장미과의 과일 및 관상용 식물은 세계적으로 경제적, 원예적 가치가 뛰어나다. 장미과의 뱀딸기는 관상 및 약용 작물로써 이용가치가 매우 높은데, 증식방법이 마련되어 있지 않은 실정 이다. 뱀딸기의 종자 종자발아 특성을 조사하기 위해 내부형태 관찰, 수분흡수실험, 온도 별 배양, move-along test, GA3처리 실험을 수행하였다. 뱀딸기 종자는 탈리시점부터 성숙한 배를 지닌다. 수분흡수실험 결과, 침지 3시간만에 종자 무게가 초 기무게 대비 100% 이상 증가하였다. 온도 별 배양 실험 결 과, 25/15, 20/10, 15/6, 5, 25, 20, 15°C에서 각각 8주간 배양하였을 때 88, 71, 61, 12, 89, 39, 17%로 나타났다. Move-along test의 T125/15°C(12주)→20/10°C(4주)→ 15/6°C(4주)→5°C(12주)]에서 12주차까지 72%가 발아하였고 T2[4°C(12주)→15/6°C(4주)→20/10°C(4주)→25/15°C(12주)] 에선 20/10°C까지 발아하지 않았고 25/15°C에 도달하고 나서 발아하여 최종발아율은 16%로 나타났다. GA3처리구에선 배양 3주차에 발아를 시작한 반면에 대조구에선 배양 4주차부터 발 아하였다. 따라서 한반도 자생 뱀딸기 종자는 PD로 분류하였다. 뱀딸기속과 Potentilla속 식물은 서로 근연관계이고, 종간의 종 자휴면에 차이가 나타나 종자휴면 특성에 분화가 일어난 것으로 판단된다.

많은 연구에 따르면 Tenebrio molitor은 유충 단계에서 플라스틱을 섭취할 수 있다고 보고되었다. 이 연구의 목적은 T. molitor 유충의 성장과 발달에 발포폴리스티렌 섭취가 미치는 영향을 조사하는 것이다. 밀기울을 섭취한 유충의 성장률은 발포폴리스티렌을 섭취한 유충의 성장률보다 더 좋았고(p < 0.001) 발포폴리스티렌을 섭취한 유 충의 번데기로 전환되는 기간은 밀기울을 섭취한 유충의 번데기로 전환되는 기간보다 더 빨랐다(p < 0.001). 하지만 두 처리구간 생존율은 유의미한 차이가 없었다(p = 0.786). 이 결과에 따르면 발포폴리스티렌을 섭취한 유충은 체중 감소와 짧은 발육기간이 특징이지만 생존하는 것에는 문제가 없었다. 따라서 우리는 T. molitor가 플라스틱 폐기물 의 지속 가능하고 친환경적인 제거를 위한 주요 자원이라는 결론을 내렸다.

The development of thermoelectric (TE) materials to replace Bi2Te3 alloys is emerging as a hot issue with the potential for wider practical applications. In particular, layered Zintl-phase materials, which can appropriately control carrier and phonon transport behaviors, are being considered as promising candidates. However, limited data have been reported on the thermoelectric properties of metal-Sb materials that can be transformed into layered materials through the insertion of cations. In this study, we synthesized FeSb and MnSb, which are used as base materials for advanced thermoelectric materials. They were confirmed as single-phase materials by analyzing X-ray diffraction patterns. Based on electrical conductivity, the Seebeck coefficient, and thermal conductivity of both materials characterized as a function of temperature, the zT values of MnSb and FeSb were calculated to be 0.00119 and 0.00026, respectively. These properties provide a fundamental data for developing layered Zintl-phase materials with alkali/alkaline earth metal insertions.

