검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 64

        21.
        2018.10 서비스 종료(열람 제한)
        The present study investigates the material and hydration properties of nPOFA mixed cement mortar with early carbonation curing based on the fact that each process contributes to fill capillary pores, to enhance compressive strength and to reduce CO2. Mortar samples were carried out compressive strength test, phenolphthalein test, MIP testt and SEM. Pulverized cement paste was analytically characterized by XRD, TG/DTA, and FTIR analzes. The fabricated specimens were cured for 0,7, and 28 days in the carbonation chamber which set to carbon dioxide concentration of 5%
        22.
        2018.07 KCI 등재 서비스 종료(열람 제한)
        본 연구는 시멘트 모르타르속에 매입된 철근주위가 건조될 때 불안정한 전류분포의 영향을 측정하고, 교류 임피던스 특성변화에 대한 영향을 고찰하는 것을 목적으로 한다. 건조과정중 철근의 전기화학적 반응을 측정하기 위해, 두 개의 철근이 매입된 3개의 시멘트 모르타르가 실험을 위해 준비되었다. 주요 변수는 20mm 모르타르 두께를 동일하게 가지도록 하여, 두 철근사이의 간격이 10, 20과 30mm가 되도록 하였다. 해양환경에서 콘크리트 구조물속의 철근 부식속도를 가정하기 위해서, 3개의 모르타르 시험체는 15 사이클의 침지-건조환경(해수에서 24시간 침지와 48시간 실온 건조)에 노출되었다. 부식전위의 변화는 건조중에 용존산소의 확산속도 증가로 인해 귀한 방향으로 이동하는 것이 관찰되었다. 침지-건조환경에서 교류 임피던스는 100kHz에서 1mHz까지 측정되었다. 철근과 모르타르사이의 계면상태를 설명하기 위해 이론적 모델이 제안되었으며, 그것은 용액저항, 전하이동저항과 CPE로 구성된 등가회로를 사용하였다. 철근의 부식이 진행됨에 따라, 저주파수 영역에서 확산 임피던스가 나타났다. 침지-건조 환경중 건조과정에서 이송차가 45o에 가까워지는 현상으로써 전류분포가 불균일해지 는 경향을 보였다.
        23.
        2018.04 서비스 종료(열람 제한)
        This study is a basic review of the use of CGS generated in IGCC as a fine aggregate for concrete, and a basic feature of cement mortar was considered. The analysis shows that CGS and CS mix ratio is best when the CGS is mixed at about 0~50 % On the basis of workability and strength improvement effects. This is expected to contribute to the strength, workability, and quality improvement of concrete given the optimal mixing of CGS.
        24.
        2017.12 KCI 등재 서비스 종료(열람 제한)
        This research presents the results of the strength and drying shrinkage properties to study the effect of ground granulated blast furnace slag(GGBFS), fly ash(FA) and calcium sulfoaluminate(CSA) for activated ternary blended slag cement. The activated ternary blended cement(ATBC) mortar were prepared having a constant water-cementitious materials ratios of 0.4. The GGBFS contents ratios of 100%, 80%, 70% and 60%, FA replacement ratios of 10%, 20%, 30% and 40%, CSA ratios of 0%, 10%, 20% and 30% were designed. The superplasticizer of polycarboxylate type were used. The activator was used of 10% sodium hydroxide(NaOH) + 10% sodium silicate(Na2SiO3) by weight of binder. Test were conducted for mini slump, setting time, V-funnel, water absorption, compressive strength and drying shrinkage. According to the experimental results, the contents of superplasticizer, V-funnel and compressive strength increases with an increase in CSA contents for all mixtures. Moreover, the setting time, water absorption ratios and drying shrinkage ratio decrease with and increase in CSA. One of the major reason for the increase of strength and decrease of drying shrinkage is the accelerated reactivity of GGBFS with alkali activator and CSA. The CSA contents is the main parameter to explain the strength development and decreased drying shrinkage in the ATBC.
        25.
        2017.10 KCI 등재 서비스 종료(열람 제한)
        본 연구는 규산나트륨(Na2SiO3)으로 활성화된 고유동 대량치환슬래그 시멘트의 기초특성에 관한 연구이다. 고로슬래그 미분말 (GGBFS)은 보통포틀랜드 시멘트(OPC)의 40%에서 80%까지 질량치환하고 칼슘설포알루미네이트(CSA)는 2.5%와 5.0% 치환하였다. 규산나 트륨(Na2SiO3)은 전체 결합재(OPC+GGBFS+CSA) 질량의 2%와 4% 추가하였다. 모든 배합의 물-결합재 비(w/b)는 0.35이다. 본 연구에서는 미니슬럼프, V-funnel, 응결시간, 압축강도와 건조수축을 측정하였다. 실험결과 유동화제 양, V-funnel, 응결시간과 건조수축은 CSA와 Na2SiO3가 증가함에 따라 감소하였다. 그러나 압축강도는 CSA와 Na2SiO3가 증가함에 따라 증가하였다. 이러한 원인 중 하나는 CSA와 Na2SiO3가 GGBFS의 활성화를 촉진하였기 때문이다. 최고의 성능을 나타낸 배합은 CSA 5.0% + Na2SiO3 4%를 혼합한 시험체이다.
