Submarining is a phenomenon in that the lap belt goes over the pelvis of the occupant during a frontal crash. It is known to be one of the causes of serious abdominal injuries for the belted occupant. The goal of the current study was to investigate the effect of both the belt geometry and dummy variations on the occurrence of submarining. A series of quasi-static belt-pull tests were performed to evaluate the influence of the parameters on the occurrence of the submarining. The main influencing factor of the submarining was the lap belt angle. The tear or wrinkle of the dummy clothing and torso angle relative to the pelvis also affected the propensity of the submarining. Therefore, these parameters need to be closely monitored to obtain repeatable test results.

The design of nuclear fuel storage and handling area includes the activities related to the storage and inspection before fuel loading, transfer into the reactor, removal of irradiated fuel to the spent fuel storage rack, underwater handling and storage, and handling into a shipping cask. The purpose of this study is to provide the design requirements for the spent fuel pool to be prevented from the loss of cooling water and for heavy load control to prevent any load drop resulting in damage to safetyrelated systems during heavy load handling in accordance with the regulatory guidelines. And another purpose is to review the sizing of minimum wet storage capacity in the spent fuel pool based on the maximum refueling batch from the core during refueling plus a full core off-load of fuel assemblies and the minimum discharge burnup spent fuel storage during the design life of plant requested by the utility. As the results of this study, the current general arrangement for the spent fuel storage and handling area and the minimum storage capacity are evaluated. These can be good recommendations to enhance more safe and efficient if implemented to the new nuclear power plants.

This study provides technical information about the nuclear fuel handling process, which consists of various subprocesses starting from new fuel receipt to spent fuel shipment at a nuclear power plant and the design requirements of fuel handling equipment. The fuel handling system is an integrated system of equipment, tools, and procedures that allow refueling, handling and storage of fuel assemblies, which comprise the fuel handling process. The understanding and reaffirming of detailed code requirements are requested for application to the design of the fuel handling and storage facility. We reviewed the design requirements of the fuel handling equipment for its adequate cooling, prevention of criticality, its operability and maintainability, and for the prevention of fuel damage and radiological release. Furthermore, we discussed additional technical issues related to upgrading the current code requirements based on the modification of the fuel handling equipment. The suggested information provided in this paper would be beneficial to enhance the safety and the reliability of the fuel handling equipment during the handling of new and spent fuel.

This researcher selected basic variable to investigate the effective relations of establishment and management of resting facility on reduction of constructional disasters and safety accidents and improvement of working efficiency for construction workers. Based on the measured variables, this researcher investigated phenomenon, recognition and satisfaction for using and demanding resting facility by long-term construction in construction site for workers of huge construction site in Seoul, conducted survey of total 219 questionnaires so as to grasp implications of workers' resting facility demanded in long-term huge construction site and effects on reduction of disasters and conducted structural equation analysis. As a result, resting faciity factor, management factor, and hygienic service factor were significant and resting and food factors were not significant. Therefore, it's expected to reduce personal disaster by improving quality of constructional resting facility, hygienic service, and resting facility management and especially, resting facility management factor makes lots of effects on prevention of personal disasters, so it was a strongly main factor. By suggesting the guideline of establishment and management service of proper resting facility through this research, positive recognition and constructional disaster reduction can be expected in construction site.

상부 탑재형 노내계측기(TM-ICI) 개발은 원자로하부헤드 대신 원자로상부헤드로 계측기를 삽입함으로써 중대사고 위험을 줄이기 위해 진행 중이다. 이 개발 과제의 일환으로, NUREG/CR-6909와 Code Case N-761의 두 방법에 따라 TM-ICI 노즐에 대한 환경피로평가가 수행되었다. TM-ICI 노즐은 level A, level B 및 시험 조건에서의 과도조건에 따른 하중을 받는데 이에 대해 피로평가를 해야 한다. 원자로냉각재환경이 고려된 TM-ICI 노즐의 누적사용계수는 1이하로 평가되었고, 이는 ASME Code 허용기준을 만족한다.

