검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 944

        101.
        2020.07 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Because the inner environment of greenhouse has a direct impact on crop production, many studies have been performed to develop technologies for controlling the environment in the greenhouse. However, it is difficult to apply the technology developed to all greenhouses because those studies were conducted through empirical experiments in specific greenhouses. It takes a lot of time and cost to develop the models that can be applicable to all greenhouse in real situation. Therefore studies are underway to solve this problem using computer-based simulation techniques. In this study, a model was developed to predict the inner environment of glass greenhouse using CFD simulation method. The developed model was validated using primary and secondary heating experiment and daytime greenhouse inner temperature data. As a result of comparing the measured and predicted value, the mean temperature and uniformity were 2.62°C and 2.92%p higher in the predicted value, respectively. R2 was 0.9628, confirming that the measured and the predicted values showed similar tendency. In the future, the model needs to improve by applying the shape of the greenhouse and the position of the inner heat exchanger for efficient thermal energy management of the greenhouse.
        4,000원
        107.
        2020.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In recent years, studies on various 3D scanner applications, including those on quality control and reverse engineering, have been conducted in the shipbuilding industry. Appropriate scanner selection, scanning environment setting by targets, and data postprocessing are essential for effective 3D scanning projects for small crafts. In this study, a non-contact handheld-type 3D scanner was used for molds and hull products for the 10– 30-ft class of small crafts. Small crafts have fewer geometric features and several glare surfaces; thus, anti-glare and texture feature addition preprocessing is critical. The 3D scanning results are used for geometry quality control of single panels and curved surfaces in craft hulls. Consequently, international rule-based weight estimation calculation sheets have been developed and applied for product weight quality control.
        4,000원
        108.
        2020.06 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        In this study, the effect of tempering on the stretch-flangeability is investigated in 980 MPa grade dual-phase steel consisting of ferrite and martensite phases. During tempering at 300 oC, the strength of ferrite increases due to the pinning of dislocations by carbon atoms released from martensite, while martensite is softened as a consequence of a reduction in its carbon super-saturation. This strength variation results in a considerable increase in yield strength of the steel, without loss of tensile strength. The hole expansion test shows that steel tempered for 20 min (T20 steel) exhibits a higher hole expansion ratio than that of steel without tempering (T0 steel). In T0 steel, severe plastic localization in ferrite causes easy pore formation at the ferrite-martensite interface and subsequent brittle crack propagation through the highly deformed ferrite area during hole expansion testing; this propagation is mainly attributed to the large difference in hardness between ferrite and martensite. When the difference in hardness is not so large (T20 steel), on the other hand, tempered martensite can be considerably deformed together with ferrite, thereby delaying pore formation and hindering crack propagation by crack blunting. Eventually, these different deformation and fracture behaviors contribute to the superior stretch-flangeability of T20 steel.
        4,000원
        109.
        2020.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Recently, interest in technology for eco-friendly energy harvesting has been increasing. Polyvinylidene fluoride (PVDF) is one of the most fascinating materials that has been used in energy harvesting technology as well as micro-filters by utilizing an electrostatic effect. To enhance the performance of the electrostatic effect-based nanogenerator, most studies have focused on enlarging the contact surface area of the pair of materials with different triboelectric series. For this reason, one-dimensional nanofibers have been widely used recently. In order to realize practical energy-harvesting applications, PVDF nanofibers are modified by enlarging their contact surface area, modulating the microstructure of the surface, and maximizing the fraction of the β-phase by incorporating additives or forming composites with inorganic nanoparticles. Among them, nanocomposite structures incorporating various nanoparticles have been widely investigated to increase the β-phase through strong hydrogen bonding or ion-dipole interactions with -CF2/CH2- of PVDF as well as to enhance the mechanical strength. In this study, we report the recent advances in the nanocomposite structure of PVDF nanofibers and inorganic nanopowders.
        4,000원
        110.
