Cu matrix composites reinforced with chopped carbon fiber (CF), which is cost effective and can be well dispersed, are fabricated using electroless plating and hot pressing, and the effects of content and alignment of CF on the thermal properties of CF/Cu composites are studied. Thermal conductivity of CF/Cu composite increases with CF content in the in-plane direction, but it decreases above 10% CF; this is due to reduction of thermal diffusivity related with phonon scattering by agglomeration of CF. The coefficient of thermal expansion decreases in the in-plane direction and increases in the through-plane direction as the CF content increases. This is because the coefficient of thermal expansion of the long axis of CF is smaller than that of the Cu matrix, and the coefficient of thermal expansion of its short axis is larger than that of the Cu matrix. The thermal conductivity is greatly influenced by the agglomeration of CF in the CF/Cu composite, whereas the coefficient of thermal expansion is more influenced by the alignment of CF than the aggregation of CF.

In recent, fiber-reinforced composites have been widely used in many fields because of their excellent performance. In order to manufacture lightweight, high-performance, and inexpensive composites various laminated structures were designed. Six types of hybrid composites were fabricated with glass/basalt/aramid fibers by VARTM process. The effect of the laminated structure on the mechanical properties of composites was investigated through impact energy, tensile and bending strength. Compared to other conditions more higher impact energy was obtained when the aramid fibers were in the center position and more higher bending strength was obtained when the fibers are laminated in the order of increasing bending performance from top to bottom. The laminate structure did not affect tensile strength which mainly depends on the property of fibers.

The most important factor in the processing of composite materials is the creation of burrs. In order to minimize the generation of burrs, the preceding researchers changed the shape and processing conditions of the tool. The developed composite material using carbon and aramid fibers has limitations in reducing the formation of burrs. In this study, in order to solve this problem, by applying a jig under the test piece during drilling, it was possible to perform high-quality hole processing with minimal burr generation.

This study developed a flame-retardant fiber-reinforced composite material that satisfies the required regulations of railway vehicle interior parts for the purpose of reducing weight and simplifying the production process using SMC(sheet molding compounds) composite materials. It is essential to secure flame-retardant performance that minimizes flames and smoke for the safe evacuation of passengers in case of fire for interior parts of railway vehicles. In this study, the resin for SMC was developed by adding various flame retardant materials such as vinyl ester (halogen-based and phosphorus-based) and antimony trioxide, and chopped glass fibers were used as the reinforcing material. As a result of preparing specimens for phosphorus-based and halogen-based SMC materials, and comparing the flame retardant performance, the phosphorus-based SMC material had an oxygen index of 36.1, smoke density (1minute 30 seconds, 4minutes, 10minutes) of 1.7, 51.5, 195.1. It was measured with a toxicity index of 0.05 R and average heat for sustained burning of 4.5MJ/m, which satisfies all the flame retardant standards required for interior parts of railway vehicles, and it was found that most of the performance was better than that of halogen-based SMC.

본 논문에서는 Needle-punched C/SiC 복합재료 해석을 위한 효율적인 멀티스케일 해석기법을 소개한다. 기존 Needle-punching으 로 인해 복잡한 미소구조를 갖는 NP 복합재료는 기존의 제안된 복합재료 멀티스케일 기법으로 물성을 계산하는 것은 한계가 있어 왔다. 이를 극복하기 위해 micro-CT 이미지 촬영을 통해 NP 복합재료의 미소구조를 면밀히 파악할 수 있었고, 이미지 프로세싱을 바탕으로 실제구조와 직접적으로 대응할 수 있는 3D high fidelity 모델을 구축하였다. 또한 유한요소해석에 맞춰 요소크기를 조절할 수 있는 sub-region processing 소개를 바탕으로 효율적인 유한요소해석을 수행하였다. NP 복합재료의 미소구조 거동뿐만 아니라, macro-scale 구조해석의 적용을 위해 subcell 모델링을 제안하였다. Needle-punching에 의한 Z축 NP 섬유의 규칙적인 간격을 이용하여 모델링을 수행할 수 있었다. 제안한 두 종류의 모델은 균질화 기법을 이용하여 등가거동 및 등가물성을 파악하였으며, 추가적인 실험 결과와의 비교를 통해 검증을 수행하였다.

