Compound K(ginsenoside M1) is one of saponin metabolites and has many benefits for human health. This study was to investigate Compound K produced from ginseng crude saponin extract with commercial cellulolytic complex enzyme(cellulase, β-glucanase, and hemicellulase) obtained from Trichoderma reesei. The effect factors(temperature, pH, ginseng crude saponin extract and enzyme concentration, and reaction time) on production of Compound K from ginseng crude saponin extract were determined by one factor at a time method. The selected major factor variables were ginseng crude saponin extract of 2%(w/v), enzyme of 7%(v/v), reaction time of 48 hr. Based on the effect factors, response surface method was proceeded to optimize the enzymatic bioconversion conditions for the desirable Compound K production under the fixed condition of pH 5.0 and 50℃. The optimal reaction condition from RSM was ginseng crude saponin extract of 2.38%, enzyme of 6.06%, and reaction time of 64.04 hr. The expected concentration of Compound K produced from that reaction was 840.77 ㎎/100 g. Production of Compound K was 1, 017.93 ㎎/100 g and 862.31 ㎎/100 g, by flask and bench-scale bioreactor(2.5ℓ) system, respectively.

In this study, the antimicrobial, antioxidant activities and α-glucosidase inhibitory activities of Amphidinium carterae ethanol extract (AE) was evaluated for using as a functional food ingredient. Chlorella ethanol extract (CE) was used to the comparison as a control. Anticancer activities of the AE and CE were analyzed by HepG2 and HT-29 human cancer cell. The AE showed antimicrobial activities for all tested bacterial strains. Whereas, CE showed antimicrobial activities for several tested bacterial strains only. The CE showed higher total phenolics contents, DPPH and ABTS radical-scavenging activities (47.36 mg/g, 22.42% and 28.58%, respectively) than those of AE (8.88 mg/g, 20.16% and 17.69%, respectively). AE showed anti-diabetic effect on α-glucosidase inhibitory activity with dose-dependantly manner. The cell viability of AE (125 μg/mL) on HepG2 and HT-29 human cancer cells were 38.12% and 11.27%, respectively. It was demonstrated that ethanol was efficient solvent for extracting functional components from A. carterae. These results indicated that AE can be described as a good candidate for using as a functional food ingredient.

The microbial composition in Nuruk, a Korean cereal fermentation starter, is a critical factor for the quality and organoleptic properties of traditional alcoholic beverages. This study was aimed at monitoring the compositional change and enzyme activity of culturable lactic acid bacteria (LAB) in two types of Nuruk fermented at different temperatures. All culturable LAB were isolated at various time points (0, 3, 6, 10, 20, and 30 days) and identified by 16S rRNA sequencing. In traditional Nuruk type A (TN-A), which was fermented at 36℃, the population of total culturable LAB during the fermentation period was between 104 and 105 log CFU/mL. On the other hand, the LAB population in traditional Nuruk type B (TN-B) fermented at 45℃ (primary fermentation for 10 days) and 35℃ (secondary fermentation for 20 days) was 102 log CFU/mL; however, these bacteria could not be detected after 6 days. Major LAB strains were identified in both Nuruk types: (1) from the MRS-culture of TN-A, Pediococcus pentosaceus at 3-30 days; (2) from MRS-culture of TN-B, P. pentosaceus at 3 days and Enterococcus hirae at 6 days. The protease activities of the dominant LAB isolated from the TN-A and TN-B cultures were within the ranges of 0.64~1.03 mg/mL and 0.74~0.81 mg/mL (tyrosine content), respectively, whereas the α-amylase activities were 0.75~0.98 mg/mL and 0.78~0.79 mg/mL (amylose content), respectively.

염화칼슘 농도를 달리한 쌈무의 조직감 개선 효과, 물리·화학적 특성 및 관능평가를 비교하였다. 염화칼슘 첨가 후 저장 전 쌈무들의 pH와 총산도 범위는 각각 약 3.8~4.0와 2.7~3.0(%, w/v)이었으며, 28일 동안의 저장기간 동안 저장 온도 4℃와 50℃의 시료들은 저장 전 초기 pH와 총산도의 범위를 유지하였다. 그러나 저장온도 25℃에서 쌈무 시료들은 저장 전 초기 pH 범위보다 0.5가 낮아졌고 총산도는 1.9~2.2(%, w/v)가 증가되어졌다. 염화칼슘의 첨가에 따른 쌈무 시료들의 색도를 측정한 결과, 28일 저장동안 4℃에서 저장된 쌈무 시료들은 현저한 차이를 나타내었으나(△E값 1.66~8.21) 50℃에서 저장된 시료들은 다른 계통의 색으로(△E값 23~27) 큰 변화를 보였다. 쌈무 시료들의 경도에 있어서, 저장온도 4℃와 25℃에서 28일 동안 저장된 쌈무 시료들의 경도는 저장 전 쌈무 시료들의 경도와 큰 차이를 보이지 않았고, 50℃에서는 염화칼슘 처리량이 증가 할수록 경도가 높게 유지되고 있음을 확인 할 수 있었다. 쌈무 시료들의 씹힘성에 있어서는 전반적으로 경도의 결과와 유사한 경향을 보였다. 이로써 염화칼슘처리로 쌈무의 조직감을 향상시킬 수 있음을 확인하였다. 4℃에서 28일 동안 저장된 쌈무 시료들의 관능평가 결과, 0.4% 염화칼슘이 첨가된 쌈무 시료가 맛, 경도와 전반적인 기호도에서 가장 높은 점수를 받아 유통 저장기간 동안 관능품질을 유지하면서 쌈무의 조직감을 유지시킬 수 있는 염화칼슘 첨가량이라 판단된다.

The antifungal activity against cheese fungi by lactic acid bacteria isolated from kimchi was investigated. Eight fungi were isolated from cheese in the cheese ripening room. Two of them were identified as Penicillium and Cladosporium via ITS-5.8S rDNA analysis. Twenty-two species of lactic acid bacteria with antifungal activity were isolated from kimchi. Two of them were identified as Lactobacillus and Pediococcus via 16S rRNA sequence analysis. Of the 22 lactic acid bacteria species, six were selected (L. sakei subsp. ALJ011, L. sakei subsp. ALI033, L. sakei subsp. ALGy039, P. pentosaceus ALJ015, P. pentosaceus ALJ024 and P. pentosaceus ALJ026) due to their higher activity against the eight fungi isolated from cheese in the cheese ripening room; and among the six species, the P. pentosaceus ALJ015 and P. pentosaceus ALJ024 isolates from the Jeonju area kimchi and the L. sakei subsp. ALI033 isolate from the Iimsil area kimchi had higher antifungal activity than the other lactic acid bacteria. The minimum inhibitory concentration (MIC) of L. sakei subsp. ALI033 against the eight fungi isolated from cheese in the cheese ripening room was 62.5 ㎍/mL.

Recently, water surface floating solar power system are few appeared some companies in the country. However, it is the reality of most structures using steel and the problem’s occurred in durability for error of design issues and corrosion. In order to solve these problems, research is being conducted for various materials but performance verification is insufficient. In this study, in order to predict the structural behavior of water surface floating solar power structure and to confirm the safety, it tried to understand the mechanical properties of PFRP, synthetic wood instead of steel.

In this paper, the program finite element analysis We investigated the stress generated by the action of plate loading a load using to model the system exceeds the maximum load design ground anchor to apply 900kN a strength test evaluation it.