Because of depletion of fossil fuel from the earth curst and increase of environmental concerns, in search of an efficient alternative to the traditional carbon black (CB), a biochar known as rice husk carbon (RHC) has been examined here as a filler material to develop the EPDM composite. In this regard, the ball milled RHC was further treated with ultrasonic wave and used with or without its surface treatment by the silane coupling agent [i.e., 3-mercaptopropyl triethoxysilane (3-MPTMS)]. Among the RHC, ultrasonic treated RHC (UHC) and silane treated UHC (USHC), the EPDM composite of USHC showed nearly similar tensile strength to that of the CB (e.g., CB: 33.88 kgf/cm2, USHC: 31.38 kgf/cm2 at 20 wt% filler loading) with an enhanced elongation at break (e.g., CB: 206%, USHC: 342% at 20 wt% filler loading) and surprisingly much less compression set value (CB: 40.87%, USHC: 18.95% even after 40 wt% of filler loading). Compared to RHC, the UHC also showed its better performance next to the USHC. In addition to presence of both the carbon and silica in RHC and additional silica within the flexible aliphatic chain in USHC, the disintegration of RHC by ultrasonic treatment towards its narrow particle distribution, smaller particle size, and increased surface area is considered very much effective to develop the corresponding high performance EPDM composites. Thus, the use of waste material, i.e., rice husk through the ultrasonication of RHC followed by its surface treatment can be used as a potential filler material to prepare the environment friendly and cost effective high performing composites to be used in different efficient end products, and motivated further for industrial upscaling.

Stainless steel, a type of steel used for high-temperature parts, may cause damage when exposed to high temperatures, requiring additional coatings. In particular, the Cr2O3 product layer is unstable at 1000oC and higher temperatures; therefore, it is necessary to improve the oxidation resistance. In this study, an aluminide (Fe2Al5 and FeAl3) coating layer was formed on the surface of STS 630 specimens through Al diffusion coatings from 500oC to 700oC for up to 25 h. Because the coating layers of Fe2Al5 and FeAl3 could not withstand temperatures above 1200oC, an Al2O3 coating layer is deposited on the surface through static oxidation treatment at 500oC for 10 h. To confirm the ablation resistance of the resulting coating layer, dynamic flame exposure tests were conducted at 1350oC for 5–15 min. Excellent oxidation resistance is observed in the coated base material beneath the aluminide layer. The conditions of the flame tests and coating are discussed in terms of microstructural variations.

Powder quality, including high flowability and spherical shape, determines the properties of additively manufactured products. Therefore, the cheap production of high-quality powders is critical in additive manufacturing. Radio frequency plasma treatment is an effective method to fabricate spherical powders by melting the surface of irregularly shaped powders; in the present work, mechanically milled Zr powders are spheroidized by radio frequency plasma treatment and their properties are compared with those of commercial Zircaloy-2 alloy powder. Spherical Zr particles are successfully fabricated by plasma treatment, although their flowability and impurity contents are poorer than those of the commercial Zircaloy-2 alloy powder. This result shows that radio-frequency plasma treatment with mechanically milled powders requires further research and development for manufacturing low-cost powders for additive manufacturing.

In this study, the different effects of ultrasonic surface treatment on rice husk carbon (RHC) were studied. The RHC was treated by ultrasound in water, silane, and polyphosphoric acid. Particle size, chemical changes of the surface, dispersion, and surface area were all investigated. The ultrasonic treatment in acid increased the hydrophilicity of RHC. The ultrasonic treatment in silane produced silanol having amphiphilic property. The surface treatment of RHC in a water and acid medium with ultrasound increased the surface area and pore volume of RHC. Therefore, it is expected that the ultrasonically treated RHC as a biofiller is an effective substitute to commercial filler. This would have a positive effect both economically and environmentally.

Gonggeom-ji is designated wetland protected area by the Ministry of Environment of Korea in 2011 because of it’s high biodiversity and historic value. It contains a reservoir, paddy and forest site which has diverse niches for insects. Three transect lines of 50m were designated. Data were collected in May, October, November in 2017 represented as seasons for spring, summer and autumn respectively. Quantitative methods were conducted along each transect line by sweeping and pitfall trap. Based on this study total of 1079 individuals of insect fauna were collected, representing 170 species in 60 families and 8 orders. The highest diversity, richness and evenness index were observed in the forest site in May(4.77, 8.6 and 0.91 respectively) and the highest dominance index was observed in the forest site in November(0.64). The highest similarity index was observed in the reservoir site in May and August(0.519).

CD63, a member of tetraspanin membrane protein family, plays pivotal role in cell growth, motility, signal transduction, host-pathogen interactions and cancer. In this work, the cDNA encoding CD63 homologue (TmCD63) was cloned from larvae of coleopteran beetle, Tenebrio molitor. The cDNA is comprised of an open reading frame of 705 bp, encoding putative protein of 235 amino acid residues. In silico analysis shows that the protein has four putative transmembrane domains and one large extracellular loop. The characteristic ‘Cys-Cys-Gly’ motif and ‘Cys188’ residues are highly conserved in the large extracellular loop. Phylogenetic analysis of TmCD63 revealed that they belong to the insect cluster with 50-56% identity. Analysis of spatial expression patterns demonstrated that TmCD63 mRNA is mainly expressed in gut and Malphigian tubules of larvae and the testis of the adult. Developmental expression patterns of CD63 mRNA showed that TmCD63 transcripts are detected in late larval, pupal and adult stages. Interestingly, TmCD63 transcript was upregulated the maximum 4.5 fold in response to DAP-type peptidoglycan during the first 6 h, although other immune elicitors also made significant increase in the transcript level at later time-points. These results suggest that CD63 might contribute to T. molitor immune response against various microbial pathogens.

