Seismic designs for Korean nuclear power plants (NPPs) under earthquakes’ design basis are noticed due to the recent earthquake events in Korea and Japan. Japan has developed the technologies and experiences of the NPPs through theoretical research and experimental verification with extensively accumulated measurement data. This paper describes the main features of the design-time history complying with the Japanese seismic design standard. Proper seed motions in the earthquake catalog are used to generate one set of design time histories. A magnitude and epicentral distance specify the amplitude envelope function configuring the shape of the earthquake. Cumulative velocity response spectral values of the design time histories are compared and checked to the target response spectra. Spectral accelerations of the time histories and the multiple-damping target response spectra are also checked to exceed. The generated design time histories are input to the reactor building seismic analyses with fixed-base boundary conditions to calculate the seismic responses. Another set of design time histories is generated to comply with Korean seismic design procedures for NPPs and used for seismic input motions to the same reactor containment building seismic analyses. The responses at the dome apex of the building are compared and analyzed. The generated design time histories will be also applied to subsequent seismic analyses of other Korean standard NPP structures.

The reliability of the lifting system has to be ensured so that heavy cargo is handled safely during loading and unloading. Therefore, the accelerated life test was performed on the lifting bow shackle, which is highly affected by the main failure mode, among the components of the lifting system. Besides, an efficient inspection method was suggested for the preventive maintenance of the bow shackles. The acceleration index and acceleration coefficient of the bow shackles were calculated by using the life data of them. The guaranteed life data of the bow shackle can be used to predict the useful life in industries related to lifting work.

국내 연안의 카페리선박의 고박안전성은 화물의 중량과 적재된 위치에서 발생할 수 있는 선체가속도를 기반으로 한 작용 외력과 고박장치의 고박력 비교를 통해 평가하고 있다. 고박안전성 평가에 기본이 되는 국내 기준상의 선체가속도는 선박의 특성 및 항해조건 의 반영이 없이 적용되고 있다. 본 연구에서는 국내 연안 카페리선박의 선체가속도를 분석하고자 부산-제주를 통항하는 DWT 6,800톤급 선속 15.5 knots의 선박을 기준으로 선체의 4개 지점에서 총 12회의 가속도 계측을 수행하였고, 항해구역 인근 기상관측 부이의 데이터를 수집하였다. 한정된 계측 결과에 대한 이론적 비교 분석을 위하여 수치 시뮬레이션을 통하여 주파수 응답 해석을 통한 RAO를 해석하였고, RAO 결과를 바탕으로 4개 지점에 대한 가속도 해석을 수행하였다. 가속도 비교 결과 위치별 정도의 차이는 있으나 Y축 가속도의 경우 해석 1.81 m/s2, 계측 1.47 m/s2로 해석 시뮬레이션 결과가 0.34 m/s2 높게 분석되었고, 고박안전성 평가기준 8.59m/s2와 비교해 볼 때 해석은 22 % 수 준, 계측은 18 % 수준으로 분석되었다.

사용후핵연료를 저장하는 볼트체결 저장용기의 격납경계를 형성하는 주된 구성요소는 금속 밀봉재이다. 이러한 금속 밀봉 재는 열과 방사선에 의해 그 성질이 저하된다. 또한, 금속 밀봉재가 강한 열에 장기간 노출되면 크리프 현상이 발생한다. 이러한 크리프는 밀봉시스템에 응력 이완을 가져와서, 결국 밀봉재의 건전성을 해치게 된다. 이러한 응력 이완은 금속 밀봉재의 밀봉성능 저하로 이어지며, 저하의 정도에 따라 저장용기의 누설을 야기할 수 있다. 또한, 볼트 체결력의 감소도 밀봉성능 저하에 영향을 미친다. 본 논문에서는 금속 밀봉재의 격납건전성과 볼트체결력 감소를 평가하기 위해 수행한 가속화 시 험의 결과에 대하여 기술한다. 전 시험기간 동안 각 시편에서의 누설률, 볼트 변형률, 금속 밀봉재 주변 온도를 계측하여 분석하였고, 금속 밀봉재는 저장기간 50년 동안 격납건전성을 유지함을 입증하였다. 또한, 가속화 시험의 타당성에 대해서 기술하였다.

