study confirm that feral cats are exposed to those parasites. It is also thought that consideration should be given to expanding the TNVR (trap-neuter-vaccinate-release) program, which can reduce the number of feral cats.

The purpose of this study is to identify factors that influence consumers’ acceptance intentions towards Direct-to-Consumer (DTC) Genetic Testing service. DTC genetic testing service can be considered in two aspects: the application of new technology in genetic testing customers can directly purchase and the services for receiving the test results customer can’t directly analyze. Existing technology-based acceptance models have difficulty fully explaining consumers’ acceptance intentions towards DTC genetic testing services. Therefore, this study aims to propose a new acceptance model considering these two characteristics. A survey was conducted with 377 potential consumers for this research. The analysis revealed that health interest, prior knowledge, subjective norms, innovativeness, perceived usefulness, and perceived value affect consumers’ acceptance intentions. The results obtained through this study can help establish strategies and marketing plans necessary for the diffusion of services, such as DTC genetic testing services, that combine a new technology and a service. In the long term, the accumulated DTC genetic testing results data can contribute to the development of national genetic information infrastructure and preventive medical applications, as well as improve individuals’ quality of life.

This study examines the challenges faced by native English-speaking professors who teach general English courses in Korean universities, specifically focusing on the issue of social marginalization. Data were collected through online surveys and interviews. The findings indicate that these professors view themselves as a non-mainstream group within university faculties, often experiencing exclusion from decision-making processes and professional development opportunities, primarily due to language barriers. Moreover, cultural differences and structural discrimination exacerbate these challenges. Although the respondents did not report significant difficulties related to student education and exhibited a strong sense of efficacy in teaching English, some lacked sufficient understanding of the institutional curriculum. To address these issues, this study suggests that, for foreign professors to fully demonstrate their expertise in English education and foster a sense of belonging within the university community, they should be granted the authority and responsibility to participate in curriculum improvement research, along with administrative assistance.

The purpose of this study is to analyze the characteristic of quality attributes of smart hotels by using a SERVQUAL-IPA model, focusing on Chinese, which has the most proactive approach for the adoption of smart hotel system. Toward this goal, six quality factors—tangibles, reliability, assurance, responsiveness, empathy, and playfulness—were extracted through factor analysis, and IPA was used to appraise the degree of importance and satisfaction for each quality attribute. As a result of the SERVQUAL-IPA model, quality attributes were categorized into four groups of 'keep up the good work,' 'possible overkill,' 'low priority,' and 'concentrate here.'. Furthermore, it was concluded that there is a need to focus on the following elements: ‘smart devices can assist customers in emergency situations’, ‘when the room control system identifies customer needs, the staff can provide prompt service’, ‘development and improvement of mobile applications that enable customers to control room amenities’, ‘regular maintenance for smart devices’, and ‘providing data-driven personalized recommendations through customer activity data analysis’.

본 논문은 모바일 폰 사진을 활용하여 도시 공간에서 전력선과 건물 사이의 거리를 편리하게 모델링하고 측정하는 방법에 중점을 두고 있으며, 이에 대한 정확성을 평가하였다. 모바일 장 치용 2뷰 지오메트리를 사용한 전력선과 건물의 3D 재구성 방법을 설계하여 어디에서나 즉시 측정할 수 있도록 하였다. 특징점을 사용하여 전력선과 건물 사이의 거리를 계산하고 건물 정 보를 활용하여 게임 가상 공간에 전력선과 전주를 배치할 수 있다. 본 논문에서는 대전시 내 10개의 위치에서 실험을 실시하고, 상업용 시스템과 LiDAR가 있는 경우와 없는 경우를 포함 한 이전 방법과의 성능을 평가하였다. 우리의 방법을 스마트폰에 구현했기 때문에 장점은 휴 대성과 저렴함이다.

We aimed to evaluate the effectiveness of ensemble optimal interpolation (EnOI) in improving the analysis of significant wave height (SWH) within wave models using satellite-derived SWH data. Satellite observations revealed higher SWH in mid-latitude regions (30o to 60o in both hemispheres) due to stronger winds, whereas equatorial and coastal areas exhibited lower wave heights, attributed to calmer winds and land interactions. Root mean square error (RMSE) analysis of the control experiment without data assimilation revealed significant discrepancies in high-latitude areas, underscoring the need for enhanced analysis techniques. Data assimilation experiments demonstrated substantial RMSE reductions, particularly in high-latitude regions, underscoring the effectiveness of the technique in enhancing the quality of analysis fields. Sensitivity experiments with varying ensemble sizes showed modest global improvements in analysis fields with larger ensembles. Sensitivity experiments based on different decorrelation length scales demonstrated significant RMSE improvements at larger scales, particularly in the Southern Ocean and Northwest Pacific. However, some areas exhibited slight RMSE increases, suggesting the need for region-specific tuning of assimilation parameters. Reducing the observation error covariance improved analysis quality in certain regions, including the equator, but generally degraded it in others. Rescaling background error covariance (BEC) resulted in overall improvements in analysis fields, though sensitivity to regional variability persisted. These findings underscore the importance of data assimilation, parameter tuning, and BEC rescaling in enhancing the quality and reliability of wave analysis fields, emphasizing the necessity of region-specific adjustments to optimize assimilation performance. These insights are valuable for understanding ocean dynamics, improving navigation, and supporting coastal management practices.

