Ca2+ 이온으로 부분적으로 치환된 제올라이트 A (|Ca4Na4|[Si12Al12O48]-LTA) 단결정과 Se을 가는 모세관에 넣은 후 523 K 에서 5일동안 반응을 시켜 Se이 흡착된 제올라이트 A 단결정을 합성 하였다. 이 결정의 구조는 294 K 에서 단결정 X-선 회절 기술을 이용하여 Pm3m (a = 12.2787(13) Å) 입방 공간군에 속함을 확인 하였고, Fo> 4s(Fo)를 사용하여 최종 오차 인자를 R1/wR2= 0.0960/0.3483로 정밀화 하였다. 이 구조에서는 4개의 Na+와 4개의 Ca2+ 이온이 모든 6-ring 자리에 채워져 있었으며, 이들 이온들은 모두 6-ring 맞 은편의 3-fold 축상의 결정학적 위치에서 발견되었다. Se 원자들은 뚜렷하게 서로 다른 3개의 결정학적 위 치에서 발견되었다. 단위 세포당 2개의 Se(1) 원자는 sodalite cavity 내 6-ring 맞은편 (Se(1)-Na(1) = 2.53(5) Å), 1개의 Se(2) 원자는 4-ring 맞은편 (Se(2)-O(1) = 2.76(10) Å), 그리고 1개의 Se(3) 원자는 large cavity 내 6-ring 맞은편 (Se(3)-Na(1) = 2.48(5) Å)에 각각 위치하고 있었다. 2가지 형태의 Se2 분자 (Se(1)-Se(1) = 2.37(7) or 2.90(8) Å and Se(2)-Se(3) = 2.91(5)) Å)가 sodalite cavity와 large cavity 내에서 발견되었으며, Se4와 Se8 과 같은 형태의 클러스터가 large cavity 내에 존재할 수 있었다. 이들 클러스터내 Se 원자들 사이의 거리는 기체상태의 Se2 분자내 Se 원자 사이의 거리보다 더 길게 나타났다.

본 연구는 제올라이트 Y (Si/Al = 1.56)에서 Cs+ 이온 교환에 Ca2+ 이온의 경쟁 양이온 효과를 연구하기 위해 수행되었다. 완전히 탈수되고 부분적으로 Cs+ 이온으로 교환된 3개의 제올라이트 Y(Si/Al = 1.56)의 단결정은 혼합이온교환 용액을 사용하여 흐름법으로 제조되었으며, 전체 농도가 0.05 M인 이온교환용액의 CsNO3 : Ca(NO3)2 몰비는 1 : 1 (Crystal 1), 1 : 100 (Crystal 2) 및 1 : 250 (Crystal 3)이다. 이온교환된 단결정을 723 K에서 2일 동안 1 × 10-4 Pa로 진공 탈수시켰으며, 결정구조는 100(1) K에서 입방공간군 Fd3̅m을 사용하여 단결정 싱크트론 X선 회절법으로 해석하고 구조를 정밀화하였다. Crystal 1, 2 및 3의 단위세포당 화학식은 |Cs21Ca27|[Si117Al75O384]-FAU, |Cs2Ca36.5|[Si117Al75O384]-FAU 및 |Cs1Ca37|[Si117Al75O384]-FAU이다. 3개의 결정 모두에서, Ca2+ 이온은 D6Rs 내의 site I을 우선적으로 점유하고 있으며 나머지는 site I’, II’ 및 II를 점유하고 있다. 한편 주어진 이온교환용액의 초기 Cs+ 이온의 농도에 따라 Cs+ 이온의 분포에 중요한 차이가 관찰되었다. Crystal 1에서는 Cs+ 이온이 site II’, II, III와 III’에 위치하고 있으며, Crystal 2에서는 site II, IIIa, IIIb에 위치하고 있다. Crystal 3에서는 Cs+ 이온은 site IIIa 및 IIIb에만 위치하고 있다. 초기 Ca2+ 이온의 농도가 증가하고 Cs+ 이온의 농도가 감소에 따라 Cs+ 이온의 교환정도는 28.0에서 2.7과 1.3 %로 급격히 감소하였다.

