Hydride analysis is required to assess the mechanical integrity of spent nuclear fuel cladding. Image segmentation, which is a hydride analysis method, is a technique that can analyze the orientation and distribution of hydrides in cladding images of spent nuclear fuels. However, the segmentation results varied according to the image preprocessing. Inaccurate segmentation results can make hydride difficult to analyze. This study aims to analyze the segmentation performance of the Otsu algorithm according to the morphological operations of cladding images. Morphological operations were applied to four different cladding images, and segmentation performance was quantitatively compared using a histogram, betweenclass variance, and radial hydride fraction. As a result, this study found that morphological operations can induce errors in cladding images and that appropriate combinations of morphological operations can maximize segmentation performance. This study emphasizes the importance of image preprocessing methods, suggesting that they can enhance the accuracy of hydride analysis. These findings are expected to contribute to the advancements in integrity assessment of spent nuclear fuel cladding.

The Yeongsan River is a prominent inland waterway, alongside the Han River, Nakdong River, and Geum River in South Korea. Numerous bacterial strains were isolated from the Yeongsan River basin for a comprehensive investigation into indigenous prokaryotic species conducted between 2020 and 2023. These bacterial strains were identified using 16S rRNA gene sequencing, wherein 45 bacterial strains shared >98.7% sequence similarities with bacterial species not recorded in Korea thus far. Therefore, this study aimed to catalogue aforementioned unrecorded species and characterize them contingent upon their Gram nature, colony and cell morphologies, biochemical properties, and phylogenetic positions. These bacterial species were determined to be phylogenetically diverse. They were categorized into nine classes, 18 orders, and 25 families. These previously unrecorded species were classified into the following genera and classes: Chitinophaga (class Chitinophagia); Flavobacterium (class Flavobacteriia); Rhodopseudomonas, Gemmobacter, Paracoccus, Azospirillum, Sphingomonas, Novosphingobium, Sphingorhabdus, and Erythrobacter (class Alphaproteobacteria); Bordetella, Pararobbsia, Polynucleobacter, Rhodoferax, Aquabacterium, Malikia, Comamonas, Ideonella, Paucibacter, Undibacterium, Cupriavidus, and Thauera (class Betaproteobacteria); Pectobacterium, Arenimonas, Lysobacter, and Luteimonas (class Gammaproteobacteria); Luteolibacter (class Verrucomicrobiia); Mycolicibacterium, Angustibacter, Ornithinibacter, Janibacter, Schumannella, Aurantimicrobium, Luedemannella, Nocardioides, and Propionicimonas (class Actinomycetes); Geothrix (class Holophagae); and Lactococcus (class Bacilli).

High-entropy alloys (HEAs) have been reported to have better properties than conventional materials; however, they are more expensive due to the high cost of their main components. Therefore, research is needed to reduce manufacturing costs. In this study, CoCrFeMnNi HEAs were prepared using metal injection molding (MIM), which is a powder metallurgy process that involves less material waste than machining process. Although the MIM-processed samples were in the face-centered cubic (FCC) phase, porosity remained after sintering at 1200°C, 1250°C, and 1275°C. In this study, the hot isostatic pressing (HIP) process, which considers both temperature (1150°C) and pressure (150 MPa), was adopted to improve the quality of the MIM samples. Although the hardness of the HIP-treated samples decreased slightly and the Mn composition was significantly reduced, the process effectively eliminated many pores that remained after the 1275°C MIM process. The HIP process can improve the quality of the alloy.

In this study, we introduce a novel TiN/Ag embedded TiO2/FTO resistive random-access memory (RRAM) device. This distinctive device was fabricated using an environmentally sustainable, solution-based thin film manufacturing process. Utilizing the peroxo titanium complex (PTC) method, we successfully incorporated Ag precursors into the device architecture, markedly enhancing its performance. This innovative approach effectively mitigates the random filament formation typically observed in RRAM devices, and leverages the seed effect to guide filament growth. As a result, the device demonstrates switching behavior at substantially reduced voltage and current levels, heralding a new era of low-power RRAM operation. The changes occurring within the insulator depending on Ag contents were confirmed by X-ray photoelectron spectroscopy (XPS) analysis. Additionally, we confirmed the correlation between Ag and oxygen vacancies (Vo). The current-voltage (I-V ) curves obtained suggest that as the Ag content increases there is a change in the operating mechanism, from the space charge limited conduction (SCLC) model to ionic conduction mechanism. We propose a new filament model based on changes in filament configuration and the change in conduction mechanisms. Further, we propose a novel filament model that encapsulates this shift in conduction behavior. This model illustrates how introducing Ag alters the filament configuration within the device, leading to a more efficient and controlled resistive switching process.

