A composite photocatalyst of zinc oxide (ZnO) nanoparticles decorated with different content of reduced graphene oxide (rGO) was prepared via a simple and facile one-step method in this paper. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectra, and UV–Vis diffuse reflection spectroscopy (UV–Vis DRS) were used to characterize the crystal structure, morphology and optical properties of the rGO–ZnO composite photocatalyst. The photocatalytic properties of the composites were investigated using methyl orange (MO), a typical orange compound, as a test pollutant. The results showed that rGO–ZnO composites displayed significantly enhanced photocatalytic activity in MO degradation than pure ZnO, and the pseudo-first-order kinetic constant on the optimal rGO–ZnO composite was 14 times as great as that on pure ZnO. The enhanced photocatalytic ability of the rGO-ZnO composites was mainly benefited from the high specific surface area and high conductivity of rGO, which facilitated efficient charge separation in the rGO-ZnO nanocomposite.

Molybdenum disulfide ( MoS2) has been one of the most promising members of transition-metal dichalcogenides materials. Attributed to the excellent electrical performance and special physical properties, MoS2 has been broadly applied in semiconductor devices, such as field effect transistors (FETs). At present, the exploration of further improving the performance of MoS2- based FETs (such as increasing the carrier mobility and scaling) has encountered a bottleneck, and the application of high-κ gate dielectrics has become an effective approach to change this situation. Atomic layer deposition (ALD) enables high-quality integration of MoS2 and high-κ gate dielectrics at the atomic level. In this review, we summarize recent advances in the fabrication of two-dimensional MoS2 FETs using ALD high-κ materials as gate dielectrics. We first briefly discuss the research background of MoS2 FETs. Second, we expound the electrical and other essential properties of high-κ gate dielectrics, which are essential to the performance of MoS2 FETs. Finally, we focus on the advances in fabricating MoS2 FETs with ALD high-κ gate dielectrics on MoS2, as well as the optimized ALD processes. In addition, we also look forward to the development prospect of this field.

Background: The application of Kinesio tape (KT) has become an alternative treatment for the reduction of edema owing to its distinct characteristics that mimic skin behavior. Although many studies have found that KT application has a positive effect on edema related to breast cancer and rehabilitation following mandibular third molar surgery, there is little evidence to support the use of KT for musculoskeletal injuries. Objects: The purpose of this study was to review the literature related to KT application for reducing edema caused by musculoskeletal disorders. Methods: A literature search (July 2022) was performed on PubMed for articles published between January 2012 and June 2022. The following keywords were used: “Kinesio taping,” “Kinesio tape,” “swelling,” and “edema,” with different combinations and derivations. Only articles available in English were included in this study. Results: Among 68 identified studies, seven met our search strategy and criteria and were included in the literature review. Five of these studies investigated musculoskeletal disorders of the knee joint; two of them reported that KT application had a positive effect on edema measured using perimetry following total knee replacement and anterior cruciate ligament reconstruction. However, the KT application did not improve swelling in patients with acute lateral ankle sprains. Pediatric patients with acute proximal phalangeal joint sprain experienced a more significant improvement in the reduction of swelling than the group using a splint. Conclusion: This literature review found discrepant evidence to support using KT for edema control in musculoskeletal disorders. Further research is needed to determine the effectiveness of KT for controlling edema following musculoskeletal injuries.

Acrylonitrile–butadiene–styrene (ABS) terpolymer was compounded with short carbon fiber (CF) and carbon nanotube (CNT) using a micro-extruder followed by the injection molding process. Composite samples were fabricated with loading ratios of 20 wt.% CF and 0.1, 0.5 and 1.0 wt.% of CNT. Mechanical, electrical, thermo-mechanical, thermal, melt-flow, and structural investigations of ABS-based composites were conducted by performing tensile, impact, hardness, and wear tests, conductive atomic force microscopy (AFM), dynamic mechanical analysis (DMA), thermal gravimetric analysis (TGA), melt flow rate test (MFR), scanning electron microscopy (SEM) characterization techniques, respectively. According to mechanical test data of resultant composites including tensile and impact test findings, CNT additions led to the remarkable increase in tensile strength and impact resistance for CF reinforced ABS composites. The formation of synergy between CNT nanoparticles and CF was confirmed by electrical conduction results. The conductive path in ABS/CF composite system was achieved by the incorporation of CNT with different loading levels. SEM micrographs of composites proved that CNT nanoparticles exhibited homogeneous dispersion into ABS matrix for lower loadings.

