국내 현대정원의 조성 디자인 경향성을 확인하고자 우수 경 관 정원 80개소 대상으로 적용 양식 및 정원 식물을 조사하였 다. 조사 대상 80개소 정원 중 53.7%는 서울 및 수도권, 46.3%는 그 외 지역에 소재하고 있다. 또한, 관리 유형에 따 라 공동 정원, 상업시설 정원, 개인 정원으로 구분 되었으며, 각 62.5%, 21.3%, 16.2%로 나타났다. 19~20세기 해외 정원 사조에 따라 조성 양식은 12유형(정형식, 비정형식, 정형 및 비정형 복합식, 건축식, 자연, 신풍경, 뉴저먼 스타일, 모더니 즘, 프레리 스타일, 뉴웨이브 스타일, 낭만주의, 예술작품 정 원)으로 분류되었다. 우리나라 현대 정원은 단일 및 복합 양식 활용이 각 55.0%와 45.0%로 유사하였다. 주로 정형 및 비정 형 복합식 정원이 활용되는 반면, 정형 및 비정형 복합식 정원 대비 낭만주의, 모더니즘, 프레리 및 뉴웨이브 스타일 이용 빈 도는 0.02~0.06배 수준이었다. 조성 양식 활용에 따라 이용 되는 식물 소재 유형에는 큰 차이가 없었으나, 특정 디자인에 서 식재 빈도가 높은 분류군을 확인했다.

L-asparaginase (ASNase) is a therapeutic enzyme used to treat acute lymphoblastic leukemia. Currently, the most widely used ASNases are originated from bacteria. However, owing to the adverse effects of bacterial ASNases, new resources for ASNase production should be explored. Fungal enzymes are considered efficient and compatible resources of natural products for diverse applications. In particular, fungal species belonging to the genus Trichoderma are well-known producers of several commercial enzymes including cellulase, chitinase, and xylanase. However, enzyme production by marine-derived Trichoderma spp. remains to be elucidated. While screening for extracellular ASNase-producing fungi from marine environments, we found four strains showing extracellular ASNase activity. Based on the morphological and phylogenetic analyses using sequences of translation elongation factor 1-alpha (tef1α), the Trichoderma isolates were identified as T. afroharzianum, T. asperellem, T. citrinoviride, and Trichoderma sp. 1. All four strains showed different ASNase activities depending on the carbon sources. T. asperellem MABIK FU00000795 showed the highest ASNase value with lactose as a carbon source. Based on our findings, we propose that marine-derived Trichoderma spp. are potential candidates for novel ASNase production.

The objective of this experiment was to investigate the effect of drip irrigation volume on tomatoes (Solanum lycopersicum L.) grown in a greenhouse using perlite medium. Plants were treated by three different irrigation treatment I0, I25, and I50 (where irrigation volume of I25 and I50 was 25% and 50% higher than I0, having limited or no leaching). Growth characteristics of plants, yield and water use efficiency were measured. The result showed that plant height, leaf length and leaf width were lowest in the I0 treated plants. However, these parameters were not statistically significant differences between the plants that were grown in the I25 and I50 treatment. Soluble solids content, acidity and dry matter of 111th, 132nd, and 143rd days harvested tomato were higher in the plants irrigated with lowest volume (I0) than the higher volume (I25 or I50). In addition, water content was lower in the 111th and 132nd days of harvested tomatoes from the I0 treatment. The number of big-size tomatoes (>180 g) was significantly higher in the I25 irrigated plants. There was no significant difference in the total number of harvested fruits among the treatments. The average fruit weight and total yield of harvested tomatoes were lowest in the I0 treated plants. The water consumption of tomato was not significantly different amongst the treatments but water use efficiency was lowest in the I0 treatment. Principal component analysis revealed that total soluble solid and acidity of tomato showed a positive correlation between each other. These results suggest that I25 was the optimum irrigation treatment for tomato based on its measured growth characteristics, yield and water use efficiency.

Porphyromonas gingivalis, a major pathogen of chronic periodontitis, colonizes in subgingival crevice and affects surrounding oral tissues, especially in periodontitis patients. Oral cancer mainly occurs in old-aged persons, and are exposed to the P. gingivalis, released from periodontitis, one of the most common inflammatory disease of oral cavity. Thus oral cancer cells may be infected with P. gingivalis, and its biologic behavior are autologously and/or heterogeneously modulated by altering gene expression. Exosomes which are derived from cells contain not only coding genes but also non-coding RNAs such as long non-coding RNAs, miRNA, and piRNAs. Here, to investigate the effect of P. gingivalis on oral cancer cells and to gain insight into the crosstalk between inflammatory signal from tumor microenvironment and oral cancer, we observed miRNA profiles of exosomes from P. gingivalis–infected oral cancer cells. Upregulation of 6 miRNAs, miR-203-3p, miR-6516-3p, miR-483-5p, miR-1275, miR-8485, and miR-19a-3p, were observed whereas 14 miRNAs including let-7a-3p, miR-106a-5p were downregulated. In addition, KEGG pathway analysis using the upregulated- and downregulated- miRNAs showed association with cell adhesion molecules pathway and ECM-receptor interaction pathway, respectively. These findings suggest that P. gingivalis could modulate biologic behavior of oral cancer cells through changes of exosomal miRNAs.

