This study proposes an integrated approach that uses both a fuzzy service FMEA (failure mode and effect analysis) and HOQ(house of quality) matrix algebra in designing and improving a service system. The fuzzy service FMEA methodology applies the customer

To investigate the biochemical nature of changes in vaginal physiology during estrus and pregnancy, we examined the cytology and viscosity, and monitored the protein expression profile in vaginal mucus during estrus and pregnancy. The viscosity progressively decreased from estrus to pregnancy. Cell type analysis revealed that white blood cells progressively increased from estrus to pregnancy, while red blood cells progressively decreased during pregnancy. The cornification index (CI) was higher in estrus than in pregnancy. Protein mass spectrumetry identified the presence of ribosome-binding protein 1, GRIP 1 (Glutamate receptor-interacting protein 1)-associated protein 1, DUF729 (Domain of unknown function729) domain-containing protein 1, prolactin precursor, dihydrofolatereductase, and MMP (Matrix metalloprotease)-9 in vaginal mucus. MMP-2 and MMP-9 proteins in the vaginal mucus were active throughout estrus and gestation, as measured by a gelatinase assay, but most abundant in the vaginal mucus on day 0 of estrus. Results from ELISA of MMP-2 and MMP-9 were in accordance with the gelatinase assay. In light of the crucial role of metalloproteinases in extracellular matrix remodeling, the level of MMP-9 in vaginal mucus might be useful as an indicator of estrus and pregnancy to increase the efficiency of reproduction.

The main purpose of this study is to estimate the effect of adding Tea-N-Tris to the freezing buffer for miniaturepig sperm. In particular, we attempted to identify the association between the MMPs expression and the survival and viability of sperms. Prior to freezing, sperms in LEY without Tea-N-Tris showed 40.3±2.8% viability and 60.3±1.3% acrosome intact rate at 4℃. After freezing, sperms stored in LEY (lactose+Egg yolk) with Tea-N-Tris (=TLE) showed the highest viability (57.4±1.8%) and acrosome intact rate (65.6±4.6%). In accordance with this, DNA fragmentation was the highest among sperms frozen in LEY while the lowest fragmentation was observed among sperms frozen in TLE. When these sperms were used for in vitro fertilization (IVF), the LEY group showed lower rate of blastocyst development, although the difference was not statistically significant. Meanwhile the rate of blastocyst development appeared similar when sperms from TLE and TFGE (Tea-N-Tris+Fructose+ Glucose+Egg yolk) group were used for IVF. We observed MMPs expression in all sperm groups, with pro-MMP showing lower expression than active MMPs. The expression of MMP-9 and MMP-2 was the highest in sperms frozen in LEY, Meanwhile, sperms from the TFGE and TLE group showed lower level of MMP-9 and MMP-2 expression in the order of TLE being the lowest. Together, these results indicate that adding Tea-N-Tris to the sperm freezing buffer would not only suppress MMPs expression but also minimize DNA fragmentation, providing a mean to improve the success rate in the in vitro manipulation of miniaturepig sperms. * This work was supported by BioGreen 21 Program (No. PJ008029). Rural Development Administation, Republic of Korea.

본 논문에서는 ASTM C 1260을 이용하여 국내산 골재를 대상으로 알칼리-실리카 반응 판정 결과 반응성으로 판정된 골재를 대상으로 알칼리-실리카 반응 억제효과를 고찰하기 위하여 플라이애시와 질산리튬을 사용한 시멘트 경화체의 ASTM C 1260 적용성을 평가하였다. 알칼리-실리카 반응에 의한 팽창현상이 발생하는 지역에서 CaO 함량이 낮은 플라이애시를 시멘트 중량의 10, 20, 30%를 대체하는 경우 ASTM C 1260으로 알칼리-실리카 반응 억제효과를 확인할 수 있었다. 그러나 질산리튬을 사용할 경우는 ASTM C 1260은 시편을 1N NaOH 수용액에 수침하여 80℃의 온도로 길이변화를 유도하므로 시편내에 혼입된 질산리튬 성분이 외부로 용출될 수 있기 때문에 알칼리-실리카 반응 억제효과를 도출하지 못하였다. 따라서 질산리듐의 ASR 억제효과를 확인하기 위해서는 다른 시험방법을 고려해야 한다.

Mammalian fertilization is a complex cascade process consisting of sperm migration through the female reproductive tract, physiological changes to sperm such as sperm capacitation and acrosome reaction, and sperm-egg interaction in the oviduct in vivo. On the other hand, in vitro fertilization (IVF) is a process by which egg cells are fertilized by sperm outside the body: in vitro. IVF has been used for a variety of purposes in reproductive biotechnology for human and animals. The discovery of sperm capacitation in 1951 promoted the development of IVF technology. In the initial stage of IVF, sperm capacitation in preincubation medium was shown to be essential to fuse with eggs. Besides, sperms should detour some of the in vivo regulations for IVF. This review introduces a general mammalian fertilization process, including sperm capacitation, removal of cumulus matrix, acrosome reaction, and sperm-egg fusion and focuses on the roles of key biochemical molecules, signal mechanisms, and genes involved during IVF and novel results of sperm-oocyte interaction elucidated in various gene-knockout mice models.

