We aimed to evaluate the effectiveness of ensemble optimal interpolation (EnOI) in improving the analysis of significant wave height (SWH) within wave models using satellite-derived SWH data. Satellite observations revealed higher SWH in mid-latitude regions (30o to 60o in both hemispheres) due to stronger winds, whereas equatorial and coastal areas exhibited lower wave heights, attributed to calmer winds and land interactions. Root mean square error (RMSE) analysis of the control experiment without data assimilation revealed significant discrepancies in high-latitude areas, underscoring the need for enhanced analysis techniques. Data assimilation experiments demonstrated substantial RMSE reductions, particularly in high-latitude regions, underscoring the effectiveness of the technique in enhancing the quality of analysis fields. Sensitivity experiments with varying ensemble sizes showed modest global improvements in analysis fields with larger ensembles. Sensitivity experiments based on different decorrelation length scales demonstrated significant RMSE improvements at larger scales, particularly in the Southern Ocean and Northwest Pacific. However, some areas exhibited slight RMSE increases, suggesting the need for region-specific tuning of assimilation parameters. Reducing the observation error covariance improved analysis quality in certain regions, including the equator, but generally degraded it in others. Rescaling background error covariance (BEC) resulted in overall improvements in analysis fields, though sensitivity to regional variability persisted. These findings underscore the importance of data assimilation, parameter tuning, and BEC rescaling in enhancing the quality and reliability of wave analysis fields, emphasizing the necessity of region-specific adjustments to optimize assimilation performance. These insights are valuable for understanding ocean dynamics, improving navigation, and supporting coastal management practices.

많은 연구에 따르면 Tenebrio molitor은 유충 단계에서 플라스틱을 섭취할 수 있다고 보고되었다. 이 연구의 목적은 T. molitor 유충의 성장과 발달에 발포폴리스티렌 섭취가 미치는 영향을 조사하는 것이다. 밀기울을 섭취한 유충의 성장률은 발포폴리스티렌을 섭취한 유충의 성장률보다 더 좋았고(p < 0.001) 발포폴리스티렌을 섭취한 유 충의 번데기로 전환되는 기간은 밀기울을 섭취한 유충의 번데기로 전환되는 기간보다 더 빨랐다(p < 0.001). 하지만 두 처리구간 생존율은 유의미한 차이가 없었다(p = 0.786). 이 결과에 따르면 발포폴리스티렌을 섭취한 유충은 체중 감소와 짧은 발육기간이 특징이지만 생존하는 것에는 문제가 없었다. 따라서 우리는 T. molitor가 플라스틱 폐기물 의 지속 가능하고 친환경적인 제거를 위한 주요 자원이라는 결론을 내렸다.

The development of thermoelectric (TE) materials to replace Bi2Te3 alloys is emerging as a hot issue with the potential for wider practical applications. In particular, layered Zintl-phase materials, which can appropriately control carrier and phonon transport behaviors, are being considered as promising candidates. However, limited data have been reported on the thermoelectric properties of metal-Sb materials that can be transformed into layered materials through the insertion of cations. In this study, we synthesized FeSb and MnSb, which are used as base materials for advanced thermoelectric materials. They were confirmed as single-phase materials by analyzing X-ray diffraction patterns. Based on electrical conductivity, the Seebeck coefficient, and thermal conductivity of both materials characterized as a function of temperature, the zT values of MnSb and FeSb were calculated to be 0.00119 and 0.00026, respectively. These properties provide a fundamental data for developing layered Zintl-phase materials with alkali/alkaline earth metal insertions.

