The domestic Pressurized Heavy Water Reactor (PWHR) nuclear power plant, Wolsong Unit 1, was permanently shut down on December 24, 2019. However, research on decommissioning has mainly focused on Pressurized Water Reactors (PWRs), with a notable absence of both domestic and international experience in the decommissioning of PHWRs. If proper business management such as radiation safety and waste is not performed, it can lead to increased business risks and costs in decommissioning. Therefore, the assessment of waste volume and cost, which provide fundamental data for the nuclear decommissioning process, is a crucial technical requirement before initiating the actual decommissioning of Wolsong Unit 1. Decommissioning radiation-contaminated structures and facilities presents significant challenges due to high radiation levels, making it difficult for workers to access these areas. Therefore, technology development should precede decommissioning process assessments and safety evaluations, facilitating the derivation of optimal decommissioning procedures and ensuring worker safety while enhancing the efficiency of decommissioning operations. In this study, we have developed a program to estimate decommissioning waste amounts for PHWRs, building upon prior research on PWR decommissioning projects while accounting for the specific design characteristics of PHWRs. To evaluate the amount of radioactive waste generated during decommissioning, we considered the characteristics of radioactive waste, disposal methods, packaging container specifications, and the criteria for the transfer of radioactive waste to disposal operators. Based on the derived algorithm, we conducted a detailed design and implemented the program. The proposed program is based on 3D modeling of the decommissioning components and the calculation of the Work Difficulty Factor (WDF), which is used to determine the time weighting factors for each task. Program users can select the cutting and packaging conditions for decommissioning components, estimate waste amount based on the chosen decommissioning method, and calculate costs using time weighting factors. It can be applied not only to PHWRs, but also to PWRs and non-nuclear fields, providing a flexible tool for optimizing decommissioning process.

Reliable evaluation of radioactivity inventory for the nuclear power plant components and residual materials is very important for decontamination and decommissioning. This can make it possible to define optimum dismantling approaches, to determine radioactive waste management strategies, and to estimate the project costs reasonably. To calculate radioactivity of the nuclear power plant structure, various information such as interest nuclide, cross-section, decay constant, irradiation time, neutron flux, and so on is required. Especially irradiation time and neutron flux level are very changeable due to cycle specific fuel loading pattern, the plant overhaul, cycle length. However most of the radioactivity calculations have generally been performed assuming one representative or average neutron flux during the lifetime of the nuclear power plant. This assumption may include excessive conservatism because the radioactivity level has the characteristics of saturation and decay. Therefore, considering these variables as realistically as possible could prevent overestimation. In order to perform realistic radioactivity calculation, we developed monthly relative power contribution factor applying plant-specific operation history and cycle-specific neutron flux. The factors were applied to the radioactivity calculation. The calculation results ware compared with measured values of the neutron monitors that were actually installed and withdrawn from the nuclear power plant. As a result of the comparisons, there are good agreements between the calculated values and measured values. These accurate calculation results of radioactivity could contribute to the establishment of radioactive waste dismantling strategies, the classification of radioactive waste, and the deposit of disposal costs for safe and reasonable decommissioning of the nuclear power plant.

With the aging of nuclear power plants (NPPs) in 37 countries around the world, 207 out of 437 NPPs have been permanently shutdown as of August 2022 according to the IAEA. In Korea, the decommissioning of NPPs is emerging as a challenge due to the permanent shutdown of Kori Unit 1 and Wolsong Unit 1. However, there are no cases of decommissioning activities for Heavy Water Reactor (HWR) such as Wolsong Unit 1 although most of the decommissioning technologies for Light Water Reactor (LWR) such as Kori Unit 1 have been developed and there are cases of overseas decommissioning activities. This study shows the development of a decommissioning waste amount/cost/process linkage program for decommissioning Pressurized Heavy Water Reactor (PHWR), i.e. CANDU NPPs. The proposed program is an integrated management program that can derive optimal processes from an economic and safety perspective when decommissioning PHWR based on 3D modeling of the structures and digital mock-up system that links the characteristic data of PHWR, equipment and construction methods. This program can be used to simulate the nuclear decommissioning activities in a virtual space in three dimensions, and to evaluate the decommissioning operation characteristics, waste amount, cost, and exposure dose to worker. In order to verify the results, our methods for calculating optimal decommissioning quantity, which are closely related to radiological impact on workers and cost reduction during decommissioning, were compared with the methods of the foreign specialized institution (NAGRA). The optimal decommissioning quantity can be calculated by classifying the radioactivity level through MCNP modeling of waste, investigating domestic disposal containers, and selecting cutting sizes, so that costs can be reduced according to the final disposal waste reduction. As the target waste to be decommissioning for comparative study with NAGRA, the calandria in PHWR was modeled using MCNP. For packaging waste container, NAGRA selected three (P2A, P3, MOSAIK), and we selected two (P2A, P3) and compared them. It is intended to develop an integrated management program to derive the optimal process for decommissioning PHWR by linking the optimal decommissioning quantity calculation methodology with the detailed studies on exposure dose to worker, decommissioning order, difficulty of work, and cost evaluation. As a result, it is considered that it can be used not only for PHWR but also for other types of NPPs decommissioning in the future to derive optimal results such as worker safety and cost reduction.

