Recently, among the newly developed cities, there has been a development of new towns around existing chemical manufacturing plants. Accordingly, the aim was to understand the impact of factory noise on the residential areas of the newly developed city. To this end, noise from the factories was measured in accordance with the noise measurement methods recommended by the Ministry of Environment, in order to assess the reality of factory noise sources. Additionally, to understand the impact of factory noise on nearby residential areas, noise maps were created and the noise reduction effects were investigated. The purpose of this study is to establish appropriate low-noise measures to address noise complaints around factories.

Since the small screen must be watched at the production and manufacturing site, when using the monitor without a separate paper for work and production instructions, it is necessary to look at the work instruction screen installed in a separate space to prevent work efficiency from deteriorating. It plays a role through a monitoring system using DPS or Barcode and RF-ID recognition as a safety device for installing heterogeneous parts in manufacturing and missing parts, but due to the high cost of introducing the system and difficulty in maintaining management, Visual POP is put into the production line. This study was produced by paying attention to the following five points in order to reduce the weight of these industrial Visual POPs and have global specifications and uses. These include instrument design and design, processing production, UI and control, application, thermal stress analysis and thermal analysis. In this study, it is considered to expansions of applications of Visual POP for two models.

This study is shown the result of the first year to develop an export 1050MPa-class lightweight ductile iron castings Austempered control arm through the research process to obtain the following results. First, the structure of the optimal design Layout design and development of the component, and then achieve them through the Control Arm rigidity and optimal structure design and robust design of the focus areas of the expected stress Control Arm. Second, to develop a Control Arm reflects the high rigidity and high performance lightweight structures. Control Arm them developed to meet the design and rigidity as required by the consumer through the hollow, and to develop a process for the Core. Third, through optimum alloy composition and heat treatment methods will be derived to derive the amount of iron alloy (Cu, Ni, Mo) and Austempered heat treated and tempered condition. Fourth, through the development of optimum molding technology development component to develop the optimum ADI for the low-stiffness, high-rigidity component development, it attempts to develop a high-strength casting forming technology.

Ulsan Airport cannot operate precision instrument approach procedures from the south direction (Runway 18) due to obstacles. Even non-precision instrument approach procedures have higher approach angles and minimum descent altitudes (MDA) compared to other airports, which can pose safety risks for pilots following the flight procedures. Recently, since the introduction of SBAS-based satellite navigation flight procedures in Korea, Ulsan Airport is expected to experience improvements, including reduced offsets and lower minimum descent altitudes in its existing flight procedures. During the design process of new flight procedure routes, a comprehensive analysis of noise differences from existing routes and the noise impact on new areas is necessary. Therefore, this study aims to present the changes in aircraft noise resulting from the implementation of new flight procedures using the Aviation Environmental Design Tool (AEDT)

Noise is defined as ‘unwanted sound’ or ‘undesired sound’. Recently, the aviation industry has been rapidly developing through convergence with cutting-edge technologies such as UAM. Accordingly, it is expected that new aviation industry models will continue to be created in Korea. In addition, it is expected that aircraft noise will be raised as a new social problem. The characteristic of aircraft noise is that it has a wide transmission range. Therefore, the area affected by aircraft noise is extensive, and the damage area varies depending on the flight path and flight environment. Additionally, it tends to occur continuously in certain areas. This study is an extension of the previous studies 􋺷Study on noise measurement and analysis of C172 aircraft at Muan Airport􋺸 and 􋺷Study on noise measurement and analysis of SR20􋺸, and investigated the noise characteristics of various piston engine trainer aircraft operated in Korea. We want to measure and analyze noise.

The main problem of airport noise is the impact of aircraft noise on the residents around the airport. In order to investigate the noise situation of a certain airport in South Korea, this article selects Muan Airport as the research project, selects five measurement points near the airport, takes aircraft takeoff as an example, measures the maximum noise level of each measurement point during each take off, and uses the American Airport Noise Prediction Software (AEDT 3C) to predict the noise of a single aircraft during take off, Calculate the contour area and sound exposure level data for four aircraft models. The results indicate that the average maximum noise level error between the measurement results and the simulation results is within 2dB, and the maximum noise level ranges from 65.1 to 88.1 decibels with the measurement range.

