An austenitic stainless steel canister functions as a containment barrier for spent nuclear fuel and radioactive materials. The canister on the spent fuel storage system near the coastal area has several welding lines in the wall and lid, which have high residual tensile stresses after welding procedure. Interaction between austenitic stainless steel and chloride environment from a sea forms a detrimental condition causing chloride induced stress corrosion cracking (CISCC) in the canister. The South Korea is concerned with the dry storage of high-level spent nuclear fuel and radioactive wastes to be built on the site of a nuclear power plant. The importance of aging management has recently emerged for mitigating CISCC of dry storage canisters. When a corrosive pit is created by a localized corrosion in a sea water atmosphere, it initiates and grows as CISCC crack. Surface stress improvement works by inducing plastic strain which results in elastic relaxation that generates residual compressive stress. Surface stress improvement methods such as roller burnishing process can effectively mitigate the potential for CISCC of the canister external surfaces. The generation of compressive stress layer can inhibit the transition to cracking initiation. In this study, a flat roller burnishing process was applied as a prevention technology to CISCC of stainless steel canisters. Roller burnishing process parameters have been selected for 1:3 scale canister model having a diameter of 600 mm, a length of 1,000 mm and a thickness of 10 mm on the basis of the burnishing conditions available to control residual tensile stress of austenitic stainless steel plate specimens. The surface roughness of the scaled canister model was investigated using a surface roughness measurement equipment after roller burnishing treatment. The surface residual stresses of the scaled canister model were measured by a hole drilling contour method attached with strain gauge. The burnishing test results showed that the surface roughness of the scaled canister model was considerably improved with flat rollers having the tip width of 4 mm. The surface of the scaled canister model had significant residual compressive stress after burnishing treatment. The roller burnished canister with good surface roughness could reduce the number of crack initiation sites and the residual compressive stress formed on the welded surface might prevent the crack initiation by reducing tensile residual stress in the weld zone, finally leads to CISCC resistance.

The spent fuel storage canister is generally made of austenitic stainless-steel and has the role of an important barrier to encapsulate spent fuels and radioactive materials. Canister near coastal area has welding lines, which have high residual tensile stresses after welding process. Interaction between austenitic stainless steel and chloride environment forms detrimental condition causing chloride induced stress corrosion cracking (CISCC) in canister. Reducing or eliminating tensile stress on canister can significantly decrease probability of crack initiation. Surface stress improvement works by inducing plastic strain which results in elastic relaxation that generates compressive stresses. Surface stress improvement methods such as burnishing process can effectively prevent for CISCC of canister surfaces. In this study, burnishing treatment has been evaluated to control residual tensile stress practically applicable to atmospheric CISCC for aging management of steel canisters. Burnishing process was selected as a prevention technology to CISCC of stainless steel canisters to improve resistance of CISCC through enhancement of surface roughness and generation of compressive residual stress. SUS 316 SAW (Submerged Arc Welding) specimens were burnished with flat roller and round roller after manufactured and assembled on CNC machine using base plate. The burnishing test results showed that the surface roughness of SUS 316 SAW welded specimens after roller burnishing of pass No. 5 was improved with 85% with flat roller and 93% with round roller, individually. Surface roughness showed the best state when burnished at pressure of 115 kgf, feeding rate of 40 m/stroke and pass No. of 5 turns with round roller. The surface of SUS 316 SAW welded specimens had much high residual compressive stress than yield stress of SUS 316 materials with roller burnishing treatment, independently of kinds of roller. The surface of the welded specimen by round roller burnishing showed smaller compressive stress and deeper stress region than in the surface of flat round roller burnishing. The roller burnished canister with good surface roughness could reduce the number of crack initiation sites and the high residual compressive stress formed on the welded surface might prevent the crack initiation by reducing or eliminating tensile residual stress in the weld zone, finally leads to excellent CISCC resistance. The crack growth behavior of SUS 316 welded specimens will need to investigate to evaluate the corrosion integrity of the canister materials under chloride atmosphere according to burnishing treatment.

