Over the past few decades, many scientists and environmental activists emphasized the importance of sustainable society and warned the global warming. As one of efforts to achieve the sustainable society and maintain no more of global warming, the RDF (Refuse Derived Fuel) production from domestic solid is taken into account seriously in Daejeon, Korea. Currently, the pay per throw system is active from 1995 and is quite stabilized. Recyclable wastes such as metal scraps, glass, papers, and fibers like clothes should be discarded separately and not be mixed with other types of waste being disposed of eventually. To assess the potential for the conversion of domestic solid waste into a heat source, i.e., RDF, the proximate analysis, the classification into 10 components, and the calculation of heat value based on the result of the elemental analysis were performed. Based on the preceding analysis, the domestic solid waste produced daily in Daejeon, Korea has a potential for conversion into an alternative energy source, RDF in technical aspect. Proper blending of combustibles, however, is necessary to enhance the heating value of RDF being produced and to be more viable in economic aspect.

For utilization of Electric Arc Furnace Slag’s high added value, KS F 4571 was revised, so the institutional environment to use concrete aggregate was prepared. But, it has hardly been reported how much the slag occurring in actual steel-making plants meets KS requirements. Therefore, this study was intended to analyze various engineering features of electric arc furnace slag, which occur in diverse kinds of electric arc furnace process to manufacture reinforcing rebar, hot roll, and shape steel, in accordance with KS and relevant standards. The test results from this study showed that electric arc furnace slag occurring in Korea didn’t meet the standards relating to many physical properties, such as water absorption, grading, unit volume weight, and material passing standard sieve 0.08 mm which are required for concrete aggregate and are prescribed in KS F 4571, and therefore that something is needed to be improved. Regarding chemical properties, heavy metal solubility based on official wastes test method, CaO and FeO were met, but content of MgO related to expansion and basicity exceeded or came close to standards. Therefore, it was found that some measures should be taken to address the issue.

This study assessed the characteristic of BTEX (Benzene, Toluene, Ethylbenzene, Xylene) concentration ratios of industrial emission sources and the neighborhoods of industrial area, fuel such as gasoline, light oil, LPG, and similar gasoline, and ambient air in Daegu. The BTEX in aromatic compounds was the most abundant VOC in Daegu. The BTEX ratios were (0.2:2.6:1.0:1.8) for the neighborhoods of industrial area, (2.6:11.3:1.0:1.2) for residential area, (2.2:11.0:1.0:1.6) for commercial area, (1.0:14.9:1.0:1.3) for industrial area, and (0.2:2.6:1.0:1.8) for the neighborhoods of industrial area. Average BTEX ratios in Daegu were B/T ratio (0.1), B/EB ratio (1.5), B/X ratio (1.1), T/EB ratio (12.6), T/X ratio(10), EB/X ratio (0.7). Expecially, B/T ratio in Daegu was similar as the other cities, Bangkok, Manila, and Hongkong. Comparing other cities with B/T ratio, the main sources of VOC were vehicular exhaust and emission of industrial facilities. Furthermore, BTEX correlation were evaluated at the emission sources and regional areas. Results showed that correlation coefficient values of emission sources, fuels and neighborhood of industry were significant magnitude above 0.65(p<0.01). Also, there showed highly significant correlations among BTEX. Calculated correlation coefficients of ambient air sampling sites were 0.61～0.954 for commercial /residential area and 0.613～0.998 for industrial area. However, they showed different correlation between commercial/residental area and industrial area. It implied that the emission sources were different from each area.

