본 연구의 목적은 온도와 토양수분에 따른 마늘의 생육, 생리장해 및 수량에 미치는 영향을 구명하고자 실시 하였다. 실험은 온도가 6℃ 차이가 나는 온실에서 수행 되었는데, 정식부터 수확까지 외기(A)보다 3℃(A+3℃), 6℃(A+6℃) 고온조건, 토양수분은 적습(OI) 대비 수확기 무렵의 다습(EI) 처리를 하였다. 그 결과, 마늘 생육특성은 온도와 토양수분 조건(0.34m3/m3)에 따라 고도의 유의성을 보여 고온일수록 그리고 적습 처리구일수록 컸다. 초장은 외기보다 A+6℃-OI 처리구에서 47.4cm로 가장 컸으며, 엽장과 엽폭 역시 외기보다 A+6℃-OI 처리구가 각각 16.1cm, 2.4cm로 가장 컸다. 마늘재배 기간 중 외기보다 3℃, 6℃ 고온조건이 되면 스펀지마늘 발생율이 높아져 A+6℃-OI 처리구는 12.9% 발생하였고, A-EI 처리구에서는 전혀 발생하지 않았으며, 인편무게와 1쪽당 무게는 A+6℃ 고온구에서 크게 감소하여 수량이 외기 대비 A+6℃ 처리구는 평균 51%, A+3℃ 처리구는 평균 22% 감소하였다. 따라서, 마늘재배시 외기보다 6℃ 고온조건과 다습조건이 되면 상품수량 감소하고, 생리장해 발생이 많아지는 것으로 나타났다.

TiO2-doped activated carbon fibers (ACFs) were successfully prepared as capacitive deionization (CDI) electrode materials by facile ultrasonication-assisted process. ACFs were treated with titanium isopropoxide (TTIP) and isopropyl alcohol solutions of different concentrations and then calcinated by ultrasonication without heat-treatment. The results show that a certain amount of anatase TiO2 was present on the ACF surface. The specific capacitance of the TiO2-doped ACF electrode was remarkably improved (by 93.8% at scan rate of 50 mV s–1) over that of the untreated ACF electrode, despite decreases in the specific surface area and total pore volume upon TiO2 doping. From the CDI experiments, the salt adsorption capacity and charge efficiency of the sample with TTIP percent concentration of 15% were found to considerably increase by 71.9 and 57.1%, respectively. These increases are attributed to the improved wettability of the electrode, which increases the number of surface active sites and facilitates salt ion diffusion in the ACF pores. Additionally, the Ti-OH groups of TiO2 act as electrosorption sites, which increases the electrosorption capacity.

The purpose of this study is to analyze Alexander Wang’s collections representing the athleisure look, and suggest a multilateral direction for fashion design based on the data. The present study examines literature, journals, and mass media to define the athleisure look and understand the background of its emergence, and assess its key design characteristics. The collections examined are from 2007 fall/winter to 2017 spring/summer, and T by Alexander Wang from 2011 spring/summer to 2016 fall/ winter. A total of 446 photos were collected and verified by a group of experts. The characteristics of the athleisure look in Alexander Wang’s collections were described by the following themes: dynamism (39.46%), unexpectedness (34.30%), sensuality (14.57%), and resistance (11.65%). Results revealed a number of findings: First, regarding the sensuality of the athleisure look found in Alexander Wang’s collections, it was found to exhibit the lines of the human body and highlight sexiness and healthy beauty - with either direct or indirect body exposure. Second, the concept of dynamism is the most frequently seen - utilizing items with a comfortable or loose fit or materials that are flexible to enhance activity. Third, resistance appears as a specific style using aggressive and rough decorations. Alexander Wang’s signature color, black, appears often, and showcases resistance through black clothing and fashion. Fourth, the unexpectedness of the athleisure look found in Alexander Wang’s collections creates its own uniqueness with playful expressions made by various materials’ mixed and matched or made visually fun.