갯까치수염은 다육성의 2년생 초본 자생식물로서, 제주도, 울릉도를 비롯하여 남해안 지역에서 자라며 자생지의 환경에 맞게 내염성이 크다는 특징이 있고, 다양한 환경에 적응하며 관상가치가 높다. 관련 문헌을 보면 발아조건과 개화조절에 대한 연구만 보고되었고 그 중간단계인 재배에 관한 연구가 부족하여 대량생산을 위한 공정육묘법 개발의 일환으로 이 실 험을 수행하였다. 실험은 플라스틱온실 내에서 발아시킨 1cm 전후의 묘를 50, 128, 200구 트레이에 이식하여 한국원시표 준액(N-P-K-Ca-Mg, 15-3-6-8-4)을 각각 권장 EC농도의 0, 0.5, 1, 2배 농도로 매일 5분간 순환식으로 저면 관수하여 6주간 재배 후 초장, 근장, 엽수, 뿌리수, SPAD, 생체중, 건물 중을 측정하였다. 갯까치수염 생육은 플러그 셀 크기 50셀에 서 생육이 가장 높았다. 양액농도에 따른 갯까치수염의 생육 은 0.5배액에서 초장과 근장의 수치가 가장 높았으며, 모든 생육지표가 양액 농도변화에 따른 차이가 발생하는 것으로 나 타났고 실질적인 총 생산량의 지표라고 할 수 있는 지상부와 지하부의 건물중에 영향을 미치지 않았다는 결과가 나온 것으 로 미뤄 육묘단계에서 양액의 농도가 셀 크기보다 갯까수치염 의 묘 생육에 더 영향이 큰 것으로 보인다. 갯까치수염의 조직 충실도 면에서 0.5, 1, 2배액의 200구에서 가장 높은 결과값 들이 나왔다. 결과적으로 기존 원시표준액에 비해 생장에 유 리한 결과를 보이며 비료도 절약할 수 있는 0.5배 양액처리조 건이 갯까치수염 육묘 재배에 더 효율적이였다.

장내 미생물 군집은 소화 과정, 면역 시스템, 질병 발생 등 숙주의 다양한 면에 광범위한 영향을 주는 것으로 알려져 있으며, 주요 장내 미생물 종은 숙주의 생리 기능에 핵심적인 역할을 수행한다고 발표된 바 있다. 곤충의 장내 미생물 군집에 관한 연구가 최근 활발히 이루어지고 있으며, 이들 연구는 주로 장내 미생물 군집과 기생충, 병원체 간의 상호작용, 종간의 신호 전달 네트워크, 먹이의 소화 과정 등을 중심으로 이루어지고 있다. 이러한 연구들은 대부분 Illumina MiSeq을 활용하여 16S rRNA 유전자의 V1부터 V9 영역 중 선택된 특정 부분을 대상으로 짧은 서열 정보를 대상으로 진행되었다. 그러나, 최근에는 PacBio HiFi 기술이 상용화되면서 16S rRNA의 전장 분석이 가능할 수 있게 되었다. 이번 연구는 장수말벌(Vespa mandarinia)의 해부를 통해 gut과 carcass 부분을 분리한 뒤, 각 샘플을 Illumina MiSeq과 PacBio HiFi 기술을 활용하여 미생물 군집 간의 차이점을 확인하기 위하여 수행되었다.

Haemaphysalis longicornis는 사람과 동물에게 여러 심각한 병원체를 전달하는 주요 매개체로, 한반도에 널리 분포하고 있다. H. longicornis는 Rickettsia spp., Borrelia spp., Francisella spp., Coxiella spp., 그리고 중증열성혈소판 감소증후군 바이러스 (SFTS virus) 등을 매개하는 것으로 알려져 있다. 국내에 서식하는 H. longicornis의 미생물 군집과 관련된 연구는 많이 진행되지 않은 것으로 확인되었다. 이 연구는 한반도 내 다양한 지역에서 채집된 H. longicornis의 미생물군집 다양성을 지역별, 성장 단계 및 성별에 따라 분석하였다. 2019년 6월부터 7월까지 질병관리청 권역별기후변화매개체감시거점센터 16개 지역에서 채집한 H. longicornis의 16S rRNA 유전자 V3-V4 영역을 PCR로 증폭 후 Illumina MiSeq 플랫폼으로 시퀀싱하였다. Qiime2를 활용한 미생물 다양성 분석을 통해 총 46개의 샘플에서 1,754,418개의 non-chimeric reads를 얻었으며, 평균 126개 의 operating taxonmic unit (OTU) 을 식별하여 총 1,398개의 OTU를 확인하였다. 대부분의 지역에서 Coxiella spp.가 우점종으로 나타났으며, 특히 Coxiella endosymbiont는 가장 높은 우점도를 보이며, Coxiella burnetii와 계통 발생 학적으로 유사한 것으로 확인되었다. 이 연구를 통해 분석된 결과는 각 지역의 H. longicornis 미생물군집 데이터 베이스 구축에 활용되었으며, 이를 통해 지역별 미생물군집의 특이성을 식별할 수 있게 하였다. 이는 한반도의 H. longicornis에 의한 질병 전파 연구와 이를 통한 공중보건 개선에 기여할 것으로 기대된다.

