Technetium has been identified as an element of interest for the safety assessment of a deep geological repository for used nuclear fuel. In this study, the sorption of Tc(IV) onto MX-80 bentonite, illite, and shale in ionic strength (I) 0.1–6 mol·kgw−1 (m) Na-Ca-Cl solutions at pHm = 4–9 and limestone at pHm = 5–9 was studied. Tc(IV) sorption on MX-80 increased with pHm from 4 to 6, reached the maximum at pHm = 6–7, and then gradually decreased with pHm from 7 to 9. Tc(IV) sorption on illite gradually increased with pHm from 4 to 7, and then decreased as pHm increased. The sorption properties of Tc(IV) on shale were quite similar to those on illite. Tc(IV) sorption on limestone slightly increased with pHm from 5 to 6 and then seemed to be constant at pHm = 6–9. Tc(IV) sorption on all four solids was independent of ionic strength (0.1–6 m). The 2 site protolysis non-electrostatic surface complexation and cation exchange model successfully simulated the sorption of Tc(IV) onto MX-80 and illite and the optimized values of surface complexation constants were estimated.

Technetium-99 is identified as an element of interest for the safety assessment of a deep geological repository for used nuclear fuel. The sorption behavior of Tc(IV) onto MX-80 and granite in Ca-Na-Cl solutions of varying ionic strength (0.05–1 mol·kgw−1 (m)) and across a pHm range of 4–9 was studied in this paper. Sorption of Tc(IV) was found to be independent of ionic strength in the range of 0.05 to 1 m for both MX-80 and granite. Sorption of Tc(IV) on MX-80 increased with pHm from 4 to 7 and then decreased with pHm from 8 to 9. Sorption of Tc(IV) on granite gradually increased with pHm from 4 to 8 and then became almost constant or slightly decreased with pHm from 8 to 9. A 2 site protolysis non-electrostatic surface complexation and cation exchange sorption model successfully simulated sorption of Tc(IV) on MX-80 and granite. Optimized values of surface complexation constants (log K0) are proposed.

Cordyceps militaris is widely used in China, Korea, and other Asian countries as both a traditional medicinal ingredient and an edible fungus. This study aimed to optimize the growth conditions and fruiting body production of C. militaris by investigating various culture media and physical parameters such as pH, aeration, illumination, temperature, spawn materials, and oat–sawdust-based substrate formulations. After a 7-day incubation period, oats with a pH of 6.0, under sealed and illuminated conditions at 32°C, demonstrated the most effective mycelial growth. Substrates consisting of 70% oat and 30% sawdust had the shortest incubation time of 30.5 days for fruiting body formation. The basidiospores showed a typical germination pattern where the sporidium produced a single germ tube that elongated, and branched to form monokaryotic primary mycelia. In conclusion, using oats as a substrate in the cultivation of C. militaris could reduce production costs and help protect the environment.

We studied the effects of initial pH, different nitrogen sources, and cultivation methods (shake flask and static culture) on biomass production, exopolysaccharides (EPS), and adenosine by Paecilomyces tenuipes. Relatively low pH levels were optimal for mycelial growth and EPS production. Yeast extract was the most effective organic nitrogen source for EPS production, whereas soybean extract was the best for adenosine production. A high C/N ratio was beneficial for adenosine production; however, excessively high C/N ratios reduced adenosine production. Static fermentation significantly increased adenosine production. A Box-Behnken design was used to optimize adenosine production; the optimal conditions for adenosine production by P. tenuipes were pH 7.0, soybean concentration of 3%, and a static culture period of 20 days, with the maximum adenosine production of 141.10 mg/L (predicted value: 128.05 mg/L).