The spent fuel dry storage canister is generally made of austenitic stainless-steel and has the role of an important barrier to encapsulate spent fuels and radioactive materials. The canister on the dry storage system has several welding lines in the wall and lid, which have high residual tensile stresses after welding procedure. Interaction between stainless steel and chloride environment from a sea results in an aged-related degradation phenomenon causing chloride induced stress corrosion cracking (CISCC) in the dry storage system. A pending issue to the interim storage of spent fuel awaiting repository disposal is their susceptibility to CISCC of stainless steel canisters. The available mitigation technology should be studied sufficiently to prevent the degradation phenomenon. This paper assesses stress-based mitigation to control residual tensile stress practically applicable to the atmospheric CISCC for the aging management of the stainless steel canisters. There are major components, that is, elevated tensile stress, susceptible material and corrosive environment that must be simultaneously present for CISCC degradation to occur. Surface stress improvement can effectively mitigate the potential for CISCC of the canister external surfaces. The potential deleterious effect of the additional work is negated by the presence of compressive residual stress, which removes the tensile stress needed for CISCC to occur. Surface stress improvement methods such as shock-based peening, shot peening and low plasticity burnishing can be applied for surface stress improvement of the canisters. Stress relaxation processes and advanced welding methods such as laser beam welding and friction stir welding can be also available to mitigate the susceptibility to CISCC. As the result assessing the stress-based mitigation technologies, promising candidate methods could be selected to reduce the residual tensile stresses and to control an aged-related degradation condition causing CISCC in the spent fuel dry storage canister.

Three known triterpenoids were isolated from MeOH extract of C. apiifolia (Ranunculaceae). Their structures were identified as oleanolic acid (1), ursolic acid (2), hederagenic acid (3) by comparison of their physicochemical and spectral data with the literature values. Among them, 2 was isolated for the first time from this plant. The isolated compounds were evaluated for their cytotoxicity against L1210, HL-60, SK-OV-3 tumor cell lines. All compounds 1-3 were shown good activities with IC50 values ranging from 7.7 to 25.6 μg/ml. This result suggests that triterpenoids 1-3 are main cytotoxic principles of this plant.

Phytochemical study on the EtOAc fraction from the MeOH extract of the leaves of Cedrela sinensis led to the isolation of five known phenolic compounds (1-5), whose structures were identified as (+)-catechin (1), kaempferol-3-0-α- L-rhamnopyranoside (2), quercetin (3), quercetin-3-O-α-L-rhamnopyranoside (4), and quercetin-3-O-β-D-glucopyranoside (5), respectively, by comparing their spectral (uv, JR, IH and 13C-NMR, and ESI-MS) and physicochemical data with those reported in the literature. Among the isolated compounds (1-5), compounds 1 and 3-5 exhibited significant DPPH radical scavenging effects with IC50 values ranging from 21.3±1.4 to 38.1±3.2 μM as well as superoxide anion radical scavenging effects with IC50 values ranging from 9.4±0.7 to 21.2±3.6 μM. Furthermore, compounds 1 and 3-5 also exhibited considerable inhibitory effects on LDL peroxidation induced by either CU2+ or AAPH with IC50 values ranging from 1.4±0.4 to 11.9±1.4 μM. These results indicated that flavonoids are the major constituents of C. sinensis and considered to be antioxidant principles of this plant.

As a result of cytotoxic compounds against cancer cell lines from natural sources, senven compounds were isolated from the leaf and twig of Acer okamotoanum Nakai. The compounds (1-7) were identified as ethyl gallate (1), methyl gallate (2), gallic acid (3), trans resveratrol-3-O-β-D-glucopyranoside (4), acertannin (5), nikoenoside (6), and fraxin (7) by physicochemical and spectroscopic data (including mp, UV, IR, MS, 1H-NMR, 13C-NMR, DEPT, and HMBC) in comparison with those of published papers. All the compounds were tested for their cytotoxic activity against L1210, HL-60, K562, and B16F10 cancer cell lines in vitro by MTT assay method. Compounds 1-3 and 5 showed cytotoxic activity against all tested cell lines with IC50 values ranged from 12.5 to 72.2 μM. Of the compounds, methyl gallate (2) exhibited the most potent cytotoxic activity against L1210, HL-60, K562, and B16F10 tumor cells with IC50 values of 12.5, 48.3, 22.8, and 22.8 μM, respectively. Other compounds did not show any cytotoxic activity against four cancer cell lines.

The antioxidant effect of methanol extract (ME) and water extract (WE) from Clematis trichotoma was evaluated as primary study to scavenge stable 1,1-diphenyl-2-picrylhydrazyl radicals (DPPH), inhibited iron-induce lipid peroxidation in linoleic acid emulsion, peroxidation of liposome induced by Fe3+/H2O2/ascorbie acid, and on Fe2+/H2O2 induced the mitochondrial lipid peroxidation. In secondary study, five flavonoids as luteolin (1), quercetin (2), apigenin (3), hirsutrin (4), kaempferol-3-O-glucoside were isolated (5). Among them, compounds 1 and 2 showed good activities in all the model systems. Compound 3 exhibited moderate antioxidant activities in both radical scavenging and these lipid peroxidation systems tested. Compound 4 showed significant inhibitions in liposome peroxidation and compound 5 displayed weak inhibition in all four tested systems. All the results presented herein indicate that products of C. trichotoma maybe useful in inhibiting membrane lipid peroxidation and preventing free radical-linked diseases.