In this study, using coke dust from ironwork, the pulse pressure on a pulse air jet bag filter was investigated considering the influence of the pressure loss due to filtration velocity and pressure intervals. The research on the optimal pulse pressure prediction of a pulse air jet type bag filter using coke dust showed the following results. Pressure loss volatility produced by the pulse pressure under low dust concentration(0.5, 1 g/m3) and low face velocity(1.25 m/min) was less than 10 mmH2O. This suggests that the pulse pressure has a low impact on the pressure loss. In contrast, pressure loss volatility under high dust concentration(3 g/m3) and high face velocity(1.75 m/min) was 25 mmH2O. Therefore, pulse pressure with high dust concentration and high face velocity has a strong influence on the pressure loss volatility, compared to the condition of low dust concentration and low face velocity. The optimal pulse pressure of inlet dust concentration(0.5 g/m3) was 6 kg/cm2 under the same face velocity(1.75 m/min). As concentration increased from 1 to 2 g/m3, the pulse pressure gradually reached 5 kg/cm2 thus indicating that the pulse pressure(5 kg/cm2) is pertinent at a high concentration(3 g/m3). The pulse intervals: 20, 25 and 30 sec, which are relatively longer than 10 and 15 sec, corresponded to high pressure loss volatility produced by the pulse pressure. Furthermore, low pressure loss volatility was noted at 5 kg/cm2 of the overall pulse pressure.

Cd2+ 이온으로 교환된 제올라이트 Y 단결정은 294 K에서 |Na75|[Si117Al75O384]-FAU(Na75-Y, Si/Al = 1.56)에 0.05 M인 Cd(NO3)2(pH = 3.65)수용액으로 교환하여 723 K에서 진공 탈수를 통해 준 비하였고(crystal 1) 두 번째 결정은 첫 번째 결정과 같이 준비한 뒤 294 K에서 건조된 벤젠을 72시간 동안 노출시켜 준비했다(crystal 2). 이들의 구조는 싱크로트론 X-선을 이용하여 결정학적으로 확인하 였고 Fo > 4σ(Fo)를 사용하여 최종 오차 인자를 각각 R1/wR2 = 0.040/0.121 그리고 0.052/0.168로 정 밀화하였다. Crystal 1(|Cd36H3|[Si117Al75O384]-FAU)에서 Cd2+이온은 주로 site I과 site IIa에 점유되어 있었고, 이와 더불어 site I’, II’ 그리고 site IIb에도 Cd2+ 이온이 점유되어졌다. Crystal 2(|Cd35(C6H6)24H5|[Si117Al75O384]-FAU)에서 Cd2+ 이온은 다섯 개의 결정학적 자리에 점유되었다. 24개 의 벤젠분자는 supercage 내부에서 두 개의 뚜렷한 자리에서 발견 되었다. 17개의 벤젠분자는 site IIa 에 있는 Cd2+ 이온과 면상에서 서로 상호작용하였고 supercage 안에서 3회 회전축 상에서 발견되었다. 나머지 7개의 벤젠분자는 12-ring 면상에서 골격(framework)산소들과 함께 약한 다수의 정전기적인 작용과 van der Waals 상호작용으로 안정화되어 있었다.

