The clearwing moth, Synanthedon bicingulata (Staudinger, 1887), is a pest that infests various species of cherry trees. However, genetic information regarding the genus Synanthedon including S. bicingulata, is limited. In this study, we sequenced a complete mitochondrial genome (mitogenome) of the species. The 16,255 bp of S. bicingulata mitogenome differs from the typical gene arrangement formed in Lepidoptera: trnQ-trnS2-trnM-trnI arrangement between the A+T-rich region and the ND2 junction. Moreover, the genome has untranslated repetitive sequences in the intergenic space between lrRNA and trnV, as well as the CGA start codon in COI and the TTG start codon in ATP8. Similar observations are noted in species belonging to the tribe Synanthedonini within the genus Synanthedon.

The radiological characterization of SSCs (Structure, Systems and Components) plays one of the most important role for the decommissioning of KORI Unit-1 during the preparation periods. Generally, a regulatory body and laws relating to the decommissioning focus on the separation and appropriate disposal or storage of radiological waste including ILW (intermediate level waste), LLW (low level waste), VLLW (very low level waste) and CW (clearance waste), aligned with their contamination characteristics. The result of the preliminary radiological characterization of KORI Unit-1 indicated that, apart from neutron activated the RV (reactor vessel), RVI (reactor vessel internals), and BS (biological shielding concrete), the majorities of contamination were sorted to be less than LLW. Radiological contamination can be evaluated into two methods. Due to the difficulties of directly measuring contamination on the interior surfaces of the pipe, called CRUD, the assessment was implemented by modeling method, that is measuring contamination on the exterior surfaces of the pipes and calculating relative factors such as thickness and size. This indirect method may be affected by the surrounding radiation distribution, and only a few gamma nuclides can be measured. Therefore, it has limitation in terms of providing detailed nuclide information. Especially, α and β nuclides can only be estimated roughly by scaling factors, comparing their relative ratios with the existing gamma results. To overcome the limitation of indirect measurement, a destructive sampling method has been employed to assess the contamination of the systems and component. Samples are physically taken some parts of the systems or components and subsequently analyzed in the laboratory to evaluate detailed nuclides and total contamination. For the characterization of KORI Unit-1, we conducted the radiation measurement on the exterior surfaces of components using portable instruments (Eberline E-600 SPA3, Thermo G20-10, Thermo G10, Thermo FH40TG) at BR (boron recycle system) and SP (containment spray system) in primary system. Based on these results, the ProUCL program was employed to determine the destructive sample collection quantities based on statistical approach. The total of 5 and 8 destructive sample quantities were decided by program and successfully collected from the BR and SP systems, respectively. Samples were moved to laboratory and analyzed for the detail nuclide characteristics. The outcomes of this study are expected to serve as valuable information for estimating the types and quantities of radiological waste generated by decommissioning of KORI Unit-1.

벚나무류 수목은 생활권 수목(도시공원, 가로수 등)으로 전국에서 가장 많이 식재되고 있으며 전라 남도 또한 벚나무류 수목이 가로수 중 가장 많은 비율을 차지하고 있다. 복숭아유리나방은 농업환경 외에도 생활권 녹지공간에서도 벚나무류 수목을 가해하여 피해를 발생시키고 있는 것으로 보고되고 있으나, 생활권 수목과 산림에서의 관련 연구는 그 필요성에 비해 미흡한 상황이다. 본 연구는 전라남 도 내 생활권 수목을 기주로 하여 발생하는 복숭아유리나방의 발생소장을 조사하여 생활권 녹지공간 을 관리하는 기초자치단체들의 효용성 있는 방제 전략 수립에 기여하고자 한다. 복숭아유리나방의 발생 확인을 위해 육안 확인이 용이한 피해흔을 세 가지로 분류하였으며, 성페로몬 루어와 트랩으로 복숭아유리나방 성체를 유인･채집하였다. 그 결과, 4월 중순 첫 우화를 확인하였으며, 5월 중순과 8월 중순에 2번의 우화 최성기를 확인하여 이때의 유효적산온도를 조사하였다. 또한, 채집된 개체들 의 종 확인 및 유전적 다양성 확인을 위해 mitochondrial 내 cytochrome oxidase subunit I (COI) 유전자 염기 서열의 분석을 수행하였다.