최근 국내외 화장품과 식품산업에서 다양하게 사용되어 지고 있는 콜라겐 단백질 제품은 점차 그 용도와 특성에 따라 보다 고도화, 기능화 되어 가고 있다. 피부 건강의 지표인 콜라겐은 다양한 용도로 개발되어 사용되고 있으 며, 콜라겐의 소비가 증가함에 따라 용도에 적합한 최적 화된 콜라겐 제품의 개발이 중요한 연구 분야이다. 특히 여러 기업과 연구기관들에 의해서 콜라겐의 흡수율을 높 이기 위한 다양한 노력이 이루어지고 있다. 따라서 본 연 구에서는 프란즈(Franz) 세포 시스템을 이용하여 국내에서 판매되는 다양한 분자량별 콜라겐 제품의 경피 및 구강 상피세포 투과성을 비교하였다. 그 결과, 피부 표피/진피 조직과 비교하여 구강점막 조직의 콜라겐 흡수율이 분자 량 500달톤과 1,000달톤의 경우 모두 통계적으로 유의하 게(각각 약 10배, 2배) 높은 것으로 확인되었다. 또한, 분 자량별 구강점막 조직 흡수율을 비교한 결과, 분자량 500 달톤의 콜라겐이 분자량 1,000달톤 제품에 비해 흡수율이 2-3배 증가함을 확인하였다. 분자량 500달톤의 경우 Cmax 와 AUCt 값이 가장 높게 나타났으며, 피부 표피/진피 세 포에 비해 구강점막세포 시험군의 모든 지표가 높은 것으 로 나타났다. 본 연구 결과는 피부 흡수보다는 구강 점막 세포를 통한 콜라겐의 흡수방법이 콜라겐 체내 흡수증가 에 유효한 수단임을 시사하며, 분자량 1,000달톤 이하에서 도 보다 더 작은 500달톤의 저분자 콜라겐의 흡수율이 증 가되는 것으로 보아 콜라겐의 분자량이 흡수율 증가의 주 요한 요소임을 확인할 수 있었다.

Ethanol production from various agricultural and forest residues has been widely researched, but there is limited information available on the use of mixed hardwood for ethanol production. The main objective of this study is to assess the impact of time on the steam explosion pretreatment of waste wood (mixed hardwood) and to determine the convenience of a delignification step with respect to the susceptibility to enzymatic hydrolysis of the cellulose residue and the recoveries of both cellulose and hemicellulosic sugars. Delignification did enhance enzymatic hydrolysis yields of steam exploded waste wood. For steam explosion pretreatment times of 3 and 5 min, the recovery yield of hemicellulosic-derived sugars decreased. The effective hemicellulose solubilization does not always result in high recoveries of hemicellulose-derived sugars in the liquid fractions due to sugar degradation. In the steam explosion pretreatment times of 3 and 5 min, where hemicellulose solubilization exceeded 95%, but sugar recoveries in the liquid fraction remained below 30%. Cellulose to glucose yield losses were less significant than hemicellulosic-sugar losses, with a maximum loss of 24% at 5 min. Up to 80% of the lignin in the original wood was solubilized, leaving a cellulose-rich residue that led to a concentrated cellulose to glucose yield solution (about 50 g/L after 72 h enzymatic hydrolysis in the best case). The maximum overall process yield, taking into account both sugars present in the liquid from steam explosion pretreatment and cellulose to glucose yield from the steam exploded, delignified and hydrolyzed solid was obtained at the lowest steam explosion pretreatment time assayed.