Porcine spermatogonial stem cells (SSCs) prefer three-dimensional (3D) culture systems to 2D ones for the maintenance of self-renewal. Of the many 3D culture systems, agar-based hydrogels are candidates for supporting porcine SSC self-renewal, and there are various types of agar powder that can be used. In this study, we sought to identify an agar-based 3D hydrogel system that exhibited strong efficacy in the maintenance of porcine SSC self-renewal. First, 3D hydrogels with different mechanics were prepared with various concentrations of Bacto agar, lysogeny broth (LB) agar, and agarose powder, and the 3D hydrogel with the strongest alkaline phosphatase (AP) activity and greatest increase in colony size was identified for the different types of agar powder. Second, among the porcine SSCs cultured in the different 3D hydrogels, we analyzed the colony formation, morphology, and size; AP activity; and transcription and translation of porcine SSC-related genes, and these were compared to determine the optimal 3D hydrogel system for the maintenance of porcine SSC self-renewal. We found that 0.6% (w/v) Bacto agar-, 1% (w/v) LB agar-, and 0.2% (w/v) agarose-based 3D hydrogels showed the strongest maintenance of AP activity and the most pronounced increase in colony size in the culture of porcine SSCs. Moreover, among these hydrogels, the strongest transcription and translation of porcine SSC-related genes and largest colony size were detected in porcine SSCs cultured in the 0.2% (w/v) agarose-based 3D hydrogel, whereas there were no significant differences in colony formation and morphology. These results demonstrate that the 0.2% (w/v) agarose-based 3D hydrogel can be effectively used for the maintenance of porcine SSC self-renewal.

본 연구는 배추의 작황 예측프로그램을 개발하기 위한 생육조사로 정식시기를 봄과 가을에 2주 간격으로 3회씩 각각 정식하여, 생체중, 건물중, 엽장, 엽폭, 엽수, 엽면적등을 정식후 2주간격으로 조사하였다. 정식 후 일수에 따른 생체중과 건물중의 변화와 GDD에 따른 생체중, 건물중, 엽면적 그리고 엽수의 변화에 대하여 회귀분석하였다. 정식 후 일수에 따른 봄배추와 가을배추의 생장을 S자형 곡선으로 분석한 결과 생체중의 회귀식은 각각 FW=4451.5/[1+exp{-(DAT-34.1)/3.6}](R2=0.992)과 각각 FW=7182.0/[1+exp(-(DAT-53.8)/11.6)](R2=0.979) 였다. 그리고 GDD에 따른 봄배추의 생체중의 모델은 각각 FW=4411.2/[1+exp{-(GDD-585.2)/128.6}] (R2=0.992) 및 FW=13718/[1+exp{-(GDD-1278.6)/219.5}] (R2=0.981)였다. 봄배추와 가을배추의 단위면적당 생산량은 각각 11348.3kg/10a와 1,5128.2kg/10a로 노지재배의 단수와는 차이를 보인 반면에 봄배추의 경우 시설재배의 단수 1,1147.3kg/10a와 유사한 결과를 보였다. 차후에 노지재 배를 통해, 배추의 생산성에 관여하는 주요 요인을 분석하고, 실시간으로 계측한 생육 및 기상자료를 기반으로 하여 보다 정확한 예측프로그램으로 보정 및 검증해야 할 것이다.

In recent years, not only the cultivation area of Jujube in Korea but also the number of pest species has increased.The farmers farming environmentally friendly are in great difficulty because there are no effective control materials. Thisstudy was conducted to investigate the control effect of the environment friendly materials on two pest species (Caposinasasakii and Spodoptera litura) in jujube orchard. As a result, Sophora extract and paraffin oil showed over 70% controlefficacy to the C. sasakii and Sophora extract show over 90% control efficacy to the S. litura. Therefore, Sophora extractand paraffin oil were thought to be a envionment friendly effctive materials in controlling the C. sasakii and S. litura.