The numerical modeling and comparison with observations are performed to find out the detailed structure of meteorology and the characteristic of related dispersion phenomena of the non-reactive air pollutant at Kyoungin region, South Korea, where several industrial complex including Siwha, Banwol and Namdong is located. MM5 (Fifth Generation NCAR/Penn State Mesoscale Model), 3-D Land/Sea breeze model and 3-D diagnostic meteorological model have been utilized for the meteorological simulation for September, 2002 with each different spatial resolution, while 3-D Eulerian air dispersion model for the air quality study. We can see the simulated wind field shows the very local circulation quitely well compared with in-site observations in shoreline area with complex terrains, at which the circulation of Land/Sea breeze has developed and merged with the mountain and valley breeze eventually. Also it is shown in the result of the dispersion model that the diurnal variation and absolute value of daily mean SO2 concentrations have good agreement with observations, even though the instant concentration of SO2 simulated overestimates around 1.5 times rather than that of observation due to neglecting the deposition process and roughly estimated emission rate. This results may indicate that it is important for the air quality study at shoreline region with the complex terrain to implement the high resolution meteorological model which is able to handle with the complicate local circulation.

Indoor air quality has been addressed as an important atmospheric environmental issue and has caught attention of the public in recent years in Korea. Good indoor air quality in classrooms favour student's learning ability, teacher and staff's productivity according to other studies. In this study, each classroom at four different schools was chosen for comparison of indoor and outdoor air quality by means of source generation types such as new constructed classroom, using of cleaning agents and purchased furniture. Temperature, relative humidity (RH), carbon dioxide (CO2), formaldehyde (HCHO), total volatile organic compounds (TVOCs) and particulate matter with diameter less than 10 ㎛ (PM10) were monitored at indoor and outdoor locations during lesson. HCHO was found to be the worst among parameters measured in new constructed classroom, HCHO and TVOCs was worst in classroom with new purchased furniture, and TVOCs was worst in classroom cleaned by cleaning agents. Indoor CO2 concentrations often exceeded 1500 ppm indicating importance of ventilation. Active activity of students during break time made the PM10 concentration higher than a lesson. Improvements and further researches should be carried out considering indoor air quality at schools is of special concern since children and students are susceptible to poor air quality.

In recent days, photochemical smog due to the rapid industry development and vehicle increasement has become a critical pollutant in the metropolitan area and the number of ozone alarm signal has increased every year. This research was performed to evaluate VOCs emission source characteristics and concentration of VOCs in Daegu. The site average concentration was observed in the following order : industrial area > commercial area > residential area. Most of the VOCs species except toluene showed variations with higher concentration during nighttime, and lower concentration during the daytime. The major VOCs of stationary emission source were BTEX(benzene, toluene, ethylbenzene, xylene) and methylene chloride, trichloroethene and styrene. Also, those of automobile exhaust were toluene and benzene. Also, the major VOCs concentration emited by the vehicle fuel was observed in the following order : gasoline > light oil > liquefied petroleum gas (L.P.G). Correlation coefficients values were estimated between major VOCs such as toluene, ethylbenzene, m,p-xylene, o-xylene. Results showed that correlation coefficient values were significant magnitude above 0.76. Also, there showed highly significant correlations among ethylbenzene, m,p-xylene, and o-xylene concentration(Pearson correlation coefficients, r= 0.868～0.982). Calculated correlation coefficients among commercial area, industrial area and residential area were 0.934～0.981, they showed high correlation. There showed highly correlation between stationary emission source and industrial area, compared with commercial area and residential area. Also, calculated correlation coefficients among commercial area, industrial area, residential area and automobile exhaust were 0.732, 0.725, 0.777, respectively.

Suspended sediment outflows mainly by natural situation and artificial action and affects in down-stream. This research studied suspended sediments origination in forests size and mountain stream for natural situation, density for artificial action, and measured the size and possible quantity of suspended sediments origination and studied obstruction method of the generation by artificial action. As the result, I found that the size of generation is about 2～3% of forest size and the forest size which is affecting bare area of valley is about 1～2ha. In addition, possible outflow segments quantity by artificial facilities is assumed to be maximum 200ton/ha and abstract of mountain incline for mountain development needs minimize bare area valley by make right angle with minimum size.