Detergency and surface active properties of mixed anionic surfactants with amphoteric and nonionic were investigated. Sodium dodecyl sulfate (SDS) and ammonium dodecyl sulfate (ADS) as anionic surfactants and cocamidopropyl betaine (CAPB) as an amphoteric surfactant were used. Nonionic surfactants, which are butyl glucoside (BG), octyl glucoside (OG), decyl glucoside (DG), lauryl dimethylamine oxide (AO) and saponin were also used. To study the synergy effects of mixed SDS/ADS anionic surfactant systems, amphoteric and nonionic surfactants were added into the mixed anionic surfactants. Investigated properties of surfactant mixtures were critical micelle concentration (CMC), surface tension (γ), wettability. In addition, based on these properties, detergency of each sample was examined. Surfactant mixtures are anionics (SDS/ADS), anionic/amphoteric/nonionic (SDS/ADS/CAPB/ saponin), and anionic/nonionic (SDS/ADS/BG/saponin, SDS/ADS/OG/saponin, SDS/ADS/ DG/saponin, and SDS/ADS/AO/saponin). With the addition of amphoteric and nonionic to mixed anionic surfactants, CMC and γ were decreased. Addition of CAPB, which is amphoteric, showed the best property at CMC and γ. Furthermore, as the chain length of hydrocarbon in alkyl glucosides was increased, the CMC and γ were enhanced. However, the wettability did not exactly match up with CMC and γ. The surfactant mixture, which contained DG, showed the best performance at wetting time. Detergency was measured at various temperatures (15 oC, 30 oC, 50 oC). The cleaning performance was enhanced by increasing washing temperature. Moreover, detergency was influenced by not only CMC and γ but also wettability. Although CMC and γ were not minimum at surfactant mixture that included DG, the best cleaning performance showed in that sample.

본 연구에서는 알킬체인의 길이가 서로 다른 benzyltrialkylammonium chloride계 화합물을 합성하여 리포좀 제조에 응용하였다. 제조된 리포좀의 평균 입도분포, 제타전위, 방출거동 및 항균성을 조사하였으며, 사슬 길이에 따른 특성을 비교하였다.리포좀의 평균 입도는 120~140 nm의 크기분포를 가졌으며 소수성 사슬의 길이가 증가할수록 큰 입 자크기를 가졌다. 리포좀 용액의 제타전위는 양이온성 계면활성제인 benzyltrialkylammonium chloride를 첨가함에 따라 +80~90 mV의 값을 가지며 향상된 분산 안정성을 보였다. 방출거동에서는 사슬 길이에 따라 방출 속도를 조절할 수 있었으며 긴 사슬의 계면활성제를 첨가한 리포좀은 증가된 서방형 방출특 성을 보였다. 또한, 리포좀의 포집효율은 25.9~27.5% 이었다.

In this study, we developed and validated microanalysis methods for the determination of linear alkylbenzenesulfonate (LAS), sodium lauryl sulfate (SLS), and alpha olefin sulfonate (AOS). The conditions for the analysis of the surfactants using HPLC with FLD, RID, and ELSD detectors were investigated. The methods were validated by determining the linearity, limits of detection (LODs), limits of quantification (LOQs), recovery, precision, and accuracy. LAS analysis by FLD revealed calibration curves that were linear in the range of 10-200 mg/L for an LAS mixture. The calibration curves for C10-C13 had correlation coefficients of 0.995, 0.997, 0.996, and 0.997, respectively. SLS analysis using RID generated a linear calibration curve in the range of 10-300 mg/L. The calibration curve for SLS C12 had a correlation coefficient of 0.9994. AOS analysis using ELSD resulted in a correlation coefficient of 0.9940. For LAS, the LODs and LOQs were 0.09-0.56 and 0.30-1.87 mg/L, respectively. For SLS C12, the LOD and LOQ were 0.07 and 2.33 mg/L, respectively. For AOS C14, the LOD and LOQ were 16.55 and 21.83 mg/L, respectively. The recoveries were 97.17-98.84% for LAS C10-C14, 97.94% for SLS C12, and 96.11% for AOS C14. The established methods provide acceptable precision and accuracy. Our methods could be useful for the detection of anionic surfactants in dishwashing detergents.