The diamondback moth, Plutella xylostella is one of the world’s major pests. Economic cost to control this pest wasestimated between US$1.3 billion and US$2.3 billion based on management costs. Conservative estimate included yieldloss caused by 5% diamondback moth was estimated US$4 billion-US$5 billion. P. xylostella was managed by chemicalinsecticide such as organophosphates, carbamates and pyrethroids. But insecticide resistance which is caused by repeatedapplication makes it difficult to control this pest. For environmental friendly control of diamondback moth, entomopathogenicfungi could be used as alternative. We conducted bioassay to select high virulent isolate to larva of diamondback mothwith forty six entomopathogenic fungi which were isolated from soil samples by insect-bait method. As a result of bioassaytwelve isolates was selected as candidate. We investigated control efficacy of these twelve isolates with potted Chinesecabbage at laboratory and greenhouse.

Entomopathogenic fungi have been used to control pest as alternative to chemical pesticide. To kill the pest entomopathogenicfungi penetrate cuticle of pest, reach the hemocoel and utilize nutrient of host pest. Finally fungi kill the host by consumingthe host nutrient and physically damaging the tissues. But these process of fungi to control pest is needed so much timeand this point is a disadvantage for fungi. Therefore we studied other application method of fungi to control pest. Weconducted behavior test of beet armyworm to Isaria fumosoroseus which is high virulent against beet armyworm. Adultof the beet armyworm avoided oviposition at Chinese cabbage treated with I. fumosoroseus compare to control and otherhigh pathogenic isolate, Metarhizium anisopliae and this repellency of I. fumosoroseus lasted for 5days in greenhouse.Behavior of larvae to I. fumosoroseus also investigated with choice and non-choice test. Third to fifth instar larvae detectedand avoided fungi. Repellent behavior of larvae to fungi was more noticeable in younger larvae. This result may be usedto prevent the infestation of moth in crop production.

In recent 10 years, mushroom cultivation area and number of cultivators have decreased, but mushroom production tends to increase. This shows that mushroom cultivation is being transformed from log and bed cultivation to bottle cultivation using automated facilities with high productivity per unit area. The bottle cultivation is possible to mechanized and automated, which can save manpower, less damage to pests, can be cultivated throughout the year, and is uniform in quality and advantageous for mass production. However, the investment in production facilities and farm materials is very large compared to the production of logs and bed cultivars, which can lead to large losses in the case of failure to grow. Therefore, it is necessary for the farmers who want to start the bottle cultivation to make careful management decisions by carefully examining the investment cost, the operating cost, and the expected income that are put into the bottle cultivation system. This study was conducted to analyze the management performance of bottle cultivation in mushroom farm and use it as farming decision making data. As a result of analysis of the management performance through farmers' survey, it was found that such as cost of spawn, substrate materials, other material, employment effort, and fuels & electricity power cost accounted for a large proportion of the cost of bottle cultivation.