실내 벽면녹화용으로 많이 이용되고 있는 덩굴식물 스킨답 서스(Epipremnum aureum)는 줄기의 상·하 유인방향에 생장 차이를 보이는 것으로 알려져 있으나 그 원인에 대해서는 구 체적으로 알려져 있지 않다. 본 연구에서는 광원의 위치(상· 하)와 줄기 유인방향(상·하)에 따른 스킨답서스의 생장반응을 15주간 조사하였다. 그 결과 정상적인 식물 생장 환경조건인 광원이 위에 있고 줄기를 위로 유인한 처리를 제외하고는 광 원이 아래에 위치하거나 줄기를 아래로 유인한 처리에서는 굴 곡과 뒤틀림 정도가 매우 컸다. 이것은 굴광성과 항굴지성에 대한 식물체 지상부의 반응 결과이며, 굴광성과 항굴지성의 경합반응은 식물체 아래 광원이 위치하고 줄기를 아래로 유인 했을 때 더욱 뚜렷하였다. 광원의 위치와 줄기 유인방향에 따 른 스킨답서스의 생장 반응은 굴광성과 항굴지성으로 설명 가 능하며 굴광성의 영향이 상대적으로 높게 나타났다.

Tropilaelaps mercedesae Anderson and Morgan, 2007 (Acari: Laelapidae) is a serious ectoparasite of the brood of several honey bee species. Among the four recognized species of Tropilaelaps, Korean population was renamed as T. mercedesae from T. clareae on the basis of morphological evidences and genetic data. In this study, we report the complete mitochondrial genome (mitogenome) sequence of T. mercedesae. The 15,119-bp long mitogenome has an identical gene arrangement to that of Chinese sample reported previously. Comparison of two geographic samples showed COII, ND5, ND4, ND6, CytB, and ND1 to have higher number of variable sites than COI, which is often used for population-level study, suggesting these genes to have potential usefulness for population genetic study. The mitogenome sequence of T. mercedesae from Korea could be useful for species identification for geographic samples, trace of the origin of local populations, and illustration of evolutionary distinction among Tropilaelaps species either using part of or whole genome.

When the parent radionuclide decays, the progeny radionuclide is produced. Accordingly, the dose contribution of the progeny radionuclide should be considered when assessing dose. For this purpose, European Commission (EC) and International Atomic Energy Agency (IAEA) provide weighting factors for dose coefficient. However, these weighting factors have a limitation that does not reflect the latest nuclide data. Therefore, in this study, we analyzed the EC and IAEA methodology for derivation of weighting factor and used the latest nuclide data from ICRP 107 to derive weighting factors for dose coefficient. Weighting factor calculation is carried out through 1) selection of nuclide, 2) setting of evaluation period, and 3) derivation based on ICRP 107 radionuclide data. Firstly, in order to derive the weighting factor, we need to select the radionuclides whose dose contribution should be considered. If the half-life of progeny radionuclides sufficiently short compared to the parent radionuclide to achieve radioactive equilibrium, or if the dose coefficient is greater of similar to that of the parent radionuclide and cannot be ignored, the dose contribution of the progeny radionuclide should be considered. In order not to underestimate the dose contribution of progeny radionuclides, the weighting factors for the progeny nuclides are taken as the maximum activity ratio that the respective progeny radionuclides will reach during a time span of 100 years. Finally, the weighting factor can be derived by considering the radioactivity ratio and branch fraction. In order to calculate the weighting factor, decay data such as the half-life of the radionuclide, decay chain, and branch fraction are required. In this study, radionuclide data from ICRP 107 was used. As a result of the evaluation, for most radionuclides, the weighting factors were derived similarly to the existing EC and IAEA weighting factors. However, for some nuclides, the weighting factors were significantly different from EC and IAEA. This is judged to be a difference in the half-life and branch fraction of the radionuclide. For example, in the case of 95Zr, the weighting factor for 95mNb showed a 35.8% difference between this study and previous study. For ICRP 38, when 95Zr decays, the branch fraction for 95mNb is 6.98×10-3. In contrast, for ICRP 107, the branch fraction is 1.08×10-2, a difference of 54.7%. Therefore, the weighting factor for the dose coefficient based on ICRP 107 data may differ from existing studies depending on the half-life and decay information of the nuclide. This suggests the need for a weighting factor based on the latest nuclide data. The results of this study can be used as a basis for the consideration of dose contributions for progeny radionuclides in various dose assessments.