We report on an all-solution-processed hydrothermal method to control the morphology of ZnO nanostructures on Si substrates from three-dimensional hemispherical structures to two-dimensional thin film layers, by controlling the seed layer and the molar contents of surfactants during their primary growth. The size and the density of the seed layer, which is composed of ZnO nanodots, change with variation in the solute concentration. The ZnO nanodots act as heterogeneous nucleation sites for the main ZnO nanostructures. When the seed layer concentration is increased, the ZnO nanostructures change from a hemispherical shape to a thin film structure, formed by densely packed ZnO hemispheres. In addition, the morphology of the ZnO layer is systematically controlled by using trisodium citrate, which acts as a surfactant to enhance the lateral growth of ZnO crystals rather than a preferential one-dimensional growth along the c-direction. X-ray diffraction and energy dispersive X-ray spectroscopy results reveal that the ZnO structure is wurtzite and did not incorporate any impurities from the surfactants used in this study.

실리콘계 계면활성제는 소수성 유기실리콘 그룹에 하나 또는 그이상의 친수성 극성그룹이 결 합되어 있다. 반면에 탄화수소 계면활성제의 소수성 그룹은 탄화수소이다, 실리콘 계면활성제는 낮은 계 면장력, 윤활성, 퍼짐성, 발수성, 열 안정성, 화학적 안정성 때문에 폴리우레탄 폼을 시작으로 건설재료, 화장품, 페인트잉크, 농약 등 많은 산업분야에 사용되고 있다. 다양한 응용분야에서의 요구사항을 반영 하기 위한 다양한 기능을 가진 폭 넓은 화학구조를 가진 실리콘 계면활성제들이 필요하다. 본 총설에서 는 소수성 폴리실록산 중추로서의 폴리디메틸실록산과 반응성 폴리실록산의 성질과 합성방법, 반응성 폴 리실록산을 친수성 그룹과 결합시키는 규소수소화반응 같은 주요 반응방법, 그리고 폴리에테르, 이온성, 카보하드레이트 타입 같은 주요 고분자 실록산 계면활성제들의 합성방법을 논의한다.

양쪽성 계면활성제인 dodecyldimethyl(3-sulfopropyl)ammonium hydroxide(LSB, CH3(CH2)11N+(CH3)2(CH2)3SO3-)와 LSB/Tween-20, LSB/Tween-40, LSB/Tween-80 및 LSB/DTAB, LSB/TTAB, LSB/CTAB 혼합계면활성제의 임계미셀농도(CMC)값을 284 K에서 312 K의 온도범위에서 UV/Vis 분광광도법으로 측정하였다. 열역학적 연구를 위해 온도의 변화가 미셀화에 어떤 영향을 미치는지를 분석하였다. 계산한 결과 측정범위 내에서 미셀화에 따른 깁스 자유에너지값은 측정범위 내에서 모두 음의 값을 나타내었다. 한편 엔탈피값은 Tween-20에서는 양의 값을 그리고 다른 계면활성제에서는 음의 값을 나타내었다. 엔트로피값은 측정한 온도범위 내에서 모두 양의 값을 나타내었다. 또한 모든 열역학 함수값들은 온도와 알킬-그룹의 길이에 따라 큰 변화를 보였다.

비이온계면활성제 가운데 솔비톨계 계면활성제인 Span을 이용해 수열합성법으로 수산화마그네슘을 합성하였다. 수산화마그네슘 합성의 전구체는 염화마그네슘과 수산화나트륨을 사용하였다. 비이온 계면활성제는 안정제와 분산제 그리고 표면 개질제로 적용하였다. 비이온 계면활성제를 첨가하였을 경우 수산화마그네슘 입자는 좀 더 작고 균일한 크기와 좋은 분산성을 나타내었으며, 소수성 성질을 나타내었다. 합성된 입자의 특성은 PSA, SEM, EDS, XRD 그리고 FT-IR을 통해 확인하였다. 기기 분석을 통해 개질 전과 후의 수산화마그네슘의 소수성, 분산성 특성을 비교하였다. 또한 실험조건에 따라 수산화마그네슘 입자의 표면 개질 특성 변화를 확인하였다.