Background : Chrysanthemum indicum L. is used in medicine, for bee, ornamental as multivoltinism plant resources. Since ancient times, Chrysanthemum indicum L. had been widely used as drug and tea. To diversity and increase the demand of Chrysanthemum, it is breeding for medicinal herb, tea and ornamental flower. Therefore size and shape of plant, color of flower have been used for cross breeding. CI2013 lines collected from Jeju have been used for landscape and ornament. and CI2010 lines collected from Sancheong have been used for medicinal herb tea. As a result, many new lines were developed. Therefore it was carried out to use as a date for new varieties through the characterization of good lines. Methods and Results : 7 lines were investigated and these plants were forstered and cultivated from Gyeongsangnam-do Agricultural Research & Extension Services (Hamyang). Breeding Lines were CI201001, CI201002, CI201005, CI201006, CI201303, CI201307, CI201401. The shape of CI201303 and CI201307 were round, plant height is low and width is wide, it may be used for landscape and ornament. As the size of flower in CI201005 was big, it may be used for medicinal herb tea. Conclusion : CI201303 and CI201307 lines were good for landscape and ornament because of round shape. CI201005 line was good for medicinal herb tea because of big flower.

Background : Cucuma longa L., in the family Zingiberaceae, is distributed in tropical and/or sub-tropical regions mainly in India and China. This species is commonly called tumeric, powder is used as medicinal herbs and/or flavor enhancer. It has been cultivated in southern region mainly Jindo. However, it might be possible to extend cultivation region due to rise in average temperature. In order to select superior lines, agronomic characteristics is commonly used. Because this is not the ultimate solution, the DNA marker approach has benefited the modern plant breeding. Therefore an easy approach by using one kind of primer have been developed from random amplification of polymorphic DNA sequences (RAPD) to discriminate effectively between different cultivars of Cucuma species Methods and Results : DNAs were extracted from the harvested roots of Cucuma sp. using DNeasy plant Mini kit (Qiagen, Hilen, Germany). These plants cultivated from GARES (Hamyang) and used for PCR amplification. The relative concentration of the extracted DNA was estimated Nano Drop ND-1000 (NanoDrop Technologies, Wklmington, De, USA) and final DNA concentration was adjusted to 5.5 ng/㎕. In this study 9 primer pairs were tested on 8 Cucuma sp. These primers showed polymorphism in Cucuma sp. The cluster dendogram showed that the similarity coefficients ranged from 0.68 to 0.87, CUR02 turned out to be CUR11, and CUR16 is similar to CUR17. Conclusion : These finding could be used for further research on cultivar development by using molecular breeding techniques and for conservation of the genetic diversity of Cucuma species. These data on polymorphism difference based on RAPD will be give us invaluable breeding information by selection of superior lines.

This study monitored the morphological development of embryo, larvae and juvenile yellowtail kingfish, Seriola lalandi, for their aquaculture. The fertilized eggs obtained by natural spawning were spherical shape and buoyant. Fertilized eggs were transparent and had one oil globule in the yolk, with an egg diameter of 1.35 ± 0.04 mm and an oil globule diameter of 0.32 ± 0.02 mm. The fertilized eggs hatched 67–75 h after fertilization in water at 20 ± 0.5°C. The total length (TL) of the hatched larvae was 3.62 ± 0.16 mm. During hatching, the larvae, with their mouth and anus not yet opened. The yolk was completely absorbed 3 days after hatching (DAH), while the TL of post-larvae was 4.72 ± 0.07 mm. At 40 DAH, the juveniles had grown to 30.44 ± 4.07 mm in TL, body depth increased, the body color changed to a black, yellow, and light gray-blue color, and 3–4 vertical stripes appeared. At 45 DAH, the juveniles were 38.67 ± 5.65 mm in TL and 10.10 ± 0.94 mm in body depth. The fish were green with a light orange color, with 7 faint green-brown stripes on the sides of their body. At 87 DAH, the juveniles had grown to 236.11 mm in TL, 217.68 mm in fork length, and 136.5 g in weight. The fish resembled their adult form, with a light yellow-green body color, loss of the pattern on the sides of their body, and a yellow coloration at the tip of the caudal fin.

This study was conducted to develop a fast and efficient screening method to determine the quantity of fatty acid in peanut oil for high oleate breeding program. A total of 329 peanut samples were used in this study, 227 of which were considered in the calibration equation development and 102 were utilized for validation, using near infrared reflectance spectroscopy (NIRS). The NIRS equations for all the seven fatty acids had low standard error of calibration (SEC) values, while high R2 values of 0.983 and 0.991 were obtained for oleic and linoleic acids, respectively in the calibration equation. Furthermore, the predicted means of the two main fatty acids in the calibration equation were very similar to the means based on gas chromatography (GC) analysis, ranging from 36.7 to 77.1% for oleic acid and 7.1 to 42.7% for linoleic acid. Based on the standard error of prediction (SEP), bias values, and R 2 statistics, the NIRS fatty acid equations were accurately predicted the concentrations of oleic and linoleic acids of the validation sample set. These results suggest that NIRS equations of oleic and linoleic acid can be used as a rapid mass screening method for fatty acid content analysis in peanut breeding program.