검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 196

        1.
        2024.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The alternative food market has attracted much attention due to concerns about climate change, increasing consumer awareness of value consumption, and the development of the Food-Tech industry. This study aimed to analyze the factors that drive consumers to purchase alternative food products and identify the mechanisms that can induce consumers to continue buying. We surveyed 1,200 consumers and estimated data using a logit model. The results showed that the presence of vegetarians in the household, environmental concerns, a vegetable-oriented diet, and a mixed diet of meat and vegetables were positively associated with purchasing plant-based alternatives. Of particular interest was the non-linear relationship between respondents’ age and their purchasing experience with plant-based options, with the likelihood of purchasing alternatives increasing with age from the mid-50s onward. These findings suggest that in addition to the growing number of consumers who share the environmental value, which leads to increased interest in and purchase of plant-based alternatives, alternative foods are also health-oriented and meet the needs of older consumers, who are becoming an increasingly important segment of the super-aged society, suggesting the potential for continued growth in the alternative food market.
        4,000원
        2.
        2024.06 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Because most spent nuclear fuel storage casks have been designed for low burnup fuel, a safety-significant high burnup dry storage cask must be developed for nuclear facilities in Korea to store the increasing high burnup and damaged fuels. More than 20% of fuels generated by PWRs comprise high burnup fuels. This study conducted a structural safety evaluation of the preliminary designs for a high burnup storage cask with 21 spent nuclear fuels and evaluated feasible loading conditions under normal, off-normal, and accident conditions. Two types of metal and concrete storage casks were used in the evaluation. Structural integrity was assessed by comparing load combinations and stress intensity limits under each condition. Evaluation results showed that the storage cask had secured structural integrity as it satisfied the stress intensity limit under normal, off-normal, and accident conditions. These results can be used as baseline data for the detailed design of high burnup storage casks.
        4,000원
        6.
        2024.04 구독 인증기관·개인회원 무료
        갈색거저리 유충의 사료인 밀기울은 대부분 수입에 의존하고 있는데 일부 국가의 식량 수출 중단 조치 등에 따른 국제 곡물가격 상승으로 밀기울 가격은 인상되고, 식용곤충 판매가격이 하락하면서 생산비 절감을 위한 사료 개발이 요구되고 있다. 농업부산물 3종을 50% 이상 급이하게 되면 유충 생육이 저하되었기 때문에 본 연구는 적정한 배합비율을 선정하기 위해 첨가사료 20, 30% 함량으로 밀기울과 혼합하여 사료를 급이하였을 때 갈색거 저리 유충의 생육 특성과 영양성분 변화에 대해 밀기울만 제공한 대조구와 비교하였다. 부산물 A와 B, C를 각각 30% 함유한 처리구에서 갈색거저리 유충 무게는 대조구와 차이가 없음을 확인하였다. 먹이소화율은 부산물B를 20% 함유한 처리구가 80.5%로 대조구에 비해 높았고, 부산물C 30% 처리구에서 72.6%로 가장 낮았다. 갈색거저 리 유충의 생육일수 100일 기준으로 부산물B 30% 처리구에서 용화율이 76.1%로 대조구보다 1.6배 높았으며, 부산물A 20% 처리구는 29.2%로 용화율이 가장 낮았다. 갈색거저리 유충의 조단백질 함량은 부산물 C 30% 처리 구에서 대조구보다 10.3% 증가하여 아미노산 분석을 진행한 결과 sarcosine과 ornithine이 2.5배 이상 증가하였다. 이를 통해 부산물 B나 C를 30% 함유한 사료를 급이하였을 때 사육 원가를 절감하여 유충을 생산할 수 있을 것으로 사료된다.
        7.