MMP-2, 9의 경우 난포의 발달, 난자의 성장, 그리고 배란 시 extracellular matrix를 재 구성하는 중요한 역할을 하는 것으로 알려져 있으며, 혈청배지 및 무혈청배지를 이용한 체외수정란의 배아발달 과정에 따른 MMPs(2, 9)와 TIMPs(2, 3)의 발현양상의 차이가 있 을 것으로 사료된다. 따라서 본 연구는 소의 체외성숙난자와 체외수정방법에 따른 체외수정란의 발달율과 cumulus cell(CC), single oocyte cell(SOC), cumulus oocyte complex(COC) 및 blastocyst 에서 MMPs와 TIMPs의 활성 및 단백질발현양상을 zymography와 ELISA에 의하여 분석 하였으며, immunofluorescence를 이용하여 발현위치분석을 실시하였다. 체외성숙 이후 Real-time PCR을 이용하여 mRNA의 발현양상을 분석한 결과 MMP-2, 9은 CC가 SOC보 다 높은 발현을 보였으며, TIMP-2, 3의 경우 상반된 발현양상을 보이고 있었다. MMPs의 활성도 분석결과도 mRNA의 결과와 같았으며, 배양배지의 MMPs의 단백질양적분석에서 도 같은 양상을 나타내고 있었으나, TIMP-2의 경우 SOC가 높은 발현을 보였으며, TIMP-3는 CC에서 높은 발현을 나타냈다. 위의 결과를 토대로 COC의 MMPs와 TIMPs의 단백질 작용위치를 분석한 결과 MMP-2는 난자의 세포질을 중심으로 발현양상을 나타내 고 있었으며, MMP-9에 비하여 높은 발현을 확인할 수 있었다. TIMPs의 경우 난자의 세 포질보다 난구세포에서의 발현이 높게 나타났으며, TIMP-3의 발현이 높게 나타났다. 체 외배양방법에 따른 blastocyst의 발달율은 무혈청배지(ES)(61.22% 60/98)가 혈청배지(CR- 1aa)(48.28% 28/58)보다 높은 발달율을 보였다. 체외수정배양배지의 MMPs의 단백질양적 분석결과 MMP-2는 ES가 CR-1aa보다 상대적으로 높은 발현을 보였고, MMP-9은 CR- 1aa가 ES보다 높은 발현을 보였다. TIMPs의 발현양상의 경우 대체적으로 TIMP-3의 발 현이 높게 나타났으며, apoptosis의 활성도 분석에서 Casp-3의 발현이 CR-1aa배양에서 높게 나타남을 확인할 수 있었다. MMPs와 TIMPs의 단백질작용위치를 분석한 결과는 ES는 MMPs와 TIMPs의 발현이 inner cell mass를 중심으로 발현이 높게 나타났으며, trophoblast에서는 낮은 발현이 나타났다. 이와 반대로 CR-1aa의 경우 ES와 다른 위치의 발현을 나타냈으며, TIMPs의 발현은 대체적으로 낮게 발현되었다. 따라서 본 연구 결과 는 무혈청배양 방법이 수정란의 발달 시 MMPs의 활성을 높여 배아형성에 영향을 줄 수 있을 것이라 사료된다.

Composites of insulating polyethylene and carbon black are widely used in switching elements, conductive paint, and other applications due to the large gap of resistance value. This research addresses the critical exponent of dielectric breakdown strength of polymer matrix composites (PMC) made with carbon black and polyethylene below the percolation threshold (Pt) for the first time. Here, Pt means the volume fraction of carbon black of which the resistance of the PMC is transferred from its sharp decrease to gradual decrease in accordance with the increase of carbon-black-filled content. First, the Pt is determined based on the critical exponents of resistivity and relative permittivity. Although huge cohesive bodies of carbon black are formed in case of being less than the Pt, a percolation path connecting the conducting phases is not formed. The dielectric breakdown strength (Dbs) of the PMC below Pt is measured by using an impulse voltage in the range from 10 kV to 40 kV to avoid the effect of joule heating. Although the observed Dbs data seems to be well fitted to a straight line with a slope of 0.9 on a double logarithm of (Pt-VCB) and Dbs, the least squares method gives a slope of 0.97 for the PMC. It has been found that finite carbon-black clusters play an important role in dielectric breakdown.

