This study developed conductive inks composed of carbon black (CB) and silver nanowires (Ag NWs) for cost-effective screen-printing on fabrics. The Ag NW density within the CB matrix was precisely controlled, achieving tunable electrical conductivity with minimal Ag NW usage. The resulting inks were successfully patterned into shapes such as square grids and circles on textile surfaces, demonstrating excellent conductivity and fidelity. Adding 19.9 wt% Ag NWs reduced sheet resistance by ~92% compared to CB-only inks, highlighting the effectiveness and potential of this hybrid approach for cost-effective, high-performance textile-based electronics. The one-dimensional morphology of Ag NWs facilitated the formation of conductive percolation networks, creating efficient electron pathways within the CB matrix even at low loadings. This work advances the field of CB-based conductive inks and provides a scalable and practical method for producing functional, patterned electronic textiles.

곤충호텔은 곤충이 서식할 수 있도록 인위적으로 만든 구조 물로서 정원이나 텃밭 등 다양한 곳에서 활용되고 있다. 하지만 식생유형, 재료, 설치 방식 등에 따른 곤충 유입 효과에 대한 검증은 부족하며, 국가 또는 지역에 따른 곤충의 종류와 생육환 경이 다름에도 불구하고 곤충호텔에 대한 국내 연구는 전무한 실정이다. 따라서 본 연구에서는 국립수목원을 대상으로 구체적 인 식생유형 및 재료에 따른 유입 곤충 특성을 확인하고, 국내 실정에 맞는 효과적인 곤충호텔 설치 및 관리방안에 대한 기준 을 제시하고자 하였다. 조사구는 세 가지 식생유형(초지, 침엽수 림, 활엽수림)으로 구분하였으며, 각 식생의 조사구에 두 가지 재료(참나무, 잣나무)를 활용한 곤충호텔을 설치하였다. 조사는 2년동안(2022~2023) 진행되었으며, 매년 4~9월까지 주 1회 씩(총 48회) 곤충호텔의 유입 곤충을 직접 채집하였다. 곤충호 텔에서 채집된 곤충은 총 9목 46과 129종 3,057개체로, 2022 년에는 7목 34과 85종 1,750개체, 2023년에는 8목 35과 77종 1,307개체가 출현하였다. 연도별로 비교하면 1차년도에 유입 된 곤충의 개체수가 2차년도 보다 약 1.3배 많았고, 재료의 부식 에 따른 곤충의 구성도 달라졌다. 식생유형에 따라 구분하면 기간에 상관없이 활엽수림에서 유입 곤충이 가장 많았고, 침엽 수림에서 가장 적었다. 또한 재료에 따른 구분에서는 참나무가 잣나무보다 유입 곤충이 많았다. 참나무의 경우 유입 곤충의 연도별 차이가 적은 반면, 잣나무는 1년차에 비해 2년차에 약 2.3배 줄었다. 상관분석과 계층적 군집분석을 통한 곤충의 유입 특성은 식생유형보다는 재료의 영향이 큰 것으로 확인되었고, 식생유형만 비교했을 경우 초지에 비해 활엽수림과 침엽수림의 유사성이 높았다. 결론적으로 생물 다양성 증진을 목적으로 곤 충호텔을 설치하고자 한다면 초지나 활엽수림에 참나무 재료를 사용하는 것이 유리하며, 잣나무 재료를 이용한다면 1년 주기로 재료 교체가 필요할 것으로 판단된다. 하지만 특정 재료를 선호 하는 곤충의 기주특이성이 확인되었기 때문에 다양한 종류의 재료를 같이 사용하는 것도 하나의 방법이라고 사료된다. 향후 이를 기반으로 전시원에서 실질적으로 활용할 수 있는 곤충호텔 모델 개발로 확대해 나갈 예정이다.