        2024.04 구독 인증기관·개인회원 무료
        동물의 종 유지에 있어서 교미행동은 매우 중요한 위치를 차지함. 교미과정에서 수컷의 경우 모든 암컷에 대해 성행동을 보이는반면, 암컷은 가장 적절한 교미의 시기를 정하며, 적절한 수컷을 선택하고 교미행동을 보이기 때문에 암컷의 교미행동을 유도하는 과정은 생물학에서 매우 중요한 의미를 지님. 본 연구에서는 초파리 (Drosophila melanogaster) 전자현미경자료와 총신경망분석 (Connectomics)을 이용하여 초파리 뇌에서 암컷의 교미행동을 조절하는 것으로 알려진 pC1신경의 하부신경 pC1b,c가 성적 성숙과정에서 교미를 하고자 하는 욕구 (sexual drive)를 증가시키는 기능을 하는 것을 처음으로 밝힘. 본 연구에서는 처음으로 pC1b,c 신경 내의 cAMP 수준이 교미의 욕구변화를 보여주는 중요한 물질이라는 것을 밝혔고 cAMP의 수준이 오르기 위해서는 신경펩티 드인 Dh44와 그 수용체 GPCR인 Dh44R1과 Dh44R2가 필요하다는 것을 확인함. 또한 cAMP의 변화는 신경내의 CREBB를 통하여 하위 유전자인 pyx (pyrexia)의 발현을 유도한다는 것을 밝힘. 본 연구로 종 유지 메커니즘을 좀 더 이해할 수 있음.
        11.
        2023.11 구독 인증기관·개인회원 무료
        Korea Atomic Energy Research Institute (KAERI) has been operating the Post Irradiation Examination Facility (PIEF) for fuel examinations. The facility has pools and hot cells for handling and examining fuel assemblies and rods. Among the hot cells, the second cell is for measuring rod internal pressure (RIP) and then cutting the rod to make samples for destructive tests. Currently, the cutting machine is broken, so it has to be replaced. Because the existing cutting machine consists of many parts and its size was quite a bit large to handle and treat for the radioactive waste disposal, the disassembly work has been performed to make it smaller using manipulators. The drawings of the cutting machine were reviewed and the disassembly tools were developed considering workability when the work performed at the hot cell using the manipulators. The large parts such as motor, mirror and cable, etc., were able to be disassembled and the machine size became so smaller that it could be easily handled for the disposal.
        12.
        2023.11 구독 인증기관·개인회원 무료
        Korea Atomic Energy Research Institute (KAERI) has been operating the Post Irradiation Examination Facility (PIEF). The facility has many PIE equipment and one of them is a hydrogen analyzer for measuring hydrogen contents in Zr cladding of spent fuel. The cladding tube of fuel is oxidized in the core environment of high temperature and pressure and absorbs some of the hydrogen generated during the oxidation. The hydrogen content increases with the increase of burn-up, and causes hydriding of the material, which degrades the mechanical properties. Therefore, hydrogen content analysis of the cladding tube is required for the performance and integrity evaluation of spent fuel. In PIEF, the hydrogen analyzer extracts hydrogen gas from Zr cladding by the hot extraction method. The hydrogen gas flows with inert gas and oxidizes to H2O through a CuO reagent. Finally, an IR detector measures the hydrogen amount from the absorbed IR intensity at a specific wavelength. Because the equipment is in the glove box and has some consumable parts, the maintenance work was performed as a radiation work.
        13.
        2023.10 구독 인증기관·개인회원 무료
        본 연구는 주변 환경의 차이에 따른 화분매개곤충의 유입 특성을 파악하기 위하여 국립수목원 내 진화속을걷 는정원과 부추속전문전시원에 식재된 울릉산마늘의 화분매개곤충을 조사하였다. 2023년 5월 22일부터 6월 2일 까지 꽃이 70% 이상 개화하였을 때 포충망을 활용하여 8일간 곤충을 채집하였고, 각 전시원 별 식생(피도), 기후 (온도·습도·조도)를 조사하였다. 조사 결과 진화속을걷는정원에서 피도 60% 온도 26.4℃, 습도 31.5%, 조도 40953.6lx, 화분매개곤충 20과 450개체, 부추속전문전시원은 피도 90%, 온도 25.6℃, 습도 31.6%, 조도 6387lx, 화분매개곤충 15과 196개체로 나타났다. 온도와 조도가 상대적으로 높은 진화속을걷는정원이 채집된 곤충의 다양성과 방문 빈도가 높았다. 시간대별 곤충의 방문 빈도를 비교해본 결과 온도와 조도는 개체수가 증가할 때 같이 증가하는 경향을 보였으며, 습도는 반대의 경향을 보였다.
        14.