 ,  , Temperature-related parameters of Panonychus citri (McGregor) (Acarina: Tetranychidae) development were estimated and a stage-structured matrix model was developed. The lower threshold temperatures were estimated as 8.4℃ for eggs, 9.9℃ for larvae, 9.2℃ for protonymphs, and 10.9℃ for deutonymphs. Thermal constants were 113.6, 29.1, 29.8, and 33.4 degree days for eggs, larvae, protonymphs, and deutonymphs, respectively. Non-linear development models were established for each stage of P. citri. In addition, temperature-dependent total fecundity, age-specific oviposition rate, and age-specific survival rate models were developed for the construction of an oviposition model. P. citri age was categorized into five stages to construct a matrix model: eggs, larvae, protonymphs, deutonymphs and adults. For the elements in the projection matrix, transition probabilities from an age class to the next age class or the probabilities of remaining in an age class were obtained from development rate function of each stage (age classes). Also, the fecundity coefficients of adult population were expressed as the products of adult longevity completion rate (liiongevity) by temperature-dependent total fecundity. To evaluate the predictability of the matrix model, model outputs were compared with actual field data in a cool early season and hot mid to late season in 2004. The model outputs closely matched the actual field patterns within 30 d after the model was run in both the early and mid to late seasons. Therefore, the developed matrix model can be used to estimate the population density of P. citri for a period of 30 d in citrus orchards.

Pleomorphic adenoma (PA) is the most common benign salivary gland tumor. It is biphasic and is characterized by an admixture of epithelial and spindle-shaped myoepithelial cells in a variable background stroma. Epithelial-myoepithelial carcinoma (EMC) is a malignant biphasic salivary gland tumor typically composed of clear myoepithelial cells that surround epithelial-lined ducts resembling intercalated ducts. The differential diagnosis between the two tumor may be occasionally encountered because of the shared histophatologic feature. And then, it would be more reliable to differentiate the tumors based on biological behavior such as the expression of distinct intermediate filaments such as cytokeratin, invasiveness- related molecules, and the growth factor receptor to aberrantly facilitate the tumor growth, and the growth fraction of tumors. Therefore, from the 10 cases of PA and 6 cases of EMC, we immunohistochemically examined the differential expression of the cytokine 7 and 14, matrix metalloproteinase-9, C-KIT, and Ki-67 between the two tumor. At the results, there were significant differences of CK7 expression in non-luminal cells (P = 0.000) and CK14 expression in luminal and non-luminal cells of the both tumors (P = 0.025 and P = 0.000, respectively). In the comparison of the biologic behavior, a significantly increased expression of MMP-9, C-KIT and Ki-67 was found in the cases of EMC when compared to those of PA (P = 0.043, P = 0.011, and P = 0.000, respectively). In conclusion, the differences of CK expression in luminal and non-luminal cells between PA and EMC seem to reflect the difference of the origin and the level of the maturation of the tumor cell. Increased expression of MMP-9, C-KIT, and Ki-67 in EMC may represent more aggressive biologic behavior of the tumor compared with benign salivary tumor such as PA. Our results may be helpful to understand the histiogenesis of the two tumors and the difference of biologic behavior and to differentiate them when the limited specimen was submitted. Further study of many more cases of EMC is needed to validate the usefulness of these molecules as the diagnostic aid.

It is known that the relative dielectric constant of insulating polyethylene matrix composites with conducting materials (such as carbon black and metal powder) increases as the conducting material content increases below the percolation threshold. Below the percolation threshold, dielectric properties show an ohmic behavior and their value is almost the same as that of the matrix. The change is very small, but its origin is not clear. In this paper, the dielectric properties of carbon black-filled polyethylene matrix composites are studied based on the effect medium approximation theory. Although there is a significant amount of literature on the calculation based on the theory of changing the parameters, an overall discussion taking into account the theory is required in order to explain the dielectric properties of the composites. Changes of dielectric properties and the temperature dependence of dielectric properties of the composites made of carbon particle and polyethylene below the percolation threshold for the volume fraction of carbon black have been discussed based on the theory. Above the percolation threshold, the composites are satisfied with the universal law of conductivity, whereas below the percolation threshold, they give the critical exponent of s = 1 for dielectric constant. The rate at which the percentages of both the dielectric constant and the dielectric loss factor for temperature increases with more volume fraction below the percolation threshold.

본 연구에서는 선형 편광된 빔과 원형 편광된 빔을 이용한 이차 조화파 발생 현미경(Second Harmonic Generation Microscope)으로 비선형 물질인 KDP의 이미지를 얻었다. 펨토초 수준의 Ti-Sapphire 레이저를 광원으로 하였고, 편광상태발생기로 편광된 빔(0°, 45°, 90°, 우원편광)을 KDP에 투과시킨 후, 이차 조화파 신호를 발생시켜 편광상태 분석기로 검출하였다. 검출기로는 4개의 광전자증배관을 사용하였으며, 여기서 얻은 신호세기로 고유값 보정법을 이용하여 A 행렬을 구하였다. 그 결과, 스톡스 벡터와 A행렬로 뮬러 행렬을 구할 수 있음을 알았다. 또한 편광계를 더욱 발전시켜 세분화하였고, 대비효과를 높였으며, 편광된 빔(0°, 45°, 90°, -45°, 우원편광, 좌원편광)에 따른 KDP의 이미지 변화를 관찰하였다.

