The effect of multi-walled carbon nanotubes (MWCNT) coating in the presence of polyethyleneimine (PEI) of different molecular weights (MW) on the interfacial shear strength (IFSS) of carbon fiber/acrylonitrile–butadiene–styrene (ABS) and carbon fiber/epoxy composites was investigated. The IFSS between the carbon fiber and the polymer was evaluated by means of single fiber microbonding test. The results indicated that uses of the carbon fibers uncoated and coated with pristine, low MW PEI-treated, and high MW PEI-treated MWCNT significantly influenced the IFSS of both thermoplastic and thermosetting carbon fiber composites as well as the carbon fiber surface topography. The incorporation of low MW (about 1300) PEI into the carboxylated MWCNT was more effective not only to uniformly coat the carbon fiber with the MWCNT but also to improve the interfacial bonding strength between the carbon fiber and the polymer than that of high MW (about 25,000) PEI. In addition, carbon fiber/epoxy composite exhibited the IFSS much higher than carbon fiber/ABS composite due to the chemical interactions between the epoxy resin and amine groups existing in the PEI-treated MWCNT.

충청북도농업기술원에서는 연한 분홍색의 향기가 있고, 꽃수가 많으며, 개화기간을 오래 지속할 수 있는 속간 교배종 난 ‘핑키뷰티’를 육성하였다. 신품종 ‘핑키뷰티’는 2007년 Phal. pulcherrima × Phal. parishii 교배종을 모본으로, Neof. falcata ‘Hwacheon’을 부본으로, 속간교배하였다. 종자 발아, 재배, 선발, 특성검정은 2008년부터 2014년까지 진행되었다. 생육이 좋고 꽃의 색, 모양이 우수한 계통을 선발 한후, 2015년부터 2017년까지 3년에 걸쳐 국립종자원 신품종 심사기준으로 특성검정 결과, 우수성이 인정되어 2018년 최종 선발하여 “핑키뷰티”로 명명하였다. 주요 특성은 다음과 같다. 화색은 연분홍색으로 Red-purple Group 68D(RHS칼라차트)이며, 향기가 있고 화경색은 암록색이다. 식물체 크기는 12.7cm로 대조품종과 큰 차이를 보이지 않았다. 잎의 폭은 1.6cm로 대조품종인 P. pulcherrima에 비해 좁은 편이다. 화경장은 25.8 cm이며, 소화수는 16.3개로, 전반적으로 화분의 볼륨감이 우수한 편이다. 꽃의 크기는 2.5cm 정도이며, 꽃의 순판 뒤쪽에 풍란과 같은 짧은 거가 있는 것이 특징이다. 개화기는 5월 하순이며, 개화기간은 34일 정도이다.

The periodic occurrence of biological population is affected by several biological and environmental factors and ancient literature survey offers insight into ecological process related to the cyclicity. The periodic occurrence of a Lepidopteran species, the pine caterpillar (Dendrolimus spectabilis), was estimated based on ancient literature survey. The pine caterpillar was one of the most injurious defoliators of pine trees in northeast Asia, especially Korea during 1960s and 1970s. Outbreaks of this species have long history in Korea. Since about 900 years ago, damages of pine forest by this species and its control were recorded both in History of Corea dynasty which cover 475 years (918-1392) of the history of the Corea Dynasty and in the Annals of Joseon Dynasty (Joseon Wangjo Shillok) which cover 472 years (1392-1863) of the history of the Joseon Dynasty, respectively. At least over 20 and 30 occurrences of pine caterpillar were recorded during Corea dynasty and Joseon Dynasty, respectively. These results showed that the pine caterpillar had been one of the most severe forest pests during Corea and Joseon Dynasty. Our result showed that the ancient literature survey is useful to understand the long-term periodic occurrence of the pine caterpillar.