Sanguisorbae radix (SR) from Sanguisorba officinalis L. (Losaceae) is widely used in Korea and China due to its various pharmacological activity. The present study aims to investigate the effect of the methanol extract of SR on amyloid β Protein(25-35) (Aβ (25-35)), a synthetic 25-35 amyloid peptide, -induced neurotoxicity using cultured rat cortical neurons. SR, over a concentration range of 10-50 μg/ml, inhibited the Aβ (25-35) (10 μM)-induced neuronal cell death, as assessed by a 3-[4,5-dimethylthiazole-2-yl]-2,5-diphenyl-tetrazolium bromide (MTT) assay and the number of apoptotic nuclei, evidenced by Hoechst 33342 staining. Pretreatment of SR (50 μg/ml) inhibited 10 μM Aβ (25-35)-induced elevation of cytosolic calcium concentration ([Ca2+]c), which was measured by a fluorescent dye, fluo-4 AM. SR (10 and 50 μg/ml) inhibited glutamate release into medium induced by 10 μM Aβ(25-35), which was measured by HPLC, and generation of reactive oxygen species. These results suggest that SR prevents Aβ (25-35)-induced neuronal cell damage in vitro.

Phytochemical study on the EtOAc fraction from a MeOH extract of the leaves of Alnus hirsuta Rupr. led to the isolation of nine compounds betulin (1), betulinic acid (2), hirsutanonol (3), hirsutenone (4), quercetin (5), avicularin (6), gallic acid (7), hyperin (8), and daucosterol (9). Among them, six compounds 1, 2, 57, and 9 are report from this plant for the first time. All isolated compounds were evaluated for their antioxidant activity using DPPH radical scavenging capacity and inhibition effect on mitochondrial lipid peroxidation. Six phenolic compounds 3-8 were found to have potent antioxidant activity. Of which, compounds 3, 4 and 5 showed significant free radical scavenging activity with the IC50 values of 18.3 ± 2.5, 15.7 ± 3.8 and 23.5 ± 3.1 μm, respectively. In addition, the compounds 3-8 exhibited inhibition effect on the mitochondrial lipid peroxidation with the IC50 values of 88.0 ± 6.5, 12.6 ± 1.2, 8.0 ± 1.1, 58.5 ± 4.3, 173.6 ± 15.2, and 75.0 ± 6.7 μm, respectively.

Five known anthraquinones, physcion (1), I-O-methylemodin (2), emodin (3), physcion-8-O-β,-D-glucopyranoside (5), emodin-8-O-β,-D-glucopyranoside (6) and two known stilbenes, trans-resveratrol (4), trans-resveratrol-3-O-β,-D-glucopyranoside (7) were isolated from MeOH extract of Reynoutria sachalinensis (Polygonaceae). All structures were unambiguously established by 1D and 2D NMR and MS data and the compounds were evaluated for their cytotoxicity against L1210, HL-60, BI6F10 tumor cell lines in MTT assay. Among the compounds, trans-resveratrol (4) exhibited significant cytotoxic activity with IC50 values of 9.2, 6.7 and 9.8 μg/ml, against the test cell lines respectively, but compounds 1-3 exhibited the moderate cytotoxic activity.

Five coumarins, psoralen (1), scopoletin (2), isoimperatorin (4), (+)-marmesin (5) and xanthotoxin (6), three chromones, cimifugin (3), hamaudol (7) and sec-O-glucosylhamaudol (10), one sterol, daucosterol (8) and one aliphatic alcohol, galactitol (9) were isolated from the root of Peucedanum japonicum. Their chemical structures were identified by the physicochemical and spectroscopic data by comparing literature values. Among them, compounds 9 and 10 were isolated for the first time from this plant. The anti-inflammatory effects of isolated compounds were examined on cyclooxygenase (COX), compounds 1, 2 and 7 showed inhibitory activity on COX-1 with IC50 values of 0.88, 0.27 and 0.30 mM, respectively. In the test for COX-2 activity, only compound 7 showed significant inhibitory activity with the IC50 value of 0.57 mM. The other compounds exhibited weak inhibitory or no inhibitory activity.