국립수목원 전시원의 지속가능하고 친환경적인 관리를 위하 여 유기물 멀칭재 처리에 대한 잡초 억제 효과를 조사하였다. 대표적 잡초인 쑥군락과 바랭이군락을 대상으로 고정방형구 (1×1㎡)를 3반복 설치하였다. 처리구의 유기물 멀칭재는 5가지 재료로 활엽수 우드칩, 침엽수 바크, 갈참나무 낙엽, 메타세쿼이 아 낙엽, 칠엽수 과피를 사용하였다. 멀칭재 중에서 갈참나무 낙엽, 활엽수 우드칩, 칠엽수 과피가 비교적 잡초 억제 효과가 높은 것으로 나타났다. 갈참나무 낙엽은 지중 온도를 낮게 유지 하는 효과가 상대적으로 좋았기 때문에 토양의 보습 효과가 뛰 어날 것으로 판단된다. 유기물 멀칭재 처리는 일년생식물의 발 생은 억제하고, 지중식물 및 반지중식물의 생육에 도움을 주는 효과가 있었다. 멀칭재의 무게보다 재료에 의한 빛 차단 면적이 잡초를 억제하는 주된 요인이었다. 본 연구 결과는 국립수목원 전시원에서 발생하는 부산물을 활용한 친환경적 관리 방안 수립 에 활용될 것이며, 향후 잡초의 발생 시기에 따른 멀칭 시기 및 유기물 멀칭재의 유지 관리에 대한 추가적인 연구가 필요하다.

Thyroid scanning using technetium-99m (99mTc) is the gold standard for diagnosing feline hyperthyroidism. In cats with an overactive thyroid, a thyroid scan is the most appropriate imaging technique to detect and localize any hyperfunctional adenomatous thyroid tissue. In this study, the pharmacological properties of the Technekitty injection (Tc-99m), developed as a diagnostic agent for feline hyperthyroidism using 99mTc as an active ingredient, were tested in FRTL-5 thyroid follicular cell line and ICR mice. The percentage of cell uptake of the Tc-99m in FRTL-5 thyroid cells was 0.182 ± 0.018%, which was about 6 times higher compared to Clone 9 hepatocytes. This uptake decreased by 38.2% due to competitive inhibition by iodine (sodium iodide). In tissue distribution tests by using ICR mice, the highest distribution was observed in the liver, kidneys, spleen, lungs, and femur at 0.083 hours after administration, and this distribution decreased as the compound was excreted through the kidneys, the primary excretory organ. Maximum distribution was confirmed at 1 hour in the small intestine, 6 hours in the large intestine, and 2 hours in the thyroid gland. Additionally, the total amount excreted through urine and feces over 48 hours (2 days) was 78.80% of the injected dose, with 37.70% (47.84% of the total excretion) excreted through urine and 41.10% (52.16% of the total excretion) through feces. In conclusion, the Tc-99m has the same mechanism of action, potency, absorption, distribution, metabolism, and excretion characteristics as 99mTc used for feline hyperthyroidism in the United States, Europe, and other countries, because the Technekitty injection (Tc-99m) contains 99mTc as its sole active ingredient. Based on these results, the Technekitty injection (Tc-99m) is expected to be safely used in the clinical diagnosis of feline hyperthyroidism.

Seeds of some barberry species have embryo with physiological dormancy that requires a cold stratification for germination. Berberis amurensis Rupr. is a native species of Japan, Korea, the Russian far east, and parts of China. This specific plant is important for its edible fruits and rhizomes with high medicine value. This study aimed to determine the effect of stratification on germination and physiological change of B. amurensis. Seeds were placed on sterilized sand medium moistened with distilled water in 9 cm diameter petri dishes and stored at 4 and 25˚C for 0, 15, 30, 45 and 60 days. Each treatment had 40 seeds per replica, and three repetitions per treatment. Immediately after stratification, total phenolics contents (TPC) was analyzed and seeds incubated at 15/6˚C for 12 weeks. Warm stratification had a significant effect on seed forcing for germination than cold stratification treatment. At 25˚C for 60 days, stratified seed showed highest germination percentage (25.7±4.3%) and germination started in 14 days of the stored period. Whereas TPC was significantly decreased with increasing stored period. Contrastively, cold stratification had no effect on the germination ability. In the same way germination percentage of non-stratified seeds were also zero. The results confirmed that B. amurensis seeds were in a dormant state and warm stratification increased the germination ability by breaking of dormancy.

