We discuss recent advances in hydrodynamical computations of the circumstellar medium, which are useful to understand some features observed in long gamma ray bursts.

This study deals with the improvement of production process on a flow production system with the consideration of six sigma. We analyze the production process and survey the important factors of improvement of productivity. Using a six sigma, we find strategic point and suggest a reformation of production process. We applied a simulation technique to simulate the production line proposed by the result of the Six sigma. With the result of the simulation, this study analyzes the propriety of production line and proposes the alternatives of new production process.

The warm ionized medium (WIM) outside classical H II regions is a fundamental gas-phase constituent of the Milky Way and other late-type spiral galaxies, and is traced by faint emission lines at optical wavelengths. We calculate the photoionization models of the WIM in the Galaxy by a stellar UV radiation with the effective temperature 35,000 K assuming not only spherical geometry but also plane parallel geometry, and compare the results with the observed emission line ratios. We also show the dependence of the emission line ratios on various gas-phase abundances. The emergent emission-line ratios are in agreement with the average-values of observed ratios of [S II] λ6716/Hα, [N II] λ6583/Hα, [O I] λ6300/Hα, [O III] λ5007/Hα, He I λ5876/Hα. However, their extreme values could not be explained with the photoionization models. It is also shown that the addition of all stellar radiation from the OB stars in the Hipparcos stellar catalog resembles that of an O7-O8 type star.

This study was carried out to obtain basic data on physiological characteristics for an artificial cultivation of Grifola frondosa. Ten strains of G. frondosa were collected from Korea, China and Japan and those were isolated and tested. PDA medium was selected for the favorable culture medium. The optimal conditions for the mycelial growth of G. frondosa were 25℃ and pH 4∼5 respectively. The carbon and nitrogen sources for the optimum mycelial growth were fructose and peptone, respectively. Highest mycelial growth was observed when the C/N ratio was 10∼20. Significant differences among lines were found for production yield and crop cycle time. KME44009 had a short spawn run time, high yield, good color and quality compare with other strains. To find out the suitable medium composition of G. frondosa, physicochemical conditions were investigated. The T2 formulation (55:25:8:12 mixing ratio of oak sawdust, oak chip, wheat bran and soybean cake) showed the shortest time to complete the crop cycle and the highest yields(weight of fresh mushrooms harvested at maturity). Among the physicochemical factors, pH, crude oil and total nitrogen may affect mushroom yield. Therefore, development of suitable medium would benefit from increased production efficiency of G. frondosa mushrooms and be commercial potential.

The distribution of light in a randomly scattering medium can represent problems found in many area. Particularly, in the clinical application of lasers for Photodynamic therapy(PDT) or in the fluorescence spectroscopy for biological tissue, turbidity plays a very important role. The influences of fluorophor, scatterer, and absorber in turbid material by light scattering were interpreted for the scattered fluorescence intensity and wavelength. The molecular properties have been studied by laser induced fluorescence spectroscopy in scattering medium as tissue. It has been found that the effects of optical properties in scattering media could be investigated by the optical parameters(μs, μa ,μt). Experimental and Monte Carlo simulation method for modelling light transport in tissue was applied. The experimental results using a randomly distributed scattering medium were discussed and compared with those obtained through Monte Carlo simulation. It'll be also important in designing the best model for oil chemistry, medicine and application of medical engineering.

본 연구는 배지의 종류 및 부피가 절화 장미의 발근과 발근 후 생육에 미치는 영향을 알아보기 위하여 수행하였다. 실험은 유리온실의 철재 베드에 높이 1.5m의 아치형 터널을 설치하고 습도유지를 위하여 fog(200sec./5min. or 100sec./5min) 가습하고, 삽목초기에 차광률 55%의 한랭사로 차광하였다. 실험재료는 Rosa hybrida 'Red Sandra'와 'Little Marble' 두 품종을 사용하였다. 배지의 종류에 따른 발근 차이를 알아보기 위하여 10가지 배지(토실이 상토, 암면큐브, phenolic foam, perlite, vermiculite, 또는 perlite와 peatmoss 1:1, perlite와 coir 1:1, perlite와 rockwool 1:1, rockwool 1:1, rockwool과 peatmoss 1:1, rockwool과 coir 1:1, v/v)를 준비하여 삽목하였다. 발근배지의 부피에 따른 발근 및 생육의 차이를 알아보기 위하여 3가지의 배지(토실이 상토, 암면큐브, phenolic foam)를 각각 3가지 부피(3×3×3cm, 5×5×5cm, 7×7×7cm)에 삽목하였다. 배지의 종류를 달리한 실험은 두 품종 모두에서 Rockwool 1: Peatmoss 1 배지에서 발근과 생육에서 가장 좋은 결과가 나타났으며, 배지의 부피에 따른 발근율과 모든 생육은 배지의 용적이 커질수록 좋았다.