변전소 구조물 내부에 설치되는 전력설비의 내진설계 시 사용되는 변수인 가속도 증폭계수는 미국, 일본과 국내의 변전소 내진설 계기준에서 제시되어 있다. 국내 설계기준에 제시된 가속도 증폭계수는 미국, 일본의 설계기준에서 제시된 계수와는 달리 변전소 구조물의 층수가 4층 이상일 경우에는 동적해석을 수행하여 가속도 증폭계수를 구하게 되어 있다. 국내의 변전소 구조물은 대부분 층수가 4~5층이므로 기존의 가속도 증폭계수는 실제 변전소 구조물에 적용하기에 미흡한 상황이다. 국내 변전소 구조물 형식에 적합한 가속도 증폭계수를 제시하기 위하여 대표적인 7가지 구조형식의 변전소 구조물에 대하여 가속도 증폭계수를 평가하였다. 가속도증폭 계수는 변전소 구조물에 대하여 원거리 지진과 근거리 지진을 사용하여 내부-구조물 응답스펙트럼을 작성하여 이로부터 평가하였다. 미국, 일본 전력설비 내진설계 기준에 따른 각각의 가속도 증폭계수 αj, αA는 근거리 및 원거리 지진을 사용한 동적 해석으로 구한 가 속도 증폭계수에 비하여 다소 과대평가하는 경향이 있다.

관내에서 이동하는 물체 주위의 유동에 대한 연구는 대부분 비정상상태가 아닌 정상상태의 종단속도 조건 하에 이루어져있 으므로 이에 대한 유체역학적 분석이 요구되고 있다. 이에 본 연구에서는 다양한 직경의 원통형 관 안에서 9.81m/s2으로 비정상 등가 속 운동을 하는 3D 구에 작용하는 힘을 전산유체역학을 이용하여 분석하였다. 유한 체적 기반 CFD 코드 인 Fluent 19.0을 사용하였으 며, 상대 운동 프레임과 난류 모사를 위한 SST k-ω 모델을 적용하였다. 선행연구 결과와의 비교를 통해 본 연구의 해석방법이 타당함 을 보이고 있다. 또한 후류 분석을 통하여 항력 변화를 설명하고, 벽면효과에 의한 항력 증가를 정량적으로 분석하였다.

PURPOSES : This study investigates the abrasion characteristics of coarse aggregate using the Los Angeles (L.A.) abrasion test and the accelerated polishing machine (APM) test. The coarse aggregates are randomly exposed on the surface of asphalt concrete pavements and on exposed aggregate concrete pavements. The exposed aggregates play a very important role in providing skid resistance. Therefore, the adequate abrasion resistance of coarse aggregate must be ensured to maintain the skid resistance during service life. In Korea, the LA abrasion test is conducted according to the KS F 2508 standard for the evaluation of the abrasion resistance of coarse aggregate. However, the road surface abrasion is caused by the friction between the tire and the road surface structure; hence, whether the LA abrasion test, which evaluates the abrasion caused by the impact of coarse aggregates and steel balls, can evaluate the road surface abrasion is questionable. A comparison and an analysis between the APM and LA abrasion tests were conducted herein to evaluate the road abrasion. An analysis was also performed to analyze whether the abrasion characteristics appeared depending on the type of coarse aggregate. METHODS: The results of the APM and LA abrasion tests for various aggregate types were obtained through a series of experiments and literature reviews. The correlation between the LA abrasion loss and the PV data was derived. In addition, the influence of the aggregate type on the abrasion resistance was investigated. RESULTS : An abrasion resistance database was established, and the relationship between the rock types and the abrasion resistance was statistically determined. The results showed that the PV was increased to 0.54 along with a 1% increasing rate of the LA abrasion loss with a 0.67 coefficient of determination. The abrasion resistance was also influenced by the aggregate type, which was found to be statistically significant. CONCLUSIONS: A good relationship between the PV and the LA abrasion loss was obtained, allowing the use of the LA abrasion test (KS F 2508) alone, to reasonably evaluate the abrasion resistance of the exposed aggregate texture. The aggregate types were also found to have an impact on the abrasion resistance.