본 연구는 정식 후 토양의 수분 함량에 따른 배추의 생장과 토양 수분에 따른 배추의 생리 반응 모델 개발을 위한 유효 매개변수를 알아보고자 수행되었다. 처리는 5개 수준으로 각각 0, 200, 300, 400 및 500mL/d/ plant로 매일 1회 관수하여 토양 수분 함량 차이로 구분하였다. 토양수분과 기공전도도를 정식 후 10일부터 6일 간격으로 총 5회 측정하였으며(단, 0과 200mL/d/plant 처리구는 총 3회 측정), 광합성기구 활성을 알아보고자 정식 후 25일에 충분히 관수된 처리구(500mL/d/plant)와 결핍 처리구(0mL/d/plant)에서 이산화탄소 포화 곡선을 작성하였고, 정식 후 38일에 생장을 조사하였다(단, 관수 량 처리구 0과 200mL/d/plant는 위조되어 정식 후 29일에 생장 조사함). 토양수분과 배추의 기공전도도는 밀접한 관계가 있었으며(r2=0.999), 직선의 정의 상관관계로 y = 6097.4x − 4.2984였다. 충분히 관수된 배추의 이산화 탄소 포화곡선은 정상적인 포화 곡선을 보였으나, 토양 수분이 극도로 결핍된 배추는 체내로 이산화탄소가 확산 되어 들어가지 않으며, 광합성 속도도 약 6.5μmol·m-2·s-1 미만으로 급격히 감소하였다. 충분히 관수된 처리구 (500mL/d/plant)에 비하여 토양 수분 결핍구(0mL/d/plant 처리)에서는 약 6.8배 이상 건물생산량이 감소하였다. 그리고 토양의 수분 함량에 따라 엽면적 지수가 로그함수적(y = 16.573 + 3.398 ln x)으로 증가하였고, 결정 계수 r2=0.913로 높은 상관 관계가 있었다. 결과적으로, 정식 초기의 토양 수분 함량이 결핍되면 배추의 생장이 지연 되며, 광합성 속도와 기공전도도가 낮아지는 것으로 밝혀졌다. 또한, 토양수분 함량과 배추 생장 반응 모델을 기공전도도와 엽면적 지수를 변수로 활용하면 정확도가 우수한 모델을 개발할 수 있을 것으로 기대된다.

The objectives of this study were to select the seeds of Cucurbitaceae and Solanaceae genotypes in terms of superior with bioactive compounds content and to inform sophisticated data for developing the high value-added products. We evaluated to aspects of the antioxidant activity, polyphenol content, and flavonoid contents in seeds from two vegetable family. We used in the Cucurbitaceae(watermelon, squash, bitter gourd, and sponge gourd) and Solanaceae(hot pepper, sweet pepper, and egg plant) the total 408 genotypes. In Cucurbitaceae, polyphenol content of watermelon and squash genotypes were ranged 19.9-343.8 and 6.1-81.2 mg·100 g-1 DW, respectively. The polyphenol content of watermelon genotypes was 12% among all genotypes over 160 mg·100 g-1 DW. The mean of flavonoid content in watermelon and squash genotypes represented 80 and 41.3 mg·100 g-1 DW, respectively. In Solanaceae, flavonoid content of hot pepper genotypes was ranged 64.4-472.5 mg·100 g-1 DW, with an average of 165.0 mg·100 g-1. The 23 hot pepper genotypes were classified over 90% antioxidant activity. The antioxidant activity of sweet pepper was ranged 35.9-90.3%, and 23% of all genotypes represented 82% antioxidant activity. The polyphenol and flavonoid content of egg plant was ranged 38.1-642.0 mg·100 g-1 DW and 14.2-1217.0 mg·100 g-1 DW, respectively. In addition, we selected that 8 egg plant with the superior genotypes for antioxidant activity, polyphenol, and flavonoid content. Results revealed that there was significant variation of antioxidant activity and bioactive compounds contents in both vegetable famaily. In addition, we suggested that selected genotypes seeds with high contain bioactive compounds will be more efficiency to develop natural value-added products.

Entomopathogenic fungi have been used as important part of integrated pest management program to control aphid. In particular, Beauveria bassiana was distributed throughout the world including temperate and tropical area, various habitats from alpine soil, desert soil to running water and both insect and plant. Especially the fungus has also been isolated from the surface and the interior of plants and act as natural control agent. Viability of fungi on the plant surface may be influenced by temperature, humidity, sunlight and plant type as well as fungal isolate. Persistence of treated fungal control agent on phylloplane and control efficacy may differ from environmental conditions and isolates. In this study, we investigated the persistence of an B. bassiana which is developing as prototype wettable powder to control cotton aphid, and the residual efficacy of the prototype on cucumber under three different greenhouse conditions.