CO2 photocatalytic reduction is a carbon–neutral renewable energy technology. However, this technology is restricted by the low utilization of photocatalytic electrons. Therefore, to improve the separation efficiency of photogenerated carriers and enhance the performance of CO2 photocatalytic reduction. In this paper, g-C3N4/Pd composite with Schottky junction was synthesized by using g-C3N4, a two-dimensional material with unique interfacial effect, as the substrate material in combination with the co-catalyst Pd. The composite of Pd and g-C3N4 was tested to have a strong localized surface plasmon resonance effect (LSPR), which decreased the reaction barriers and improved the electron utilization. The combination of reduced graphene oxide (rGO) created a π–π conjugation effect at the g-C3N4 interface, which shortened the electron migration path and further improved the thermal electron transfer and utilization efficiency. The results show that the g-C3N4/ rGO/Pd (CRP) exhibits the best performance for photocatalytic reduction of CO2, with the yields of 13.57 μmol g− 1 and 2.73 μmol g− 1 for CO and CH4, respectively. Using the in situ infrared test to elucidate the intermediates and the mechanism of g-C3N4/rGO/Pd (CRP) photocatalytic CO2 reduction. This paper provides a new insight into the interface design of photocatalytic materials and the application of co-catalysts.

Sulfamonomethoxine (SMM) is widely used to inhibit Gram-positive and Gram-negative bacteria, and improper use of SMM is detrimental to human health and ecological stability. Therefore, a sensitive determination method is of great importance for monitoring SMM residues in water, meat, milk, eggs, etc. Herein, a Pt-functionalized S-doped graphitic carbon nitride (Pt/Sg- C3N4) was constructed for the electrochemical determination of SMM. The as-developed Pt3/ S3-g-C3N4 sensor showed a significant SMM determination performance. The electrochemical oxidation of SMM on Pt3/ S3-g-C3N4/GCE involves two electron transference and was limited by a diffusion process. The as-developed Pt3/ S3-g-C3N4/GCE sensor has good linearity in a wide range of 0.1–120 μmol/L and a remarkably low limit of detection (LOD) of 0.026 μmol/L for SMM determination. In addition, the sensor has high selectivity and anti-interference properties for SMM detection. Furthermore, this Pt3/ S3-g- C3N4/GCE sensor has good reproducibility and stability. Moreover, the recoveries were in the range of 89.6–112.2% for the detection of the SMM in a real sample of egg. The proposed Pt3/ S3-g-C3N4/GCE sensor shows great potential for practical applications in detecting trace amounts of antibiotics.

The objective of this study was to determine the ultrasonication-assisted extraction conditions that maximize the DPPH radical scavenging activity of extracts obtained from the stems of Lespedeza bicolor Turcz through the application of the Response Surface Methodology (RSM). Before delving into the analysis of extraction conditions using the RSM model, we conducted efficiency validation of ultrasonication-assisted extraction and executed single-factor experiments for ethanol concentration, extraction time, and extraction temperature. The data obtained from these single-factor experiments were employed to construct the Box-Behnken Design (BBD). In these results, in the single-factor experiments, it was evident that the parameters for ethanol concentration, extraction time, and extraction temperature exhibited quadratic trends. The single-factor experiments allowed us to discern the trends for each parameter leading to the maximum antioxidant capacity, and this data was subsequently applied to the BBD. Following the completion of initial experiments, a Response Surface Methodology (RSM) model was constructed based on Box-Behnken Design (BBD). According to the predictive model developed in this study, it was anticipated that performing ultrasonic-assisted extraction for 85.0412 minutes at an ethanol concentration of 32.573% and an extraction temperature of 51.5608°C will result in a DPPH radical scavenging activity of 79.7146%. The predictive results were statistically verified through a comparative analysis with actual measurements and ANOVA analysis, confirming the statistical significance of the model. The finding of this study underscore the significance of optimizing extraction conditions in the precise quantification of the antioxidant potential for economic advantages in both experimental and industrial contexts.