최근 지진가속도 계측기의 활용성에 대하여 많은 관심이 대두되고 있다. 하지만 계측데이터를 활용하지 않거나 최대 가속도 데이터만 이용하고 있는 실정으로 계측한 데이터의 활용을 위한 방안 마련이 필요하다. 따라서 본 연구에서는 지진가속도계측기 설치대상 구조물 중 사장교의 지진가속도 계측자료를 활용한 교량의 긴급 안전성평가 방법에 대하여 조사하고, 대상 교량을 선정하여 최근 연구동향 중 대표적인 3가지 안전성평가 기법을 적용하여 적용의 문제점과 개선사항에 대하여 분석하였다. 분석결과 첫째로 변위를 통한 안전성평가에서는 계측 지점의 변위산출에서 장주기 특성이 오차를 증가시키는 경향을 확인하였다. 둘째로 통계지표를 통한 안전성 평가를 통해서 표준편차의 증가에 따라 첨도가 일정하게 유지되는 특성을 확인하였고, 이를 활용하여 차량통행이 많은 주간시간에 첨도를 활용한 안전성 평가가 가능할 것으로 분석하였다. 마지막으로 고유주기 변화를 통한 안전성 평가는 계절적인 요인으로 고차모드에서 고유주기 변화가 크게 나타나는 특성을 확인하였고, 1차 모드의 고유진동수를 통해서 구조물의 손상을 평가할 수 있을 것으로 분석하였다.

PURPOSES : The purpose of this study is to evaluate the performance of road stone block pavements using APT (Accelerated Pavement Testing), which can evaluate the short-term pavement performance of a pavement structure for a given traffic load. METHODS : The performance of stone block, concrete block, and asphalt (modified SMA) pavements were evaluated according to the cumulative equivalent load by using APT. The FWD (Falling Weight Deflectometer) test was used to analyze the deflection per unit load. In addition, the plastic settlement was analyzed by transverse profile measurement. RESULTS: The results of the APT of about 197,000 ESALs (Equivalent Single Axle Loads) show that there were no damages in the stone block, concrete block, and asphalt pavement, such as breakage of stone or concrete block, cracking of asphalt, deflection, and plastic settlement of the wheel-pass section. It was analyzed that the bearing capacity of each pavement section did not decrease sharply with increase in cumulative ESAL. The results of plastic settlement analysis show that in the case of asphalt pavement, the plastic settlement steadily progressed from the beginning of the APT, and a settlement of about 4.76 mm occurred. In the case of concrete block and stone block pavements, no significant change occurred after the initial stabilization step, and plastic settlement of about 1.01 mm and 0.17 mm occurred for the concrete block and stone block pavements, respectively. CONCLUSIONS : As a result of the analysis of the bearing capacity and plastic settlement after the APT, the performance of stone pavement was found to be similar to that of asphalt pavement and concrete block pavement. Therefore, it is concluded that stone pavements are applicable for the road pavement system.

가속도로부터 변위를 계산 방법 중 상대적으로 사용이 간단한 변위재구성기법이 Lee et al.(2010)과 Hong et al.(2010)에 의해 제안되었다. 목표주파수는 변위재구성기법을 사용할 때 사용자가 결정해야 할 중요한 변수 중 하나로 이것을 결정하기 위해선 주파수영역 분석에 대한 경험이 필요하다. 이 논문은 지진하중을 받는 사장교에 한정된 변위재구성기법의 목표주파수 결정 방법을 제시한다. 사장교가 지진에 의해 가진될 경우 목표주파수는 유효한 모드의 고유주파수 중 가장 낮은 주파수로 결정된다. 여기서 유효한 모드라 함은 가속도의 자유도에 유의미한 영향을 주는 모드형상을 가진 모드를 의미한다. 제안된 목표주파수 결정방법의 타당성을 검증하기 위해 포항지진 발생 당시 측정된 3개 실 교량의 주경간 중앙에서 측정된 가속도와 변위 시간이력을 분석했다. 또한 제안된 방법을 포항지진 발생 당시 측정된 실교량의 주탑 상단 가속도에 적용해 계산된 변위를 분석했다.