커피나무(Coffea arabica L. ‘Blue Mountain’)의 분화 관상식물로 개발할 목적으로 적정 용토와 액비농 도를 구명하기 위한 실험을 수행하였다. 분용토 선발을 위하여 토실이상토, 폐암면입자 + 일반상토, 폐암면입 자 + PUR(스펀지)입자, 폐암면입자 + 목재칩, 그리고 일반상토를 이용하여 약 3개월간 재배한 결과, 초장 및 수관폭 등 생육지표에서 폐암면입자 + 일반상토와 폐암면입자 + PUR입자가 가장 좋았다. 엽록소와 엽색 에서 토실이상토, 폐암면입자 + 일반상토, 그리고 폐암 면입자 + PUR입자에서는 진한 녹색으로 관상가치가 높았으나, 폐암면입자 + 목재칩과 일반상토구에서는 녹 색이 엷어져 상품성이 많이 떨어졌다. 적정 액비 농도 를 구명하기 위해 Hyponex를 2000, 1000, 500배 희석액으로 1회/주 살포한 결과, 1000배 희석액까지는 뚜렷한 차이가 보이지 않았으나 500배 희석액에서는 생육이 더 좋고 엽색도 진한 녹색으로 상품가치가 더 좋은 것으로 나타났다. 결론적으로 폐암면입자에 일반 상토나 PUR입자를 혼합하여 사용하고 Hyponex 500 배 희석액을 주 1회 관주하면 좋은 품질의 커피나무 분화를 생산할 수 있을 것으로 판단되었다.

본 시험의 목적은 대구 경북에 자생하는 헤어리베치로 다수성 조생품종과 중만생품종을 개발하기 위하여 수행하였다. 경북 성주와 경남 사천에서 1998년부터 2006년까지 자료수집 및 순화, 생육이 왕성한 조생 및 중만생계통 선발, 상호교잡의 단순순환선발법으로 조생종인 콜드그린과 중만생종인 청파를 육성하였다. 육성종자는 2004년부터 2006년까지 경북성주와 경남사천에서 생육특성과 수량을 평가하였다. 줄기의 털은 콜드그린과 청파는 있었으나, 헤이메이커프러스와

In this paper, we summary known suggestion system which is useful a small and medium enterprise. We don't think suggestion system of a small and medium enterprise active. We reflect 2 points of suggestion system. We propose the Active Plan to Suggestion System for small and medium Enterprise which are (1) suggestion direction for enterprise future, (2) suggestion body for all employee included, (3) suggestion methods for all information shared.

In this study, as the result of analyzing the relationship and influence between economic outcome and R&D supporting investment, the number of supporting subjects among the technological innovational areas of SMEs, it is as below. First, as the economic result of analyzing companies from the investment in R&D of technological innovational areas of minor companies, the number of supporting subjects and amount of R&D have relationship with increase of sales and export amount, employee reduction & the effect of new job creation shows positive correlation with the effect of import replacement. Second, as analyzing the influence of the investment in R&D has economic effect from of technological innovational minor companies. This is thought that the financial and R&D support increase a significant effect on economical, technical against SMEs.

교통진동의 영향을 받는 중층건물의 진동특성에 관한 논문이다. 현장진동계측은 진동원과 진동감소대책을 위하여 실시되었다. 시간영역 진동데이터는 버스와 지하철로 인한 건물에 전달된 진동 영향 등의 진동특성을 위하여 이용되었다. 진동대책을 통한 진동감소의 효과 역시 입증할 수 있었다.

