검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 984

        81.
        2022.12 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Numerical modeling and scenario composition are needed to characterize the geological environment of the disposal site and analyze the long-term evolution of natural barriers. In this study, processes and features of the hydro-mechanical behavior of natural barriers were categorized and represented using the interrelation matrix proposed by SKB and Posiva. A hydro-mechanical coupled model was evaluated for analyzing stress field changes and fracture zone re-activation. The processes corresponding to long-term evolution and the hydro-mechanical mechanisms that may accompany critical processes were identified. Consequently, practical numerical methods could be considered for these geological engineering issues. A case study using a numerical method for the stability analysis of an underground disposal system was performed. Critical stress distribution regime problems were analyzed numerically by considering the strata’s movement. Another case focused on the equivalent continuum domain composition under the upscaling process in fractured rocks. Numerical methods and case studies were reviewed, confirming that an appropriate and optimized modeling technique is essential for studying the stress state and geological history of the Korean Peninsula. Considering the environments of potential disposal sites in Korea, selecting the optimal application method that effectively simulates fractured rocks should be prioritized.
        6,300원
        82.
        2022.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문에서는 외계 행성에서 주어진 임무를 모두 수행하여 클리어하는 탑 뷰 슈팅 게임을 제안한다. 제안 하는 게임을 진행한 플레이어 45명의 로그 기록과 설문 조사 결과를 분석하여, 몰입감, 플레이 패턴의 다양 성, 접근성을 중심으로 제안하는 게임의 특징을 살펴보고자 한다. 첫째, 제안한 게임은 더 높은 몰입감을 위 해 스토리 애니메이션과 오디오를 제공한다. 실험 결과 시각, 청각적 방면으로 몰입감을 효과적으로 제공하 고 있어 대다수의 플레이어가 스토리 애니메이션을 건너뛰지 않고 끝까지 시청했다. 둘째, 제안하는 게임은 더 다양한 플레이 패턴으로 즐길 수 있다. 실험 결과 수많은 경우의 수가 존재하는 무기와 스킬을 선택할 수 있게 하였기 때문에 대부분의 플레이어가 선택하는 스킬들이 서로 겹치지 않고 다양한 방식으로 게임을 플레이할 수 있다. 플레이 패턴이 다양한 만큼 더 게임을 오랫동안, 더 재미있게 즐길 수 있다. 셋째, 제안한 게임은 맵을 비교적 단순하게 구성하였다. 그런데, 호기심 많은 일부 플레이어들이 미션과 직접 관련이 없는 경로를 찾아서 길을 헤매는 경우가 나타났다. 이로 인해, 플레이어들이 게임을 다시 한번 진행하고자 하는 경향이 나타났다.
        4,000원
        83.
        2022.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        시금치의 주요 해충인 흰띠명나방(Spoladea recurvalis) 유충의 살충제 5종에 대한 감수성을 검정하였다. Lufenuron EC, chromafenozide EC, chlorantraniliprole WP, tebufenozide WP, pyridalyl EW는 각각 2(12.5 ppm), 4(12.5 ppm), 8(2.5 ppm), 4(20.0 ppm), 8(12.5 ppm)배 의 희석농도에서 90% 이상의 높은 살충활성을 보였다. 추천농도로 경엽처리 후 7일이 경과된 시금치 잎에 흰띠명나방 유충이 72시간 동안 노출되 었을 경우 chromafenozide EC, chlorantraniliprole WP, tebufenozide WP, pyridalyl EW의 살충률은 각각 98.3%, 100%, 95.0%, 100%로 나타나 높은 잔효성을 보였다. 흰띠명나방에 대한 방제효과를 2개소(화성, 연천)에서 포장검정 결과, 5종의 약제 모두 2개소에서 약제처리 7일 경과 후 90% 이상의 방제효과를 보였으며 2배량에서도 약해가 없어 향후 흰띠명나방 방제약제로 시금치에 활용이 가능할 것으로 판단된다.
        4,000원
        88.
        2022.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Nonalcoholic fatty liver disease (NAFLD) is recognized one of the leading metabolic diseases globally, and the younger age population with the disease is rapidly growing, especially in developed countries. Since there has been no approved medicine, losing weight is known to be the only best remedy to control or reverse the disease. Recently, the field of microbiome has attracted much attention to offer more practical choices for patients. Here, we provide experimental evidence that Streptococcus thermophilus LM1012 (LM1012), a safe probiotic strain, is effective for improving NAFLD indexes. In the methionine-choline deficient (MCD) diet induced C57BL/6 mouse model, administration of LM1012 promoted marked reductions of aspartate transaminase (23.8%), total bilirubin (27.8%), hydroxycholesterol (64.2%), triglyceride (29.7%) and IL-1β (68.3%) compared to the MCD diet alone group. Also, the histopathological data imply that LM1012 inhibited fat accumulation and inflammation in the liver, which are the key biomarkers for progression of the disease. Together, these findings suggest that human consumption of LM1012 as a healthy nutritional supplement, may be helpful in reducing the risk of liver damages in NAFLD patients.
        4,200원
        89.