Severe wall thinning is found on the tube of a low-pressure evaporator(LPEVA) module that is used for a heat recovery steam generator(HRSG) of a district heating system. Since wall thinning can lead to sudden failure or accidents that lead to shutdown of the operation, it is very important to investigate the main mechanism of the wall thinning. In this study, corrosion analysis associated with a typical flow-accelerated corrosion(FAC) is performed using the corroded tube connected to an upper header of the LPEVA. To investigate factors triggering the FAC, the morphology, composition, and phase of the corroded product of the tube are examined using optical microscopy, scanning electron microscopy combined with energy dispersive spectroscopy, and x-ray diffraction. The results show that the thinnest part of the tube is in the region where gas directly contacts, revealing the typical orange peel type of morphology frequently found in the FAC. The discovery of oxide scales containing phosphate indicates that phosphate corrosion is the main mechanism that weakens the stability of the protective magnetite film and the FAC accelerates the corrosion by generating the orange peel type of morphology.

The model predictive controller performance of the mobile robot is set to an arbitrary value because it is difficult to select an accurate value with respect to the controller parameter. The general model predictive control uses a quadratic cost function to minimize the difference between the reference tracking error and the predicted trajectory error of the actual robot. In this study, we construct a predictive controller by transforming it into a quadratic programming problem considering velocity and acceleration constraints. The control parameters of the predictive controller, which determines the control performance of the mobile robot, are used a simple weighting matrix Q, R without the reference model matrix Ar by applying a quadratic cost function from which the reference tracking error vector is removed. Therefore, we designed the predictive controller 1 and 2 of the mobile robot considering the constraints, and optimized the controller parameters of the predictive controller using a genetic algorithm with excellent optimization capability.

Background: At present time, smartphones have become very popular and powerful devices, and smartphone applications with the good validity have been designed to assess human balance ability. Objects: The purpose of this study is to evaluate the feasibility of smartphone acceleration in the assessment of postural control ability for six different conditions. Methods: Twenty healthy college-aged individuals volunteered. Static balance ability was measured twice with one-day interval using smartphone application and 3D motion capture system under the six different conditions. Results: Dominant frequencies for each test condition did not show significant differences except for two conditions. The intra-rater correlation coefficient between the first and second tests showed high correlations in six conditions(r>.70, p<.05). Smartphone acceleration and the acceleration calculated from the 3D marker position data showed high correlation coefficient(r>.80, p<.001). Conclusion: Acceleration recorded from a smartphone could be useful assessment variables for balance test in the clinical field.

The main function of the general hospital building is to provide medical facilities and service. However, damage to the non-structural elements such as architectural, medical, mechanical and other components will interrupt those functions after the earthquake. Especially, it is considered that, damage to the non-structural elements is a serious event because it is directly associated with the lives of patients. Therefore, this study evaluated whether the certain non-structural elements of general hospital building has the seismic performance to provide hospital medical services after the earthquake. The evaluation is conducted by selecting the non-structural elements used in general hospital which are sensitive to acceleration, such as cooling towers, air handler, MRI and CT. As a result, the non-structural elements located on the upper floor without suitable support method did not meet the performance objective. Therefore, adequate anchorage against the seismic event is required for such non-structural elements that are acceleration-sensitives.

This study develops an empirical prediction equation of spectral acceleration responses of earthquakes which can induce structural damages. Ground motion records representing hazards of low-to-moderate seismic regions were selected and organized with several influential factors affecting the response spectra. The empirical equation and estimator coefficients for acceleration response spectra were then proposed using a robust nonlinear optimization coupled with a regression analysis. For analytical verification of the prediction equation, response spectra used for low-to-moderate seismic regions were estimated and the predicted results were comparatively evaluated with measured response spectra. As a result, the predicted shapes of response spectra can simulate the graphical shapes of measured data with high accuracy and most of predicted results are distributed inside range of correlation of variation (COV) of 30% from perfectly correlated lines.