하늘매발톱꽃(Aguilegia flabellata var. pumila K.) 육묘시 적정 용토종류 및 시비 수준을 구명코자, 용토종류는 원예용 상토, 피트모스, 밭흙, 원예용상토 + 피트모스(1:1, v/v), 원예용상토 + 밭흙(1:1, v/v), 밭흙 + 피트모스(1:1, v/v), 밭흙 + 퇴비(1:1, v/v), 원예용상토 + 피트모스 + 밭흙(1:1:1, v/v/v) 혼합용토를 사용하였으며, 시비 시험은 기준시비량을 질소 – 인산 – 칼리 = 12 – 9 – 12kg/10a(초화류 표준시비량)을 기준으로 하여 기준시비량 대비 0%, 50%, 75%, 100%, 125% 및 150%를 처리하여 시험한 결과, 용토종류는 용토별 화학적 특성은 피트모스가 pH 및 양분함량이 가장 낮았고, 원예용 상토 및 퇴비가 혼합된 용토에서 EC를 비롯한 양분함량이 높은 경향이었다. 발아율은 피트모스 단용 처리에서 파종 30일 및 45일에 각각 48% 및 54%로 가장 낮았고, 밭흙 + 퇴비 혼합용토에서는 86%였고, 그 외 용토에서는 92~98%였다. 파종 후 120일과 150일의 묘생육은 원예용상토에서 가장 좋았다. 시비량별 생육은 무처리에 비하여 시비 처리구에서 생육이 좋았으며, 식재 100일 후 생육에서는 기준 시비량 75%, 100% 및 125%에서 양호한 경향을 보였다. 기준 시비량 150% 처리에서는 오히려 생육이 감소하는 경향이었다. 결과적으로 하늘매발톱꽃 육묘시 육묘용토에서는 원예상토를 이용하고 시비기준은 기준시비량 대비 75%로 관리하는 것이 전반적인 생육이 양호하였다.

Biochar obtained from the thermal conversion of biomass has high potential as a substitute material for activated carbon and other carbon-based materials because it is economical, environmentally friendly, and carbon-neutral. The physicochemical properties of biochar can also be controlled by a range of activation methods such as physical, chemical, and hydrothermal treatments. Activated biochar can be used as a catalyst for the catalytic pyrolysis of a biomass and as an absorbent for the removal of heavy metal ions and atmospheric pollutants. The applications of biochar are also expanding not only as a key component in producing energy storage materials, such as supercapacitors, lithium ion batteries, and fuel cells, but also in carbon capture and storage. This paper reviews the recent progress on the activation of biochar and its diverse present and future applications.

In the present study, biomass-based lignin was extracted from industrial waste black liquor and the extracted lignin was characterized by means of attenuated total reflectance- Fourier transform infrared spectroscopy and 1H-nuclear magnetic resonance spectroscopy. The extracted lignin was carbonized at different temperatures and then activated with steam at 850oC. The extracted lignin in powder state was transformed into a bulky carbonized lignin due to possible fusion between the lignin particles occurring upon carbonization. The carbonized and then pulverized lignin exhibits brittle surfaces, the increased thermal stability, and the carbon assay with increasing the carbonization temperature. The scanning electron microscopic images and the Brunauer-Emmett-Teller result indicate that the steam-activated carbon has the specific surface area of 1718 m2/g, which is markedly greater than the carbonized lignin. This study reveals that biomassbased activated carbon with highly porous structure can be produced from costless black liquor via steam-activation process.

A aderid genus Phytobaenus Sahlberg is reported from Korea for the first time based on P. amabilis amabilis Sahlberg. In Korea, only one aderid species, Hylophilus praescutellaris Pic, has been recorded in Korea. A redescription of the species and illustrations of diagnostic characteristics including male genitalia are provided.

As a replacement for activated carbon, biochar was synthesized and used for the adsorptive removal of formaldehyde and nitrogen oxide. Biochar was produced from the fast pyrolysis of the red marine macro alga, Pyropia tenera. The P. tenera char was then activated with steam, ammonia and KOH to alter its characteristics. The adsorption of formaldehyde, which is one of the main indoor air pollutants, onto the seaweed char was performed using 1-ppm formaldehyde and the char was activated using a range of methods. The char activated with both the KOH and ammonia treatments showed the highest adsorptive removal efficiency, followed by KOH-treated char, ammonia-treated char, steam-treated char, and non-activated char. The removal of 1000-ppm NO over untreated char, KOH-treated char, and activated carbon was also tested. While the untreated char exhibited little activity, the KOH-treated char removed 80% of the NO at 50°C, which was an even higher NO removal efficiency than that achieved by activated carbon.