This study was conducted to evaluate the effect of cytochalasin B (CB) treatment in the activation medium on the development of somatic cell nuclear transfer (SCNT) rat embryos. Fetal fibroblast cells were isolated from a Day 14.5 fetus, and the oocytes for recipient cytoplasm were recovered from 4-week old Sprague Dawley rats. After enucleation and nuclear injection, the reconstructed oocytes were immediately exposed to activation medium consisting of 10 mM SrCl2 with or without CB for 4 hr, and formation of pseudo-pronucleus (PPN) was checked at 18 hr after activation. Then, they were transferred into day 1 pseudopregnant recipients (Hooded Wistar) or cultured for 5 days to check their developmental competence in vivo or in vitro. The number of PPN was not affected by CB treatment during the activation. However, CB treatment supported pre-implantation development of rat SCNT embryos. Embryos generated by the procedures of SCNT were also capable of implanting, with 1 implantation scar found from a recipient following the transfer of 87 SCNT embryos to four foster mothers. The result of the present study shows that rat SCNT embryo can develop to post-implantation stage following treatment with CB.

질산, 불산 및 과염소산을 사용하여 플루토늄 옥사이드 을 녹여 Pu 기준용액을 제조한후 UV-Visible-Near IR 분광기를 이용하여 Pu 흡수 스펙트럼 특성을 관찰하였다. 산성, 중성 및 알칼리 매질에서 Pu(III), Pu(IV) 및 Pu(VI)에 대한 분광학적 특성을 조사하였다. 또한 알칼리 및 산 농도 증가에 따른 Pu(VI) 흡수 스펙트럼에 대한 특성 피크 세기 및 위치를 관찰하였다. 염산 및 수산화나트륨 매질에서 환원제 첨가에 따른 Pu(VI) 산화수 변화를 측정하였다.

In vitro development of porcine embryo is affected by culture condition. One possible factor is osmolarity of culture medium. This study examined whether high osmolarity of culture medium at the early culture stage improves development of preimplantation porcine in vitro fertilization (IVF) and nuclear transfer (NT) embryos. NT and IVF embryos were divided into three groups and the basic medium was PZM-3 (250～270 mOsmol, control group). The control group of embryos was cultured in PZM-3 for whole culture period. Other two groups of embryos were cultured in a modified PZM-3 with 0.05 M sorbitol or 0.05 M sucrose (300～320 mOsmol, sorbitol or sucrose group) for the first 2 days, and then cultured in PZM-3 for further culture. NT embryos cultured in sucrose group showed a significantly higher developmental rate to the blastocyst stage with a decreased apoptosis rate compared to the sorbitol (p<0.05). For IVF, sucrose group showed a significantly increased the blastocyst formation rate with a decreased apoptosis rate compared to the control (p<0.05). This study represents that the high osmolarity in the early embryo culture stage can enhance the in vitro development of porcine NT and IVF embryos to the blastocyst stage with reduced apoptosis of cells.

한국춘란의 생장점 배양방법을 확립하고 이로부터 얻어진 근경으로부터 균일한 다신초(multiple shoot)의 유도 및 효율적인 유묘의 생장에 미치는 생장조절물질 및 배지의 물리성의 영향을 조사한 결과는 다음과 같 다. 생장점배양에서 유래된 근경으로부터 신초의 재분 화를 위해서는 H3P4배지에 TDZ 0.5m·L-1를 단용 첨 가한 고체배지에서 배양했을 때 다른 배지조성에 비해 가장 많은 수의 건전한 유묘를 얻을 수 있었다. 또한, NAA 0.5mg·L-1 또는 1.0mg·L-1에 TDZ 1.0mg·L-1 를 첨가한 배지에서 형성되는 5mm 이하의 충실도가 떨어지는 유묘의 충실도를 회복하고 다수의 2차 신초 의 형성을 위해서는 TDZ 0.5 또는 1.0mg·L-1를 첨가 한 고체배지로 옮겨 계대 배양하는 것이 효과적이었 다. 형성된 이들 신초의 건전한 생장과 효율적인 발근을 위해서는 H3P4배지에 NAA 2.0mg·L-1와 BA 0.5 mg·L-1를 첨가하여 배양하는 것이 가장 효과적으로 지 상부 생육을 유도함과 동시에 발근에도 양호하였다.

  This study was concerned about mobile web-service of a VMI in the SCM system. The VMI would be a main module part of the SCM and regarded as very important thing on supply chain. Therefore, it was essential to react in real time of materials production