이 연구는 문화예술의 활성화를 위해 조상대대로 전승되어온 한국 문화 양식을 탐색하고 그동 안의 고정된 전통예술 시각에서 벗어나 새로운 의식의 전환을 꾀하는데 목적이 있다. 오늘날 문화예술은 사회 환경이 변화하면서 세분화되었고 그 시스템은 총체적 형태로 변화하였다. 그럼에도 불구하고 그동안 한국의 총체예술인 가·무·악(歌·舞·樂)의 세부적 본질에 대한 이 론적 연구가 부족하였다. 이 연구에서는 세부적으로 가·무·악의 이론적 개념을 짚어 본다. 그리고 종합예술형태의 가·무·악에서 가(歌)와 무(舞)와 악(樂)의 분리, 변화양상을 시대적으로 보고 자 한다. 마지막으로 역사 속에서 종합예술 형태로 지금까지 전해져 오는 <항장무(項莊舞>에 대해 살펴보고, 현재 종합예술 형태로 공연되는 정동극장 <미소- 춘향연가>을 통해 종합예술을 활용하여 문화상품으로 발전된 사례를 검토해 보도록 한다. 20세기 이후 점차 과거 예인(藝人)들이 설 무대가 점점 줄어들면서 한국 전통문화 양식 또한 흔들리고 있다. 이제라도 예인들의 삶 속에 내재되어 있는 기교적·정신적 원류를 우리는 정밀하 게 탐색하여야 한다. 가·무·악의 세요소가 종합적으로 어우러짐은 장르간의 벽을 허물고 우리 예술양식을 받아들임에 이질감을 없앨 수 있다. 이제 서양의 공연양식의 틀에서 벗어나 우리만의 전통예술에 관심을 가지고 한국적인 공연양식을 발전시켜 세계 속에 유일한 우리만의 공연양식으 로 문화 패러다임을 바꿔가야 할 것이다.

The flow between two rotating concentric cylinders, also known as Taylor-Couette flow system, is one of the most widely studied systems in the classical fluid dynamics. In this work, a two-dimensional Taylor-Couette flow system is simulated using the lattice Boltzmann method combined with the smoothed profile method. The fluid flow between the rotating cylinders is solved by lattice Boltzmann equation while the curved boundaries of the cylinders are treated with a smoothed profile function. To assess the validity of the present simulation technique, three different cases of rotation of the cylinders were considered: ⅰ) inner cylinder is only rotating, ⅱ) outer cylinder is only rotating, and ⅲ) both inner and outer cylinders are rotating. For all the three cases, the numerical results of the flow velocity in azimuthal direction and the hydrodynamic torque acting on the cylinders are in good agreement with the corresponding analytical solution results.

In this paper, we analyzed the characteristics of the mass flow rate and velocity of the refrigerant in response to a change in the number of holes and the diameter size(Type-1～4) of the valve guide refrigerant to flow from Pc to Ps when the pressure is constant. Type-1 is 40% higher mass flow flowing in the direction of Ps as compared with the Pc mass flow rate. Type-2 is 64% higher mass flow flowing in the direction of Ps as compared with the Pc mass flow rate. Type-3 is 50% higher mass flow flowing in the direction of Ps as compared with the Pc mass flow rate. Type-4 is 47% higher mass flow flowing in the direction of Ps as compared with the Pc mass flow rate.

This paper carried out a comparative analysis with papers on the analysis and analytic research of conventional solenoid. In case the current of solenoid valve is cut off, a flow path is formed from pressure port (Pc) connected with the crankcase of compressor to Ps port. At this time, the size of Pc port hole was so adjusted (Type-2) that it was smaller than 4.0mm(Type-1) of original hole by 0.2mm. After that, it was thought that an effect would be produced on the flow change of refrigerant which came into the solenoid vale, therefore the flow characteristics in moving from Pc port to Ps port was predicted and comparatively analyzed. According to the results of flow analysis, a velocity of approximately 46m/s and 129m/s was shown at the maximum in case of 0.2 and 1.5 MPa in Type-1, and the maximum velocity of approximately 500m/s and 1400m/s was shown in case of Type-2.

In the paper an efficient numerical algorithm to predict the flow phenomena around the water-jet propulsion system was described. The potential-based flow analysis method was adopted to predict the velocity and the pressure on the inlet duct of the water-jet propulsion system. The method employed normal dipoles and source distributed on the solid surface such as the inlet duct and the tracked vehicle. The inlet duct and outlet open boundary surfaces were introduced where the sources and dipoles were distributed to define a closed boundary surface. The developed numerical algorithm was applied to a tracked vehicle propelled by the water-jet propulsion system with the different IVR(inlet velocity ratio). The results by the numerical analysis were compared with the experimental data in order to verify the feasibility of the proposed numerical algorithm.