Refuse-derived fuel (RDF) produced using municipal solid waste was pyrolyzed to produce RDF char. For the first time, the RDF char was used to remove aqueous copper, a representative heavy metal water pollutant. Activation of the RDF char using steam and KOH treatments was performed to change the specific surface area, pore volume, and the metal cation quantity of the char. N2 sorption, Inductively Coupled Plasma-Atomic Emission Spectrometer (ICP-AES), and Fourier transform infrared spectroscopy were used to characterize the char. The optimum pH for copper removal was shown to be 5.5, and the steam-treated char displayed the best copper removal capability. Ion exchange between copper ions and alkali/alkaline metal cations was the most important mechanism of copper removal by RDF char, followed by adsorption on functional groups existing on the char surface. The copper adsorption behavior was represented well by a pseudo-second-order kinetics model and the Langmuir isotherm. The maximum copper removal capacity was determined to be 38.17 mg/g, which is larger than those of other low-cost char adsorbents reported previously.

This study was carried out with the goal of improving accessibility for farmers in record management. The pre-survey for farm records found that the main reasons for lack of records were “no need” and “no time” to keep such records. Based on the results of the pre-survey of smartphone-based farm recordkeeping, the major composition articles were management books, daily work logs, analysis books and additional books compiled by setting log in, notice and suggestions. The number of smartphone- based farm record books was 4,430 nationwide. We also updated farms keeping records on seven occasions for user convenience. Regional differences in the utilization ratio of record books showed that continuous promotion and education aimed at users were key points of success for farm recordkeeping books.

This study fabricated low thermal conductive polyacrylonitrile (PAN)-based carbon fibers containing cellulose particles while maintaining their mechanical properties. The high thermal conductivity of carbon fibers limits their application as a high temperature insulator in various systems such as an insulator for propulsion parts in aerospace or missile systems. By controlling process parameters such as the heat treatment temperature of the cellulose particles and the amount of cellulose added, the thermal and mechanical properties of the PANbased carbon fibers were investigated. The results show that it is possible to manufacture composite carbon fibers with low thermal conductivity. That is, thermal conductivities were reduced by the cellulose particles in the PAN based carbon fibers while at the same time, the tensile strength loss was minimized, and the tensile modulus increased.

Lacticin NK34 is a small nisin-like bacteriocin present in the supernatants of an isolate of Lactococcus lactis from jeotgal, a salted and fermented Korean food made with seafood such as shrimp, oysters, and fish. Recently, we demonstrated that a partially purified NK34 is highly effective against various Staphylococcus species in a murine infection model. In this study, the two major bacterial pathogens associated with bovine mastitis, Streptococcus aureus and S. agalactiae, were evaluated for their susceptibility to NK34 in vitro using a standard teat-dip assay as well as in vivo using mastitic cows infected with one of these pathogenic strains. The experimental analyses showed a significant decrease (up to 98 times) in the bacterial numbers between the NK34-treated and -untreated teats. Moreover, a dramatic reduction in somatic cell counts was observed at 3 days post-treatment with 10 ml of NK34 administered directly into the mastitic cows. Neither S. aureus nor S. agalactiae were recovered. Taken together, these results imply that lacticin NK34 is an alternative antimicrobial substitute for the treatment of bovine mastitis, caused especially by either S. aureus or S. agalactiae.

Lentinula edodes is known by oak mushroom. It has been favored as delicious and nutritious food and the low-calorie food with a high nutritional value. It is also functional food since it contains a material well-known for its medicinal benefits. Since the growth and quality of oak mushrooms are sensitively affected by environmental conditions, an adequate environmental control is very essential to improve the yield and quality under protected cultivation. The main objectives of the study were to investigate cultural characteristics of mycelial growth and in vitro fruiting of Lentinula edodes. The optimum culture media for mycelial growth of L. edodes were PDA and MYA. Similarly, optimum temperature was 25℃. Malt extract(2%) and yeast extract(0.2%) were optimum carbon and nitrogen sources. Optimal culture period was 110~120 days in sawdust medium. Among different five log types, highest mycelial growth and fruiting productivity were observed in Quercus variabilis sawdust(20.9%).