한국형아유르베다 성격유형과 의류 구매만족과 어떤 관계가 있는지를 분석함으로써 성격특성을 고려한 마케팅 전략에 대해 논의하는 것이다. 본 연구의 자료는 수도권 여성 20대 이상을 대상으로 다음과 같은 통계 분석을 실시하였다. 첫째, 조사대상자의 일반적 특성을 파악하기 위해 빈 도분석을 실시하였고, 둘째, 측정도구의 타당성 분석을 위해 탐색적 요인 분석을 실시하였다. 또한 Cronbach's α 계수를 이용하여 요인을 구성 하는 항목들의 신뢰도를 분석하였다. 셋째, 한국형 아유르베다 기본심리 유형에 대해 알아보고, 조사대상자의 일반적 특성에 따라 차이가 있는지 파악하기 위해 교차분석을 실시하였다. 넷째, 한국형 아유르베다 기본심 리유형에 따라 고객만족에 차이가 있는지를 알아보기 위하여 일원변량분 석(one-way ANOVA) 및 Scheffe의 사후검정을 실시하였다. 본 연구는 한국형아유르베다 기본심리유형과 고객만족의 관계에서는, 전반적인 고 객만족과 하위요인별 서비스만족에 있어서도 카파형(K)이 상대적으로 높 은 것을 알 수 있었지만, 품질만족에 있어서는 통계적으로 유의미한 차 이가 나타나지 않았다는 것을 알 수 있었다.

Until now, in case of Palaearctic region, only one species, Nesendaeus monochrous in this genus was recorded from China. but the biology and life cycle are not clearly known, yet. This species collected from the bud of Glochidion chodoense in Korea for the first time and closely related to Heterochyromera imerodeus Kojima & Morimoto which was recorded only in Japan,. But Nesendaeus monochrous is easily distinguishable from H. imerodeus by the relatively longer elytra with bisinuately round apices. Heterochyromera imerodeus Kojima & Morimoto can be found from Eurya emarginata and Glochidion obovatum in Japan. So, this two species are closely related each other and need more taxonomic study about the generic synonymy or changing the generic position.

모기는 감염병을 매개하는 종으로 전염병 확산 억제를 위해서는 개체수의 감시와 정확한 예측이 필요하다. 본 연구에서는 모기 개체수 및 기상 및 현장 자료를 활용해 모기 개체수 머신러닝 모델을 개발하였다. 모기 개체수는 디지털 모기 측정기(Digital Mosquito Monitoring System, DMS)의 2015 년~2022년의 5월~10월의 자료를 활용하였다. 기상 자료는 기온, 강수량, 풍속, 습도를 사용하였으며, 현장 조사 자료는 현장을 명목척도와 서열척도로 나누어 기록하여, 명목 척도의 경우 원핫 인코딩으 로 변환해 수치화하여 사용하였다. 분석에 사용된 머신러닝 모델은 Artificial Neural Network, Random Forest, Gradient Boosting Machine, Support Vector Machine이며 성능지표로 R2, RMSE를 사용하였다. 연구 결과, Gradient Boosting 모델이 R2 0.4, RMSE 22.45로 가장 좋은 성능을 나타냈다. 현장 조사 자료 를 분석에 활용하였을 때 R2는 증가하였고, RMSE는 감소하였다. 본 연구 결과 모기 개체수에 현장 조사 자료가 예측 정확도를 향상시킬 수 있음을 확인하였다.