Organic reagent is considered as one of the most promising reductants for deeply removing vanadium (V) trichloride oxide ( VOCl3) from crude titanium tetrachloride ( TiCl4). Nevertheless, indeterminate active component and unclearly removal mechanisms appear to be the obstacles to separate VOCl3 from TiCl4 using organic reagent. Herein we conduct the experiment to explore it. Firstly, the organic reagents are obtained from enterprise (noted as EOR1– EOR7), and then it is determined that carbon aromatic ( CA) is the active component for removing VOCl3. Furthermore, modified organic reagents (noted as MOR1– MOR4) are prepared via adding aromatic hydrocarbon oil and stearic acid to EOR7, then indicating that MOR3 is endowed with the best capacity to remove VOCl3. In addition, the residues obtained from distillation experiment are comprehensively analyzed (using X-ray diffraction (XRD), transmission electron microscope (TEM) and scanning electron microscope (SEM) etc.), revealing that porous amorphous carbon that deriving from MOR, plays an excellent role in removing VOCl3 from TiCl4 system. Therefore, the removal mechanisms can be explained like that porous amorphous carbon reduces VOCl3 into insoluble vanadium (III) chloride ( VCl3) and vanadium (IV) oxide dichloride ( VOCl2), and then they are separated via adsorption process, with the help of porous amorphous carbon.

A porous-carbon material UiO-66-C was prepared from metal–organic frameworks UiO-66 by carbonization in inert gas atmosphere. Physicochemical properties of UiO-66-C materials were well characterized by Powder X-ray diffraction (PXRD), Scanning electron microscope (SEM), Fourier-transform infrared spectroscopy (FT-IR), Raman spectrometer, N2 adsorption/ desorption isotherms (BET), and the adsorption properties of the products were studied UiO-66-C has a high specific surface area up to 1974.17 m2/ g. Besides, the adsorption capacity of tetracycline could reach 678.19 mg/g, the adsorption processes agreed well with the pseudo-second-order kinetic model and Langmuir isotherm model.

This article presents recent advancements in the development of flexible piezoresistive strain sensors based on carbon nanotubes (CNTs)–polymer composites, with particular attention to their electromechanical properties. Various fabrication approaches and material preparation of CNTs–polymer composites with improved piezoresistive performance are introduced. Moreover, the article presents the working principle of the piezoresistive sensors in terms of the tunneling effect and disconnection-reconnection mechanism. The sensing performances of recently reported applications are studied. This work also reveals that the CNTs–polymer composites have great potential for flexible, skin-mountable, and wearable electronics applications. Finally, possible challenges for the future developments of CNTs–polymer composites are discussed.

Background: During postural control, older adults are more dependent on proprioception than are young adults. Ankle proprioception, which plays an important role in maintaining postural balance, decreases with age. Published studies are insufficient to establish a significant age difference in postural sway resulting from the known age-related decrease in ankle proprioception and do not examine various detailed test conditions. Objects: The present study aimed to compare ankle proprioception between older and younger groups along dimensions of position vs. force proprioception and dorsiflexion vs. plantarflexion. The present study also aimed to compare postural sway between young and older women during quiet standing under two sensory conditions. Methods: We recruited seven young women aged 21–24 and seven older women aged 60–63. Ankle proprioception was assessed as the accuracy of the joint position sense (JPS) and the force sense (FS). Postural sway was assessed using center-of-pressure measurements recorded during quiet standing under two sensory positions: eyes open and eyes closed with head tilted back. Results: Older women had lower JPS in dorsiflexion and lower FS in plantarflexion than did younger women. We found no significant age differences in JPS in plantarflexion or in FS in dorsiflexion. We observed a main effect of group on postural sway in two sway parameters out of three. We observed significant differences in JPS with dorsiflexion, and in FS with plantarflexion. Conclusion: Proprioception for ankle plantar flexor decreased more significantly with aging than did that for ankle dorsiflexor, accounting for the impaired postural balance observed in older women.