본 연구는 영유아교사의 근무환경과 이직의도 관계를 알아보고 감정노동이 이 두 변수를 조절하는지 확인하는 데 목적이 있다. 연구를 위해 영유아교사 199명을 대상으로 빈도분석, 기술통계분석, 상관분석을 실시하였으며, 인구통계학적 주요변인의 차이검증을 위해 t-검증 (t-test) 및 일원분산분석(one-way ANOVA)을 실시하였다. 또한 감정노동 조절효과 검증을 위해 위계적 회귀분석과 단순기울기 분석을 적용하였다. 분석 결과, 근무환경의 하위 변인들은 감정노동의 내면적 행동에는 정적 상관관계를, 이직의도에는 부적 상관관계를 보여주었다. 영 유아 교사들의 감정노동은 표면적 행동과 내면적 행동에 정적 상관관계로 나타났으며 감정노 동의 표면적 행동은 이직의도와 정적 상관관계가 있는 것으로 나타났다. 낮은 물리적 환경과 대인관계에 기반 한 감정노동은 이직의도를 유도하지만 반면 감정노동은 근무환경과 이직의 도 간의 조절요인으로 작용하였다. 근무환경의 개선방안으로 영유아교사의 업무에 대한 코칭 개입 방법은 궁극적으로 이들의 이직의도를 낮추는 효과적인 방안일 수 있다. 즉 정서적인 지 지를 통해 스트레스적인 근무 환경을 정서 안정적이고 긍정적인 환경으로 변경하고, 물리적으 로 교재․교구비 지원, 근로시간 보장, 처우 개선을 통해 영유아 교사들의 근무환경에 대한 만족도를 높이는 것이 요구된다. 본 연구는 궁극적으로 코칭기법을 중심으로 교사 심리 상담 과 같은 정서적 지원프로그램을 제공하여 그들의 이직의도를 낮추는 방안을 제언한다.

본 연구는 국립수목원 내 전문전시원에 발생한 이입식물을 대상으로 2015년부터 2023년까지 이입식물 분포조사를 시행 하였다. 그 결과 자생식물 299종, 귀화식물 49종, 재배식물 13 종 총 63과 214속 361종이 조사되었다. 국화과가 63종으로 가장 많았고, 벼과, 사초과 순으로 발생하였다. 이입식물의 이입 경로를 분석하기 위하여 광릉숲에 분포하는 식물상과 비교 분석 한 결과 309종이 광릉숲에 분포하는 식물로 확인되었으며, 전 문전시원 내 식재 식물이 확산된 경우가 17종으로 조사되었다. 조사된 귀화식물 49종을 원산지별로 구분하면 유럽과 북아메리카가 69.4%, 이입 시기별 1기와 3기의 비율이 90%를 차지하였 다. 귀화식물의 귀화도 분포 등급을 적용한 결과 4등급 이상이 면서 이입 시기가 3기인 식물 9종은 빠르게 확산할 우려가 큰 식물이므로 지속적인 모니터링이 필요하다. 국립수목원에 어느 정도 귀화식물이 분포하는지를 가늠하는 도시화지수를 산출한 결과 15.0%로 나타났으며, 환경부 지정 생태계교란 야생식물 중 돼지풀, 단풍잎돼지풀, 애기수영, 미국쑥부쟁이가 출현하였 다. 이입식물은 자생식물군락과 전문전시원 내 관람로에 침입하 여 세력권을 확장하고 우점하는 경향이 있어 각각의 생태적 특 성을 고려한 제거 방법이 필요하다.

많은 연구에 따르면 Tenebrio molitor은 유충 단계에서 플라스틱을 섭취할 수 있다고 보고되었다. 이 연구의 목적은 T. molitor 유충의 성장과 발달에 발포폴리스티렌 섭취가 미치는 영향을 조사하는 것이다. 밀기울을 섭취한 유충의 성장률은 발포폴리스티렌을 섭취한 유충의 성장률보다 더 좋았고(p < 0.001) 발포폴리스티렌을 섭취한 유 충의 번데기로 전환되는 기간은 밀기울을 섭취한 유충의 번데기로 전환되는 기간보다 더 빨랐다(p < 0.001). 하지만 두 처리구간 생존율은 유의미한 차이가 없었다(p = 0.786). 이 결과에 따르면 발포폴리스티렌을 섭취한 유충은 체중 감소와 짧은 발육기간이 특징이지만 생존하는 것에는 문제가 없었다. 따라서 우리는 T. molitor가 플라스틱 폐기물 의 지속 가능하고 친환경적인 제거를 위한 주요 자원이라는 결론을 내렸다.