Gemini type of cationic surfactant, namely α,ω-alkane-bis(N-lauroyloxyethyl -N,N-dimethyl)-diammonium bromide was synthesized and confirmed by FT-IR and 1H-NMR spectroscopy. Their inhibition effect on corrosion of mild steel in 1 M HCl solution was tested by weight loss method. Surface tensions were measured by surface tensiometer Sigma 70. Their c.m.c. values evaluated by surface tension method was 4.01×10-5∼ 4.99×10-5 mol/L. The Krafft point of the these surfactants were < 0 ℃. The emulsifying properties of synthesized cationic gemini surfactants and sodium dodecyl sulfate (SDS), tetradecyl trimethyl ammonium bromide (TTAB) was investigated. Of these, α,ω-alkane-bis(N-lauroyloxyethyl-N,N-dimethyl)- diammonium bromide has been confirmed as a good emulsifier. The inhibition efficiency increases by increasing cationic gemini surfactant concentration. As a result, these surfactants are expected to be applied as corrosion inhibitors.

The crystallization of polypropylene (PP) particles in PP/decalin solution was conducted using the thermally induced phase separation(TIPS). During the control of particles sizes followed by the cooling of PP/decalin solution, particles were formed controllably, the concentrated PP resulted in an increase in the average diameter of PP particles. The effects of surfactants changes on particles sizes were investigated by using a field emission scanning electron microscope (FE-SEM). The PP crystals showed spherical shapes with a diameter 5∼18 μm. Additionally, as an effect of concentration of PP, the size distribution of the PP particles became broad with higher concentration of PP in the solution.

N,N,N-Trimethyl-10-nitrophenoxy decylammonium bromide (N10TAB) and N,N,N,N-Tetramethyl-bis-〔10-nitrophenoxy decyl〕-1,6-hexanediammonium dibromide (N10-6-10N), bearing aromatic nitrophenoxy group in the end of their hydrophobic chains have been prepared, and their properties in aqueous solutions have been studied by conductivity and H-NMR spectroscopy. Below the critical micelle concentration N10-6-10N form premicelle with two or three surfactant molecules. Beyond the critical micelle concentration two molecules have strong self-aggregation ability and form micelles of rather small size and with small aggregation numbers. H-NMR at different concentrations give the informations on the environmental changes of the surfactants on their micellization progress.

본 연구에서는 계면활성제 분석법의 개발을 위하여 High performance liquid chromatography-evaporative light scattering detection(HPLC-ELSD) 기기를 이용하여 음이온 및 비이온 계면활성제 중 다소비 계면활성제인 Alkyl polyglucoside(APG)와 Alpha olefin sulfonate(AOS)를 분석하였다. 실험 결과 APG와 AOS 모두 직선성의 상관관계 계수(R2)가 0.99 이상으로 직선성이 양호하였으며, 검출한계는 APG가 2.29 mg/L, AOS가 16.55 mg/L로 나타났고, 정량한계는 APG가 7.63 mg/L, AOS가 55.16 mg/L로 나타났다. 또한, 회수율 검증을 실시한 결과 APG는 99.29%, AOS는 96.11%로 나타나 회수율 100±10% 이내의 검증기준을 모두 만족하였다. 정밀성 및 정확성을 판단한 결과 APG의 정밀성은 상대표준편차 0.30%, 정확성은 0.26-0.52%로 분석되었으며, AOS의 정밀성은 상대표준편차 0.10%, 정확성은 0.01-0.52%로 분석되어 모두 상대표준편차 1.0% 이하의 검증기준에 적합하였다. 확립된 분석법을 주방세제에 적용하여 분석한 결과 샘플 3종 모두에서 APG와 AOS가 각각 검출되었으며, 표준사용량을 기준으로 APG, AOS의 평균 함유량은 각각의 LD50에 크게 미치지 못하는 것으로 나타났다. 따라서 본 연구를 통하여 확립된 음이온 및 비이온 계면활성제의 분석법은 모든 성분에 대해 감응함으로 한가지 검출기를 이용하여 여러성분을 동시에 측정할 수 있어 식기 등의 잔류물질 혹은 식품 중 혼입되어 있는 다양한 계면활성제 함유량 분석에 적용하여 계면활성제의 관리를 위한 기초자료로 활용될 것으로 본다.

