고자리꽃파리는 양파 및 마늘 등 백합과 Allium 속에 속하는 농작물에 중요한 해충으로 전 세계적으로 온대지역에 서 경제적 해충으로 취급하고 있다. 본 연구에서는 기존 자료를 바탕으로 월동번데기의 성충으로 우화모델를 작성하 고 포장 실측자료와 비교하여 평가하였다. 월동번데기 발육모형으로 선형과 비선형모형을 작성하고 발육기간 분포 모형과 결합하여 예찰모형을 작성하였다. 비선형발육모형 작성시 3-매개변수 락틴모형 적용뿐만 아니라 4-매개변 수 모형의 마지막 변수 값을 선형모형의 절편값으로 대체하여 저온에서 선형성이 강화도록 변형시켰다. 성충우화 50% 예측에서 일일평균온도를 이용하는 경우 적산온도 모형을 비롯하여 발육률 적산모형(선형식 및 비선형식) 모두 실측치와 큰 차이가 있었다. 시간별온도를 입력값으로 한 경우 3-매개변수 모형을 제외한 사인곡선 적산온도 모형, 선형 발육률 적산모형, 4-매개변수 비선형 발육률 적산모형의 평균편차는 3일과 차이가 없었다. 최종적으로 선형모형 및 4-매개변수 비선형모형을 바탕으로 시간별온도자료를 이용한 발육률 적산모형은 선발하였다. 그 결과 선형 발육률 적산모형이 두 포장적합 집단(1984, 1987)에서 실측일과 편차가 3일과 차이가 없었다. 비선형 발육률 적산모형은 1984년 적합은 0.8일 편차로 정확하였으나 1987년 집단에서 평균편차가 6.5일로 다소 증가하였다.

CANDU Spent Fuel (CSF) dry storage system, SILO, has been operated from 1992 at Wolsung under 50 year operating license. As of 2023, this system has been operated for over 30 years and its licensed remaining operation time is less than 20 years. When it faces the final stage of operation, it has only two options; moving to a centralized away-from-reactor storage or extending its license atreactor. These two options have an inevitable common duty of confirming the CSF integrity by a “demonstration test”. Since the degradation of CSF and structural materials in the SILO are critically dependent on temperature, two important goals of the ‘DEMO test’ were set as follows. 1. Design of ‘DEMO SILO’: Development of internal monitoring technology by transforming SILO design. 2. Accurate measurement and evaluation of the three-dimensional temperature distribution in the ‘DEMO SILO’ Based on operating real commercial SILO dimension, a conceptual “DEMO SILO” design has been developed from 2022. Because, unlike with commercial Silo, ‘Demo Silo’ must be disassembled and assembled, and have penetration holes. Safety evaluation technologies like structural, thermal and radiation protection analysis also have been developed with design work. ‘Demo SILO’ should evaluate an accurate 3D temperature distribution with minimal number of thermocouples and penetration holes to avoid disruption of internal flow and temperature distribution. For this reason, a ‘Best Estimate Thermal-Hydraulics evaluation system for SILO’ is under development and it will be essential for ensuring temperature prediction accuracy. Construction of a full-scale test apparatus to validate this technology will begin in 2024. In order to supply power to many heaters and monitor temperature gradient inside of this apparatus, it has modular design concept by dividing its whole body to axial 9 sub-bodies which looks like a donut containing a basket at center position.

Control mating is important aspect in bee breeding programs. The technique of artificial insemination is the possible one that can surely control mating of the selected drones with the virgin queen. This is the first time applied artificial insemination technique to control mating of A. cerana in Korea. Altogether 18 queens were artificially inseminated, and 2,000 drones of Korean A. cerana were used to evaluate amount of semen collection. Semen of A. cerana is much difficult to separate from mucus in comparing with A. mellifera. The average amount of semen can be collected from one A. cerana drone was 0.09 μl, whereas the A. mellifera was more than 6 times (0.58 μl semen per A mellifera drone). Obtaining 1 μl of semen have to collect from 11.94 drones that successful semen ejection and have to kill 17 A. cerana drones. Queens artificially inseminated with 4 μl of semen (once insemination) or 8 μl of semen (twice insemination, each with 4 μl of semen) started laying egg later than naturally mated queens 5.3 and 2.5 days, respectively. The onsets of oviposition of artificially inseminated queens were 12.5 to 15.3 days. Queens received twice inseminations started laying eggs 2.8 days earlier than those received only once insemination. Artificially inseminated queens produced exclusively brood and were similar as the naturally mated ones. The brood production of the queens received once insemination with 4 μl of semen was insignificantly different than those received twice inseminations or naturally mated ones, suggesting that one artificial insemination with 4 μl of semen is favorable.

The objectives of this study were to evaluate the antimicrobial effects of ε-poly-L-lysine mixture (EPM) on cheon-ggukjang and to determine the optimal mixing ratio in cheonggukjang. Increasing the EPM up to 2% decreased via-ble cell counts at both 15oC and 30oC storage. The pH of cheonggukjang without EPM increased slowly over thestorage periods, but cheonggukjang with EPM showed a slight increasing tendency, with the highest pH at 2% EPM.The sensory scores, such as texture and flavor, were highest in samples containing 2% EPM; however, overall pref-erence was not significantly different when compared to the control. For the optimum cheonggukjang processingconditions, 13 experimental points were selected. Soybean and EPM were chosen as independent variables. Viablecell count, pH, texture, and overall preference were measured. The optimum formulation of cheonggukjang usingthe numerical analysis was found to be 98.52% soybean and 1.48% EPM, resulting in a 0.722 desirability value.

