Recently, Live-Virtual-Constructive (L-V-C) integrate training system has proposed as a solution for the problems such as limitation of training areas, increase of mission complexity, rise in oil prices. In order to integrate each training system into the one effectively, we should solve the issue about stress of pilots by the environmental differences between Live and Virtual simulation which could be occurred when each system is connected together. Although it was already examined in previous study that the psychological effects on pilots was occurred by the environmental differences between actual and simulated flights, the study did not include what the causal factors affecting psychological effects are. The aim of this study is to examine which environmental factors that cause pilots’ psychological effects. This study analyzed the biochemical stress hormone, cortisol to measure the pilots’ psychological effects and cortisol was measured using Enzyme-linked immunoassay (EIA). A total of 40 pilots participated in the experiment to compare the differences in pilots’ cortisol response among live simulation, virtual simulation, and the virtual simulation applying three environmental factors (gravity force, noise, and equipment) respectively. As a result, there were significant differences in cortisol level when applied the gravity force and equipment factors to the virtual simulation, while there was no significant difference in the case of the noise factor. The results from this study can be used as a basis for the future research on how to make L-V system by providing minimum linkage errors and design the virtual simulator that can reduce the differences in the pilots’ psychological effects.

This paper reviewed the effect of job burnout on safety outcomes, and the moderating effect of safety climate in Korean Air Force. The prevalence of burnout in air force pilots has not been determined and reviewed. It is also unknown whether pilots’ burnout may affect their safety outcomes(safety action & compliance). The primary objective of this study was to determine the prevalence of burnout and it’s effect on safety outcomes. For cross-sectional survey, 910 questionnaires were sent to pilots in air force, and 722 questionnaires among them were returned effectively. The questionnaire was divided into 4 parts examining pilots’ demographic factors, job burnout, safety outcomes, and safety climates. To test and review proposed hypotheses, hierarchical multiple regression analysis was used. The results of statistical analysis appeared as follow; 1) EE(emotional exhaustion) and RPA(reduced personal accomplishment) effected negatively on safety action. 2) EE and RPA effected negatively on safety compliance. 3) EE effected more positively on safety action in higher SS(superior support) group than in lower SS group. 4) RPA effected more positively on safety compliance in higher SS(superior support) group than in lower SS group. 5) RPA effected more positively on safety action in higher CW(coworker support) group than in lower CW group.

본 연구에서는 선미형상을 고려한 조종성능을 심수역 뿐만 아니라 천수역에 대해서 수치 시뮬레이션을 통해 검토하였다. 선미형상을 나타내는 파라메터 중 Cwa를 미소(±2%)하게 변화시킴으로써 각 수역에서의 침로안정성, 선회 및 지그재그 성능이 어떤 변화를 보이고 그 경향이 어떻게 변화하는 지를 검토하였다. 선박의 조종성능 관점에서 흘수 대 수심의 비(=d/H)가 0.5 부근에서의 조종성에 큰 변화를 가져오는 중요 지점임을 알 수 있었고, 비대선(VLCC, 탱커 등)과 세장선(컨테이너)의 경우 선미형상의 변화에 따라 조종성능의 변화 정도가 많은 차이를 가질 수 있음을 알 수 있었다. 또한, Cwa를 감소(U형에 근접)시키면 선회운동에 있어서 advance 및 tactical diameter가 증가하고, 지그재그 운동에서는 track reach는 증가하지만 각 overshoot angle들은 감소한다. 이와 반대로, Cwa를 증가(V형에 근접)시키면 선회운동에 있어서 advance 및 tactical diameter는 감소, 지그재그 운동에서는 track reach는 감소, 각 overshoot angle 들은 증가함을 알 수 있었다.

This study aims to investigate test-retest reliability or reproducibility of the paper-pencil test for investigating stereotypes of seven principal controls of passenger cars. The controls include wiper, head light, high beam, door window, ignition key, door key and door lock. Sixty two college-aged students participated in the paper-pencil tests and the tests were conducted twice with an in-between period of 4 weeks. The results showed that the stereotypes of motion-directions for the seven controls by the two paper-pencil tests were the same, and that the percentage agreements between two tests by subjects were ranged from 60.0% to 80.6%. There was a weak linear relationship between averaged rates of responses for the stereotypes of motion-directions for the seven controls and percentage agreements by subjects. Based on these results, it is concluded that the paper-pencil test collects reliable or reproducible data on the stereotypes of motion-directions for passenger cars’ controls within four weeks.