According to Article 4 and 5 of the Nuclear Safety and Security Commission (NSSC) Notice No. 2020-6, radioactive waste packages should be classified by radioactive levels, and finally permanently shipped to underground or surface disposal facilities. The level of the radioactive waste package is determined based on the concentrations of the radionuclides suggested in Article 8 of NSSC Notice No. 2021-26. Since most of the radionuclides in radioactive wastes are beta nuclides, chemical separation and quantification of the target nuclides are essential. Conventional methods to classify chemically non-volatile radionuclides such as Tc-99, Sr-90, Nb- 94, Fe-55 take a lot of time (about 5 days) and have low efficiency. An automated non-volatile nuclide analysis system based on the continuous chemical separation method of radionuclides has been developed to compensate for this disadvantages of the conventional method in this study. The features of the automated non-volatile nuclide separation system are as follows. First, the amount of secondary waste generated during the chemical separation process is very small. That is, by adopting an open-bed resin column method instead of a closed-bed resin column method, additional fittings and connector are unnecessary during the chemical separation. In addition, because the peristaltic pump is supplied for the sample and solution respectively, it is great effective to prevent cross-contamination between radioactive samples and the acid stock solution for analysis. Second, the factors that may affect results, such as solution amount, operating time and flow rate, are almost constant. By mechanically controlling the flow rate precisely, the operating time and additional factors required during the separation process can be adjusted and predicted in advance, and the uncertainty of the chemical separation process can be significantly reduced. Finally, it is highly usable not only in the continuous separation process but also in the individual separation process. It can be applied to the individual separation process because the user can set the individual sequence using the program. As a result of the performance evaluation of the automation system, recovery rates of about 80–90% and reproducibility within 5% were secured for all of the radionuclides. Furthermore, it was confirmed that the actual work time was reduced by more than 50% compared to the previous manual method. (It was confirmed that the operation time required during the separation process was reduced from 6 days to 3 days.) Based on these results, the automation system is expected to improve the safety of workers in radiation exposure, reduce human error, and improve data reliability.

Background: Chronic ankle instability is a common injury that decreases balance and negatively affects functional movements, such as jumping and landing. Objectives: To analyze the effect of taping types and jump heights on balance with eyes open and closed during jump landings in chronic ankle instability. Design: Within-subject design. Methods: The study involved 22 patients with chronic ankle instability. They performed both double-leg and single-leg drop jump landings using three conditions (elastic taping, non-elastic taping, and barefoot) on three different jump platforms (30, 38, and 46 cm). Balance was measured using the Romberg's test with eyes open and closed. Results: Interaction effect was not statistically significant. Balance with eyes open and closed was significantly improved in both the elastic taping and non-elastic taping conditions compared to the barefoot condition. There was no significant difference according to the jump height. Conclusion: Individuals with chronic ankle instability demonstrated increased balance ability with eyes open and closed when jump landing. Elastic taping and non-elastic taping on the ankle joint can positively affect balance during landing in individuals with chronic ankle instability.

Background: Effect of cervical and lumbar tractions on the reduction in the angle of curvature and the effect of a correction exercise or a general traction method on balance, muscle strength, pain, and body alignment, however insufficient research has been undertaken on self traction exercises targeting patients with scoliosis. Purpose: To determine the effect of cervical and lumbar tractions on the reduction in the angle of curvature and the effect of a correction exercise or a general traction method on balance, muscle strength, pain, and body alignment. Design: Randomized controlled clinical trial (single blinded) Methods: Twelve adults(20s) with scoliosis were included in this study and performed a traction program that was composed of a 5-min warm-up exercise, a 15-min main exercise, and a 5-min cool-down exercise (25 minutes in total), three times a week for four weeks. The Chiro traction machine was used for the self-traction exercise. Vertebral alignment, muscle strength, and flexibility were compared before and after the intervention using the paired T-test. Results: The scoliosis angle, pelvic torsion, and lumbar extensor were significantly changed by intervention; however, there was no significant difference in flexibility. Conclusion: The results revealed that self-traction exercise activated blood flow through the extension and contraction of muscles, effectively increasing the function of the muscles around the vertebrae.

The purpose of this study was to investigate the effect of heel off stairway walking exercise on the increase of muscle activity and balance activity of the ankle joint muscles in university students with functional ankle instability. The conservative treatment for the control group consisted of stairway walking (n=10) and the experimental group consisted of heel off stairway walking (n=11). The therapeutic intervention of the control and experimental groups was performed a total of 12 exercise sessions, 3 times per week for 4 weeks. To compare the two groups, the level of ankle disability was assessed by using the EMG, BT4 and Pedoscan in pre-treatment and post-treatment. Muscle activity increased in both the experimental groups and control groups in each group, however there was no significant difference between the groups. Balance ability did not show any significant difference. This study demonstrates that heel-off stairway walking is effective in significantly increasing muscle activity, however did not significantly improve balance ability.