Rapid industrial development has led to a serious problem of pollution in the industrial sector. With the increasing social need for environmental protection, research on air pollution prevention equipment for reducing pollutants in industrial processes is actively being undertaken. The deterioration of existent, installed facilities, their increased emission rates, and the strengthening of the effluent quality standards make complying with permissible emission standards difficult. In fact, installing new electric precipitators or complementing existent facilities is inevitable. The expansion and complementation of the installed electrical precipitators have led to improvements in dust collection efficiency, shorter working times, and lower costs. Because of its easy installation and simple manufacturing process, the production method with the discharge electrode of an electric precipitator is widely used. The following conclusions were reached by classifying discharge electrodes into four types based on the production method and mutually comparing them by their dust collection efficiency. None of the four types used in this study were damaged by impact. However, we were able to confirm some strain from the compression sites of both type A and type B. Both type B and type C are expected to have greater dust collection efficiencies than the other models due to their large vibration transmissibility. Moreover, the high vibrational energy is expected to cause rapping damage during its operation. Particularly, in the case of type B, some of the strain was found at the end of the compression site. The coupling schemes of both type C and type D are out of vibration transmissibility. On the other hand, the ability to maintain straightness and solidity of the side is regarded as outstanding and stable. Type D has outstanding on-site workability, considering the presence of locking, structural stability, and work conditions. From these experiments, we determined that type C is the most ideal connection method of discharge electrode, considering its construction period of renovation. Type C is inferior to type D with regard to on-site workability. However, type C has outstanding dedusting transmission with regard to the straightness, solidity maintenance, and vibration of shearing stress.

국내 경상북도 포항 지역에서 채취한 6종의 천연 제올라이트를 X-선 회절, X-선 형광분석, 열 시차 분석, 열중량 분석 및 양이온교환능 분석을 통해 특성분석을 수행하였다. 이들 제올라이트의 주 성분은 구룡포A (Ku-A), 구룡포B (Ku-B), 구룡포C (Ku-C), 동해A (Dh-A), 동해B (Dh-B), 동해C (Dh-C) 모두 모데나이트, 알바이트 및 석영이 함유되어 있었다. 6종의 제올라이트는 Si, Al, Na, K, Mg, Ca, Fe을 함유하고 있었으며 구룡포C (Ku-C) 제올라이트의 양이온 교환능이 다른 지역의 제올라 이트 보다 높게 나타났다. 6종의 천연 제올라이트를 이용하여 Pb2+, Cd2+ 및 Cu2+ 등의 중금속 이온을 제거하는데 소요되는 반응 시간의 효과를 비교하였다. 6종의 천연 제올라이트 모두 Pb2+, Cd2+ 및 Cu2+ 제거율이 매우 낮게 나타났다. 이는 6종의 천연 제올라이트에 함유된 제올라이트의 함량이 매우 낮기 때문으로 판단된다. 본 연구 결과는 제올라이트 광석의 중금속 흡착능력은 제올라이트의 함량, 즉 광석의 품위에 크게 의존되는 경향을 보여주고 있다.

This study has been carried out to present the valuation system of soil carbon sequestration potentials of soil in accordance with the new climate change scenarios(RCP). For that, by analyzing variation of soil carbon of the each type of agricultural land use, it aims to develop technology to increase the amount of carbon emissions and sequestration. Among the factors which affects the estimation of determining the soil carbon model and influence power after the measurement on soil organic carbon, under the center of a causal relationship between the explanatory variables this study were investigated. Chemical fertilizers (NPK) decreased with increasing the amount of soil organic carbon and as with the first experimental results, when cultivating rice than pepper, the fact that soil organic carbon content increased has been found out. The higher the carbon dioxide concentration, the higher the amount of organic carbon in the soil and this result is reliable under a 10% significance level. On the other hand, soil organic carbon, humus carbon and hot water extractable carbon has been found out that was not affected the soils depth, sames as the result of the first year. The higher concentration of carbon dioxide, the higher carbon content of humus and hot water extractable carbon content. According to IPCC 2006 Guidelines and the new climate change scenario RCP 4.5 and the measurement results of the total amount of soil organic carbon to the crops due to abnormal climate weather, 1% increase in atmospheric carbon dioxide concentration was found to be small when compared to the growing rate of increasing 0.01058% of organic carbon in the soil.

