본 연구에서는 기 개발된 유한요소-경계요소 조합을 통한 지반구조물 상호작용해석기법을 이용하여 주파수 특성이 다른 여러 가지 지진파를 이용한 수치해석을 통하여 지진파에 따른 거동특성을 분석하였다. 사용한 기본해의 검증을 위하여 적용된 다층 반무한 해를 Estorff 등의 연구결과와 비교하였으며, 기본해를 이용하여 개발된 지반-구조물 상호작용해석기법의 검증을 위하여 자유장해석을 수행하였다. 자유장 해석결과는 1차원 파전달 이론에 의하여 개발된 자유장응답해석 프로그램인 SHAKE의 결과와 비교하여 그 타당성을 검증하였다. 검증된 해석기법을 이용하여 특성이 다른 3종류의 지진파가 적용된 2차원 평면상의 지반-구조물 상호작용해석을 수행함으로써 지진파와 말뚝유무에 따른 지반-구조물 상호작용거동특성을 분석하였다. 해석결과 지진이 작용할 때는 말뚝기초를 사용하는 것이 반드시 유리한 결과를 주지는 않는다는 것을 알았으며, 지반의 비선형성을 고려 할때는 말뚝의 유무가 지진응답결과에 큰 영향을 미치지 않는다는 것을 알 수 있었다.

A company wishes to obtain a competitive edge by adopting an efficient logistics information system to control the logistics management process. The elements of the competitive edges a company targets are to maintain good quality, reduce cost and on-time delivery and those competitive edges are closely related to the cycle time of a product. The logistics information system in a company is also closely tied with other business activities than the logistics itself. Therefore it is essential to choose a system that will help rationalize the logistics but also overall business operations along the supply chain from manufacturing to distribution of the products. This paper aims to research and analyze a problem with a logistics information system through case study and to suggest a logistics information system with RFID in place adopted to eliminate problems such as damages, loss and defect rates.

It is needed to develop on-line real time management and RFID-PPS(Radio Frequency Identification-Pallet Pool System) by putting information technology. Additionally, it is possible to figure out the flow of all the materials loaded on the RFID pallet; product, material, raw material immediately, so that epoch-making management is possible and it contributes to the reduction of logistics cost because there are little loss or outflow of pallet. The materials flow is getting speedy and inventory is decreasing in the logistics process, and also bad inventory and loss problems are prevented. As a result, not only logistics cost of company but also national logistics cost is decreased. Thus it contributes to the strength of national competitiveness.

Using the high-frequency induction heated combustion method, the simultaneous synthesis and densification of (x=0, 10, 20, 30) composites was accomplished using elemental powders of W, Si and C. A complete synthesis and densification of the materials was achieved in one step within a duration of 2 min. The relative density of the composite was up to 97% for the applied pressure of 60MPa and the induced current. The average grain size of are 6.9, 6.1, and , respectively. The hardness and the fracture toughness increases with increasing SiC content. The maximum values for the hardness and fracture toughness are .

스트로보광에 대한 어류의 전기생리학적 반응을 조사하기 위하여, 전갱이에 각각 4단계의 섬광빈도(1.7~25Hz)와 강도(56~415lx·s)로 광자극을 주어, 그에 대한 망막활동전위 (ERG)를 조사한 결과는 다음과 같다. 1. ERG 진폭은 스트로보광을 조사한 순간에 최대가 되고, 그 후 가장 작았다가 점차 커져서 안정되는 경향을 보였다. 2. 섬광빈도에 따른 ERG 진폭은 광자극 후 약 12~17분부터 안정되는 경향을 보였다. 3. 전갱이가 받는 자극량은 섬광빈도 10Hz 에서 가장 많았고, 스트로보광 강도가 약해짐에 따라 감소하였다. 4. ERG 진폭변화는 10Hz가 가장 컸고, 스트로보광의 강도가 감소함에 따라 적었다.

Is not used by consistency transport at transport of freight nothing but is using Pallet only by pedestal when work palletized unit load or materials handling when keep simplicity receptacle which fill raw material or product in factory in our country. Therefore, pallet that is most important function of Pallet is not empled circulation to end consumer from manufacturing plant which is circulation process whole path being done and factory. It is real condition stopping only in extremely determinate part process use of warehouse back. Additionally, it is possible to figure out the flow of all the materials loaded on the RFID pallet; product, material, raw material immediately, so that epoch-making management is possible and it contributes to the reduction of logistics cost because there are little loss or outflow of pallet. The materials flow is getting speedy and inventory is decreasing in the logistics process, and also bad inventory and loss problems are prevented. As a result, not only logistics cost of company but also national logistics cost is decreased. Thus it contributes to the strength of national competitiveness.

The purpose of this study was to investigate the preference on Korean food and the nutritional knowledge of the college students. Self-administrated questionnaires were completed by 556 college students majoring food-related subjects in Kangwon-do area. The results were as fellows : 1. Male subjects liked meat (Calbi, Bulgogi, Seolungtang) and female subjects liked Kimchi and soybean soup. Both genders, however, disliked seasoned vegetables. 2. In the frequency of taking, Kimchi had the highest rank followed by Bibimbab and Seolungtang in higher order. 3. The first choice of both family and friends eating out was Korean foods. 4. The top two reasons for selecting Korean foods were their deliciousness and availability in higher order. 5. According to this study, the establishment of standardized recipe and the different way of facing Korean foods of individuals (Koreans) are promptly required for the globalization of Korean foods. 6. The nutritional knowledge of the subjects were limited and restricted to simple facts regardless of their major.

