In construction work, safety accidents often occur in combination with unstable physical and human conditions during preparation and execution of work. In Korea, the accident rate is higher to that of any country in the world. Therefore, it is necessary to take measures by fundamental prescription. In this paper, in the case of construction safety management, we tried to find a reasonable alternative through a questionnaire survey to apply to subcontracting and small-scale construction. In conclusion, workers who are well aware of the task could be able to reduce the accident rate by deploying them as safety management officers after receiving the training.

Full embroidery industrial accidents in recent years has shown a declining trend. But disaster embroidery of domestic construction industry were more than 20,000 deaths per year is about 500 people. The government has introduced a construction site often changing the recruitment of new construction based on health and safety as an alternative to road safety education training yisuje of construction workers, daily work periods short. Certificate of Basic OSH Training in Constructions had also been evaluated as successful by reducing the accident rate problem. It is conducted in private educational institutions has occurred on the friction between workers and employers and training costs are difficult to approach workers in the education standards for such facilities due to the superintendent. Educational institutions are institutions that have been caused by excessive competition lowered levels of education. There is also a lack of evaluation that the training is limited to the basic safety knowledge. These details are brought formal safety education purposes only and is introducing the results of other self jyeotgi difficult to reap the proceeds to good effect. In this study, we propose a plan for improving operational problems and enemy status based on research data presented after the Certificate of Basic OSH Training in Construction.

In the construction sites, rush (speedy construction) work have recently been overused because of budget reductions by reducing the construction duration after the long-term economic recession and construction business stagnation with institutional change including the instruction of the duration shortening bidding system and the introduction of the post-construction sales system by the Korea Research Institute for Human Settlements. Due to this, negligent accidents have frequently occurred by forcing manpower, equipment, finance, and material procurement and pressing ahead with impractical construction wok at night according to the reduction of construction schedules. Therefore, this paper has the necessity of this study to seek for alternatives to prevent negligent accidents by finding factors related to rush work in the reality that the importance for preventing negligent accidents is more emphasized while they have not been reduced in construction sites.

This research determined priority of quality improvement of public institution's education service by using ASC for importance and applying Topsis, a multi-standard decision-making method simplifying various attributes and scales of evaluation items and deciding the comparative priority for satisfaction and discussed the differences so as to measure the quality of public institution's educational service and examine the priority of education service' quality improvement. This research classified the characteristics of quality improvement. As a result, it's significant to suggest positive direction and method to improve satisfaction and education service's quality from an angle of demander by analyzing educational satisfaction of education service quality of public education institution and effects on the following improvement.

Now, many studies of industrial field are focusing on the whole optimization of SCM. But, the reason for making simultaneity of the whole system of SCM difficult is reduced scale of studies on ordering area in SCM reducing the complexity. It's an important issue how to allocate orders in the environment of many suppliers under special situation. Through this thesis, this research intends to expect systematic and arranged supply of distribution area which can make a decision while allocating product orders and quantity and maintaining service standard suggested by minimizing total purchase costs.

The purposes of this research are to modelize test system of SM TESTING by ARENA, software, input several items of specimen’s testing process, resources of system and transfer loop, etc, give a hypothesis and then, obtain results reducing the efficiency of the whole system finally by overload of specific facilities in the testing system through the simulation so as to obtain several materials such as specimen and testing facility, transfer loop, etc. by simple and various forms without any necessity of numerical modelization. It will add facilities of over load and reduce facilities with low operation rate, so increase the efficiency of the system.

The goals of enterprises are to use resources efficiently, minimize the costs or reduce unsuitable products with efficient process or production environment and take competitive advantages through efforts such as proper supply of good products, etc. so as to satisfy diversified customers and survive in rough competition. To reduce production costs, it’s inevitable to make unsuitable products during the production in manufacturing process. Therefore, this researcher grasped LED assembly process and drew the results of productivity improvement through process analysis so as to improve productivity by process anlaysis.

In unlimited competition era changed rapidly, productivity improvement and raw cost reduction by working improvement are very important for the survival of middle and small-sized companies. At this moment, middle and small-sized companies are cleary important in domestic industry. Therefore, this researcher applied TPS(Toyota production system) 7 wastes by experiment planning method for wastes of lots of working processes at the manufacturing site of automobile assembly manufacturing company, D company, analyzed current system of D company applied so as to verify if value creation works and factors were minimized during the production and drew results by analyzing experimental planning for analyzing waste elimination.

In global competition composition changing rapidly, domestic industry faces changes and logistics industry, one of service industries, is recognized as an important factor for development of domestic industry and national economy. At this moment, companies must suggest differentiated service, strategies, etc. so as to create and maintain competitive advantages in comparison with other companies. The requirements preannounce big movement of third party logistics market. Therefore, government, logistics industry and academic world have suggested lots of studies so as to vitalized third party logistics market. The purposes of this research are to verify that innovative changes are necessary to be existing in fierce competition of third party logistics market and analyze the effects of third party logistics on logistics outcomes so as to form continuous relations with shipper.

Price quotations for SOR / RFQ from OEM clients is a very important process in the automotive parts industry. However, OEM clients are demanding a price quote on short duration but it takes long delivery time due to sales, research and development, purchasing, production and cost management departments role and jobs focused on detail and responsibility. And to provide a reasonable alternative with eliminating the waste of non-value processes is to achieve OEM clients satisfaction through standardized and parallel processing, IT system based on the systems and processes of global benchmark companies.

Hospital costing has generally been using ABC costing method. However, based on increase of expensive equipment, the fixed cost is increased in the hospital industry. The most common equipment industry are using building block costing method for depreciation and equipment management costing elements. Additionally it presents three options that may be considered to be supported by the IT system to find the most appropriate alternative.