Tetragonia tetragonides is a medicinal plant native to ocean sand soil of southern provinces and has significant effects on the prevention and curing of gastroenteric disorders. Despite of its popularity, supply of the plant has never met the level of demand because of the absence of an adequate culturing method. The present study, thereby, was conducted for classifying the plants with geographically different characteristics, studying growth habits, developing a new culturing method and establishing a large scale propagation system of selected superior individual plants. The study was also aimed for revealing optimum conditions for seed treatment, fertilization, and efficient culturing system and thereby, for utilizing the plant as a new income source for rural communities. The seed was elongated with size of 2.6 mm (width) × 1.8 mm (length). No difference in seed size was observed depending on different inhabitate. Each flower produced about 4.5~4.8 seeds. Germination rate was high for seeds matured for 40 days after fertilization, but deceased to 50% for seeds matured only for 20 or 30 days. Seed dormancy lasted 6 months and seed storage at humid 5℃ facilitated germination. Mechanical obstruct of seed germination was due to seed coat and removal of seed coat enhanced the germination rate. Optimum temp. for seed storage was 5℃, and high germination rate was maintained for 350 days. However, for stratification condition or at room temperature, germination was significantly reduced as storage time increased Optimum treatment of plant growth regulators was soaking in GA3 250 mg/L for 1 hr. The priming treatment with 50 mM Ca(NO3)2 at 20℃ for two days improved the seed germination with 10% compared to non-treated control. The treatment of 20% NaOCl for 3 hr. improved the seed germination rate up to 10% and 1 day ahead.

The purpose of this article is analyzing the economic impacts of abnormal climate on total revenue of red pepper in Korea, with employing the equilibrium displacement model. Our simulation results show the rate of yield change, price change, and total revenue change according to the climate change scenarios. In th case of by RCP 8.5 Scenario, red pepper production volume would be expected to decrease by 77.2% compared to 2012 while price increasing by 29.6%. As a result, total revenue to be returned to farmers would be reduced by 47.6% than it was in 2012. In contrast, total revenue would be expected to decline by 29.6% according to RCP 4.5 scenario.

국내 경상북도 포항 및 경주지역에서 채취한 4종의 천연 제올라이트를 X-선 회절, X-선 형광분석, 열시차 분석, 열중량 분석 및 양이온교환능 분석을 통해 특성분석을 수행하였다. 이들 제올라이트의 주성분은 구룡포(Ku)는 휼란다이트, 포항(Po)은 클라이놉틸로라이트와 석영이 혼합된 모데나이트이며 양북A (Ya-A)는 휼란다이트, 클라이놉틸로라이트 및 석영이 함유된 일라이트이며, 양북B (Ya-B)는 휼란다이트와 클라이놉틸로라이트가 혼합된 일라이트이다. 4종의 제올라이트는 Si, Al, Na, K, Mg, Ca, Fe을 함유하고 있었다. 구룡포 (Ku) 제올라이트의 양이온 교환능이 다른 지역의 제올라이트 보다 높게 나타났다. Cs 및 Sr의 흡착실험은 25 ℃에서 수행하였으며, 흡착자료를 기초로 Langmuir와 Freundlich 흡착 등온식에 대한 적합성을 평가하였다. 흡착공정은 Langmuir 흡착 등온식이 잘 맞았으며, 양북 A 제올라이트가 다른 제올라이트 보다 Cs+ 및 Sr2+ 이온의 제거에 가장 효과적임을 보여주었다.

The purpose of this article is analyzing the economic impacts of abnormal climate on fall chinese cabbage farmers and consumers in Korea, with employing the equilibrium displacement model. Our results show that there were little difference in gross farm income, even though there were significant yield reductions due to abnormal climate changes. However periodic occurrences of abnormal climates caused serious damage to consumption levels which had declined by 10.6~17.1 percent with higher prices by 15.3~24.6 percent than normal climate years since 1990.