해사영어는 선박 운항, 해양 안전, 선내 의사소통 및 선외 교신을 위해 설계된 특수한 영어 언어체계이다. 국제해사기구 STCW(선원의 훈련, 자격증명 및 당직근무의 기준에 관한 국제협약)에 따르면 국제항해에 종사하는 항해사가 되기 위해서는 SMCP를 포함한 해사영어 대한 충분한 이해가 수반되어야 한다. 본 연구는 음성인식, 번역, 단어 기입 등 유형의 해사영어시험을 통하여 학생들 의 해사영어 활용 능력을 측정하고 플랫폼 사용에 따른 시험 점수 향상 정도, 나아가 초임항해사로 나가기 위하여 요구되는 해사영어 시험 플랫폼 활용 시간 등을 조사하고자 하였다. 실험은 먼저 초기 시험을 통해 학생들의 일반영어능력과 SMCP 활용 능력에 대한 연 관성을 조사한 후, 중간 시험 및 최종 시험을 통해 플랫폼 활용에 대한 점수 향상 정도, 응시시간 변화 등 요인을 측정하였다. 초기 시 험을 통해 개인 요인(예: 토익 점수, 본인 스스로에 대한 영어능력 평가)에 따른 그룹 간 해사영어시험 점수에 유의한 차이가 있음을 확인하였으며, 중간시험 및 최종시험을 통해 플랫폼 활용이 유의한 시험점수 향상으로 이어졌음을 확인하였다. 해당 연구는 해사 교육 분야에 다양하게 적용할 수 있는 학습 플랫폼 활용 효능을 조사하였으며 향후 해사영어 교육 외 그 범위를 넓혀 활용될 수 있을 것으 로 사료된다.

High-entropy alloys (HEAs) are attracting attention because of their excellent properties and functions; however, they are relatively expensive compared with commercial alloys. Therefore, various efforts have been made to reduce the cost of raw materials. In this study, MIM is attempted using coarse equiatomic CoCrFeMnNi HEA powders. The mixing ratio (powder:binder) for HEA feedstock preparation is explored using torque rheometer. The block-shaped green parts are fabricated through a metal injection molding process using feedstock. The thermal debinding conditions are explored by thermogravimetric analysis, and solvent and thermal debinding are performed. It is densified under various sintering conditions considering the melting point of the HEA. The final product, which contains a small amount of non-FCC phase, is manufactured at a sintering temperature of 1250oC.

소나무재선충병의 나무주사는 살선충제를 중심으로 실시되어 왔으며, 매개충인 솔수염하늘소와 북방수염하늘소의 방제는 주로 항공방제나 지상방제를 통하여 이루어졌다. 본 연구에서는 나무주사를 통하여 매개충 (솔수염하늘소)을 방제하기 위한 연구로 Abamectin+Acetamiprid ME, Thiamethoxam DC 약제의 나무주사시 솔수염하늘소의 약효발현농도, 처리 후 기간별 효과(2017년~2018년)를 검토하였다. 실내 발현농도 시험에서는 Acetamiprid, Thiamethoxam LC50 value는 각각 0.102ppm, 0.083ppm 으로 나타 났으며, 야산(포장)에서 Abamectin+Acetamiprid ME, Thiamethoxam DC 처리구의 100.0% 치사 소요일 수는 처리 90일 후 11.0일, 9.4일, 처리 360일 후 11.6일, 10.0일로 나타나서 두 약제 모두 3월 처리시 다음해에 발생하는 매개충 (솔수염하늘소) 방제까지 가능함을 확인 할 수 있었다.

In recent years, pavement distresses have been caused by diverse factors such as spalling, deterioration of repaired sections, blow-up, and alkali aggregate reaction due to changing climate environment of a concrete pavement and its construction and maintenance conditions (supply of materials, increase in use of de-icers, etc,). As a leading repair method for deteriorated concrete pavements, partial-depth repair is implemented in accordance with guidelines of material properties for joints of a concrete pavement and field application evaluation systems, but still some of the repaired sections become deteriorated again at an early stage due to poor construction quality and failure of response to environmental impacts. Distresses that can be corrected with partial-depth repairs are largely divided into those of repair materials and of the existing pavement bonded to repair materials, and combined distress of repair materials and the existing pavement. Although re-repair methods should be different by distress type and scale than conventional pavement repair methods, appropriate repair methods and guidance for re-repairs have not been in place so far, and therefore currently, re-repair practices follow the existing manual of partial depth repairs. Therefore, this study evaluated concrete bond characteristics by removing method and repair scope for an experimental section of frequently distressed pavements to determine a re-repair scope and method for deteriorated partial depth repair sections of concrete pavement, the number of which has increased over time.