        26.
        2017.09 서비스 종료(열람 제한)
        In this study, fundamental properties and change with time of cement mortar accompanied with change of solid content ratio of PC type superplasticizer were analyzed. As a result, it was clarified that the flow and air content decreased as the solid content ratio decreased, and the compressive strength increased slightly.
        27.
        2017.09 서비스 종료(열람 제한)
        The study was conducted to evaluate the latent heat properties of cement mortar with different contents of phase change material (PCM). The paraffin PCM with melting point of 44℃ used in this study. PCM was added in the mixture with contents ranged from 0 to 30%. Test results indicated that the heat storage performances of cement mortar were improved with increasing the content of PCM.
        28.
        2017.08 KCI 등재 서비스 종료(열람 제한)
        본 연구는 저온환경에서 경화가 가능한 알루미나시멘트 및 아질산염을 사용한 보수용 시멘트 모르타르의 기초성능을 평가하고자 하였다. 이를 위해 국내 건설현장에서 사용되고 있는 보수용 모르타르를 조사 및 선정하였으며, 이를 대상으로 알루미나시멘트, 아질산염을 치 환하여 혼입량 조절에 따른 실험평가를 실시하였다. 그 결과, 알루미나시멘트, 아질산염을 보수용 모르타르에 치환하여 사용할 경우 초기 강도 발현이 증진되었다. 또한 내화학성이 개선되었고 수축거동이 감소하였으며 동결융해에 대한 저항성이 증대되었다. 알루미나시멘트와 아질산 염을 2:1의 비율로 7.5% 치환하여 외부구조물에 시공한 결과 표면상태가 5개월 이상 양호하게 유지되었으며, 실제 외부구조물에 사용성이 우 수한 것으로 판단된다.
        29.
        2017.05 KCI 등재 서비스 종료(열람 제한)
        콘크리트는 다공성 건설재료이며, 매립된 철근의 부식은 내구성 및 안전성에 큰 영향을 미친다. 본 연구는 비파괴 검사인 반전위측 정값과 생성된 부식량과의 상관성을 피복두께, 물-시멘트비를 고려하여 도출하는 것이다. 이를 위해, 3가지 수준의 물-시멘트비와 4가지 수준 의 피복두께를 가진 시멘트 모르타르 시편이 제조되었으며, 3가지 수준의 촉진부식기간을 고려하여 부식량 및 반전위를 측정하였다. 습윤상태 에서는 반전위가 크게 증가하였으며, 부식량과 촉진기간은 선형적인 관계를 가지고 있었다. 부식량이 증가할수록, 피복두께가 감소할수록, 물-시멘트비가 증가할수록 반전위는 증가하였다. 전체의 반전위 측정값을 부식량과 비교할 경우 0.67의 낮은 결정계수를 가지고 있었으나 부식 량(촉진기간)을 고려하여 3가지 수준을 고려할 경우 0.90이상의 높은 결정계수를 가지고 있었다. 실내조건과 같이 온도가 일정하고 포화상태 일 경우, 측정된 반전위는 부식량과 선형적인 상관성을 가지고 있었으며, 피복두께, 물-시멘트비, 철근직경, HCP의 측정범위를 알 수 있다면, 매립된 철근의 부식량을 예측할 수 있다고 판단된다.
        30.
        2017.04 서비스 종료(열람 제한)
        This paper investigates the effect of amount of Paraffin-encapsulated phase change material (PCM) on the thermal energy storage of cement mortar for developing energy saving concrete. The PCM with melting point of 44℃ was used in this study. The added amounts of PCM in the cement mortar were 0, 10, 20 and 30% of cement weight. The results indicated that the heat storage properties of cement mortar was improved with increasing contents of PCM.
        31.
        2017.01 KCI 등재 서비스 종료(열람 제한)
        This paper investigates the effect of amount of Paraffin-encapsulated phase change material (PCM) on the thermal energy storage of cement mortar for developing energy saving concrete. The PCM with melting point of 44℃ was used in this study. The added amounts of PCM in the cement mortar were 0, 10, 20 and 30% of cement weight. The results indicated that the heat storage properties of cement mortar was improved with increasing contents of PCM.
        32.