This study assessed the utility of netted melon ‘Top Earl’s’ and cantaloupe melon ‘Alex’ as functional fruits by analysing their moisture content, vitreous sugar, folic acid, citric acid, and beta-carotene levels. High-performance liquid chromatography (HPLC) was used to analyse the free sugar, folic acid, citric acid, and beta-carotene levels. The moisture content was not significantly different between ‘Top Earl’s’ and ‘Alex.’ The glucose, sucrose, and fructose contents were three, two, and one-and-a-half fold higher in ‘Alex’ than in ‘Top Earl’s.’ Moreover, citric acid was approximately three times higher in ‘Alex’ than that in Top Earl’s.’ However, the folic acid content was higher in ‘Top ‘Earl’s’ than ‘Alex,’ and the amount was 124 μg / 100 g FW and 112 μg / 100 g FW respectively. ‘Beta-carotene was undetectable in ‘Top Earl’s,’ whereas it was 1000 μg / 100 g FW in ‘Alex.’ β-carotene, a substance that is converted in the body into vitamin A and acts as an antioxidant, is an important component in healthy food. These results suggested that the cantaloupe melon ‘Alex’ has a higher free sugar content and functional ingredients, such as antioxidants, including citric acid and beta carotene, than the netted melon ‘Top Earl’s.’

High-entropy alloys (HEAs) are attracting attention because of their excellent properties and functions; however, they are relatively expensive compared with commercial alloys. Therefore, various efforts have been made to reduce the cost of raw materials. In this study, MIM is attempted using coarse equiatomic CoCrFeMnNi HEA powders. The mixing ratio (powder:binder) for HEA feedstock preparation is explored using torque rheometer. The block-shaped green parts are fabricated through a metal injection molding process using feedstock. The thermal debinding conditions are explored by thermogravimetric analysis, and solvent and thermal debinding are performed. It is densified under various sintering conditions considering the melting point of the HEA. The final product, which contains a small amount of non-FCC phase, is manufactured at a sintering temperature of 1250oC.

이탈리안벌인 A, C, F계통과 코카시안벌인 D, V계통을 2005년부터 2007년까지 국내에서 수집하였다. 수집한 계통은 육종을 위해 격리 된 섬에서 근친교배를 통해 순계로 분리하였다. 이 연구는 꿀, 로열젤리 다수확계통 선발에 있어 개체군 선발과 육종 효율을 높이기 위해 수행되 었다. 23 개의 형태학적 특성을 평가하고 두 아종의 기존 데이터와 비교한 결과, 이탈리안벌 순계계통은 코카시안벌 순계 계통과 달리8개의 특성이 기존의 이탈리안벌과 유사해 더 많은 특성이 보존되고 있음을 알 수 있었다. 또한 국내에서 유지되고 있는 순계들은 타 지역의 동일 계통과 차 이를 보여 분리된 순계의 형태적인 특징이 확인되었다.

PURPOSES: Using recyclable materials in asphalt pavement industry is one of the essential tasks not only for saving construction budgets but also for mitigating environmental pollutions. Over the past decades, several efforts have been made by road maintenance agencies to incorporate various recyclable materials into virgin asphalt paving mixtures. As a result, reclaimed asphalt pavement (RAP), which consists of old pavement material was selected as one of most widely used recyclable materials. In this paper, the effects of using different amounts of single-recycled RAP (SRRAP) and double-recycled RAP (DRRAP) on the low-temperature characteristics of asphalt mixtures were investigated. METHODS: To evaluate the low-temperature characteristics of SRRAP and DRRAP mixtures, two experiments, the bending beam mixture creep test and semicircular bending fracture test were performed. The experimental parameters: creep stiffness, m-value, thermal stress, critical cracking temperature, fracture energy, and fracture toughness were computed then compared. RESULTS : RAP mixtures (SRRAP or DRRAP) showed lower mechanical performance compared with conventional asphalt mixtures. The differences became distinct with increased RAP addition. However, the performance differences between SRRAP and DRRAP mixtures were not significant in all cases, which indicate the possible application of re-recycling technology (DRRAP) in the asphalt pavement industry. CONCLUSIONS : The addition of RAP to virgin asphalt can mitigate low-temperature performance despite the improvement in fracture performance observed in some cases. Therefore, using RAP (SRRAP or DRRAP) mixtures on inter or sublayer construction, but not on the surface layer, is recommended. Moreover, the possibility of applying double-recycling technology in asphalt pavement industry can be introduced in this study because not significant performance differences were found between SRRAP and DRRAP mixtures especially at low temperature.