As part of the third ATM Challenge, we performed a series of atmospheric dispersion simulations for routine releases of Xe-133 from ordinarily operating nuclear facilities such as Medical Isotope Production Facilities (MIPFs), Nuclear Power Plants (NPPs), and Research Reactors (RRs) in the Northern Hemisphere using our ATM, Lagrangian Atmospheric Dose Assessment System (LADAS), with Numerical Weather Prediction (NWP) data produced by the Korea Meteorological Administration (KMA). The simulation time period is 6 months, from June to November in 2014, and we used the stack emission data except for CNL (Canada) and IRE (Belgium) in accordance with the scenario of the third ATM Challenge 2019. In addition, the simulations were done individually for all MIPFs, NPPs, and RRs. We utilized 3-hourly KMA’s Unified Model Global Data Assimilation and Prediction System (UM-GDAPS) data with 0.35°×0.23° horizontal resolution as input meteorological fields and extracted hourly time series results for Xe-133 activity concentrations with few different resolutions such as 0.5°×0.5°, 0.35°×0.23°, and 0.1°×0.1° at several IMS stations in the Northern Hemisphere which were in normal operation in 2014. Considering previously reported values of daily Xe-133 release amounts for CNL and IRE, measured signals at some IMS stations (such as CAX17, DEX33, SEX63, and USX75) were well reproduced from the simulation results.

High Integrity Container (HIC) made of polymer concrete was developed for the efficient treatment and safe disposal of radioactive spent resin and concentrate waste in consideration of the disposal requirements of domestic disposal sites. Permission for application of Polymer Concrete High Integrity Container (PC-HIC) to the domestic nuclear power plants (NPPs) has been completed or is under examination by the regulatory agency. In the case of 860 L PC-HIC for very-low-level-waste (VLLW) or low low-level-waste (LLW), the application of four representative NPPs has been approved, and the license for extended application to the rest NPPs is also almost completed. A licensing review is also underway to apply 510 L PC-HIC for intermediate and low-level-waste (ILLW) to representative nuclear power plants. In order to handle and efficiently store and manage PC-HICs and high-dose PCHIC packages, a gripper device that can be remotely operated and has excellent safety is essential, and the introduction of NPPs is urgent. The conventional gripper device developed by the PC-HIC manufacturer for lifting test to evaluate the structural integrity of PC-HIC requires a rather wide storage interval due to its design features, and does not have a passive safety design to handle heavy materials safely. In addition, work convenience needs to be reinforced for safety management of high radiation work. Therefore, we developed a conceptual design for a gripper device with a new concept to minimize the work space by reflecting on-site opinions on the handling and storage management conditions of radioactive waste in NPPs, and to enhances work safety with the passive safety design by the weight of the package and the function of checking the normal seating of the device and the normal operation of the grip by the detector/indicator, and to greatly improves the work efficiency and convenience with the wireless power supply function by rechargeable battery and the remote control function by camera and wireless monitoring & control system. Through design review by experts in mechanical system, power supply and instrumentation & control fields and further investigations on the usage conditions of PC-HICs, it is planned to facilitate preparations for the application of PC-HIC to domestic NPPs by securing the technical basis for a gripper device that can be used safely and efficiently and seeking ways to introduce it in a timely manner.

In the present work, a three-phase AC arc plasma torch system is proposed to separate inorganic radioactive materials from the organic liquid waste. For this purpose, first, assuming the resistance of arc plasma ranges between 0.1 and 0.2 ohm, we designed a three-phase AC arc plasma power supply with the power level of 20 kW. Then, a three phase arc plasma torch consisting of three carbon rods with the diameter of 20 mm was designed and mounted on a cylindrical combustion chamber with the inner diameter of 150 mm. Detail design and basic performance of the plasma system were presented and discussed for application to the treatment of radioactive slurry wastes.

In this work, we report the basic performance of a 100 kW class mobile plasma melting system consisting of two 24-ft commercial containers, each in charge of the plasma utilities and melting process. In this system, a 100 kW class transferred type plasma torch has been installed together with a crucible having an inner volume of 2,884 cm3. Filling the inner volume of the crucible with the simulated metal waste, such as bolts and nuts, melting tests have been carried out for 5 min by varying plasma input power from 50 kW to 100 kW. By measuring the volume of metal waste before and after melting test, then, the volume reduction rates were estimated and discussed.

We developed a 100 kW Class Transferred Type Plasma Torch applicable for melting of noncombustible metal wastes. By employing reverse polarity discharge structures for hollow electrode plasma torch, a transferred type arc plasma was generated stably with long arc length higher than 10 cm at the arc currents of ~400 A and gas (N2) flow rate of ~50 lpm. High arc currents and high arc voltages caused by the increased arc length could input high power level of ~100 kW to the noncombustible metal wastes, enabling quick melting. In addition, relatively long arc length and low gas flow rates can help reduce the deposition of melted materials on the exit surface of the torch. Thanks to these features, the developed plasma torch is expected to be suitable for small-scaled and portable melting system.