        2022.10 구독 인증기관·개인회원 무료
        We established pretreatment method of solidified cement ion-exchange resin samples generated before 2003 in nuclear power plants for measurement of non-volatile radionuclide activity. A microwave digestion system (MDS) with mixed acid (HCl-HNO3-HF-H2O2) was used to dissolve cement and to desorb non-volatile elements such as Ce, Co, Cs, Fe, Nb, Ni, Re, Sr and U from mixed ion-exchange resin. The content of Ce, Co, Fe, Nb, Ni, Re, Sr, U and Cs after pretreatment of cement plus mixed ion-exchange resin was measured by ICP-AES and ICP-MS, respectively. As iron and strontium are also present in cement, their content after dissolving a certain amount of cement was measured by ICP-AES. All elements except Nb were quantitatively recovered. Especially since the Nb recovery was low at 72.0±2.5%, the MDS following addition of the mixed acid to the resin was operated once more for desorbing Nb from it. Finally the recovery of Nb was over 95%. This sample pretreatment method will be applied to solidified cement ion-exchange resin samples generated in nuclear power plants for assessment of radionuclide inventory.
        90.
        2022.10 구독 인증기관·개인회원 무료
        Laser cutting has been attracting attention as a next-generation tool in application for nuclear decommissioning. It enables high-speed cutting of thick metal objects, and its narrow kerf width greatly reduces the amount of secondary waste compared to other cutting methods. In addition, it only requires the relatively small cutting head without any complicated equipment, and long-distance cutting apart from a laser generator is possible using beam delivery through optical fiber. And there is almost no reaction force because it is non-contact thermal cutting. For these reasons, the laser cutting is very advantageous for remote cutting. In laser cutting, the irradiated laser power is absorbed and consumed to melt the material of the cutting target. When the applied laser power is greater than the power consumed for melting, the residual power is transmitted to the back of the cut object. This residual power may unintentionally cut or damage undesired objects located behind the cutting target. In order to prevent this, it is necessary to adjust the laser power for each thickness of the target object to be cut, or to increase the distance between the cut target and the surrounding structures so that the transmitted power density can be sufficiently lowered. In this work, safety study on residual power that penetrates laser-cut objects was conducted. Experimental studies were performed to find safe conditions for irradiation power density that does not cause surface damage to the stainless steel by adjusting the laser power and stand-off distance from the target.
        91.
        2022.10 구독 인증기관·개인회원 무료
        Waste containers for packaging, transportation and disposal of NPP (Nuclear Power Plant) decommissioning wastes are being developed. In this study, drop tests were conducted to prove the safety of containers for packaging of the wastes and to verify the reliability of the analysis results by comparing the test and analysis results. The drop height of the waste containers was considered to be 30 mm, which is the maximum lifting speed of a 50 tons crane in the waste treatment facility converted to the drop height. Drop orientation of the containers was considered for bottom-end on drop. The impact acceleration and strain data were obtained to verify the reliability of the analysis results. Before and after the drop tests, measurement of the dose rate and the radiographic testing for concrete wall, and measurement of the wall thickness of steel plate were conducted to evaluate the radiation shielding integrity. Also, measurement of bolt torque, and visual inspection were conducted to evaluate the loss or dispersion of radioactive contents. After the drop tests, the radiation dose rate on the container surface did not increase by more than 20%, and there was no crack in the concrete. In addition, the thickness of the steel plate did not change within the measurement error. Therefore, the radiation shielding integrity of the container was maintained. After the drop tests, the lid bolts were not damaged and there was no loss of pretension in the lid bolts. In addition, there was no loss or dispersion of the contents as a result of visual inspection. In order to prove the reliability of the drop analysis results, safety verifications were performed using the drop test results, and the appropriate conservatism for the analysis results and the validity of the analysis model were confirmed. Therefore, the structural integrity of the waste containers was maintained under the drop test conditions.
        98.
        2022.10 구독 인증기관·개인회원 무료
        The hydro-mechanical behavior of rock mass in natural barriers is a critical factor of interest, and it is mainly determined by the characteristics of the fractures distributed in the rock mass. In particular, the aperture and contact area of the fractures are important parameters directly related to the fluid flow and significantly influence the hydro-mechanical behavior of natural barriers. Therefore, it is necessary to analyze the aperture and contact area of fractures distributed in potential disposal sites to examine the long-term evolution of the natural barriers. This study aims to propose a new technique for analyzing the aperture and contact area using the natural fractures in KURT (KAERI Underground Research Tunnel), an underground research facility for the deep geological disposal of high-level radioactive waste. The proposed technique consists of a matching algorithm for the three-dimensional point cloud of the upper and lower fracture surfaces and a normal deformation algorithm that considers the fracture normal stiffness. In the matching process of upper and lower fracture surfaces, digital images obtained from compression tests with pressure films are used as input data. First, for the primary matching of the upper and lower fracture surfaces, an iterative closest point (ICP) algorithm is applied in which rotation and translation are performed to minimize the distance error. Second, an algorithm for rotation about the x, y, and z axes and translation in the normal direction is applied so that the contact area of the point cloud is as consistent as possible with the pressure film image. Finally, by applying the normal deformation algorithm considering the fracture normal stiffness, the aperture and contact area of the fracture according to the applied normal stress are derived. The applicability of the proposed technique was validated using 12 natural fractures sampled from KURT, and it was confirmed that the initial apertures were derived similarly to the empirical equation proposed in the previous study. Therefore, it was judged that the distribution of apertures and contact areas according to applied normal stress for laboratory-scale fractures could be derived through the technique proposed in this study.
        1 2 3 4 5