The alternative food market has attracted much attention due to concerns about climate change, increasing consumer awareness of value consumption, and the development of the Food-Tech industry. This study aimed to analyze the factors that drive consumers to purchase alternative food products and identify the mechanisms that can induce consumers to continue buying. We surveyed 1,200 consumers and estimated data using a logit model. The results showed that the presence of vegetarians in the household, environmental concerns, a vegetable-oriented diet, and a mixed diet of meat and vegetables were positively associated with purchasing plant-based alternatives. Of particular interest was the non-linear relationship between respondents’ age and their purchasing experience with plant-based options, with the likelihood of purchasing alternatives increasing with age from the mid-50s onward. These findings suggest that in addition to the growing number of consumers who share the environmental value, which leads to increased interest in and purchase of plant-based alternatives, alternative foods are also health-oriented and meet the needs of older consumers, who are becoming an increasingly important segment of the super-aged society, suggesting the potential for continued growth in the alternative food market.

AR (alkali resistant)-glass fibers were developed to provide better alkali resistance, but there is currently no research on AR-glass fiber manufacturing. In this study, we fabricated glass fiber from AR-glass using a continuous spinning process with 40 wt% refused coal ore. To confirm the melting properties of the marble glass, raw material was put into a (platinum) Pt crucible and melted at temperatures up to 1,650 °C for 2 h and then annealed. To confirm the transparent clear marble glass, visible transmittance was measured and the fiber spinning condition was investigated by high temperature viscosity measurement. A change in diameter was observed according to winding speed in the range of 100 to 700 rpm. We also checked the change in diameter as a function of fiberizing temperature in the range of 1,240 to 1,340 °C. As winding speed increased at constant temperature, fiber diameter tended to decrease. However, at fiberizing temperature at constant winding speed, fiber diameter tended to increase. The properties of the prepared spinning fibers were confirmed by optical microscope, tensile strength, modulus and alkali-resistance tests.

거저리는 식품으로 사용되기 때문에 유충기가 오래 지속되면 더 좋다. 반면에 거저리의 개체수 유지를 위 해 성장을 가속화하기 위해서는 유충이 빨리 성충이 되면 더 좋다. 이 연구에서는 개체군 밀도가 거저리의 발달 시 간에 미치는 영향을 구명하였다. 이를 위해 상단 7 cm, 하단 5 cm, 높이 3 cm 크기의 용기를 사용했다. 거저리는 용기 당 1, 2, 5, 10, 20마리의 밀도로 용기에서 서식하였다. 용기에 밀기울 1 g을 넣고 거저리의 먹이 여부에 따라 라벨을 붙였다. 실험은 세 번 반복되었다. 모든 실험에서 개체군 밀도가 높을수록 유충에서 번데기로의 변환 시간이 짧았 지만 번데기에서 성충으로 변환되는 시간은 크게 다르지 않았다. 또한 먹이가 있는 그룹에서 번데기로의 변환 시간 이 단축되었지만, 성충으로 변환되는 시간에는 차이가 없었다. 이 연구 결과는 유충기를 연장하기 위해 더 낮은 밀 도가 필요하고 더 빠른 속도로 성충이 필요하다면 밀도가 더 높아야 한다는 것을 보여주었다. 결론적으로 거저리의 발달 시간은 개체수 밀도에 의해 제어할 수 있을 것이다.

Carbon fusion is important to understand the late stages in the evolution of a massive star. Astronomically interesting energy ranges for the 12C+12C reactions have been, however, poorly constrained by experiments. Theoretical studies on stellar evolution have relied on reaction rates that are extrapolated from those measured in higher energies. In this work, we update the carbon fusion reaction rates by fitting the astrophysical S-factor data obtained from direct measurements based on the Fowler, Caughlan, & Zimmerman (1975) formula. We examine the evolution of a 20M⊙ star with the updated 12C+12C reaction rates performing simulations with the MESA (Modules for Experiments for Stellar Astrophysics) code. Between 0.5 and 1 GK, the updated reaction rates are 0.35 to 0.5 times less than the rates suggested by Caughlan & Fowler (1988). The updated rates result in the increase of core temperature by about 7% and of the neutrino cooling by about a factor of three. Moreover, the carbon-burning lifetime is reduced by a factor of 2.7. The updated carbon fusion reaction rates lead to some changes in the details of the stellar evolution model, their impact seems relatively minor compared to other uncertain physical factors like convection, overshooting, rotation, and mass-loss history. The astrophysical S-factor measurements in lower energies have large errors below the Coulomb barrier. More precise measurements in lower energies for the carbon burning would be useful to improve our study and to understand the evolution of a massive star.