A numerical analysis was performed to study PEMFC performance characteristics depending on the flow direction of cathode reactant gas, cathode relative humidity, and porosity of gas diffusion layer. As cathode relative humidity decreases and porosity increases, current density increases due to better diffusion of reactant gas to cathode surface. As current density increases, power density increases initially and then decreases with its maximum located around current density value of 2.2 Amperes per square centimeter. From the analysis of current density distribution inside membrane, the counter-flow cases show more uniform profile across the membrane than the co-flow cases due to more uniform reactant gas supply.

A 2D axisymmetric numerical analysis was performed to study the characteristics of charge process inside solar thermal storage tank. The porosity and heat transfer coefficient of filler material as well as inlet velocity of heat transfer fluid are selected as simulation parameters. The porosity is varied as 0.2, 0.5, and 0.8 to account for the effect of filler granule geometry. Two levels of the heat transfer coefficient is adopted to assess the heat transfer between heat transfer fluid and filler material. The inlet velocity is varied as 0.00278, 0.0278, and 0.278m/s. As both of the porosity and the heat transfer coefficient increase, the discrepancy of the temperature distributions between the filler and heat transfer fluid decreases. As the inlet velocity increases, the penetration depth of the heat transfer fluid increases proportionally.

Vacuum kinetic spray(VKS) is a relatively advanced process for fabricating thin/thick and dense ceramic coatings via submicron-sized particle impact at room temperature. However, unfortunately, the particle velocity, which is an important value for investigating the deposition mechanism, has not been clarified yet. Thus, in this research, VKS average particle velocities were derived by numerical analysis method(CFD: computational fluid dynamics) connected with an experimental approach(SCM: slit cell method). When the process gas or powder particles are accelerated by a compressive force generated by gas pressure in kinetic spraying, a tensile force generated by the vacuum in the VKS system accelerates the process gas. As a result, the gas is able to reach supersonic speed even though only 0.6MPa gas pressure is used in VKS. In addition, small size powders can be accelerated up to supersonic velocity by means of the drag-force of the low pressure process gas flow. Furthermore, in this process, the increase of gas flow makes the drag-force stronger and gas distribution more homogenized in the pipe, by which the total particle average velocity becomes higher and the difference between max. and min. particle velocity decreases. Consequently, the control of particle size and gas flow rate are important factors in making the velocity of particles high enough for successful deposition in the VKS system.

The water distribution system should be invariably operated on continuous pattern for 24 hours a day. Occasionally, it is not practically possible to operate for 24 hours due to water shortage or financial constraints. Therefore an intermittent water supply is unavoidable in water shortage area and developing countries.But the intermittent water supply can introduce large pressure forces and rapid fluid accelerations into a water supply network. These disturbances may result in new pipe failure, leakage and secondary contamination.This paper proposed an improvement methodology to prevent the disturbances by intermittent water supply. For the study, the hydraulic variation of intermittent flow in water distribution system was measured and analyzed in the field by comparing with simulation of hydraulic model. Installations of control valves such as, pressure reducing and sustaining and air valves were employed for pressure and flow control. The effectiveness of the methods are presented by comparing hydraulic conditions before and after introducing the proposed solutions.

극저온 액체 상태의 LNG는 주거용과 산업용으로 공급되기 전에 가스 상태로 변환된다. 이러한 재가스화 과정 중에 LNG는 83.7×104 kJ/kg 정도의 많은 냉열에너지를 제공한다. 이 냉열에너지를 일부 선진국들에서는 질소, 수소, 헬륨과 같은 극저온 유체들의 액화, 제빙 및 냉방시스템에 이용하고 있다. 따라서 우리나라에서도 인천, 평택 및 통영 LNG 인수기지 주변에 LNG의 냉열에너지를 이용한 냉열에너지 회수시스템을 설립할 필요가 있다. 여기서는 저열유속상태에서 상변화를 동반하는 LNG의 유동거동 특성을 파악하기 위해 LNG의 85 %를 차지하는 메탄을 작동유체로 사용하였다. 또한 본 논문은 극저온 열교환기 내부를 흐르는 메탄과 질소, 프로판, R11 및 R134a의 유동경계에 영향을 주는 관 직경, 관의 경사각도 및 포화압력의 효과를 보여준다. 또한 여기서 얻어진 이론적 연구결과와 기존의 실험 데이터와도 비교 되었다. 그리고 메탄의 유동경계에 주는 파이프의 경사각도의 영향은 매우 큼을 알 수 있었다.

It is intended to develop an experimental apparatus which can visualize flow patterns in condensate water reuse system with various cross sections. PVC particles on fluid surface help to obtain clear flow images. The flow region that were found in the experiments are steady, unsteady and significantly-mixed flows.