Cotton aphid, Aphis gossypii Gloever is one of the major pests on a wide range of economically important crops in the world. The sustained use of chemical insecticides to control the aphid has led to the emergence of resistant strains to numerous used insecticides. As an alternative strategy entomopathogenic fungi have been used as part of integrated pest management program to control aphid, especially insecticide-resistance population. In particular, Beauveria bassiana-based commercial bio-insecticide has been used to reduce the pest population under greenhouse conditions in various countries. In this study, we investigated the control efficacy of a prototype of commercial mycopesticide using an B. bassiana (wettable powder) against cotton aphid on potted cucumber plant in greenhouse conditions.

Various arthropods have directly and indirectly threatened human life by transmitting human pathogens such as malaria and Zika virus as well as by damaging crops such as direct feeding and transmission of plant pathogens. According to WHO, vector-borne diseases account for over 17% of all infectious diseases and there are over 1 million deaths from the diseases such as malaria, dengue, etc., globally. About 13% of total crop production is destroyed by agricultural pests during crop production and storage. To control medical or agricultural pests chemical pesticides have been used, but recently because of concerns about environmental pollution and human health the demands for eco-friendly control method are increasing. Insect pathogens are good alternative candidates instead of chemicals. Over 50 entomopathogens including viruses, bacteria, fungi and nematodes are now commercially used as microbial pesticides. Entomopathogenic fungi have also been evaluated as control agents for a diverse insect pests such as aphid, moth, thrip, whitefly, mosquitoes, tick, etc. We will discuss a development of microbial pesticides using, especially, entomopathogenic fungi to control noxious arthropods to agricultural crops and human.

Even though klotho deficiency in mice exhibits multiple aging-like phenotypes, studies using large animal models such as pigs, which have many similarities to humans, have been limited due to the absence of cell lines or animal models. The objective of this study was to generate homozygous klotho knockout porcine cell lines and cloned embryos. A CRISPR sgRNA specific for the klotho gene was designed and sgRNA (targeting exon 3 of klotho) and Cas9 RNPs were transfected into porcine fibroblasts. The transfected fibroblasts were then used for single cell colony formation and 9 single cell–derived colonies were established. In a T7 endonuclease I mutation assay, 5 colonies (#3, #4, #5, #7 and #9) were confirmed as mutated. These 5 colonies were subsequently analyzed by deep sequencing for determination of homozygous mutated colonies and 4 (#3, #4, #5 and #9) from 5 colonies contained homozygous modifications. Somatic cell nuclear transfer was performed to generate homozygous klotho knockout cloned embryos by using one homozygous mutation colony (#9); the cleavage and blastocyst formation rates were 72.0% and 8.3%, respectively. Two cloned embryos derived from a homozygous klotho knockout cell line (#9) were subjected to deep sequencing and they showed the same mutation pattern as the donor cell line. In conclusion, we produced homozygous klotho knockout porcine embryos cloned from genome-edited porcine fibroblasts.

본 실험은 종자 가격이 비싼 여주를 삽목하여 증식하고자 할 때 적절한 줄기 절단위치와 삽목상내 온도를 구명하기 위하여 실험하였다. 시험품종 ‘NS454’(NS)와 ‘드레곤’(DR) 품종을 대상으로 삽수 절단 위치를 3번째 잎의 마디를 절단한 처리(I) 와 3번째와 4번째 잎의 중간없이 발근이 되지 않았다. 뿌리의 개체당 발근수는 DR 품종의 경우, 28oC 처리구는 마디 중간지점을 절단한 처리구에서 5.3개로 처리구중에서 가장 많았고 마디를 절단한 처리구는 2.7개이었다. 따라서 여주의 삽목시 절단위치는 마디부위를 절단하거나 마디 중간지점을 절단해도 되지만 마디 중간지점을 절단하는 것이 생존율을 높일 수 있을 것으로 사료되고, 또한 삽목상내 기온을 28oC 정도를 유지해 주는 것이 바람직할 것으로 판단된다.