        2023.10 구독 인증기관·개인회원 무료
        Golden apple snails(GAS) are native to warm regions such as Central and South America and Southeast Asia, and were first introduced as a high-protein food. GAS are omnivorous and have a habit of eating plants submerged in water, so they have been used for eco-friendly weed control in rice fields since 1992. When the GAS was first introduced, it was thought that it would be impossible to overwinter in Korea. However after 2000, overwintering individuals were founded and damage to rice occurred and the development of means to control GAS has been required. In this study, we tested the effectiveness of an eco-friendly pest control agent using Styrax japonicus that grow naturally in Korea. As a result of exposing GAS to S. japonicus fruit powder, a 100% molluscicidal effect was confirmed at 66.7ppm. To investigate the duration of effect, treatment was performed at the same concentration and molluscicidal effect of more than 90% was up to 3 days after treatment. The killing effect of each part of the S. japonicus was compared, and the seed extracts showed no killing effect at all concentrations, while the sarcocarp extracts showed a 100% killing effect up to 33.3ppm, and the fruit extracts showed a 100% killing effect up to 200ppm.
        15.
        2023.05 구독 인증기관·개인회원 무료
        Natural uranium-contaminated soil in Korea Atomic Energy Research Institute (KAERI) was generated by decommissioning of the natural uranium conversion facility in 2010. Some of the contaminated soil was expected to be clearance level, however the disposal cost burden is increasing because it is not classified in advance. In this study, pre-classification method is presented according to the ratio of naturally occurring radioactive material (NORM) and contaminated uranium in the soil. To verify the validity of the method, the verification of the uranium radioactivity concentration estimation method through γ-ray analysis results corrected by self-absorption using MCNP6.2, and the validity of the pre-classification method according to the net peak area ratio were evaluated. Estimating concentration for 238U and 235U with γ-ray analysis using HPGe (GC3018) and MCNP6.2 was verified by 􀟙-spectrometry. The analysis results of different methods were within the deviation range. Clearance screening factors (CSFs) were derived through MCNP6.2, and net peak area ratio were calculated at 295.21 keV, 351.92 keV(214Pb), 609.31 keV, 1120.28 keV, 1764.49 keV(214Bi) of to the 92.59 keV. CSFs for contaminated soil and natural soil were compared with U/Pb ratio. CSFs and radioactivity concentrations were measured, and the deviation from the 60 minute measurement results was compared in natural soil. Pre-classification is possible using by CSFs measured for more than 5 minutes to the average concentration of 214Pb or 214Bi in contaminated soil. In this study, the pre-classification method of clearance determination in contaminated soil was evaluated, and it was relatively accurate in a shorter measurement time than the method using the concentrations. This method is expected to be used as a simple pre-classification method through additional research.
        16.
        2023.05 구독 인증기관·개인회원 무료
        IAEA safety standards document and international programs (such as BIOMASS) related to the assessment of the biosphere around High Level Radioactive Waste (including Spent Nuclear Fuel) repositories require the assessment of the biosphere to use the assumption that the current natural environment and human society will be maintained, and at the same time, the evolution of the distant future changes also need to be taken into account. In Korea, which has not designated candidate disposal sites, it is necessary to investigate and predict the current state and future changes of the natural environment throughout Korea and apply it practically to Biosphere assessment (for BDCF derivation) for candidate disposal sites suitability assessment and Safety Case (for performance assessment) preparation for design, construction, operation, and post-closure management. To this end, the natural environment in the fields of Topography, Geology, Soil, Ecology, Weather and Climate, Animals and Plants, Hydrology, Ocean, Land-use, etc. and human society in the fields of Population Distribution, Spatial-Planning, Urban Form, Industrial-Structure, Lifestyle etc. are being investigated in the context of current status, past change records, and future change potential in the Korean Peninsula. This paper summarizes those investigations to date. This study referred Biomass-6 [IAEA] and National Atlas I (2019)/II (2020)/III (2021) [National Geographic Information Institute of the Korea Ministry of Land, Infrastructure and Transport].
        17.
        2023.05 구독 인증기관·개인회원 무료
        Korea Atomic Energy Research Institute (KAERI) has been operating the Post Irradiation Examination Facility (PIEF) for spent fuel. The facility has pools and hot cells for handling and examining fuel assemblies and rods. In the first hot cell, non-destructive tests such as visual inspection, defect detection, oxide layer thickness measurement, and gamma scanning are performed on a full-length fuel rod. Then, the fuel rod is transported to the next hot cell for measuring the rod internal pressure (RIP). After the RIP measurement, the fuel rod is cut by a cutting machine to make samples for destructive tests. Currently, the existing cutting machine is broken, so a new machine needed to be designed and manufactured. The major considerations for designing the cutting machine were convenience of remote handling and decontamination. The machine was modularized and its handling parts were designed to be easily controlled by manipulators. The cover was designed to prevent radioactive contamination of the surrounding area.