Cationic gemini-surfactant, namely 1,4-butane-bis(N-alkanoyloxyethyl-N,Ndimethyl)-diammonium bromide was synthesized and their inhibition effect on corrosion of mild steel in 1 M HCl solution was tested by weight loss method. The synthesized product was confirmed by FT-IR and 1H-NMR spectroscopy. Surface tensions were measured by surface tensiometer Sigma 70. Their c.m.c. values evaluated by surface tension method was 4.1×10-5~5.4×10-5 mol/L. The Krafft point of the these surfactants were 〈0~10.7℃. The emulsifying properties of synthesized cationic gemini surfactants and sodium dodecyl sulfate (SDS), tetradecyl trimethyl ammonium bromide (TTAB) was investigated. Of these, 1,4-butane-bis(N-lauroyloxyethyl-N,N-dimethyl)- diammonium bromide, CGL 14-4-14 has been confirmed as a good emulsifier. The inhibition efficiency increases by increasing cationic gemini surfactant concentration. As a result, these surfactants are expected to be applied as corrosion inhibitors.

The effects of HLB value of nonionic mixed surfactants on the stability and antifoaming ability for silicon oil type emulsions were studied. To obtain a stable silicone emulsions, a higher HLB values and higher content of surfactants were preferred. To obtain a good antifoaming ability, however, a lower HLB value (more hydrophobic) and a lower content of the surfactants were preferred. It was observed, at lower HLB values(8 or 9), that the silicone oil drops were spreaded on the foam surface and effectively reduced the surface tension. And the spreading phenomena presumably acted as an antifoaming mechanism. Therefore, a higher hydrophobicity of the silicone oil emulsion resulted in a higher ability of antifoaming action.

Substantial efforts have been made to manipulate ruminal environment in a hope to enhance ruminal fermentation efficiency for better ruminant productivity. Some of examples are methane inhibitors, antibiotics, microbial enzymes, fatty acids and/or lipid feeding, buffering agents, ionophores and probiotics. Of these efforts, the non-ionic surfactant (NIS) has been known for its stimulation to release enzymes from a range of anaerobic microbes. A series of studies were conducted 1) to evaluate NIS diluted with water and ethanol on in vitro ruminal fermentation and 2) to determine the influence of diluted NIS on digestibility of feedstuffs. In first experiment (Exp. 1), NIS was diluted with water or ethanol to measure its effects on in vitro microbial growth, ruminal enzyme activities and gas production by mixed ruminal microbial culture. The NIS was diluted with water or ethanol separately in a 1:5 ratio (w/v). Water and ethanol-diluted NIS with wheat flour were added with rice straw-based mixed ruminal microbial cultures at the rate of 2 ㎎ NIS/16 ㎖ McDougall buffer plus 4 ml ruminal fluid solution. The mixed ruminal microbial culture was run without any NIS addition as control. Addition of NIS either diluted with water or ethanol has significantly reduced the gas production in mixed ruminal microbial culture at 12 and 24 h of incubation. At 48 h post incubation, gas production was the highest with the addition of ethanol diluted NIS followed by water-diluted NIS and control. Carboxy methyl cellulase activity in rice straw-based mixed ruminal bacterial culture was significantly higher with the addition of ethanol-diluted NIS compared with the addition of water-diluted NIS and control at 24 and 72 h post incubation. In second in vitro experiment (Exp. 2), effects of addition of ethanol diluted NIS on dry matter (DM) digestibility of alfalfa hay, gas production, pH and cellular growth in mixed ruminal microbial culture were examined. Alfalfa hay based mixed ruminal microbial culture without any NIS addition was run as a control. The pH of mixed ruminal microbial culture was significantly lower than control at all post incubation sampling hours. In vitro DM digestibility of alfalfa hay was significantly higher with the addition of NIS compared with control. Gas production was significantly less with NIS addition compared with control at all post incubation sampling hours. Microbial growth in mixed ruminal microbial culture was significantly increased with the addition of NIS compared to control.