In this study, numerical simulation has been conducted to investigate flow characteristics in air supply room for container vessels by a 3-dimension numerical simulation. A commercial CFD program, FLUENT, is used on the analysis. It is shown that the air supply efficiency in this room can be improved by changing position of axial fan, even though other conditions still remain unchanged.

The aim of this study is to investigate and develop the extended models for Economic Cash Amount(ECA), Cash Break Even-Point(BEP), and Cash Flow Statement(CFS) by referencing systematic literature review in the field. The study develops three extended models to determine the optimal cash amount: ECA model with interest opportunity cost, financing transaction cost and financing fail cost, ECA model with daily cash supply and interest opportunity cost, ECA model with financing fail cost and interest opportunity cost. Earnings Before Interests, Tax, Depreciation and Amortization(EBITDA) is obtained by subtracting noncash depreciation costs from Earning Before Interest and Tax(EBIT), which is efficient metric to evaluate operating cash flow. The research also develops two extended Cash BEP models, considered as interest and corporate tax, in order to indentify the break-even point as EBITDA equals zero. Furthermore, this paper proposes the modified version of CFS by introducing the reclassification of operating and financing accounts in the statement of financial position. In addition, the study also present the reclassification of five types of profit, such as gross profit, EBIT, ordinary profit, special profit, and net profit within the statement of comprehensive income. In order to provide a better understanding of the proposed cash flow models, numerical examples, such as two-sample t test and Analysis of Variance(ANOVA), are presented to demonstrate the statistical significance according to the industrial types for net working capital(i.e cash-to-cash), net profit, operating cash flow and free cash flow.

This Study has analyzed the trends of flow studies in the domestic game field. First, the flow studies in the domestic game field are mainly from economics, business administration, journalism and broadcasting and so on. Second, the content of studies is biased toward the use of games. Third, the definition of the flow concept is divided into the following two methods. The one is the method of describing user's flow condition and the other is the method of describing antecedents and consequence of flow. Fourth, technology acceptance model is mostly introduced as a theory associated with flow. The loyalty is mostly presented as a dependent variable of positive results of flow experience. Our study analyzed former studies on flow theory which is useful to research user's immersion and continuous use of games. We expect that the results of the study will be useful data for domestic game industry, research and so on.

A document control system (DCS), ANSIM (KAERI Advanced Nuclear Safety Information Management) was designed for the purpose of documents preparation, review, and approvement for JRTR (Jordan Research and Training Reactor) project. The ANSIM system consists of a document management, document container, project management, organization management, and EPC (Engineering, Procurement and Construction) document folder. The document container folder run after specific contents, a revision history of the design documents and drawings are issued in KAERI. The EPC document work-scope is a registry for incoming documents in ANSIM, the assignment of a manager or charger, document review, preparing and outgoing PM memorandum as attached the reviewed paper. On the other hand, KAERI is aiming another extra network server for the NRR (New Research Reactor) by the end of this year. In conclusion, it is the first, computation system of DCS that provides document form, document number, and approval line. Second, ANSIM increases the productivity of performance that can be recognized the document work-flow of oneself and all participants. Finally, a plenty of experience and knowledge of nuclear technology can be transmitted to next generation for the design, manufacturing, testing, installation, and commissioning. Though this, ANSIM is expected to allow the export of a knowledge and information system as well as a research reactor.

A 2D axisymmetric numerical analysis was performed to study the characteristics of charge process inside solar thermal storage tank. The interfacial area density and inertial resistance of filler material are selected as simulation parameters. The interfacial area density is varied as 800, 2000, and 4000 1/m. The inertial resistance is varied as 1, 3, and 5 1/m. When the interfacial area density increases from 800 to 4000 1/m, the discrepancy of the temperature distributions between the filler and heat transfer fluid decreases. As inertial resistance increases from 1 to 5, both of the temperature and fluid flow pattern changes considerably.

Numerical analysis of the electric vehicle battery was performed for the optimization of the thermal management under various operating conditions. For the analysis of internal flow and temperature distributions under the different operating conditions of battery, the battery system which was packed 18 battery cell with -25℃∼ 65℃ operating temperature range was considered, and the air flow rate, velocity, and ambient temperature conditions were varied and compared. It was revealed that the cooling system for battery was necessary to maintain its performance for hot ambient conditions. Especially, in this condition, at least 90m3/h of air flow rate are required to maintain the module temperature under 40℃. However, heating system of battery for cold ambient conditions doesn't need.

By increasing the flow rate of near the river the water level increases. Due to the increased water level, damage occurs in the revetment. In this paper, In oder to estimate the amount of overtopping rate in the revetment near the river the numerical mode