산업화를 위한 지구자 및 12가지 식물성 원료 추출물의 생리학적 효과를 평가하기 위하여, 만성 에탄 올을 투여한 마우스 혈청 내에서의 생리학적 지표 및 간과 뇌 조직 내에서의 산화적 스트레스에 대한 보호효과를 확인하였다. 에탄올을 투여한 마우스의 혈당은 정상 대조군 그룹(NG)과 에탄올 투여 그룹 (EG)에서 각각 119.43mg/dL, 305.25mg/dL로 나타났고, 에탄올과 혼합 추출물을 동시에 투여한 그룹 (100, 200mg/kg body weight + 25% ethanol 5g/kg body weight, ME100, ME200)에서 각각 272.76mg/dL, 234.60mg/dL로 감소하였다. 혈중 에탄올 함량은 EG에서 4.08mg/dL를 나타내었고 ME100, 200에서 각각 3.85mg/dL, 3.08mg/dL로 감소하였으며, 혈중 아세트알데하이드 함량은 18.72mg/dL에서 각각 15.76mg/dL, 15.16mg/dL로 감소하였다. 또한 ME100, ME200은 혈청 내의 생 리학적 지표에서 간 독성 지표인 glutamine pyruvic transaminase(GPT), glutamic oxaloacetic transaminase(GOT)와 신장 독성 지표인 blood urea nitrogen(BUN), creatine(CRE), 혈중 total cholesterol(TCHO), triglyceride(TG)의 함량이 유의하게 감소하였다. 뇌 조직에서 에탄올에 의해 acetylcholinesterase(AChE)가 EG(116.10%)에서 NG(100.00%)와 비교하였을 때 증가된 활성을 나타냈 으나, ME에서 각각 109.00%와 108.47%로 유의적으로 감소하였다. ME에서 EG에 비해 간과 뇌 조직에 서 superoxide dismutase(SOD)의 함량이 증가하였고, oxidized glutathione(GSH)/total GSH 비율과 malondialdehyde(MDA)의 함량이 감소하였다. 이러한 결과들을 통해 지구자를 포함한 혼합 추출물은 간, 뇌 조직 및 혈액 등에서 만성 에탄올 섭취에 의해 유발된 산화적 스트레스를 효과적으로 보호할 수 있는 제품으로의 개발이 가능할 것으로 판단된다.

본 논문에서는 원통형 쉘에 부착된 노즐의 구조 건전성평가를 수행하고 그 결과를 비교하기 위해 2차원(2D)과 3차원(3D)해석이 수행되었다. 현재 원자력 발전소에서 사용되는 3개의 노즐을 구조 건전성평가를 위해 선정하였고, 각각 노즐은 내부압력, 온도변화 및 외부하중을 받는다. 내부압력에 대한 2D 해석은 1.5이상의 계수 값을 이용하거나 응력집중 계수를 적용하여야 하고, 온도변화에 대한 2D와 3D 해석결과는 피복재의 유무와 상관없이 서로 거의 비슷하며, 외부하중에 대한 WRC Bulletin 297에 의한 해석결과는 3D 해석결과보다 더 보수적임을 확인할 수 있었다.

본 논문에서는 CFT 구조의 강관과 내부 충전 콘크리트 간 복합거동을 유한요소해석 시 적절하게 반영하기 위해 강관과 콘크리트 간 부착 슬립관계 묘사를 위한 알고리즘을 제시하였다. 내부 충전 콘크리트에 축방향 하중 발생 시, 강관과 콘크리트 간 마찰로 인해 강관으로 하중이 전달되며, 이에 따른 강관 슬립량과 힘의 평형관계를 통해 등가강성을 통해 부착관계를 파악할 수 있다. 실제 원형 CFT 부재의 부착응력 실험을 통해 측정된 수직 및 수평 방향 응력 분포 결과와 제안된 해석 기법을 통해 산정된 응력 분포의 비교를 통해 제안된 해석 기법의 타당성을 검증하였다. 또한 비선형 유한요소해석 시 강관과 콘크리트의 부착 거동 묘사에 따라 CFT 기둥의 거동 특성에 영향을 미치게 되므로 축방향 하중이 작용하는 CFT 부재 실험결과와 제안된 부착-슬립 모델을 반영한 유한요소해석 결과의 하중-변위 곡선 관계 비교를 통해 제안된 기법의 적합성을 검증하였다.

Fluorine-doped SnO2 (FTO) thin film/Ag nanowire (NW) double layers were fabricated by means of spin coating and ultrasonic spray pyrolysis. To investigate the optimum thickness of the FTO thin films when used as protection layer for Ag NWs, the deposition time of the ultrasonic spray pyrolysis process was varied at 0, 1, 3, 5, or 10 min. The structural, chemical, morphological, electrical, and optical properties of the double layers were examined using X-ray diffraction, X-ray photoelectron spectroscopy, field-emission scanning electron microscopy, transmission electron microscopy, the Hall effect measurement system, and UV-Vis spectrophotometry. Although pure Ag NWs formed isolated droplet-shaped Ag particles at an annealing temperature of 300 oC, Ag NWs covered by FTO thin films maintained their high-aspect-ratio morphology. As the deposition time of the FTO thin films increased, the electrical and optical properties of the double layers degraded gradually. Therefore, the double layer fabricated with FTO thin films deposited for 1 min exhibited superb sheet resistance (~14.9Ω/□), high optical transmittance (~88.6 %), the best FOM (~19.9 × 10−3 Ω−1), and excellent thermal stability at an annealing temperature of 300 oC owing to the good morphology maintenance of the Ag NWs covered by FTO thin films.