Recently, it is demonstrate that the invertebrates have a immune memory, called Immune priming (IP). It was partially studied that the IP is mainly regulated by epigenetic modification. Here, to understand the IP on antimicrobial peptides (AMPs) production, we investigated larval mortality and time-dependent expression patterns of AMP genes in T. molitor larvae challenged with E. coli (two-times injection with a one-month interval). Interestingly, the results indicate that the higher and faster expression levels of most AMP genes were detected compared to the non-primed T. molitor larvae. Our results may used to improve the understanding of mechanisms of invertebrate immune memory.

Pellino, a highly conserved E3 ubiquitin ligase, is known to mediate ubiquitination of phosphorylated Interleukin-1 receptor-related kinase (IRAK) homologs in Toll signaling pathway. To understand the immunological function of TmPellino, we screened the knockdown efficiency of TmPellino by injecting TmPellino-specific dsRNA into T. molitor larvae. Subsequently, we investigated the larval mortality and the tissue-specific expression patterns of antimicrobial peptide (AMP) genes against microbial challenges. Interestingly, the results indicate that the expression of many AMP genes was upregulated in the Malpighian tubules of TmPellino-silenced T. molitor larvae. This study may provide basic information to understand how Tmpellino regulates AMPs production in T. molitor.

Tumor necrosis factor receptor-associated factor (TRAF) is known to regulate antimicrobial peptides (AMPs) production in mammals. Here, to understand the immunological function of TmTRAF against microbial challenge, the induction patterns of TmTRAF against microbial infection was investigated by qRT-PCR in the whole-body and tissue of young larvae. In addition, the effects of TmTRAF RNAi on larval mortality and expression of 15 AMP genes in response to microbial infection were investigated. Our studies may help to understand the basic role of AMP production.

Tube, an intracellular protein of the Toll-pathway, forms a complex with Pelle and MyD88, and regulates a signal transduction to activate NF-κB in Drosophila. To understand the antimicrobial function of TmTube, the induction patterns of TmTube were investigated at 3, 6, 9, 12, and 24 h-post injection of pathogens into 10th to 12th instar larvae. In addition, we investigated the effects of TmTube RNAi on larval mortality and tissue specific AMP expression in response to microbial challenge. Our results will provide a basic information to elucidate the immunological function of TmTube

In insects, the glutathione S-transferase is initiated in both the detoxification process and the protection of cellular membranes against oxidative damage. In this study, we identified the open reading frame (ORF) sequence of GST-iso1 and 2 from Tenebrio molitor (TmGST-iso1 and 2). To investigate the expression patterrns of TmGST-iso1 and 2 in response to herbicide, 0.06, 0.6, and 6 ㎍/㎕ of butachlor (FarmHannong, Seoul, South Korea) was challenged into T. molitor larvae, resulting that the TmGST-iso1 were highly induced at 3 and 24 h-post injection. Whereas, the highest expression of TmGST-iso2 was detected at 24 h after treatment. This study may contribute to basic information about the detoxifying activities of T. molitor.

Pelle, a serine/threonine kinase, is an intracellular component of the Toll pathway and is involved in antimicrobial peptides (AMPs) production due to pathogenic infection. It is known that the Pelle phosphorylates Cactus and activates the NF-κB signaling pathway in Drosophila, but it is not studied in Tenebrio molitor. In this study we investigated the tissue-specific expression patterns of the Pelle following pathogenic infection at 3, 6, 9, 12, and 24 hours. Additionally, larval mortality and AMP expression against microbial injection were investigated in dsPelle-treated T. molitor larvae. Our results may help to understand the antimicrobial function of TmPelle.

It is well known that the JNK pathway regulates AMP production against pathogenic infection in both vertebrates and invertebrates. Tenebrio molitor hep (Tmhep) is an homolog of MAP kinase kinase in mammals. Here, we investigate the immunological function of Tmhep in responses in microbial infection using RNA interference technology. The results showed that silencing of Tmhep increased the larval mortality against microbial challenge, as well as reduced AMP production compared to the control group (dsEGFP-treated group). Conclusively, Tmhep plays an critical role in antimicrobial defense in T. molitor larvae.