Silicone dioxide absorbed polyoxyethylene alkylether sulfate (EU-S133D) surfactant was prepared. Core-shell polymers of inorganic/organic pair, which have both core and shell component, were synthesized by sequential emulsion polymerization using Acrylate as a shell monomer and potassium persulfate (KPS) as an initiator. We found that when Acrylate core prepared by adding 2.0 wt% EU-S133D, silicone dioxide/Acrylate core-shell polymerization was carried out on the surface of silicone dioxide particle without forming the new silicone dioxide particle during acrylate shell polymerization in the inorganic/organic core-shell polymer preparation. The structure of core-shell polymer were investigated by measuring to the thermal decomposition of polymer composite using thermogravimetric analyzer and morphology of latex by scanning electron microscope(SEM).

The inorganic-organic composite particles with core-shell structure were polymerized by using styrene and potassium persulfate (KPS) as a shell monomer and an initiator, respectively. We studied the effect of surfactants on the core-shell structure of silicone dioxide/styrene composite particles polymerized in the presence of sodium dodecyl sulfate(SDS), polyoxyethylene alkylether sulfate (EU-S133D), and at none surfactant condition. We found that SiO2 core / polystyrene(PS) shell structure was formed when polymerization of styrene was conducted on the surface of SiO2 particles, and the concentration SDS and EU-Sl33D was 8.34×10-2mole/L. The core-shell structure was confirmed by measuring the thermal decomposition of the polymer composite using thermogravimetric analyzer (TGA), and the morphology of the composite particles was characterized by transmission electron microscope (TEM).

The core-shell composite particles of inorganic/organic were polymerized by using styrene(St) as a shell monomer and potassium persulfate (KPS) as an initiator. We studied the effect of core-shell structure of silicone dioxide/styrene in the presence of an anionic surfactant sodium lauryl sulfate (SLS) and polyoxyethylene alky lether sulfate (EU-S133D). We found that when SiO2 core/PSt shell polymerization was prepared on the surface SiO2 particle, to minimize the coagulation during the shell polymerization, the optimum conditions were at concentration of 2.56×10-2mole/L SLS. The structure of core-shell polymer was confirmed by measuring the thermal decomposition of polymer composite using thermogravimetric analyzer and morphology of core-shell polymer particles by transmission electron microscope (TEM).

The core-shell latex particles were prepared by sequential emulsion polymerization using alkyl methacrylate as a shell monomer and potassium persulfate (KPS) as an initiator. We study the effects of core-shell structure of calcium carbonate/alkyl methacrlyate in the presence of an anionic surfactant sodium lauryl sulfate (SLS) and polyoxyethylene alkyl ether sulfate (EU-S133D)). The structure of core-shell polymer were investigated by measuring to the thermal decomposition of polymer composite using thermogravimetric analyzer and morphology of latex by transmission electron microscope (TEM).

This article investigated to polymer-clay nanocomposite, especially in interfacial respect clay structure, its dispersion into polymer matrix, and clay modification is studied. The cationic exchange of surfactants with clay gallery results in preparing organo-clay capable of compatiblizing to monomer or polymer and increasing interlayer adhesion energy due to expansion of interlayer spacing. The orientation of surfactant in clay gallery is affected by chemical structure and charge density of clay, and interlayer spacing and volume is increased with alkyl chain length of surfactant, or charge density of clay. Also, the interaction between clay and polymer in preparing polymer-clay nanocomposite is explained thermodynamically. In the future, the study and development of polymer-clay nanocomposite is paid attention to the interfacial adhesion, clay dispersion within polymer, mechanism of clay intercalation or exfoliation.

The interaction between anion and zwitterionic surfactants was investigated by means of surface tension, NMR spectroscopy, and fluorescence studies. These systems are N-tetradecyloxymethyl-N,N-dimethyl betaine (C14, TDB), N-octadecyloxymethyl-N,Ndimethyl betaine (C18, ODB), and sodium dodecylethoxy sulfate (SDE). These systems show a composition dependency in micellar properties. When the molar fraction of TDB and ODB was about 0.6, the cmc values of these systems showed minima, whereas the solubilized amount of a water insoluble dye, NMR line width showed maxima. These changes comes from the intramolecular complexes formed in the mixed micelles. The complexes are due to the electrostatic interaction of oppositely charged head groups of betaine and sodium dodecylethoxy sulfate. A comparison of betaine and SDE alkyl methylene group line widths to those of n-methyl group indicates that the interior of the micelle in the restricted region is more immobile than the head group.