        2020.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        경기 북부 내 직거래 매장에서 유통 되는 농산물 207건을 수거하여 잔류농약의 실태를 조사하였다. 로컬푸드와 소비자생활협동조합(생협) 매장을 대상으로 일반농산물 94 건, 친환경농산물 113건의 다소비 채소류를 수거하여 다종농약다성분 분석법으로 GC/ECD, GC/NPD, GC-MS/MS, LC/PDA, LC/FLD, LC-MS/MS를 이용하여 263종의 농약을 분석하였다. 잔류농약이 검출된 검체는 모두 로컬푸드 매장에서 수거한 일반 농산물로 14건의(6.8%) 시료에서 잔류농약이 검출되었고, 그 중 1건에서(0.5%) 잔류농약허 용기준을 초과하였다. 총 16개 농약성분이 검출되었고 검 출된 작물은 시금치, 얼갈이, 깻잎, 아욱, 오이, 부추, 미나리였다. 농약 검출량을 바탕으로 일일섭취추정량(EDI)과 일일섭취허용량(ADI)을 이용하여 위해성 평가를 하였으며, %ADI 값의 범위는 0.0134-61.6259%로 안전한 수준이었다.
        4,000원
        111.
        2020.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study was conducted to figure out the productivity of Italian ryegrass(IRG) and leaching water characteristics based on horse manure compost level in Jeju. This study was conducted for about six months. Six treatments were established : non-fertilizer(NF), chemical fertilizer 100%(CF), horse manure compost 50% and chemical fertilizer 50% combination(Combination), horse manure compost with 50% of nitrogen (50%), 100% of nitrogen(100%), 150% of nitrogen(150%). The highest amount of dry matter yield of IRG was revealed in CF(11,965± 564 kg/ha), and both 150% and Combination were second(p<0.05). Nitrate leaching tended to increase until the third analysis and then decreased. There were not significantly differences among mean nitrate concentrations. The findings of the study suggest that horse manure compost with 50% of nitrogen be applied for IRG as basal fertilization and then 50% of chemical fertilizer be applied as top fertilization.
        4,000원
        112.
        2020.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study was to evaluate winter annual forage crops for yield, and horse palatability under horse grazing during the fall and spring in Jeju. The winter annual forage crops such as Italian ryegrass(IRG), rye, and oat were planted in randomized block design in October 30. The horse grazing was initiated on March 17 of the following year. At the first cutting, the dry matter yield of rye was the highest with 4,600 kg/ha compared to the IRG and oat (p<0.05). But there were no significantly different in the yield of winter annual forage crops after the second and third harvests. The total dry matter yield showed rye 12,593 kg/ha, IRG 10,941 kg/ha, and oat 9,424 kg/ha respectively. The horse intake duration of the IRG was significantly higher than the oat and rye (p<0.05). In the first grazing and the second grazing, the intake duration of the IRG was 853.2 seconds and 989.4 seconds, respectively, with oat at 147.6 seconds, and 73.0 seconds, and rye at 89.4 seconds, and 33.18 seconds. The intake duration of IRG was longer than that of oat and rye (p<0.05). The intake rate of the IRG was 60.0% in the first and 82.8% in the second, and the average intake rate was 71.4%. When considering the maintenance of pastures and the palatability of horses, the IRG is the most suitable forage crop in winter annual forage crops in Jeju.
        4,000원
        120.
        2020.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 L-alanine을 적용한 스크러버의 주류공장 내 CO2 제거효율, 모니터링 데이터 분석/ 평가 및 에너지 저감효율을 평가하였다. 스크러버의 평균 제거율은 90.45%로 10,000 ppm이상의 고농도 CO2가 유입됨에도 제거효율이 뛰어난 것을 확인하였다. 스크러버 작동 후 작업장 내 CO2는 2,000ppm 이 하로 유지하여 약 74% 이상의 이산화탄소 저감 효율을 확인하였다. 또한 소비되는 전력량을 측정한 결과 스크러버 작동 후 230 kWh로 약 7.26%의 에너지가 절감되는 것으로 나타났다. 즉, 본 개발제품을 적용한 결과로 작업장 내 이산화탄소 농도를 외기유입 없이 낮은 농도로 유지함에 따라 근무자의 작업환경을 개선 시킬 수 있었으며 에너지 소비량 또한 저감할 수 있었다. 그러므로 식품, 주류공장 내 고농도 CO2 제거 공 정으로써 스크러버가 유용할 것으로 기대된다.
        4,000원