To manufacture a carbon/carbon composite the coal tar pitch was used as the matrix precursor and the PAN (polyacrylonitrile)-based carbon fiber was used as the reinforcing material to weave 3-directional preform. For pressure carbonization HIP equipment was used to produce a maximum temperature of 1000℃ and a maximum pressure of 100 MPa. The carbonization was induced by altering the dwell temperature between 250℃ and 420℃, which is an ideal temperature for the moderate growth of the mesophase nucleus that forms within the molten pitch during the pressure carbonization process. The application of high pressure during the carbonization process inhibits the mesophase growth and leads to the formation of spherical carbon particles that are approximately 30 nm in size. Most particles were spherical, but some particles were irregularly shaped. The spread of the carbon particles was larger on the surface of the carbon fiber than in the interior of the matrix pocket.

Films consisting of a silicon quantum dot superlattice were fabricated by alternating deposition of silicon rich silicon nitride and Si3N4 layers using an rf magnetron co-sputtering system. In order to use the silicon quantum dot super lattice structure for third generation multi junction solar cell applications, it is important to control the dot size. Moreover, silicon quantum dots have to be in a regularly spaced array in the dielectric matrix material for in order to allow for effective carrier transport. In this study, therefore, we fabricated silicon quantum dot superlattice films under various conditions and investigated crystallization behavior of the silicon quantum dot super lattice structure. Fourier transform infrared spectroscopy (FTIR) spectra showed an increased intensity of the 840 cm-1 peak with increasing annealing temperature due to the increase in the number of Si-N bonds. A more conspicuous characteristic of this process is the increased intensity of the 1100 cm-1 peak. This peak was attributed to annealing induced reordering in the films that led to increased Si-N4 bonding. X-ray photoelectron spectroscopy (XPS) analysis showed that peak position was shifted to higher bonding energy as silicon 2p bonding energy changed. This transition is related to the formation of silicon quantum dots. Transmission electron microscopy (TEM) and electron spin resonance (ESR) analysis also confirmed the formation of silicon quantum dots. This study revealed that post annealing at 1100˚C for at least one hour is necessary to precipitate the silicon quantum dots in the SiNx matrix.

A series of molecular dynamic (MD), finite element (FE) and ab initio simulations are carried out to establish suitable modeling schemes for the continuum-based analysis of aluminum matrix nanocomposites reinforced with carbon nanotubes (CNTs). From a comparison of the MD with FE models and inferences based on bond structures and electron distributions, we propose that the effective thickness of a CNT wall for its continuum representation should be related to the graphitic inter-planar spacing of 3.4Å. We also show that shell element representation of a CNT structure in the FE models properly simulated the carbon-carbon covalent bonding and long-range interactions in terms of the load-displacement behaviors. Estimation of the effective interfacial elastic properties by ab initio simulations showed that the in-plane interfacial bond strength is negligibly weaker than the normal counterpart due to the nature of the weak secondary bonding at the CNT-Al interface. Therefore, we suggest that a third-phase solid element representation of the CNT-Al interface in nanocomposites is not physically meaningful and that spring or bar element representation of the weak interfacial bonding would be more appropriate as in the cases of polymer matrix counterparts. The possibility of treating the interface as a simply contacted phase boundary is also discussed.

In this paper two aspects of the percolation and conductivity of carbon black-filled polyethylene matrix composites will be discussed. Firstly, the percolation behavior, the critical exponent of conductivity of these composites, are discussed based on studying the whole change of resistivity, the relationship between frequency and relative permittivity or ac conductivity. There are two transitions of resistivity for carbon black filling. Below the first transition, resistivity shows an ohmic behavior and its value is almost the same as that of the matrix. Between the first and second transition, the change in resistivity is very sharp, and a non-ohmic electric field dependence of current has been observed. Secondly, the electrical conduction property of the carbon black-filled polyethylene matrix composites below the percolation threshold is discussed with the hopping conduction model. This study investigates the electrical conduction property of the composites below the percolation threshold based on the frequency dependence of conductivity in the range of 20 Hz to 1 MHz. There are two components for the observed ac loss current. One is independent of frequency that becomes prevalent in low frequencies just below the percolation threshold and under a high electrical field. The other is proportional to the frequency of the applied ac voltage in high frequencies and its origin is not clear. These results support the conclusion that the electrical conduction mechanism below the percolation threshold is tunneling.