In this research, carbon nanotubes(CNT) and graphene nanoplates(GnP) are deposited on the surface of carbon fibers(CF) at once. Investigating the effect between CNT and GnP on increasing the interfacial and mechanical properties of carbon fiber reinforced epoxy composites(CFRP). The cross section of the CFRP composites indicates that the GnPs/CNTs hybrid coating exhibits significantly higher mechanical performance in all coating samples. The interlayer shear strength of the GnPs/CNT hybrid coated CFRP composite was 90% higher than that of the uncoated CF composite. The flexural and tensile strength of CFRP composites using GnPs /CNT hybrid coatings were improved by 52% and 70%, respectively, compared to uncoated CF.

본 연구에서는 다공성 활성탄소와 금속유기골격체 복합재료 기반의 전극 재료와 “이온젤” 이라고 불리는 고분자 고체 전해질을 이용하여 슈퍼커패시터를 제작 하였으며, 금속유기골격체의 함량에 따른 전기화학적 거동을 관찰하여 보았다. 슈퍼커패시터의 전기화학적 특성은 순환전압전류법(CV), 전기화학적 임피던스 분광법(EIS) 및 전정류 충·방전법(GCD)으로 분석하였으며, 그 결과로, 다공성 활성탄소 대비 금속유기골격체를 0.5 wt% 첨가 하였을 때 가장 높은 전기용량값을 확인 할 수 있었으며, 0.5 wt% 이상의 금속유기골격체의 함유량은 전기화학적 특성 감소에 영향을 주는 것으로 사료되며, 이러한 결과를 바탕으로 제조된 다공성 활성탄소/금속유기골격체 복합재료 기반의 슈퍼커패시터는 다양한 분야에 활용이 가능 할 것으로 판단된다.

Conductive polymer composites with high electrical and mechanical properties are in demand for bipolar plates of phosphoric acid fuel cells (PAFC). In this study, composites based on natural graphite/fluorinated ethylene propylene (FEP) and different ratios of carbon black are mixed and hot formed into bars. The overall content of natural graphite is replaced by carbon black (0.2 wt% to 3.0 wt%). It is found that the addition of carbon black reduces electrical resistivity and density. The density of composite materials added with carbon black 3.0 wt% is 2.168 g/cm3, which is 0.017 g/cm3 less than that of non-additive composites. In-plane electrical resistivity is 7.68 μΩm and through-plane electrical resistivity is 27.66 μΩm. Compared with non-additive composites, in-plane electrical resistivity decreases by 95.7 % and through-plane decreases by 95.9 %. Also, the bending strength is about 30 % improved when carbon black is added at 2.0 wt% compared to non-additive cases. The decrease of electrical resistivity of composites is estimated to stem from the carbon black, which is a conductive material located between melted FEP and acts a path for electrons; the increasing mechanical properties are estimated to result from carbon black filling up pores in the composites.

In recent years, studies on various 3D scanner applications, including those on quality control and reverse engineering, have been conducted in the shipbuilding industry. Appropriate scanner selection, scanning environment setting by targets, and data postprocessing are essential for effective 3D scanning projects for small crafts. In this study, a non-contact handheld-type 3D scanner was used for molds and hull products for the 10– 30-ft class of small crafts. Small crafts have fewer geometric features and several glare surfaces; thus, anti-glare and texture feature addition preprocessing is critical. The 3D scanning results are used for geometry quality control of single panels and curved surfaces in craft hulls. Consequently, international rule-based weight estimation calculation sheets have been developed and applied for product weight quality control.