This study aimed to reconfirm the sex change scale and pattern of Tegillarca granosa. Although the sex ratio (female : male, female proportion) of T. granosa was 1:2.32 (30.2%) at the initial stage (2011) of the study, it was 1:0.94 (51.5%) after one year (2012) in the same population. The increase of the female proportion was greater in the 2+ year class (23.0%) when compared to the 1+ year class (19.2%). Overall, sex change ratio of 37.6% was observed in this population of T. granosa. The sex change ratio of the 2+ year class (39.3%) was higher than that of the 1+ year class (35.3%). And sex change ratio in the males (42.2%) was higher than that in the females (26.9%). The female proportion was the opposite of the result from 2006~2007, and one of the causes was presumed to be the difference in cumulative water temperature during the gonadal inactive stage (winter).

The baculovirus expression system (BES) utilize the p10 or polyhedrin promoter, a very late promoter that exhibits strong transcriptional activity primarily at the end of viral infection, to produce useful recombinant proteins. The burst sequence of the very late promoter is essential for strong transcription, and VLF-1 is a transcription factor that binds specifically to the burst sequence, and it has been reported that it can regulate the amount and timing of expression of protein by the very late promoter. Recently, a VLF-1 constitutively expressing cell line was constructed to increase the production of the target protein, but the effect was minimal. In this study, to find the optimal VLF-1 expression conditions to increase target protein production efficiency, we controlled the expression of VLF-1 through various promoters and evaluated the target protein expression efficiency by the p10 promoter accordingly.

Porous carbon nanofiber (CNF) electrodes for supercapacitors were prepared by using polyacrylonitrile (PAN) and cucurbituril (CB), which is a macrocyclic compound comprising glycoluril units containing hollow cores. Mixture of PAN and CB in dimethyl sulfoxide was electrospun, and thermally treated to produce CNF electrodes. Their thermal stability, surface morphology, carbon microstructures, and surface porosity were investigated. Electrochemical properties were measured using three-electrode with synthesized CNFs without further treatment as a working electrode and 1 M Na2SO4 as an electrolyte. CNFs derived from PAN and CB exhibited a high specific capacitance of 183.5 F g− 1 and an energy density of 25.4 Wh kg− 1 at 0.5 A g− 1 with stable cyclic stability during 1000 cycles, which is significantly higher than those for CNFs derived from PAN only. This demonstrated that the introduction of CB successfully improved the energy storage performance of CNF electrodes.

If radioactive plumes are released outside due to loss of containment building integrity during a nuclear power plant accident, these materials might travel with the wind, affecting both the surrounding environment and neighboring countries. In China, most nuclear power plants are located on the eastern coast. Consequently, a radioactive plume generated during an accident could negatively impact even the western part of the Korean Peninsula due to westerly winds. To detect such problems early, respond quickly, and protect residents, a system that can monitor aerial radiation under normal conditions is needed. Additionally, a detection system that can operate in real-time in an emergencies conditions is required. The current method for aerial radiation measurement takes environmental radiation data from a monitoring post 1.5 m above the ground and converts it to altitude. To measure actual aerial radiation, an expansive area is surveyed by aircraft. However, this approach is both time-consuming and expensive. Thus, to monitor radioactive plumes influenced by environmental factors like wind, we need a radiation detector that can gauge both radioactivity and directionality. In this study, we developed a radiation detector capable of assessing both the radioactivity and directionality of a radioactive plume and conducted its performance evaluation. We miniaturized the radiation detector using a CZT (Cadmium Zinc Telluride) sensor, enabling its mounting on unmanned aerial vehicles like drones. It is configured with multi-channels to measure directionality of a radioactive plumes. For performance evaluation, we positioned two-channel CZT sensors at 90 degrees and measured the energy spectrum for angle and distance using a disk-type radioactive isotope. Using this method, we compared and analyzed the directionality performance of the multi-channel radiation detector. We also confirmed its capability to discern specific radioactivity information and nuclide types in actual radioactive plumes. Our future research direction involves mounting the multi-channel radiation detector on a drone. We aim to gather actual aerial radiation data from sensors positioned in various directions.