In this study, the odor causing in the under-fired charbroiling restaurant was reported in literature investigation,pilot test and field experimental verification. The charbroiling restaurant causes odor complaints of Neighbors soefficient reduction method is requested. Acetaldehyde, ammonia, sulfur compound and the oil mist of white smokeare found to cause odor from the charbroiling restaurant. Pilot test results show that in the removal efficiency ofodor, Electrostatic Precipitation was 67.4%, absorption was 81.2%, adsorption was 74.2% and the ElectrostaticPrecipitation & Adsorption the hybrid system with 85.7% respectively. In the same condition of the hybrid system(Electrostatic Precipitation & Adsorption), the odor removal efficiency were higher when the design parameterssuch as the discharge voltage and current were high. The process efficiency were higher when as the implanterpole was cylindrical. However, the process efficiency rapidly reduced due to the contamination of the processcomponent or material, as the operating time of the equipment is increased. Therefore, fixed maintenance and repairof the equipment is found to be are very important, for long term operation. Therefore, as the experimental resultof this study, applying hybrid system removed odors caused in under-fired charbroiling restaurant which areunregulated, is more effective device that settle civil complaints and preserve environment.

In this study, we investigated the characteristics of Volatile Organic Compounds(VOCs) emission from painting and printing facilities in the Pyeongdong industrial complex in Gwangju. In addition, the objective was to understand the distribution characteristics of VOCs in the ambient air in industrial complexes affected by painting and printing facilities. The painting facility mainly emitted toluene, acetone, butyl acetate, 4-methyl-2-pentanone, ethyl acetate, 1-butanol, methyl ethyl ketone, m,p-xylene, o-xylene, 4-ethyltoluene, ethylbenzene, 3-ethyltoluene, and 1,2,4-trimethylbenzene. The main emission components in printing facilities were methyl ketone, ethyl acetate, acetone, 2-propanol, toluene, heptane, and butyl acetate. Ethyl acetate, toluene, 2-butanone, acetone, butyl acetate, 2-propanol, xylenes, and 4-methyl-2-pentanone were detected in the ambient air of the Pyeongdong industrial complex, consistent with the VOCs emitted by painting and printing facilities. The average concentration of seasonal TVOCs followed an order of winter > fall > spring > summer, whereas the concentrations of daytime and nighttime TVOCs were generally higher at night than those during the day, and the wind speed was greater during the day than it was at night. Based on a factor analysis of VOCs in the ambient air of Pyeongdong industrial complex, it is considered that organic solvents used in coating, printing, and electronics manufacturing facilities, as well as diesel vehicle emissions played a major role.

We analyzed the recent characteristics of Particulate Matter (PM) including PM10 (PM with diameter of less than 10μm) and PM2.5 (PM with diameter of less than 2.5μm) observed in Busan metropolitan area, and compared them with those measured in Seoul metropolitan area. This analysis includes the monthly, seasonal, and annual variations and differences, in emissions and chemical compositions observed in both Busan and Seoul areas. Synoptic meteorological conditions were investigated at the time when high PM concentrations occurred in each of the two areas. The results showed clearly decreasing trends of annual mean concentrations with strong seasonal variations: lower in summer and higher in winter in both areas. In comparison with Seoul, the seasonal variation in Busan demonstrated relatively lower, but showed greater summer fluctuations than in Seoul metropolitan area. This is implying the importance of secondary generation of PM in summer via active photochemical reaction in Busan area. In high concentration days, Busan’s chemical composition of sulfate was higher than that of nitrate in summer, whereas nitrate was higher than sulfate in Seoul. The ratios of NO3 - to SO4 2-(N/S ratio) showed lower in Busan approximately by a factor of 1/2(half of N/S ratio) in Busan compared with that in Seoul. Others such as synoptic characteristics and emission differences were also discussed in this study.