This study investigates the effects of the type of advertisement, brand extension, and consumer innovativeness on the credibility of fashion advertisements. The factorial design is constructed as a 2(type of fashion advertisement: general vs. cross-media) × 2(consumer innovativeness: high vs. low) × 2(the type of fashion brand extension: similar vs. dissimilar) three-way mixed design in which consumer innovativeness is the between-subjects variable. Subjects of this study included 210 men and women in their 20s and 30s who resid in Seoul and had SNS experiences. Frequency analysis, credibility analysis, three-way ANOVA, and simple interaction analysis were conducted using the SPSS 20.0 statistics package. The results are as follows: First, the type of fashion advertisement had a significant effect on advertising credibility. Cross-media advertisements had a more positive effect than general advertisements on all of the dependent variables. Also, the type of brand extension and consumer innovativeness showed significant effect on advertising credibility and the interaction effect between the type of fashion advertisement and consumer innovativeness was significant. Lastly, the effect of different types of brand extensions on advertising credibility showed a significant difference according to consumer innovativeness. Thus, a marketing strategy using cross-media advertising is proven to be effective in gaining consumer trust for a fashion brand.

PURPOSES: Using recycled asphalt materials (called Reclaimed Asphalt Pavement: RAP) from existing asphalt pavement layers in newly constructed asphalt pavement is an essential option not only for lowering the construction budget but also for mitigating environmental pollution for society. For this reason, many pavement agencies in South Korea, the USA, and Canada have observed the effect of RAP on conventional asphalt pavement to evaluate and set proper material specifications and addable amounts. In this paper, effect of recyclable material on low-temperature performance of asphalt materials was investigated with two different mechanical tests. Among the recyclable material sources, RAP and Taconite Aggregate (TA), which is mainly produced in northern Minnesota (USA), were considered. METHODS : To evaluate the low-temperature mechanical performance of a RAP mixture, two different experimental tests (In-Direct Tensile (IDT) low temperature creep test and Semi-Circular Bending (SCB) test) were considered. The mechanical parameters creep-stiffness, relaxation modulus, fracture energy, and fracture toughness were computed then compared. RESULTS: More brittle characteristics were observed with RAP-added asphalt mixtures compared to the conventional asphalt mixtures, as expected. However, the differences of computed mechanical performances were not significantly distinct for RAP mixtures compared to conventional mixtures when the RAP proportion was around 20%, and with the addition of TA up to 20%. CONCLUSIONS : It can be concluded that up to 20% of RAP addition (along with TA up to 20%) in a virgin asphalt mixture does not provide significant performance reduction. This addable proportion can be viewed as a successful minimum level when considering the addition of RAP to hot-mix asphalt (HMA). Moreover, applying TA with RAP could offer a successful alternative for asphalt recycling and the materials industry.

PURPOSES : Thermal cracking (also called low-temperature cracking) is a serious stress for asphalt pavement, especially in eastern South Korea, the northern USA, and Canada. Thermal cracking occurs when the level of thermal stress exceeds the corresponding level of low temperature strength of the given asphalt materials. Therefore, computation of thermal stress is a key factor for understanding, quantifying, and evaluating the level of low-temperature cracking resistance of asphalt pavement. In this paper, two different approaches for computing thermal stress on asphalt binder were introduced: Hopkins and Hamming’s algorithm (1967) and the application of a simple power-law function. All the computed results were compared visually; then the findings and recommendations were discussed. METHODS: Thermal stress of the tested asphalt binder was computed based on the methodology introduced in previous literatures related to viscoelastic theory. To perform the numerical analysis, MATLABTM 2D matrix-correlation and Microsoft Excel visual basic code were developed and used for the function fitting and value-minimization processes, respectively. RESULTS : Different results from thermal stress were observed with application of different computation approaches. This variation of the data trends could be recognized not only visually but also statistically. CONCLUSIONS: It can be concluded that these two different computation approaches can successfully provide upper and lower limits (i.e. boundaries) for thermal stress prediction of a given asphalt binder. Based on these findings, more reliable and reasonable thermal stress results could be provided and finally, better pavement performance predictions could also be expected.

In this paper, first the aging level of Stone Mastic Asphalt (SMA): one of the widely applied asphalt mixture types for highway construction in South Korea, was analysed then those aging effects on various performance characteristics were studied. Then, a suitable methodology for improving performance on real asphalt pavement construction site was recommended. To fulfil the objective, Gel-Permeation Chromatography (GPC) experimental work was performed on various aged SMA mixtures by measuring Large Molecular Size (LMS) then the Absolute Viscosity (AV) value was predicted based on the findings in the previous step. As results, it was found that types of performance change on aged asphalt binders could be estimated by computed Estimated Absolute Viscosity (EAV) values. It also should be mentioned that the performances of tested SMA mixture presented negative trend after aging effect increases; even though the performance deterioration level of SMA is lower than that of regular Dense Grade Asphalt (DGA) mixture, which means proper reactions are recommended to keep its quality. Moreover, better resistance against aging effect was found by applying Hydrated-Lime (HL) or Low Density Poly-Ethylene (LDPE) compared to any other additives on asphalt mixtures. A unique Aging Quantity (AQ) model for SMA mixtures was developed by using two factors: collected aging time data set from field (and/or laboratory) and AV values based on different temperature conditions. The Predicted Absolute Viscosity (PAV) on SMA mixtures was computed by using the introduced AQ model then the aging level of asphalt binder was estimated as a final step. Additionally, five performance characteristics of asphalt binder: Dynamic Shear Rheometer(DSR) high temperature limit, Bending Beam Rheometer (BBR) low temperature limit, G*/sinδ, Creep stiffness, and m-value, were analysed. The value of AV showed the best performance for predicting and representing aging level. Finally, the aging level of given asphalt mixtures in the field can be easily predicted by choosing one of three approaches presented in this research. It can be concluded that the performance of asphalt pavement can be increased by selecting proper materials and performance prediction methodologies introduced in this study. However, only limited number of specimens were considered in this study due to limit of raw materials and laboratory equipment condition. Therefore, extensive experimental works with various types of asphalt materials are recommended for strengthen findings in this thesis as a future research.