The airport is chosen as the measurement airport in this paper to investigate the noise characteristics of piston engine aircraft used for training at Muan airport. Five measurement points near the runway are chosen. The maximum noise values of piston engine aircraft (C172) and SR20 take-off processes are measured. The results show that the average maximum noise values of the five measuring points range from 66.5 dB(A) to 76.7 dB(A), with point C having the greatest noise influence. During take-off, the maximum noise of an SR20 aircraft occurs near 500Hz of low frequency.

Aircraft noise is something humans don't want. In this study, based on the Rotax 914 engine used in Korea, the propeller blade angle was changed by 1 degree and the engine RPM was changed to review the three-wing “G Company” propeller and the three-wing GSC wooden propeller. Select the best propeller pitch angle by measuring the change in propeller noise and thrust and the change in engine RPM due to the change in noise and thrust. We would like to present a propeller pitch angle suitable for the location of the airfield and the operation of the aircraft. Based on this, we would like to help resolve noise complaints around the airfiled.

Noise is a sound that people don't want. In this study, noise is measured for SR20, a general aviation trainer used in Korea. In addition, noise measurement points are selected at Muan Airport, where most of the domestic trainers fly under the supervision of the Ministry of Land, Infrastructure and Transport, and the measured data are analyzed based on this. We also want to analyze the noise characteristics of SR20 aircraft through frequency analysis of the noise characteristics of SR20 aircraft are unique. We want to use this to understand what type of noise the trainer affects in future studies. this study will improve the reliability of the noise prediction scenario by comparing and analyzing the actual measured and predicted values when using the noise prediction program.

Metal material production process machinery is becoming larger due to the development of industry. Since there are many overseas manufacturers of large machines used in industrial fields, there are limitations in investigating the manufacturer's noise prediction method and measurement method. A noise map was prepared to obtain information necessary for noise reduction and to effectively manage noise companies. It was modeled with the drawings provided to prepare the noise map and the results of the actual measurement of the site. In order to improve the noise environment of workers, there was a noise reduction effect when a soundproof wall was installed between the noise source and the worker's workplace.

Most domestic pilots are trained at local airfields using propeller aircraft. Training aircraft are mainly trained in the airspace around the aerodrome, and mainly take-off and landing exercises that require a lot of practice among flight control skills. Aircraft noise is a sound that humans do not want. In this study, based on the Rotax 914 engine used in Korea, the propeller blade angle was changed by 1 degree for the 3-leaf “K company” propeller and the 3-leaf GSC wooden propeller, and the engine RPM was changed to examine the noise and thrust changes. The purpose of this study is to check whether noise and thrust loss are the least at the engine's maximum RPM, and to propose an aircraft operation plan in the noisy aerodrome area based on the values.

Noise is a sound that humans do not want. In this study, noise is measured for C172, the most frequently used general aviation trainer in Korea and abroad. In addition, in this study, noise measurement points are selected for Muan Airport, where most of the domestic training aircraft fly under the supervision of the Ministry of Land, Infrastructure and Transport. Based on this, the measured data is scaled and analyzed. In addition, we intend to analyze what characteristics C172 aircraft have unique through frequency analysis of noise of C172. Through this, it is intended to understand what type of noise training aircraft affect in future studies.

Noise is a sound that humans do not want. In this study, Based on the Rotax 912 engine, which is most commonly used in Korea, we will look at noise and thrust changes by changing the propeller blade angle by 1 degree for the two-blade Sensenich Propeller and the three-blade Wrap drive Propeller. Through this, we want to check which part of the propeller angle produces the least noise and the least thrust loss for each propeller, and propose a propeller operation plan in a noisy area based on the value.

This study indirectly measures the vibration value corresponding to the abnormal vibration generated by the small engine for light aircraft to which the dual carburetor is applied by the pressure difference from each carburetor. It relates to a system for outputting a warning to a pilot, comprising two pressure gauges for measuring the pressure from each carburetor and a warning signal output unit for outputting a warning signal corresponding to the pressure difference measured by the two pressure gauges do.