Flexible transparent conducting films (TCFs) were fabricated by dip-coating single-wall carbon nanotubes (SWCNTs) onto a flexible polyethylene terephthalate (PET) film. The amount of coated SWCNTs was controlled simply by dipping number. Because the performance of SWCNT-based TCFs is influenced by both electrical conductance and optical transmittance, we evaluated the film performance by introducing a film property factor using both the number of interconnected SWCNT bundles at intersection points, and the coverage of SWCNTs on the PET substrate, in field emission scanning electron microscopic images. The microscopic film property factor was in an excellent agreement with the macroscopic one determined from electrical conductance and optical transmittance measurements, especially for a small number of dippings. Therefore, the most crucial factor governing the performance of the SWCNT-based TCFs is a SWCNT-network structure with a large number of intersection points for a minimum amount of deposited SWCNTs.

As a part of a study on insect food, the nutritional and harmful components in the mealworm (Tenebrio molitor) were analyzed. In addition, due to a recent introduction of live Chinese mealworm in the Korea market, those components between the Korean and Chinese mealworms were compared. Analysis of the composition of the general components (moisture, crude protein, crude fat, crude ash, crude fiber, and carbohydrates) showed that abundant crude protein (50.32– 52.79%) was present in both Korean and Chinese mealworm powders, and the protein content in the Chinese mealworm powder was higher than that in the Korean mealworm powder by 2.67%. The amino acid compositions were similar, but the fatty acid composition differed with respect to each component in the Korean and Chinese mealworm powders. The unsaturated fatty acid contents were 76.80-80.55% of the total fatty acid content in the mealworms. The linoleic acid contents in the Korean and Chinese mealworms were 20.8±1.1% and 34.69±1.9%; the linolenic acid contents, 0.47% and 1.31%; and the oleic acid contents, 51.40±0.9% and 40.20±1.5%, respectively. With respect to harmful components such as heavy metals and bacteria that cause food poisoning, bacteria such as Escherichia coli O157:H7 and Salmonella spp. were not detected in both Korean and Chinese mealworms, and the mercury content was below the standard value for common food (Korea, 0.03 mg/kg; China, 0.08 mg/kg).

The purpose of this study is to analyze the grip strength by the girth of upper arm and forearm and their muscle activities by duration of grip strength. The subjects were consisted of 20 healthy adults(10 males & 10 females) who had no medical history of neurological and surgical problems with their arms. Girth of upper arm/ forearm and maximum grip strength for 4sec and 30sec were measured. Muscle activity was by wireless electrode EMG system. Co-relation of girth of upper arm/ forearm was significantly high. Upper arm's muscle activity performed for 4sec and 30sec was significantly high. In this study. It suggests that training of upper arm should be performed with the training of grip strength because both of upper arm and forearm affected grip strength.

Purpose: The purpose of this study was to estimate the effects of subliminal music with balance imagery training on balance and concentration. Methods: The participants were 45 seniors in an undergraduate school in Korea. The subliminal music with balance imagery training intervention was carried out for 20 minutes. Other interventions were also carried out for 20 minutes. 12 seniors(Group A) listened to subliminal music with balance imagery training, 12 seniors(Group B) listened to subliminal music, 11 seniors(Group C) received balance imagery training, and 10 seniors(Group D) had no intervention(Control group). The grid test is related to measured levels of concentration intensity. Romberg one legged standing test was carried out for 30 seconds. The collected data was analyzed by one-paired t test and one way ANOVA using the SPSS Windows 12 ver. program. Results: The major findings of this study were as follows: Concentration levels of Group A and C improved, and balance levels of Group C and D improved. There was a statistically significant decrease in concentration between Group A and B, Group A and C after intervention. Conclusion: These findings suggest that listening to subliminal music with balance imagery training may be useful in managing concentration in seniors. So it provides basic information for further concentration on improving education on music with balance imagery training.

A new commercial strain "Dan Bi" of Pleurotus eryngii was developed by intra-specific crossing between monokaryotic spores derived from KNR2312 and KNR2596, respectively. The optimum temperature of mycelial growth was 25℃ and that of fruiting body development was 15 -16℃. The primordia formation of "Dan Bi" was one day later than that of control strain KNR2312. The color of pileus and stipe surface was neutral-brown and pure white, respectively. The shape of pileus was dome and has a scale like as cobweb. The yield was 93±4.8g/850cc plastic bottle. Analysis of the genetic characteristics of the new commercial strain "Dan Bi" showed a different profile as that of the control strain KNR2312 when RAPD primer 8001, 8002, 8003, 8004, and 8005 were used. This new variety of King Oyster mushroom is characterized by a few primordia formation after scratching. It would be of much help to mushroom cultivators in a process of culling of P. eryngii.