Porous basalt aggregate is commonly used in roadbed engineering, but its application in concrete has rarely been studied. This paper studies the application of porous basalt in concrete. Porous basalt aggregate is assessed for its effects on mechanical strength and durability of prepared C50 concrete; because it has a hole structure, porous basalt aggregate is known for its porosity, and porous basalt aggregates can be made full of water through changing the content of saturated basalt; after full-water condition is achieved in porous basalt aggregate mixture of C50 concrete, we discuss its mechanical properties and durability. The effects of C50 concrete prepared with basalt aggregate on the compressive strength, water absorption, and electric flux of concrete specimens of different ages were studied through experiments, and the effects of different replacement rates of saturated porous basalt aggregate on the properties of concrete were also studied. The results show that porous basalt aggregate can be prepared as C50 concrete. For early saturated porous basalt aggregate concrete, its compressive strength decreases with the increase of the replacement rate of saturated aggregate; this occurs up to concrete curing at 28 d, when the replacement rate of saturated basalt aggregate is greater than or equal to 40 %. The compressive strength of concrete increases with the increase of the replacement rate of saturated aggregate. The 28 d electric flux decreases with the increase of the replacement rate of saturated aggregate, indicating that saturated porous basalt aggregate can improve the chloride ion permeability resistance of concrete in later stages.

Background: The gastrocnemius tightness can easily occur. Gastrocnemius tightness results in gait disturbance. Thus, various interventions have been used to release a tight gastrocnemius muscle and improve gait performance. Moreover, focal muscle vibration (FMV) has recently been extensively researched in terms of tight muscle release and muscle performance. However, no study has investigated the effects of FMV application on medial gastrocnemius architectural changes. Objects: In this study, we aimed to investigate the effects of FMV on medial gastrocnemius architecture in persons with limited ankle dorsiflexion. Methods: Thirty one persons with <10° of passive ankle dorsiflexion participated in this study. We excluded persons with acute ankle injury within six months prior to study onset, a history of ankle fracture, leg length discrepancy greater than 2 cm, no history of neurological dysfunction, or trauma affecting the lower limb. The specifications of the FMV motor were as follows: a fixed frequency (fast wave: 150 Hz) and low amplitude (0.3–0.5 mm peak to peak) of vibration; the motor was used to release the medial gastrocnemius for 15 minutes. Each participant completed three trials for 10 days; a 30-second rest period was provided between each trial. Medial gastrocnemius architectural parameters [muscle thickness (MT), fiber bundle length (FBL), and pennation angle (PA)] were measured via ultrasonography. Results: MT significantly decreased after FMV application (p < 0.05). FBL significantly increased from its baseline value after FMV application (p < 0.05). PA significantly decreased from its baseline value after FMV application (p < 0.05). Conclusion: FMV application may be advantageous in reducing medial gastrocnemius excitability following a decrease in the amount of contractile tissue. Furthermore, FMV application can be used as a stretching method to alter medial gastrocnemius architecture.

Highly luminescent carbon quantum dots (CQDs) are developed as fluorescent probes for selective detection of the heavy-ion Fe3+, where the CQDs exhibit excellent nontoxicity, functionalizability, sensitivity, and selectivity. Biomass-based CQDs and nitrogen-doped CQDs (N-CQDs) are synthesized for the selective detection of Fe3+ by using H2O2 as an oxidant and polyetherimide (PEI) as a nitrogen precursor by a green hydrothermal synthesis method. The prepared CQDs and N-CQDs exhibit an elliptical morphology and with an average particle size of 7 and 4 nm, respectively, and emit blue photoluminescence at 445 and 468 nm under excitation at 367 and 343 nm, respectively. The CQDs and N-CQDs exhibit good water solubility because of the abundant hydroxyl and carboxyl/carbonyl groups and graphic/pyrrolic/pyridinic nitrogen on the surfaces, giving rise to a quantum yield of about 24.2% and 30.7%, respectively. Notably, the Matrimony vine-PEI-based CQDs exhibit excellent Fe3+ selectivity and sensitivity relative to the Matrimony vine-based CQDs due to complexation of the numerous phenolic hydroxyl groups and nitrogen-containing groups with Fe3+, leading to increased fluorescence quenching, which greatly improves the sensitivity of detection. The minimum detection limit was 2.22 μmol L− 1 with a complexation constant of 44.7.