Background: Sarcopenia refers to a decrease in functional ability due to the loss of skeletal muscle. Sarcopenia can be prevented, delayed, and treated more effectively the sooner the intervention, and muscle mass and strength can be effectively increased through physical exercise and adequate protein intake. Because symptoms of sarcopenia do not appear in the early stages, awareness among healthcare professionals is essential for early diagnosis and subsequent intervention. Objectives: The purpose of this study was to develop sarcopenia questionnaire items and investigate additional factors in Korean clinical practice. Design: Qualitative research. Methods: A qualitative survey was conducted targeting eight physical therapists affiliated with the sarcopenia associations or physical therapists with extensive clinical experience. A preliminary sarcopenia questionnaire and a qualitative survey questionnaire created by the researchers were sent to the participants together. All questions were open-ended. Results: Through a qualitative survey, themes were derived, including barriers to equipment and healthcare reimbursement, the need for awareness of sarcopenia, and improvement of survey questions. Conclusion: The diagnosis and treatment of sarcopenia requires efforts not only from physical therapists, but also from patients, government, and professional societies.

Spasticity, a frequently encountered symptom in patients with upper motor neuron (UMN) syndrome, poses a significant challenge, negatively affecting function, activity, and social engagement. Despite the acknowledged benefits of exercise in the rehabilitation of UMN syndrome, therapy sessions often trigger an unwelcome increase in muscle stretch reflex activity, resulting in considerable muscle tension despite improvements in function and activity levels. Despite the recognized benefits of exercise in UMN syndrome rehabilitation, there's often an undesirable rise in muscle stretch reflex activity during therapy, leading to considerable muscle tension despite improvements in function and activity levels. The challenge lies in identifying effective strategies that enhance function, activity, and participation while curbing excessive muscle tension caused by heightened stretch reflex activity. Spasticity significantly disrupts the daily lives of affected individuals and presents substantial challenges for caregivers. However, existing methods for measuring and evaluating spasticity have their limitations and are susceptible to errors. This article describes both established and innovative methods utilized for quantitative spasticity assessment and management of spasticity, with the overarching goal of improving the definition of spasticity and identifying assessment techniques suitable for clinical application.

Because plastics are cheap and light, their use is indispensable in our daily lives. However, the extensive use of plastics causes the disposal issue. Among various disposal processes, plastic recycling is of great attention because of minimizing waste and harmful byproducts. Herein, we recycle the most popular thermoplastic materials, high-density and low-density polyethylene, producing the anode materials for the Li-ion batteries. The electrochemical properties of the as-recycled soft carbon are investigated to study the energy storage capability as the anode of Li-ion batteries. Our work demonstrates the soft carbon recycled from plastic wastes is a promising anode material.

High-entropy alloys (HEAs) have been reported to have better properties than conventional materials; however, they are more expensive due to the high cost of their main components. Therefore, research is needed to reduce manufacturing costs. In this study, CoCrFeMnNi HEAs were prepared using metal injection molding (MIM), which is a powder metallurgy process that involves less material waste than machining process. Although the MIM-processed samples were in the face-centered cubic (FCC) phase, porosity remained after sintering at 1200°C, 1250°C, and 1275°C. In this study, the hot isostatic pressing (HIP) process, which considers both temperature (1150°C) and pressure (150 MPa), was adopted to improve the quality of the MIM samples. Although the hardness of the HIP-treated samples decreased slightly and the Mn composition was significantly reduced, the process effectively eliminated many pores that remained after the 1275°C MIM process. The HIP process can improve the quality of the alloy.

The development of thermoelectric (TE) materials to replace Bi2Te3 alloys is emerging as a hot issue with the potential for wider practical applications. In particular, layered Zintl-phase materials, which can appropriately control carrier and phonon transport behaviors, are being considered as promising candidates. However, limited data have been reported on the thermoelectric properties of metal-Sb materials that can be transformed into layered materials through the insertion of cations. In this study, we synthesized FeSb and MnSb, which are used as base materials for advanced thermoelectric materials. They were confirmed as single-phase materials by analyzing X-ray diffraction patterns. Based on electrical conductivity, the Seebeck coefficient, and thermal conductivity of both materials characterized as a function of temperature, the zT values of MnSb and FeSb were calculated to be 0.00119 and 0.00026, respectively. These properties provide a fundamental data for developing layered Zintl-phase materials with alkali/alkaline earth metal insertions.

Vitrification, one of the most promising solidification processes for various materials, has been applied to radioactive waste to improve its disposal stability and reduce its volume. Because the thermal decomposition of dry active waste (DAW) significantly reduces its volume, the volume reduction factor of DAW vitrification is high. The KHNP developed the optimal glass composition for the vitrification of DAW. Since vitrification offers a high-volume reduction ratio, it is expected that disposal costs could be greatly reduced by the use of such technology. The DG-2 glass composition was developed to vitrify DAW. During the maintenance of nuclear power plants, metals containing paper, clothes, and wood are generated. ZrO2 and HfO2 are generally considered to be network-formers in borosilicate-based glasses. In this study, a feasibility study of vitrification for DAW that contains metal particulates is conducted to understand the applicability of this process under various conditions. The physicochemical properties are characterized to assess the applicability of candidate glass compositions.