Recently, industrial accidents rate has been gradually decreasing due to the development of safety management methods, but until now, the accident rate in the construction sector is higher than other industries. Large-scale construction sites are operating systematic safety systems to reduce industrial accidents. However, small and medium sized construction sites do not have systematic safety system and lack safety management ability, so that disaster is not reduced compared with large scale construction site. As a result, disaster prevention technology instruction system has been implemented to reduce the disasters of small and medium scale construction sites. However, in the case of a small construction site less than 2 billion won, there is little decrease in the accident rate, and in some cases, the accident rate increases. After the technical guidance system has been implemented, it is necessary to identify the performance and problems of implementation and to improve its effectiveness. In this study, we suggest the improvement plan to improve the efficiency of the technical guidance system by analyzing the problems and actual conditions of technical guidance operation in small and medium sized construction work sites.

In recent years, urban areas occurred several times a sinkhole. In Korea, this limestone area where the sink hole sink holes occur based on not much was seen as a very rare phenomenon. However, the occurrence of accidents in recent Subsidence and urban areas is occurring in the limestone sinkhole may yet see another one called artificial Subsidence phenomenon. Subsidence in urban areas can have various causes, such as depression groundwater level changes due to the influence of soil, underground, etc. underground utilities by anthropogenic actions. But a lot of research on natural sinkhole by geological experts continued steadily since the past Subsidence that occurred in recent years the city has become an urgent problem to formulate a countermeasure to be very concerned about the human and material damage. In this study, the city by analyzing existing research on the causes and countermeasures of Subsidence recently released look at the announced sinkhole, published statistics and cases of Subsidence data, and overseas corresponding practices in each relevant agencies and to suggest measures for local Subsidence.

To promote the efficiency of production process of small and medium sized company, government conducts production information business that collects and analyzes information of production field automatically and helps process' controlling and supervising by supporting costs of purchase, installment, etc. of hard-software and network related to middle and small sized company intending e-Manufacturing of production field with computer and information & communication network. As a result, the number of middle and small sized companies that introduce and manage production information system is increased. Therefore, the purposes of this research are to arrange contents of production information system introduced to solve current problems of middle and small sized companies and analyze effects of small and middle sized companies' introduction through example companies.

The purpose of this study is to understand how to affect the safety behavior to the organization's trustees to investigate the level of safety awareness, safety awareness via the distribution center workers prepare the logistics industry disaster prevention measures. The survey was analyzed data to target by the clothing distribution center employees of 182 people. Analysis First, the level of safety awareness showed on a positive effect on organization trust. Second, it was found on the safety level of consciousness a positive effect on the safety behavior. Third, the level of safety awareness affect the safety behavior showed that the mediating role of organization trust. That is a higher level of safety awareness, such as the strict practice of business activities, investments, safety rules on safety education and training emphasis on safety increases confidence in the organization. It was confirmed the higher the confidence in the safety organization appears behavior such as actively participating in the work carried out in a safe manner, safety education and training. In addition, the effect was mediated by the organizational impact on confidence in the safety of personnel safety awareness actions. Based on that research results prepared safety awareness was raised through the industrial accident prevention measures

This study is to find out the acceptance intention of international logistics platform which meet the needs of each other of shipper and international logistics company in the online. As you may know, the many korean traditional international logistics companies which have to compete with global logistics companies focused on economics of scale, have been in a big trouble. In this circumstances, though they should get used to the change to survive, they do not know what they try to overcome. So, I hope that this study would be helpful to them

This study was aimed to demonstrate how the analysis of the impact on confidence in the safety-conscious organizations target the clothing distribution center employees and organizational commitment. Safety awareness of employees of the clothing distribution center safety rules, safety education, road safety interests, divided into risk handling and trusted organization with the emotional trust and cognitive trust, organizational commitment was divided into affective, cognitive and normative commitment. Data collection was surveyed 185 people clothing distribution center workers, tested the hypothesis through regression analysis. The results are safety conscious exerts a positive effect on organizational trust, organizational trust was found to have a positive impact on organizational commitment.

In addition to improving economic growth and development of advanced production technology brings many benefits to our society, but if the growth of this still has the shadow of accidents exists. In particular, the construction site has seen a significantly higher accident rate figures despite efforts on disaster prevention. Among the various methods of reducing the need for disaster safety education industry it has become very stressed its importance through many studies. When a disaster causes significant share of the construction industry due to the lack of educational causes, including technical causes, managerial causes, classification and educational causes of this ateumyeo safety awareness and knowledge account for large proportion. In the health and safety education, centered on the subjects of education supervisors will be able to reduce the real and effective industrial disaster education should be run.

In the process of construction site accidents disaster a situation is finishing the direction in which most contractors are responsible. Several have way to improve the accountability of the construction participant in a construction site accident, but in particular, prices on improvements to the nakchalje, conducted at the forefront safety awareness to improve the supervision and management supervisor, maps technically allow some advice the knowledge about the technical safety of the safety officer is required and is considered to be especially made by designers and effective safety management from the design phase to improve safety awareness of the Engineer, prime Director and partner Director, hazard safety awareness to improve workers' In order to reduce the is believed necessary.

In addition to improving economic growth and development of advanced production technology brings many benefits to our society, but if the growth of this still has the shadow of accidents exists. In particular, the construction site has seen a significantly higher accident rate figures despite efforts on disaster prevention. Among the various methods of reducing the need for disaster safety education industry it has become very stressed its importance through many studies. When a disaster causes significant share of the construction industry due to the lack of educational causes, including technical causes, managerial causes, classification and educational causes of this ateumyeo safety awareness and knowledge account for large proportion. In the health and safety education, centered on the subjects of education supervisors will be able to reduce the real and effective industrial disaster education should be run.