최근 새로운 행정수도의 이전이 예상된 남한 중부 충청지방에 대한 관심이 고조되고 있다. 우리는 이 지역에서 1996년 9월 이후 한국교원대학교 지진관측망을 설치하석 운영 중이며, 이 관측망 중 2개 관측소에서 기록된 60개의 지진자료를 바탕으로 확장 Coda 규격화법을 이용하여 QP-1 과 QS-1을 동시에 측정하였다. 부족한 자료를 보충하기 위해서 한국지질자원연구원 관측망 중 한국교원대학교 관측망과 지리적으로 인접한 1개의 관측소에서 기록된 33개의 지진자료도 함께 분석하였다. 측정된 QP-1은 (1.9±3.0)×10-3에서 (5.4±1.5)×10-4으로, QS-1은 (2.4±1.4)×10-3에서 (6.3±1.1)×10-4으로 주파수가 3.0Hz에서 24Hz로 늘어남에 따라 줄어드는 주파수 의존적 특성을 보인다. 이 값을 주파수의 지수형태로 나타내면 QP-1=0.003f-0.62, QS-1=0.006f-0.071이다. 이 값들은 지진학적으로 안정한 전 세계의 다른 지역의 값과 유사하며 남한 남동부 지역값에 비해서는 다소 약한 주파수 의존을 나타낸다. 이는 고주파수에서 높은 Q-1값 때문이다. 남한 남동부와 충청 동부지역 간의 Q-1의 차이를 평가하기 위해서는 보다 많은 관측이 요구된다.

Unit Load System could be realized with container and pallet, but management with On-Line Real Time was not selected yet in Korea companies. Therefore it is needed to introduce Unit Load System by pallet putting information technology being developed to practical use under One-Line Real Time management and RFID pallet pool system. It would innovate logistics management and contribute a lot to the advanced logistics information system. Additionally, it is possible to figure out the flow of all the materials loaded on the RFID pallet; product, material, raw material immediately, so that epoch-making management is possible and it contributes to the reduction of logistics cost because there are little loss or outflow of pallet. The materials flow is getting speedy and inventory is decreasing in the logistics process, and also bad inventory and loss problems are prevented. As a result, not only logistics cost of company but also national logistics cost is decreased. Thus it contributes to the strength of national competitiveness.

Median frequency can be regarded as a valid indicator of local muscle fatigue. As local muscle fatigue develops, the muscle fiber conduction velocity decreases, the fast twitch fibers are recruited less, and consequently the median frequency shifts toward the lower frequency area. The aim of this study was to test the characteristics of the median frequency according to exercise load (30% and 60% of MVC on the biceps brachii, 40% and 80% of MVC on the vastus lateralis) during the fatiguing isometric exercise. Thirteen healthy male volunteer students of Yonsei University were recruited. After the testing maximal voluntary isometric contraction, three variables (initial median frequency, regression slope, fatigue index) from the regression line of MDF data were measured in each exercise load. The results showed that the regression slope and fatigue index were significantly different for the biceps brachii, but not for the vastus lateralis initial MDF was not significant difference according to the exercise load on both muscles. The regression slope and fatigue index could monitor physiologic muscle change during fatiguing isometric exercise. The results showed that two MDF variables reflect the local muscle fatigue according to the exercise load.

Solar radio astronomy is about to undergo a revolution with the advent of a new radio synthesis array, the Frequency Agile Solar Radiotelescope (FASR). The array will consist of more than 100 antennas (5000 baselines), and will be designed to meet the special challenges of solar imaging. It will produce high-quality images at hundreds of frequencies in the range 20 MHz-24 GHz. We briefly describe the plans for the instrument, and then concentrate on the range of science that is expected to be addressed, using current state-of-the-art solar radio observations and modeling to illustrate FASR performance. We end with an assessment of the current status of the instrument, and plans for future.

Using a developed high-frequency induction heated combustion method. the simultaneous synthesis and densification of WC-xvol.%Co() hard materials was accomplished using elemental powders of W, C and Co. A complete synthesis and densification of the materials was achieved in one step within a duration of 1min. The final relative densities of the composite were over 98.5% for all cases, under the applied pressure of 60 MPa and the induced current. The hardness of the composites decreases and the fracture toughness increases with increasing cobalt content. As the carbon to tungsten ration increases, the hardness increase, but the fracture toughness decreases. The maximum values for the fracture toughness and hardness are 15.1 (at 20vol.%Co, W:C=1:1), and 1928 (at 5vol.%Co, W:C=1:1.3), respectively. Therefore we concluded that the HFIHCS method. which can produce WC-xvol.%Co within 1 minute in one step is superior to conventional ones.

1) Using a developed high-frequency induction heated sintering method, the rapid densification of WC-Co hard materials was accomplished using ultra fine powders with 260 nm size within 1 minute. 2) The relative density of the composite was 99.5% for the applide pressure of 60MPa and the induced current for 90% output of total capacity. 3) The grain size of WC-Co hard materials is about 260nm and the average thickness of the binder phase determined is about 11nm. The fracture toughness and the hardness of this work 12 , respectively. 4) Using pressureless sintering, we produced dense WC-Co hard materials with a relative density of 97% without applying pressure.

본 논문에서는 중고주파수 영역에서 진동하는 단순평판의 진동을 해석하기 위하여 파워흐름유한요소법을 적용하였다. 파워흐름해석법에서 주어지는 진동 에너지지배방정식의 해를 구하기 위한 수치해석 도구로써 유한요소법을 활용하였다. 이러한 파워흐름유한요소법을 적용하여 중고주파수 영역에서 진동하는 단순평판의 진동 변위와 진동인텐시티 분포를 구하였다. 또한 수치해 결과를 엄밀해와 유한요소법에 의한 근사해와 비교함으로써, 파워흐름유한요소법은 중고주파수 영역에서 진동 변위 및 진동 인텐시티를 예측하기 위하여 효과적으로 적용될 수 있음을 보였다.