Lepidopteran pests monitoring in adult stage was generally performed using delta or corn typed trap including rubber septa impregnated sex pheromone (lure). Sometimes, unfortunately trapped samples were severly damaged because of biotic and/or abiotic environments such as micro-organism, predator and rain, sticky material, respectively. In our case, we monitored potato tuber moth, PTM, Phthorimaea operculella distribution during 2009~2012 in Korea. However, we encountered unexpected problem, another species can be trapped in species specific sex pheromone trap. Therefore, species confirmation was needed in trapped samples. Here we developed confirmation method by direct PCR (without DNA extraction) or sequencing methods which trapped samples that cannot identified by morphologically. We designed multi-plex PCR universal primers and species specific primers in rRNA region because to check the success of PCR and species identification. This direct PCR method can be applied in other species confirmation which monitored using pheromone trap.

The green peach aphid, Myzus persicae (Sulzer), is one of the most serious pests in cabbage cultivation. Field survey was carried out to know the insecticide resistance levels and to develop the applicable insecticide resistant markers in five main cabbage cultivation regions (Pyeong-chang, Hong-cheon, Bong-wha, Mu-ju and Je-ju) during 2009 to 2011. M. persicae can resist a wide range of insecticides in five surveyed local populations. Therefore multi resistant (MR) strain was selected from these five local populations and esterase over-expression, modified AChE (MACE) and mutation(s) in para-type sodium channel were analyzed using native IEF and quantitative sequencing with five local populations. Esterase over-expression and MACE (StoF mutation) were observed in all populations including MR strain. LtoF mutation is well known as a kdr mutation in para-type sodium channel. However, even though LC50 values of MR strain noted over 2,000 times higher than that of susceptible strain against bifenthrin, LtoF mutation was not detected in para type sodium channel and also local populations. We found another mutation (MtoL) in para and that mutation highly correlated between mutation ratio and bioassay data. For preliminary resistance monitoring, we developed quantitative sequencing (QS) to detect the frequencies of point mutation as a population genotyping. These methods can apply to manage M. persicae resistant populations in field.

본 시험은 우리나라에서 발생하는 푸른곰팡이병균의 종의 빈도와 발병환경 및 방제법을 구명코져 실시하였다. 시험결과 Trichoderma koningi, T. lignorum, T. glaucum과 미동정의 1종등 4종의 병원균이 분리되었고 이들의 빈도는 각각 와 이었다. 푸른곰팡이병균은 감자배양액, 왁스만배양액과 리차드배양액에서 생육이 잘 되었으며 중성-염기성배지에서는 생육이 불량한 반면 산성에서 생육이 왕성하였으며 최적산도는 pH4였다. 양송이 수확기간 중 재배사내의 온도는 내외 일 때 본명의 발생이 적었고 수량이 많으며 이상에서는 본병의 발생이 격심하였다. 푸른곰팡이병균은 복토흙 소독시 에서 60분, 혹은 에서 30분간 열처리하므로서 완전히 사멸하였고 퇴비 후발효 과정에서도 사멸되었다.

본 연구는 하상재료의 종류와 유속에 따른 세굴변화에 대한 연구를 진행하였고, 유속, 구성방법 및 재료와 세굴에 대한 상관관계를 정의하여 호안 및 제방의 운용성을 검토하고자 실험을 통한 연구를 진행하였다. 본 연구의 실험에 사용된 재료는 제방에 사용되고 있는 재료로 모래, 황토를 이용 하였다. 실험실규모 고속수로에서 다양한 계측장비들을 이용하여 유속의 변화에 따른 재료의 세굴을 측정하였다. 이를 통해 세굴 전·후의 재료변 화를 수치적으로 분석하였다. 고유속흐름에서 하상재료에 따라 세굴의 정도를 비교·평가하여 안정성에 대한 연구도 진행하였다. 실험 결과 모래의 경우 응집력이 매우 약하여 1.0 m/s 이하에서도 40% 이상의 재료가 유실이 되고 황토의 경우 모래보다 유속이 빠른 2 m/s 이상에서도 6% 이하 의 재료가 유실이 되었다. 재료가 유실된 이유중 하나는 강한 응집력으로 건조균열이 발생하여 세굴에 취약한 결과를 보였다. 본 연구에서는 이러한 건조균열의 발생부터 재료가 유실되는 현상을 제거하는 방법부터 재료에 대한 구성과 유실정도를 평가 하였다.

Compared to wide ranges of genetic variation of natural populations, very limited Miscanthus cultivar has been released. This study was the first report on the development of Miscanthus cultivar by means of radiation breeding. Seeds of M. sinensis were initially exposed to gamma rays of 250 Gy for 24 h, generated from a 60Co gamma-irradiator. The irradiated seeds were sown and then the highly tiller-producing mutants were selected for this study. Biomass-related parameters including tiller number, plant height, stem diameter, and leaf number were measured. Ploidy level and internal transcribed spacer (ITS) were investigated to characterize the mutants compared to wild type (WT) Miscanthus. Plant height and tiller number were negatively related, where multi-tillering mutants were relatively short after 4 month growth. However stem diameter and leaf number were greater in mutants. All the materials used in this study were diploid, implying that the mutants with greater tiller numbers and stem diameter were not likely related to polyploidization. Based on the sequence of ITS regions, the mutants demonstrated base changes from the gamma irradiation where G+C content (%) was decreased in the ITS1, but increased in ITS2 when compared to WT sequence. ITS2 region was more variable than in ITS1 in the mutants, which collectively allows identification of the mutants from WT. Those mutants having enhanced tillers and allelic variations might be used as breeding materials for enhanced biomass-producing Miscanthus cultivars.