The domestic Pressurized Heavy Water Reactor (PWHR) nuclear power plant, Wolsong Unit 1, was permanently shut down on December 24, 2019. However, research on decommissioning has mainly focused on Pressurized Water Reactors (PWRs), with a notable absence of both domestic and international experience in the decommissioning of PHWRs. If proper business management such as radiation safety and waste is not performed, it can lead to increased business risks and costs in decommissioning. Therefore, the assessment of waste volume and cost, which provide fundamental data for the nuclear decommissioning process, is a crucial technical requirement before initiating the actual decommissioning of Wolsong Unit 1. Decommissioning radiation-contaminated structures and facilities presents significant challenges due to high radiation levels, making it difficult for workers to access these areas. Therefore, technology development should precede decommissioning process assessments and safety evaluations, facilitating the derivation of optimal decommissioning procedures and ensuring worker safety while enhancing the efficiency of decommissioning operations. In this study, we have developed a program to estimate decommissioning waste amounts for PHWRs, building upon prior research on PWR decommissioning projects while accounting for the specific design characteristics of PHWRs. To evaluate the amount of radioactive waste generated during decommissioning, we considered the characteristics of radioactive waste, disposal methods, packaging container specifications, and the criteria for the transfer of radioactive waste to disposal operators. Based on the derived algorithm, we conducted a detailed design and implemented the program. The proposed program is based on 3D modeling of the decommissioning components and the calculation of the Work Difficulty Factor (WDF), which is used to determine the time weighting factors for each task. Program users can select the cutting and packaging conditions for decommissioning components, estimate waste amount based on the chosen decommissioning method, and calculate costs using time weighting factors. It can be applied not only to PHWRs, but also to PWRs and non-nuclear fields, providing a flexible tool for optimizing decommissioning process.

A facile and efficient method was developed to prepare highly stretchable and conductive graphene conductors with wrinkled structures by the mechanical stretching and shrinking of elastomeric substrates, in which graphene inks were printed on a prestretched elastomeric substrate. Stretchable and exfoliated graphene inks were prepared by mixing graphite and Ecoflex in a shear-assisted fluid dynamics reactor. The resultant graphene conductor exhibited excellent stretchability at 150% strain and high electrical conductivity of 64 ± 1.2 S m− 1. The resistance of the conductor did not change in bent, twisted, and stretched states. The resistance did not change during 10,000 cycles of stretching/releasing, with a maximum strain of 150%. Based on the graphene conductor, a stretchable conductometric sensor with a two-electrode configuration was fabricated to measure impedance changes at different concentrations of electrolyte ions. This sensor exhibited a good and linear sensitivity curve (298.61 Ω mM− 1, R2 = 0.999) in bent and stretched states.

With the aging of nuclear power plants (NPPs) in 37 countries around the world, 207 out of 437 NPPs have been permanently shutdown as of August 2022 according to the IAEA. In Korea, the decommissioning of NPPs is emerging as a challenge due to the permanent shutdown of Kori Unit 1 and Wolsong Unit 1. However, there are no cases of decommissioning activities for Heavy Water Reactor (HWR) such as Wolsong Unit 1 although most of the decommissioning technologies for Light Water Reactor (LWR) such as Kori Unit 1 have been developed and there are cases of overseas decommissioning activities. This study shows the development of a decommissioning waste amount/cost/process linkage program for decommissioning Pressurized Heavy Water Reactor (PHWR), i.e. CANDU NPPs. The proposed program is an integrated management program that can derive optimal processes from an economic and safety perspective when decommissioning PHWR based on 3D modeling of the structures and digital mock-up system that links the characteristic data of PHWR, equipment and construction methods. This program can be used to simulate the nuclear decommissioning activities in a virtual space in three dimensions, and to evaluate the decommissioning operation characteristics, waste amount, cost, and exposure dose to worker. In order to verify the results, our methods for calculating optimal decommissioning quantity, which are closely related to radiological impact on workers and cost reduction during decommissioning, were compared with the methods of the foreign specialized institution (NAGRA). The optimal decommissioning quantity can be calculated by classifying the radioactivity level through MCNP modeling of waste, investigating domestic disposal containers, and selecting cutting sizes, so that costs can be reduced according to the final disposal waste reduction. As the target waste to be decommissioning for comparative study with NAGRA, the calandria in PHWR was modeled using MCNP. For packaging waste container, NAGRA selected three (P2A, P3, MOSAIK), and we selected two (P2A, P3) and compared them. It is intended to develop an integrated management program to derive the optimal process for decommissioning PHWR by linking the optimal decommissioning quantity calculation methodology with the detailed studies on exposure dose to worker, decommissioning order, difficulty of work, and cost evaluation. As a result, it is considered that it can be used not only for PHWR but also for other types of NPPs decommissioning in the future to derive optimal results such as worker safety and cost reduction.