        2017.01 KCI 등재 서비스 종료(열람 제한)
        본 논문은 바탕면의 함수조건에 따른 보수재료로서 MKPC의 인발 부착강도, 전단 부착강도, 계면 부착강도를 폴리머 시멘트 모르 타르, 에폭시 모르타르와 비교 분석하였다. 그 결과 MKPC는 PC 및 MKPC와 비교하여 바탕면 함수조건에 따른 부착성능의 변화가 상대적으 로 작은 것으로 나타났다. 또한 MKPC의 경우 절건 바탕면에서의 부착성능은 무기계 보수재료인 폴리머 시멘트 모르타르와 비교하여 우수한 특성을 지니고 있으며, 습윤 바탕면에서의 부착성능은 폴리머 시멘트 모르타르와 유사한 수준을 보이고 있으나 에폭시 모르타르와 비교하여 우수한 특성을 지니는 것으로 나타났다.
        33.
        2016.10 서비스 종료(열람 제한)
        In this study, five high intelligent concrete (HIC) test specimens were fabricated by reinforcing the cement mortar with garnet, fiber (nylon and polypropylene), and shape memory alloy (SMA), to examine the effects of the numbers and positions of the reinforcements on the physical characteristic of the SMA. In improving the yield strength and structural self-rehabilitation capability, two or more hybrid fiber, PP and SMA reinforcements, as in SMA-PP, SMA-NP, SMA-2 yielded better results than SMA-1.
        34.
        2016.04 서비스 종료(열람 제한)
        This paper showed evaluations of mechanical performances of High-Performance Fiber Composite Mortar which made by cement free binders with Alkali-activated slag and PVA fibers with the volume fraction of 1~1.5%. Specimens were subjected to compressive, tensile and shear strength test and the test results showed their high performance mechanical characteristics.
        35.
        2016.04 서비스 종료(열람 제한)
        Recently, a Multi-Walled Carbon Nano Tube(MWCNT) is widely used to increase mechanical strength of the cementitious composite material. In this study, a dilution of MWCNT aqueous solution(from wt 2.0%, 1.5% to wt 1.0%) is a main parameter. A compressive strength of diluted CNT cement mortar is maximum 4.7% larger than that of a pure CNT cement mortar. The result indicates that the diluted MWCNT aqueous solution of the MWCNT cement mortar makes very little differences of the compressive strength.
        36.
        2016.04 서비스 종료(열람 제한)
        This paper showed evaluations of mechanical performances of High-Performance Fiber Composite Mortar which made by cement free binders with Alkali-activated slag and PVA fibers with the volume fraction of 1~1.5%. Specimens were subjected to compressive, tensile and shear strength test and the test results showed their high performance mechanical characteristics.
        37.
        2016.04 서비스 종료(열람 제한)
        In this study, Corrosion behavior in mortar was observed by the passage of time by using EIS method. As a result of EIS experiment, equivalent circuit and changes of Impedance parameter could be observed. In addition, it was confirmed that impedance of rebar in mortar and corrosion rate according to the amount of NaCl were different.
        38.
        2016.03 KCI 등재 서비스 종료(열람 제한)
        알칼리활성화 슬래그-레드머드 시멘트는 알칼리활성화 시멘트 연구의 일환으로서 시멘트 조성에서 알칼리자극제, 고로슬래그와 레드머드로 구성되어져 있으며, 포틀랜트 시멘트를 사용하지 않는 클링커 프리 시멘트(Clinker Free Cement)를 의미한다. 본 논문에서는 포틀 랜트 시멘트를 전혀 사용하지 않고 고분자 유기화합물인 재유화형 분말 폴리머를 혼입한 알칼리활성화 슬래그 시멘트에 레드머드의 대체율을 달리하여 강도특성, 기공특성 등을 기존 포틀랜트 시멘트와 비교 평가하였다. 그 결과 알칼리활성화 시멘트에 레드머드를 대체할 경우 C-S-H 광물상과 에트린가이트가 주요 수화생성물로 포틀랜트 시멘트와 비교하여 조직이 치밀하고 대체율 10%까지는 압축강도 및 휨강도가 증가하 였다.
        39.
        2015.04 서비스 종료(열람 제한)
        This study was intended to estimate the effect of adding stone dust into cement mortar on the rheological properties. it was found that higher the content of stone dust decrease the yield stress but there was no noticeable correlation between stone dust dosage and the plastic viscosity.
        40.
        2015.04 서비스 종료(열람 제한)
        Due to the increasingly serious environmental problems presented by waste tires, the feasibility of using elastic and flexible tire-rubber particles as aggregate in concrete is investigated in this study. Tire-rubber particles is composed of tire chips, crumb rubber, and a combination of tire chips and crumb rubber. Experimental work of Waste Rubber Particle Reinforced Mortar(WRPRM) have been conducted in the form of cube specimens [50mm x 50mm x 50mm], beam specimens [40mm x 40mm x 160mm] mixed with 0%, 5%, 10%, 15%, 20%, 25% of rubber particle. We executed test for compression strength test, bending strength test on 7 days, 14days, 28days and percentage of moisture content test on 28days after initial curing. In this study, We studied the initial strength of WRPRM. But, in order to understand the reinforcing effect of the rubber particles, we need to execute a test of Waste Rubber Particle Reinforced Concrete(WRPRC).
        1 2 3 4