The domestic Pressurized Heavy Water Reactor (PWHR) nuclear power plant, Wolsong Unit 1, was permanently shut down on December 24, 2019. However, research on decommissioning has mainly focused on Pressurized Water Reactors (PWRs), with a notable absence of both domestic and international experience in the decommissioning of PHWRs. If proper business management such as radiation safety and waste is not performed, it can lead to increased business risks and costs in decommissioning. Therefore, the assessment of waste volume and cost, which provide fundamental data for the nuclear decommissioning process, is a crucial technical requirement before initiating the actual decommissioning of Wolsong Unit 1. Decommissioning radiation-contaminated structures and facilities presents significant challenges due to high radiation levels, making it difficult for workers to access these areas. Therefore, technology development should precede decommissioning process assessments and safety evaluations, facilitating the derivation of optimal decommissioning procedures and ensuring worker safety while enhancing the efficiency of decommissioning operations. In this study, we have developed a program to estimate decommissioning waste amounts for PHWRs, building upon prior research on PWR decommissioning projects while accounting for the specific design characteristics of PHWRs. To evaluate the amount of radioactive waste generated during decommissioning, we considered the characteristics of radioactive waste, disposal methods, packaging container specifications, and the criteria for the transfer of radioactive waste to disposal operators. Based on the derived algorithm, we conducted a detailed design and implemented the program. The proposed program is based on 3D modeling of the decommissioning components and the calculation of the Work Difficulty Factor (WDF), which is used to determine the time weighting factors for each task. Program users can select the cutting and packaging conditions for decommissioning components, estimate waste amount based on the chosen decommissioning method, and calculate costs using time weighting factors. It can be applied not only to PHWRs, but also to PWRs and non-nuclear fields, providing a flexible tool for optimizing decommissioning process.

After the major radioactivation structures (RPV, Core, SG, etc.) due to neutron irradiation from the nuclear fuel in the reactor are permanently shut down, numerous nuclides that emit alpha-rays, beta-rays, gamma-rays, etc. exist within the radioactive structures. In this study, nuclides were selected to evaluate the source term for worker exposure management (external exposure) at the time of decommissioning. The selection of nuclides was derived by sequentially considering the four steps. In the first stage, the classification of isotopes of major nuclides generated from the radiation of fission products, neutron-radiated products, coolant-induced corrosion products, and other impurities was considered as a step to select evaluation nuclides in major primary system structures. As a second step, in order to select the major radionuclides to be considered at the time of decommissioning, it is necessary to select the nuclides considering their half-life. Considering this, nuclides that were less than 5 years after permanent suspension were excluded. As a third step, since the purpose of reducing worker exposure during decommissioning is significant, nuclides that emit gamma rays when decaying were selected. As a final step, it is a material made by radiation from the fuel rod of the reactor and is often a fission product found in the event of a Severe accident at a nuclear power plant, and is excluded from the nuclide for evaluation at the time of decommissioning is excluded. The final selected Co-60 is a nuclide that emits high-energy gamma rays and was classified as a major nuclide that affects the reduction of radiation exposure to decommissioning workers. In the future, based on the nuclide selection results derived from this study, we plan to study the evaluation of worker radiation exposure from crud to decommissioning workers by deriving evaluation results of crud and radioactive source terms within the reactor core.

Graphene-based sensors have emerged as significant tools for biosensing applications due to their unique electrical, mechanical, and thermal properties. In this study, we have developed an innovative and sensitive aptasensor based on the surfacemodified graphene for the detection of lung cancer biomarker CA125. The sensor leverages the combination of graphene surface and gold nanoparticles (AuNPs) electrodeposition to achieve a high level of sensitivity and selectivity for the biomarker detection. A noticeable decrease in electron transfer resistance was observed upon the AuNPs deposition, demonstrating the enhancement of electrochemical performance. Our experimental findings showed a strong linear relationship between the sensor response and CA125 concentrations, ranging from 0.2 to 15.0 ng/mL, with a detection limit of 0.085 ng/ mL. This study presents a novel approach to lung cancer detection, surpassing the traditional methods in terms of invasiveness, cost, and accuracy. The results from this work could pave the way for the development of graphene-based sensors in various other biosensing applications.