Noise is unwanted sound and nerve jarring sound or mentally and physically harmful sound to the human body. In the 20th century, the aviation industry have been comprehensive industry of all areas and humanity have been globalized, the number of aircraft operated have been increased continuously. We confirmed that the actual measured noise data was consistent with the aircraft average noise data to calculate noise maps of INM version 7.0. and based on this, the actual flight scenarios and the noise map were created. For making the noise map, we assumed that the maximum number of flight is operated.

본 연구는 3년생 ‘Fuji Mishima’/M.9의 주간에서 직접 발생한 3년생 주지를 강하게 하수유인한 후 상처를 받았을 것으로 예상되는 만곡부위를 채취하여 하수유인 1, 3, 5, 15일 후의 모습을 관찰하였다. 하수유인 1일 후에는 각 조직이 아직 상처받지 않고 잘 발달된 모습이 관찰되었다. 하지만 3일 후 검경한 결과에서는 하수유인 처리된 하부에서 체관부와 물관부가 다소 눌림 현상이 관찰되었다. 유인 후 5일 후에 검경한 결과, 가지의 상부와 하부 모두에서 체관이 일정한 위치에서 이탈된 모습이 관찰되었다. 유인 15일 후에 하수유인 된 가지의 하부 조직에서 수피조직(주피)까지 파괴된 모습이 관찰되었으며, 체관부의 피해도 특히 심하였고, 이 부위에 새로 형성된 조직이 있는 것이 발견되었다. 유인하지 않은 나무에 대하여 에틸렌 발생량을 측정하였으나 에틸렌은 검출되지 않았고 유인한 가지에서는 처리 3일 후에 에틸렌 발생이 증가하였고 6일 후에는 절반으로 감소하였다.

The aim of this study was to analyze differences in the perception of Gangwon-do residents using a satisfaction survey. The residents were found to be most satisfied with sectors such as parks/green spaces, landscape, and public order; however, they were least satisfied with transportation, culture, sports, medical services, and welfare facilities. Additionally, among all the items in the satisfaction survey, job satisfaction was the lowest. When comparing satisfaction trends observed in the city to those of the county, the overall satisfaction of the county was found to be slightly higher. This result could be attributed to young people being underrepresented in this survey in conjunction with the greater policy-level support for middle-aged people by from the government and Gangwon-do. Therefore, it would be worthwhile to create policies that primarily support young people and to also to create high-quality jobs with stable pay and employment prospects. This could minimize the outflow of youth and even encourage their inflow to similar small provincial cities. In Southern region and Seorak region of Gangwon-do, the satisfaction with gap between house price and region was low, which might be related to the increased demand for real estate throughout this area.

This research was conducted to propose the basic direction of a smart city plan for the satisfaction of residents of Gangwon-do . Initially, the awareness of smart cities among the residents of Gangwon-do was as follows: The response “I have no idea” was 21.7% higher and “I do not know the details, but have heard of it” was 15.1% lower than the awareness among residents across the nation. Based on these results, it was confirmed that awareness was very low despite the government’s smartification reinforcement policy. In addition, the residents of Gangwon-do expected that their time would be saved and their living convenience would increase but were worried that their privacy would be invaded and that the conflict between generations would intensify. Thus, it is necessary to develop a plan to enhance the awareness of smart cities, as well as a plan to enhance digital awareness. Second, based on the importance of and satisfaction with the urban problem response system examined among the residents of Gangwon-do, it seems necessary to prioritize improvements in public space control and administrative problem responses involving deteriorated parks/plazas, pedestrian environment, and administrative processing inefficiency and fairness. Additionally, the first prioritization priority of the residents of Gangwon-do was “health/welfare/medical service” (27.7%); the second and third highest priorities were “transportation service” (26.3%) and “environmental service” (19.0%), respectively. In particular, as “transportation service” was highly preferred in the Chuncheon and Wonju regions and “health/welfare/medical service” was highly preferred in the Gangneung, Sokcho, and other southern regions, it was confirmed that the level of urbanization is deeply associated with smart services.