The result of a small electrostatic precipitator which is in order to decrease indoor air pollution for optimal efficiency was shown as follows. Although the closer distance between the discharge electrode and dust collecting electrode shows the better throughput efficiency by forming strong electrostatic Field, it does not have profound impact in case of optimal dust collecting area. G.P(gas passage) which is the distance from dust collecting electrode to dust collecting electrode is a crucial factor to decide dust collecting efficiency. The narrower distance of G.P shows the better throughput efficiency whereas it decreases when the distance is too narrow since sparks ensue by increasing the capacity of electrostatic charging system 5 mm regards as optimal efficiency in this experiment. Although the higher voltage shows the higher dust collecting efficiency overall, the experiment was not able to keep performing since the sparks which decrease dust collecting efficiency ensue over 40 kV. The efficient and safe voltage state is considered 3.6 kV in this experiment. The most crucial factor for dust collecting efficiency of an electrostatic precipitator which is in order to decrease indoor air pollution is applied voltage. In addition, optimal raw gas flow rate(2.4 m/sec) is more important factor than the excessive increase of dust collecting area.

The purpose of this article is analyzing the impacts of climate change on winter chinese cabbage yield in Korea, with employing a panel data regression model. Our results show that there is a negative impacts of high temperature and precipitation amount on winter chinese cabbage yields. Especially high temperature and rainfall in September cause serious damage to winter chinese cabbage yield. According to the reduction schedule on greenhouse gas emission(RCP 4.5 scenario.), winter chinese cabbage yield would be 7.7% lower than it is, for reasons of high temperature and rainfall damages by the end of 21st century.

A pilot-scale pulse-jet bagfilter was designed, built and tested for the effects of four operating conditions (filtration velocity, inlet dust concentration, pulse pressure, and pulse interval time) on the total system pressure drop, using coke dust from a steel mill factory. Two models were used to predict the total pressure drop according to the operating conditions. These model parameters were estimated from the 180 experimental data points. The empirical model (EM) with filtration velocity, areal density, inlet dust concentration, pulse interval time and pulse pressure shows the best correlation coefficient (R=0.971) between experimental data and model predictions. The empirical model was used as it showed higher correlation coefficient (R=0.971) compared to that of the Multivariate linear regression(MLR) (R=0.961). The minimum pulse pressure predicted by empirical model (EM) was 5kg/㎠.

The new empirical static model was constructed on the basis of dimension analysis to predict the pressure drop according to the operating conditions. The empirical static model consists of the initial pressure drop term (N dust = ω0υf / P pulse t) and the dust mass number term (Δp initial), and two parameters (dust deposit resistance and exponent of dust mass number) have been estimated from experimental data. The optimum injection distance was identified in the 64 experimental data at the fixed filtration velocity and pulse pressure. The dust deposit resistance (K d), one of the empirical static model parameters got the minimum value at , d=0.11m, at which the total pressure drop was minimized. The exponent of dust mass number was interpreted as the elasticity of pressure drop to the dust mass number. The elasticity of the unimodal behavior had also a maximum value at , d=0.11m, at which the pressure drop increased most rapidly with the dust mass number. Additionally, the correlation coefficient for the new empirical static model was 0.914.

The pressure drop through pulse air jet-type bag filter is one of the most important factors on the operating cost of bagfilter houses. In this study, the pilot-scale pulse air jet-type bag filter with about 6 ㎡ filtration area was designed and tested for investigating the effects of the four operating conditions on the total pressure drop, using the coke dust collected from a steel mill factory. When the face velocity is higher than 2 m/min, it is not applicable to on-spot due to the increase of power expenses resulting from a high-pressure drop, and thus, 1.5 m/min is considered to be reasonable. The regression analysis results show that the degree of effects of independent parameters is a order of face velocity > concentration > time > pressure. The results of SPSS answer tree analysis also reveal that the operation time affects the pressure drop greatly in case of 1 m/min of face velocity, while the inlet concentration affects the pressure drop in case of face velocity more than 1.5 m/min.