        18.
        2023.05 구독 인증기관·개인회원 무료
        In this study, radioactivity of Cs-134, Cs-137, and Eu-154, which are gamma-emitting nuclides among fission products of spent fuel, was analyzed as a tool to measure the burnup of spent fuel nondestructively. This nuclide has a unique gamma-ray energy, allowing the amount of the isotope to be estimated based on the intensity of the gamma-ray at a specific energy. The SCALE 6.2 ORIGAMI (ORIGen AsseMbly Isotopics) module and the latest ORIGEN-arp library were used for computational analysis. The spent fuel samples were selected as WH14×14 with an enrichment of 1.5~5.0wt%, a burnup of 10~60 GWD/MTU, and a cooling time of 0~40 years. The analysis results were benchmarked using SFCOMPO experimental data provided by OECD/ NEA, including isotope inventory and uncertainty measured by destructive radiochemical analysis, fuel assembly design data required for benchmark model development, reactor design information, and operating history information. 16 similar spent fuels were selected from SFCOMPO data and the calculation results of Cs-134, Cs-137, and Eu-154 were compared. The average error of the Cs-134 radioactivity calculation result was 2.81%, and the maximum error was 6.70%. The average errors of Cs-137 and Eu-154 were 2.42% and 4.95%, respectively, and the maximum errors were 5.40% and 14.91%, respectively.
        19.
        2023.05 구독 인증기관·개인회원 무료
        In case of damaged spent fuels, it would require additional treatment for their transportation and storage to capture the radioactive fission products in a defined space. The canning container for the damaged spent fuels is one way to seal the radioactive fission products inside the container. In the Post Irradiation Examination Facility (PIEF) of KAERI, the Quiver container has been introduced for canning damaged spent fuels from Westinghouse Sweden. The main container body has been manufactured for particle-tightness of spent fuel. In addition, drying equipment is being prepared for gas-tightness of spent fuel. The drying equipment can remove water and fill the inert gas inside the container. Before drying inside the container, we evaluated the volatile fission products inventory because volatile fission products could be released during the drying process. Despite assuming highly conservative hypotheses for the inventory remaining in damaged fuel rods, the amount that could be released during the drying process was less and dose rate levels around the evacuation piping system were low.
        20.
        2023.05 구독 인증기관·개인회원 무료
        CANDU Spent Fuel (CSF) dry storage system, SILO, has been operated from 1992 at Wolsung under 50 year operating license. As of 2023, this system has been operated for over 30 years and its licensed remaining operation time is less than 20 years. When it faces the final stage of operation, it has only two options; moving to a centralized away-from-reactor storage or extending its license atreactor. These two options have an inevitable common duty of confirming the CSF integrity by a “demonstration test”. Since the degradation of CSF and structural materials in the SILO are critically dependent on temperature, two important goals of the ‘DEMO test’ were set as follows. 1. Design of ‘DEMO SILO’: Development of internal monitoring technology by transforming SILO design. 2. Accurate measurement and evaluation of the three-dimensional temperature distribution in the ‘DEMO SILO’ Based on operating real commercial SILO dimension, a conceptual “DEMO SILO” design has been developed from 2022. Because, unlike with commercial Silo, ‘Demo Silo’ must be disassembled and assembled, and have penetration holes. Safety evaluation technologies like structural, thermal and radiation protection analysis also have been developed with design work. ‘Demo SILO’ should evaluate an accurate 3D temperature distribution with minimal number of thermocouples and penetration holes to avoid disruption of internal flow and temperature distribution. For this reason, a ‘Best Estimate Thermal-Hydraulics evaluation system for SILO’ is under development and it will be essential for ensuring temperature prediction accuracy. Construction of a full-scale test apparatus to validate this technology will begin in 2024. In order to supply power to many heaters and monitor temperature gradient inside of this apparatus, it has modular design concept by dividing its whole body to axial 9 sub-bodies which looks like a donut containing a basket at center position.
        1 2 3 4 5