This study was performed to investigate how changing the period of light and dark influences the vegetative growth and the photosynthesis of Doritaenopsis Queen Beer ‘Mantefon’. Clones of Dtps. Queen Beer ‘Mantefon’ at 4-month-old stage were grown in a closed-plant factory system with four different light/dark cycles; 06/06 h, 08/08 h, 10/10 h, and 12/12 h. Temperature and relative humidity were set at 28oC and 80%, respectively, with a photosynthetic photon flux density of 160 ± 10 μmol·m-2·s-1. Repetitive measurements showed that the leaf length and the leaf width were the longest under 12/12 h closely followed by 10/10 h. The fresh weight and the dry weight of leaves and roots were the heaviest at 10/10 h treated samples. Different CO2 uptake patterns were observed from different light/dark cycles. Under 10/10 h and 12/12 h treatments, the CO2 uptake started at early dark period. When the light/dark cycles were shortened to 06/06 h and 08/08 h, the CO2 uptake started at the middle of dark period. Total CO2 uptake amounts were the highest under 12/12 h treatment followed by 10/10 h, 06/06 h, and 08/08 h treatments. Quantitative measurements showed that the vegetative growths under 10/10 h treatment were comparable with that of 12/12 h treatment. These studies indicated that manipulating light/dark can modify the photosynthesis patterns and vegetative growth of Dtps. Queen Beer ‘Mantefon’, resulting in the reduction of the production period.

To investigate the photosynthesis and growth of Cymbidium ‘Red Fire’ grown under different nitrogen fertilization and night-interruption (NI) illumination, we exposed plants to 9-h short days (SDs), SDs + 3 - 7 μmol·m-2·s-1 NI (low-light intensity of NI, LNI), or SDs + 120 μmol·m-2·s-1 NI (high-light intensity of NI, HNI) illumination with nitrogen supplemented at 0, 100, 200, or 400 mg·L-1. Cymbidium photosynthesized under 3 – 7 μmol·m-2·s-1 NI regardless of nitrogen treatment, promoting growth. HNI treatments and nitrogen supplements at 100 mg·L-1 increased the leaf chlorophyll concentration. LNI increased net CO2 assimilation (An), transpiration, and stomatal conductance. HNI without supplemental nitrogen reduced midday An. However, HNI with supplemental nitrogen increased midday An. Supplemental nitrogen should be provided to Cymbidium when high-irradiance NI is used to promote growth.

Flowering responses under night interruption (NI) condition were determined in Doritaenopsis ‘Fuller’s Sunset ’, ‘Green Beer’, ‘Little Gem Stripes’, and ‘Queen Beer’ during their reproductive stages. Plants were grown under 10/14 h ambient light/dark (control), 10 h ambient light with night interruption (22 : 00-02 : 00 HR) at low light intensity of 3-7 μmol • m−2 • s−1 (LNI) and 10 h ambient light with NI at high light intensity of 120 μmol • m−2 • s−1 (HNI) conditions after flower spike emergence. Time to visible bud and flowering decreased more in the plants grown under HNI than those grown under LNI or control conditions. The number of buds or flowers increased in the plants grown under both LNI and HNI conditions compared to those grown under control condition for all cultivars. The tallest plants at flowering were in the HNI group in ‘Queen Beer’, ‘Green Beer’, and ‘Fuller’s Sunset’, however, the plant height was not significantly different among the treatments in ‘Little Gem Stripes’. NI with low light intensity or high light intensity can be used effectively to promote flower opening, but not with low light intensity at flower development stage. To obtain early flowering with high quality plants using NI treatment during their reproductive stage, high light intensity strategies could be suggested in Doritaenopsis cultivation.