수염풍뎅이(Polyphylla laticollis manchurica)는 과거에는 흔히 발견되었으나, 1970년대 이후 한반도 내 개체수 가 급격히 감소하여 2005년 환경부에 의해 멸종위기 야생생물 Ⅰ급으로 지정되었다. 또한 해당종의 분자생물학적 연구는 멸종위기종이라는 특성으로 인해 제한적으로 진행되었다. 그로 인해 NCBI 등 공공 데이터베이스에서 제공되는 서열정보들 또한 부족한 실정이다. 이 연구는 이러한 한계를 극복하고 수염풍뎅이의 유전적 특성을 규명하기 위해 생물정보학적 기술을 활용하여 전사체 분석을 진행하였다. Illumina HiSeq 2500 플랫폼을 사용하여 53,433,048개의 RNA reads를 얻었으며, Trinity와 TGICL을 이용한 De novo 어셈블리 분석을 통해 18,172개의 unigenes를 생성하였다. 생성된 unigenes는 GO, KOG, KEGG, PANM DB를 활용하여 annotation을 진행하였다. 그 결과, GO 분석에서는 ‘binding and catalytic activities’와 관련된 항목이 높은 발현을 보였으며, KOG 분석의 경우 ‘Cellular Processes and Signals’ 범주가 높은 비율을 나타내었다. KEGG 분석을 통해 2,118개의 unigenes가 metabolic 카테고리에 annotation된 것을 확인하였다. SSR 모티프 분석에서는 AT/AT (42.90%) 모티프, AAT/ATT (13.13%) 모티프 순으로 많이 나타나는 것을 확인하였다. 이 연구를 통해 분석한 결과 들을 이용하여 유전자원 및 종 정보를 실시간 제공 및 정보 공유가 가능하도록 Database 및 web-interface를 구축하 였으며, 이러한 자료들은 국내 멸종위기종인 수염풍뎅이의 고유한 유전적 특성을 발굴 및 확보할 수 있는 기반자 료로써 활용될 수 있을 것으로 사료된다.

장내 미생물 군집은 소화 과정, 면역 시스템, 질병 발생 등 숙주의 다양한 면에 광범위한 영향을 주는 것으로 알려져 있으며, 주요 장내 미생물 종은 숙주의 생리 기능에 핵심적인 역할을 수행한다고 발표된 바 있다. 곤충의 장내 미생물 군집에 관한 연구가 최근 활발히 이루어지고 있으며, 이들 연구는 주로 장내 미생물 군집과 기생충, 병원체 간의 상호작용, 종간의 신호 전달 네트워크, 먹이의 소화 과정 등을 중심으로 이루어지고 있다. 이러한 연구들은 대부분 Illumina MiSeq을 활용하여 16S rRNA 유전자의 V1부터 V9 영역 중 선택된 특정 부분을 대상으로 짧은 서열 정보를 대상으로 진행되었다. 그러나, 최근에는 PacBio HiFi 기술이 상용화되면서 16S rRNA의 전장 분석이 가능할 수 있게 되었다. 이번 연구는 장수말벌(Vespa mandarinia)의 해부를 통해 gut과 carcass 부분을 분리한 뒤, 각 샘플을 Illumina MiSeq과 PacBio HiFi 기술을 활용하여 미생물 군집 간의 차이점을 확인하기 위하여 수행되었다.

Paecilomyces tenuipes (P. tenuipes) is a fungus cultivated artificially by South Korean researchers, utilizing rice bran as its substrate. The increased demand for this fungus has not been met with successful cultivation methods for fruiting body production in natural environments. Therefore, we tested the effect on the growth of P. tenuipes using a Solid media based on pests. In this results, the Solid media based on M.alternatus was effective in increasing the growth of P. tenuipes and the content of cordycepin. Moreover, we confirmed the conditions for manufacturing a Solid media based on M.alternatus for P. tenuipes growth. We suggested that the growth-promoting compounds offers valuable insights for optimizing fungal cultivation conditions, thereby enhancing productivity and contributing to a broader understanding of fungal physiology in varying nutritional environments.