This study was aimed to isolate bacterial inoculants producing chitinase and evaluate their application effects on corn silage. Four corn silages were collected from four beef cattle farms to serve as the sources of bacterial inoculants. All isolates were tested against Fusarium graminearum head blight fungus MHGNU F132 to confirm their antifungal effects. The enzyme activities (carboxylesterase and chitinase) were also measured to isolate the bacterial inoculant. Based on the activities of anti-head blight fungus, carboxylesterase, and chitinase, L. buchneri L11-1 and L. paracasei L9-3 were subjected to silage production. Corn forage (cv. Gwangpyeongok) was ensiled into a 10 L mini silo (5 kg) in quadruplication for 90 days. A 2 × 2 factorial design consists of F. graminearum contamination at 1.0104 cfu/g (UCT (no contamination) vs. CT (contamination)) and inoculant application at 2.1 × 105 cfu/g (CON (no inoculant) vs. INO (inoculant)) used in this study. After 90 days of ensiling, the contents of CP, NDF, and ADF increased (p<0.05) by F. graminearum contamination, while IVDMD, acetate, and aerobic stability decreased (p<0.05). Meanwhile, aerobic stability decreased (p<0.05) by inoculant application. There were interaction effects (p<0.05) on IVNDFD, NH3-N, LAB, and yeast, which were highest in UCT-INO, UCT-CON, CT-INO, and CT-CON & INO, respectively. In conclusion, this study found that mold contamination could negatively impact silage quality, but isolated inoculants had limited effects on IVNDFD and yeast.

Although the proportion of coal-fired power generation is decreasing, efficient operating technology is needed to continuously invest in facilities and reduce maintenance costs until it is abolished. Boilers, one of the main facilities of power plants, operate for a long time in harsh environments of high temperature and high pressure. In addition, damage due to deterioration is likely to occur depending on the fuel and tube material used. It is very important to judge soundness because damage caused by deterioration adversely affects facility operation. Previously, replication method was used to analyze the progress of deterioration. In the replication method, pre-treatment such as chemical treatment is performed on the boiler tube in the field, the area is reproduced by attaching a film, and the replicated film is determined by an expert in the laboratory with an expensive microscope. However, this method involves substantial costs and time requirements, as well as the possibility of human errors. To address these issues, we developed a mobile health assessment system in this research. Since it is detachable and takes images in real time, this system enables swift evaluations across a broad range and facilitates the assessment of preprocessing quality. In addition, it was intended to reduce existing human mistakes by developing a degradation classification algorithm using the merger cluster method.

In factory automation, efforts are being made to increase productivity while maintaining high-quality products. In this study, a CNN network structure was designed to quickly and accurately recognize a cigarette located in the opposite direction or a cigarette with a loose end in an automated facility rotating at high speed for cigarette production. Tobacco inspection requires a simple network structure and fast processing time and performance. The proposed network has an excellent accuracy of 96.33% and a short processing time of 0.527 msec, showing excellent performance in learning time and performance compared to other CNN networks, confirming its practicality. In addition, it was confirmed that efficient learning is possible by increasing a small number of image data through a rotation conversion method.

There are many types of foam molding methods. The most commonly used methods are the pressure foaming method, in which foam resin is mixed with a foaming agent at high temperature and high pressure, and the normal pressure foaming method, which foams at high temperature without pressure. The polymer resins used for foaming have different viscosities. For foaming under normal pressure, they need to be designed and analyzed for optimal foaming conditions, to obtain resins with low melt-viscosity or a narrow optimal viscosity range. This study investigated how changes in viscosity, molding temperature, and cross-link foaming conditions affected the characteristics of the molded foam, prepared by blending rubber polymer with biodegradable resin. The morphologies of cross sections and the cell structures of the normal pressure foam were investigated by SEM analysis. Properties were also studied according to cross-link/foaming conditions and torque. Also, the correlation between foaming characteristics was studied by analyzing tensile strength and elongation, which are mechanical properties of foaming composites.