Fas ligand (FasL) and its receptor Fas have been implicated in granulosa cell apoptosis during follicular atresia. Although interferon-gamma (IFN-γ) is believed to be involved in the regulation Fas expression in differentiated granulosa or granulosa-luteal cells, the expression of this cytokine and its role in the regulation of the granulosa cell Fas/FasL system and apoptosis during follicular maturation have not been thoroughly investigated. In the present study, we have examined the presence of IFN-γ in ovarian follicles at different stage of development by immunohistochemistry and related their relative intensities with follicular expression of Fas and FasL, and with differences in granulosa cell sensitivity to Fas activation by exogenous agonistic Anti-Fas monoclonal antibody (Fas mAb). Although IFN-γ immunostaining was detectable in oocyte and granulosa cells in antral follicles, most intense immunoreactivity for the cytokine was observed in these cells of preantral follicles. Intense immunoreactivity for IFN-γ was most evident in granulosa cells of atretic early antral follicles where increased Fas and FasL expression and apoptosis were also observed. Whereas low concentrations of IFN-γ (10-100 U/mL) significantly increased Fas expression in undifferentiated granulosa cells (from preantral or very early antral follicles) in vitro, very higher concentrations (≥ 1,000 U/mL) were required to up-regulate of Fas in differentiated cells isolated from eCGprimed (antral) follicles. Addition of agonistic Fas mAb to cultures of granulosa cells at the two stages of differentiation and pretreated with IFN-γ (100 U/mL) elicited morphological and biochemical apoptotic features which were more prominent in cells not previously exposed to the gonadotropin in vivo. These findings suggested that IFN-γ is an important physiologic intra-ovarian regulator of follicular atresia and plays a pivotal role in regulation of expression of Fas receptor and subsequent apoptotic response in undifferentiated (or poorly differentiated) granulosa cells at an early (penultimate) stage of follicular development.

For the last few decades, much research has been tried to improve crop’s characteristics such as crop yield, quality, seeding period and environmental adaptability. In this paper, the effect of nanobubbles on the germination rate of barley seed is experimentally investigated. The air nanobubble was generated in water by gas-liquid mixing method. The results were shown that the mean diameter and concentration of nanobubble fabricated in DI water are 133 ㎚ and 8.59✕108 particles/㎖, respectively. Also, the seed germination rate for the nanobubble water was approximately 40 % higher than that of pure water.

Arsenic is a toxic metalloid that exists ubiquitously in the environment, and affects global health problems due to its carcinogenicity. In most populations, the main source of arsenic exposure is the drinking water. In drinking water, chronic exposure to arsenic is associated with increased risks of various cancers including those of skin, lung, bladder, and liver, as well as numerous other non-cancer diseases including gastrointestinal and cardiovascular diseases, diabetes, and neurologic and cognitive problems. Recent emerging evidences suggest that arsenic exposure affects the reproductive and developmental toxicity. Prenatal exposure to inorganic arsenic causes adverse pregnancy outcomes and children’s health problems. Some epidemiological studies have reported that arsenic exposure induces premature delivery, spontaneous abortion, and stillbirth. In animal studies, inorganic arsenic also causes fetal malformation, growth retardation, and fetal death. These toxic effects depend on dose, route and gestation periods of arsenic exposure. In males, inorganic arsenic causes reproductive dysfunctions including reductions of the testis weights, accessory sex organs weights, and epididymal sperm counts. In addition, inorganic arsenic exposure also induces alterations of spermatogenesis, reductions of testosterone and gonadotrophins, and disruptions of steroidogenesis. However, the reproductive and developmental problems following arsenic exposure are poorly understood, and the molecular mechanism of arsenic-induced reproductive toxicity remains unclear. Thus, we further investigated several possible mechanisms underlying arsenic-induced reproductive toxicity.

Low temperature is a major abiotic stress that adversely affects rice production in rice cultivation regions of the world. Low temperature during the rice growing season, can inhibit growth and development at any development stage, from germination to grain filling. Among the rice growth stage, reproductive stage was known as the most sensitive to low temperature, causing sterile grain and lead yield loss. However, low temperature during the grain filling stage also, may cause delay and incomplete grain maturation. In this study QTL analysis were performed to identify the QTLs associated with percent of grain filling under low temperature condition during the grain filling stage. A 139 RIL derived from a cross between ‘Milyang23’ (Tong-il, cold susceptible) and ‘Gihobyeo’(Japonica, cold tolerance) were exposed to air and water of 17℃ at the same time for 14 days during the grain filling stage. One significant QTL associated to percent of grain filling was detected on chromosome 7. This QTL could explain 14.7% of the phenotypic variance for percent of grain filling. We have the plan to confirm the detected QTL through further study.