Plants synthesize antioxidant compounds as a defense mechanism against reactive oxygen species. Recently, plant-derived antioxidant compounds have attracted attention due to the increasing consumer awareness in the heath industry. However, traditional methods for measuring the antioxidant activity of these compounds are time-consuming and costly. Therefore, our study constructed a quantitative structure-activity relationship (QSAR) model that can predict antioxidant activity using graph convolutional networks (GCN) from plant structural data. The accuracy (Acc) of the model reached 0.6 and the loss reached 0.03. Although with lower accuracy than previously reported QSAR models, our model showed the possibility of predicting DPPH antioxidant activity in a wide range of plant compounds (phenolics, polyphenols, vitamins, etc.) based on their graph structure.

This study reports the synthesis of a novel graphene/chitosan/β-cyclodextrin composite material (GO/CS/β-CD) via a onestep chemical reduction method, which combines the advantages of graphene, chitosan, and β-cyclodextrin. The morphology and structure of the composite were characterized using various techniques, such as scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and Raman spectroscopy. Subsequently, sortase A (SA) was immobilized onto the GO/CS/β-CD for the detection of Staphylococcus aureus. The sensor exhibited a good linear relationship within the concentration range of 30–300 CFU/mL, with a detection limit of 12 CFU/mL. The GO/CS/β-CD composite material showed enhanced properties due to the synergistic effect of graphene, chitosan, and β-cyclodextrin. The immobilization of sortase A onto the composite material improved the sensitivity and selectivity of the sensor for the detection of S. aureus. This study presents a novel graphene/chitosan/β-cyclodextrin composite material with immobilized sortase A, demonstrating enhanced sensitivity and selectivity for the detection of Staphylococcus aureus, which has potential for the development of high-performance sensors in various fields.

Ship collision accidents not only endanger the safety of ships and personnel, but also may cause serious marine environmental pollution. To solve this problem, advanced technologies have been developed and applied in the field of intelligent ships in recent years. In this paper, a novel path planning algorithm is proposed based on particle swarm optimization (PSO) to construct a decision-making system for ship's autonomous collision avoidance using the process analysis which combines with the ship encounter situation and the decision-making method based on ship collision avoidance responsibility. This algorithm is designed to avoid both static and dynamic obstacles by judging the collision risk considering bad weather conditions by using BP neural network. When the two ships enter a certain distance, the optimal collision avoidance course and speed of the ship are obtained through the improved collision avoidance decision-making method. Finally, through MATLAB and Visual C++ platform simulations, the results show that the ship collision avoidance decision-making scheme can obtain reasonable optimal collision avoidance speed and course, which can ensure the safety of ship path planning and reduce energy consumption.

In this study, a bipolar visible light responsive photocatalytic fuel cell (PFC) was constructed by loading a Z-scheme g-C3N4/ carbon black/BiOBr and a Ti3C2/ MoS2 Schottky heterojunction on the carbon brush to prepare the photoanode and photocathode, respectively. It greatly improved the electron transfer and achieved efficient degradation of organic pollutants such as antibiotics and dyes simultaneously in two chambers of the PFC system. The Z-scheme g-C3N4/carbon black/BiOBr formed by adding highly conductive carbon black to g-C3N4/BiOBr not only effectively separates the photogenerated carriers, but also simultaneously retains the high reduction of the conduction band of g-C3N4 and the high oxidation of the valence band of BiOBr, improving the photocatalytic performance. The exceptional performance of Ti3C2/ MoS2 Schottky heterojunction originated from the superior electrical conductivity of Ti3C2 MXene, which facilitated the separation of photogenerated electron–hole pairs. Meanwhile, the synergistic effect of the two photoelectrodes further improved the photocatalytic performance of the PFC system, with degradation rates of 90.9% and 99.9% for 50 mg L− 1 tetracycline hydrochloride (TCH) and 50 mg L− 1 rhodamine-B (RhB), respectively, within 180 min. In addition, it was found that the PFC also exhibited excellent pollutant degradation rates under dark conditions (79.7%, TCH and 97.9%, RhB). This novel pollutant degradation system is expected to provide a new idea for efficient degradation of multiple pollutant simultaneously even in the dark.