최근 국내 구조물들의 노후화가 진행됨에 따라 구조물 보강과 관련된 연구에 대한 관심이 높아지고 있다. FRP보강은 노후화가 진행되어 성능이 저하된 구조물을 보강하는데 사용되며 주로 유리섬유를 사용한다. 그러나 이 유리섬유는 환경적 재 활용의 문제점이 대두되고 있다. 따라서 본 연구에서는 친환경적이고 내열성이 우수한 현무암 섬유를 활용한 휨 보강 플레이트 적용방법과 기존 FRP 외부부착의 문제점을 해소하기 위하여 연성 코팅용 보강페인트를 활용한 휨 보강 페인팅 적용방법을 통하여 각각의 경우에 대한 3점 휨 시험을 통하여 보강성능을 평가, 비교하였다. 그 결과 BFRP 보강의 경우 무보강 시험체에 비하여 약 1.2배 높은 강성 값을 나타내었고 콘크리트-BFRP 계면 부착력에 의한 연성효과도 나타났다. 반면 연성 코팅 보강페인팅 적용을 통한 휨 보강의 경우, 무보강 시험체에 비하여 약간의 개선효과는 나타났으나 실험체 제작의 오차 등을 고려할 때 실질적인 보강효과는 크게 나타나지 않았다. 따라서 연성 코팅페인팅을 활용한 보강방법의 경우, 향후 다양한 시공조건에 따른 추가연구가 필요할 것으로 판단된다.

본 연구에서는 “이온젤” 이라고 불리는 고분자 기반의 PVA(polyvinyl alcohol) 기반의 고체 전 해질에 이온성 액체 BMIMBF4 (1-buthyl-3-methylimidazolium tetrafluoroborate)를 첨가하여 제조한 전 고체 전해질과 활성탄소와 금속유기골격체 복합재료 기반의 전극 재료를 이용하여 슈퍼커패시터를 제작 하였으며, 유기골격체의 유 무에 따른 전기화학적 특성을 분석하여 보았다. 슈퍼커패시터의 전기화학적 특 성은 순환전압전류법(CV), 전기화학적 임피던스 분광법(EIS) 및 전정류 충·방전법(GCD)을 통하여 비교 및 분석하여 보았다. 그 결과로, 금속유기골격체가 함유되지 않은 슈퍼커패시터의 전기용량값은 380 F/g 으로 확인 할 수 있었고, 이 값은 금속유기골격체를 첨가하였을 때 340 F/g로 감소하는 현상을 확인할 수 있었 다. 이러한 결과로 1 wt%의 금속유기골격체의 함유량은 전기화학적 특성 감소에 영향을 주는 것으로 사료 되며 이러한 결과를 바탕으로 금속유기골격체의 첨가량을 최적화 할 필요가 있다고 판단된다

Metal matrix composites (MMCs), which are a combination of two or more constituents with different physical or chemical properties, are today receiving great attention in various areas, as they have high specific strength, corrosion resistance, fatigue strength, and good tribological properties. This paper presents a research review on the combination of matrix and reinforced materials, fabrication processes, and application status of metal matrix composites. In this paper, we aim to discuss and review the importance of metal composite materials as advanced materials that can be used in various applications such as transportation, defense, sports, and extreme environments. In addition, the applicability and technology development trends in new process technology fields such as additive manufacturing of metal composites will be described.

산업화와 기후 변화는 깨끗한 식수에 대한 수요 증가를 초래하였다. 막분리공정을 이용한 해수담수화는 물의 수요에 대한 요구를 채울 수 있는 경제적으로 실현 가능한 대안 중 하나이다. 막분리공정에서 2차원 재료들은 기존 역삼투분리막 (reverse osmosis membrane) 기반의 폴리아마이드 박막복합막(TFC-PA)과 비교하였을 때 막의 강도를 높여주고 투수성을 용이하게 하며 높은 염제거율 및 높은 선속률과 선택성을 보여준다. 이 리뷰 논문에서는 재료, 합성, 특징, 해수담수화 과정을 기반으로 다양한 2차원 재료로 구성된 복합막들을 소개하고 있다.