본 연구는 탄소 흐름 관점에서 기존 농촌경관 시스템 구조를 분석하고 이를 토대로 탄소중립 농촌경 관으로 전환하기 위한 자연기반해법을 제시하였다. 농촌경관 시스템은 생산경관, 자연경관, 생활경 관 하위 시스템으로 구성되어 있었으며, 각 하위 시스템을 인과지도 작성하고 이를 통합하였다. 통합 인과지도를 분석한 결과, 토지 이용 및 인간 활동 관리와 피드백 루프의 재구축을 위한 자연기반해법 전략이 필요하다는 것을 확인하였다. 이를 기반으로 본 연구는 ‘토양유기탄소 보존을 위한 탄소 농 업’, ‘탄소 흡수원 경관 관리’, ‘기후스마트 농업’, 그리고 ‘신재생에너지 기반 순환 농업’을 제안하였 다. 본 연구 결과는 기존 생산과정 중심의 농촌지역의 탄소중립 정책에서 벗어나 농촌경관 시스템의 전반적인 탄소 흐름을 확인하여 자연기반해법을 제시하였다는 데에 의의가 있다.

본 연구는 360도 파노라마 동영상을 활용하여 해상풍력 경관의 유형을 분류하고 유형별 경관 선호 매 트릭스 요소에 따른 경관 선호도를 분석하고자 한다. 이를 위해 첫째, 연구대상지로 제주 탐라해상풍력 단지로 선정하였으며, 연구대상지를 조망할 수 있는 지점들을 추출하고 방문하여 360도 파노라마 동영 상을 촬영하였다. 둘째, 구축된 360도 파노라마 동영상 자료를 바탕으로 경관의 미학적 특성을 분석하 고 해상풍력 경관의 유형을 분류했다. 셋째, 해상풍력 경관의 유형별로 경관 선호 매트릭스 요소와 경관 선호도를 설문조사했다. 넷째, 수집된 데이터를 활용하여 해상풍력 경관 유형별 선호 매트릭스 요소에 따른 경관 선호도 관계를 분석했다. 분석 결과 해상풍력 경관 유형이 High Continuity(HCN), High Color (HCL), Low Visual Impact(LVI), High Visibility(HVI)로 분류되었다. 또한, HCN경관 선호도에 영향을 주 는 요소로는 응집성이, HCL경관 선호도에 영향을 주는 요소로는 응집성과 신비성이, LVI경관 선호도 에 영향을 주는 요소로는 응집성과 복잡성이, HVI 경관 선호도에 영향을 주는 요소로는 응집성과 가독 성이 도출되었다. 본 연구 결과를 바탕으로 해상풍력 경관 선호도 향상을 위한 전략으로 (1)시각적 영향 을 줄일 수 있는 식재계획 및 동선설계, (2)해상풍력 터빈의 생상 대비 극대화, (3)해상풍력 터빈 설치전 경관 시뮬레이션을 제안하였다.

Kori unit 1, the first PWR (Pressurized Water Reactor) in Korea, was permanent shut down in 2017. In Korea, according to the Nuclear Safety Act, the FDP (Final Decommissioning Plan) must be submitted within 5 years of permanent shutdown. According to NSSC Notice, the types, volumes, and radioactivity of solid radioactive wastes should be included in FDP chapter 9, Radioactive Waste Management, Therefore, in this study, the types depending on generation characteristics and radiological characterization methods and process of solid radioactive waste were analyzed. Solid radioactive waste depending on the characteristics of the generation was classified into reactor vessel and reactor vessel internal, large components, small metals, spent nuclear fuel storage racks, insulation, wires, concrete debris, scattering concrete, asbestos, mixed waste, soil, spent resins and filters, and dry active waste. Radiological characterization of solid radioactive waste is performed to determine the characteristics of radioactive contamination, including the type and concentration of radionuclides. It is necessary to ensure the representativeness of the sample for the structures, systems and components to be evaluated and to apply appropriate evaluation methods and procedures according to the structure, material and type of contamination. Therefore, the radiological characterization is divided into concrete and structures, systems and components, and reactor vessel, reactor vessel internal and bioshield concrete. In this study, the types depending on generation characteristics and radiological characterization methods and process of solid radioactive waste were analyzed. The results of this study can be used as a basis for the preparation of the FDP for the Kori unit 1.