Background: Postural control deficit is a major characteristic in patients with chronic ankle instability (CAI). Elastic ankle tapings are commonly used to facilitate postural control in patients with CAI as well as prevent relapse of a lateral ankle sprain. However, equivocal evidence exists concerning the effect of elastic ankle taping on postural control. Objects: This study aimed to evaluate the effects of elastic ankle tapings using kinesio taping (KT) and dynamic taping (DT) on static and dynamic postural control in patients with CAI. Methods: Fifteen subjects with CAI were participated in this study. The participants performed tests under three conditions (barefoot, KT, and DT). Static postural control was evaluated using the one-leg standing test (OLST) and dynamic postural control using the modified Star Excursion Balance Test (mSEBT). One-way repeated-measures analysis of variance was used to compare center of pressure (CoP) data and normalized mSEBT reach distances among the three conditions (with α = 0.05). Results: The CoP parameters (path length, ellipse area, and mean velocity) of the OLST significantly decreased on applying KT and DT compared with those when barefoot. The normalized reach distances in the anteromedial (AM), medial (M), and posteromedial (PM) directions of the mSEBT significantly increased with DT compared to that in the control condition. Further, the higher reach distances with KT compared with those in the control condition were obtained in the M and PM directions of the mSEBT. No significant differences were identified in any of the OLST and SEBT parameters between the two different taping applications. Conclusion: KT and DT improved static postural control during the OLST compared with the control condition. Moreover, these tapes improved dynamic postural control during the mSEBT compared to the control. Therefore, elastic ankle tapings are useful prophylactic devices for the prevention and treatment of ankle sprain in people with CAI.

Background: Muscle undergoes change continuously with aging. Sarcopenia, in which muscle mass decrease with aging, is associated with various diseases, the risk of falling, and the deterioration of quality of life. Obesity and sarcopenia also have a synergy effect on the disease of the older adults. Objects: This study examined the risk factors for sarcopenia, sarcopenic obesity, and sarcopenia without obesity and developed prediction models. Methods: This machine-learning study used the 2008–2011 Korea National Health and Nutrition Examination Surveys in the analysis. After data curation, 5,563 older participants were selected, of whom 1,169 had sarcopenia, 538 had sarcopenic obesity, and 631 had sarcopenia without obesity; the remaining 4,394 were normal. Decision tree and random forest models were used to identify risk factors. Results: The risk factors for sarcopenia chosen by both methods were body mass index (BMI) and duration of moderate physical activity; those for sarcopenic obesity were sex, BMI, and duration of moderate physical activity; and those for sarcopenia without obesity were BMI and sex. The areas under the receiver operating characteristic curves of all prediction models exceeded 0.75. BMI could predict sarcopenia-related disease. Conclusion: Risk factors for sarcopenia-related diseases should be identified and programs for sarcopenia-related disease prevention should be developed. Data-mining research using population data should be conducted to enhance the effectiveness of early treatment for people with sarcopenia-related diseases through predictive models.

During the COVID-19 pandemic, the obligatory wearing of masks has led to increased consumer demand and the diversification of mask design. Accordingly, it is necessary to understand the inner meaning and characteristics of masks in the pandemic situation. Therefore, the purpose of this research is to analyze the characteristics of fashionable masks and their new cultural meaning under the COVID-19 pandemic. This research is based on literature review and empirical research. Drawing on an investigation of the historical evolution of masks and their transition under the pandemic (exhibiting differences in mask culture among countries and regions), this study analyzed 54 distinctive fashion masks designed by fashion brands and influencers that appeared from January 2020 to January 2021. The characteristics of fashion masks identified under the influence of the pandemic are as follows: Message delivery on political issues and human rights; psychological defense and expression of individuality; and conspicuous display via luxurious materials and luxury brand logos; moreover, the design of the mask uses the same material, color, pattern, decoration, and other methods as clothing to achieve the overall style. Over the course of the pandemic (and even in post-pandemic lifestyle), fashion masks are becoming more diversified conveying new social and cultural meanings.