This study is intended to provide navigator with specific information necessary to assist the avoidance of collision and the operation of ships to evaluate the maneuverability of dead weight tonnage 8,000 tons Oil/Chemical tanker. The actual maneuvering characteristics of ship can be adequately judged from the results of typical ship trials. Author carried out sea trials based full scale for turning test, Z” maneuvering test, man overboard rescue maneuver test, inertia stopping test. Consequently, 2st Overshoot yaw angle of the semi balanced rudder and flap rudder in ±20° zig–zag test showed 22.2° and 18.0°, respectively. The maneuverability of the vessel was good in the flap rudder. The man overboard rescue maneuver maneuverability test was most favorable in the flap rudder and the full load condition. The results from tests could be compared directly with the standards of maneuverability of IMO and consequently the maneuvering qualities of the ship is full satisfied with its.

This paper reviewed the relationship between job demands and safety motivation, and the moderating effect of A-type trait in Korean Air Force. Based on the responses from 722 responses, the results of multiple regression analysis appeared as follow; 1) role overload effects positively and role ambiguity effects negatively on intrinsic safety motivation. 2) role conflict effects negatively on extrinsic safety motivation. 3) role ambiguity effects negatively on intrinsic safety motivation in B-type than in A-type trait.

In an attempt to improve the maneuvering character of hull form renovated tuna purse seiner. A renovation was carried out on the 3 tuna purse seiner fishing vessel. To grasp the progress of maneuvering and resistance on ship B (730 ton class), new bulbous bow was only attached. The ship A (740 ton class) and C (600 ton class) were modified for new bulbous bow, enlarged slipway and rudder. And then the zigzag and the turning test were carried out. According to the turning test, the advance and the tactical diameter were improved very much for the modified ship. The sea trial was carried out for the original and modified ship A. It is showed that the results of sea trial corresponded with that of the tank test on the whole. In the result of the zigzag test on ship B, the turning ability was improved very much, but the yaw checking ability was deteriorated in just some degree. In the result of the zigzag test on ship C, the turning ability and yaw checking ability were remarkably improved. Ship C was greatly improved among the three ships for the maneuvering character of modified hull form.

Recently, Korea Air Force has been facing a lot of problems in its pilot training system such as training time shortage due to the expensive gas price, noise pollution and difficulties in finding airspace for training. To tackle these problems, a new training system (called L-V training system) using both aircraft and its simulator has been suggested. In the system, a data link is established between aircraft and simulator to exchange their flight information. Using the flight information of simulator, aircraft can perform various air missions with or against imaginary aircraft (i.e., simulator). For this system, it is crucially important that fair fighting condition has to be guaranteed between aircraft and simulator. In this paper, we suggested an approach to impose a maneuvering restriction to simulator in order to provide fair fighting condition between aircraft and simulator.

The purposes of this study are to survey stereotypes of control-display relationships for seven principal controls in passenger cars using the paper-pencil and hardware tests, and to examine stereotype strength of the paper-pencil test through comparing the stereotypes for the controls derived by the two methods. Ninety two and 60 college-aged students participated in the paper-pencil test and the real car simulation of the hardware test, respectively. There are dominant motion-directions for all controls in the paper-pencil test, while in the hardware test, there are dominant motion-directions for six controls including head light, high beam, door window, ignition key, door key and door lock controls. The stereotypes of motion-directions for six controls obtained by the paper-pencil test were the same as or similar to those by the hardware test. It was inferred from this that the congruence of the stereotypes by the two methods might be attributed to two simple motion-direction principles of 'clockwise for increase' and 'upward for increase.' Although it is known that the hardware test would be best for obtaining accurate stereotypes between controls and displays, this study implies that if the paper-pencil test is well designed, the paper-pencil test can produce the same results as the hardware test at low cost and without consuming time.

파랑 중 선박의 직진성능을 시뮬레이션을 통하여 비교 검토하였다. 시뮬레이션을 구성하기위해 선박의 3자유도 조종운동방정식을 사용했으며, 선박에 가해지는 파랑강제력은 3차원 특이점 분포법을 사용하여 계산하였다. 시뮬레이션의 외란으로서 규칙파와 불규칙파를 사용하였고 최대사용타각과 제어시간지연을 제어기의 제한조건으로 설정하였다. 조종성능에 따른 직진성능을 검토하기 위해 유체력 미계수를 인위적으로 변화시킴으로서 조종성능이 다른 선박의 시뮬레이션을 구성하였다. Autopilot제어기를 사용한 일정시간의 선박의 직진 시뮬레이션을 수행하고 해당시간동안의 직진거리를 비교하여 선박의 직진성능을 검토하였다.

해상에서는 선박 운항과 관련하여 크고 작은 해양사고가 지속적으로 발생하고 있으며, 이러한 해양사고는 소중한 인명의 사상과 재산상의 손실뿐만 아니라 심각한 해양환경 오염 피해를 유발하고 있다. 그리고 해상물동량 증가 및 교통 환경의 복잡화에 따른 해양사고 발생 개연성 및 사고로 인하여 해양오염 피해가 증가하고 있는 것 또한 사실이다. 최근 우리나라에서는 이러한 해상에서의 해상교통 안전성 평가를 위하여 대상해역에서의 해상교통환경과 관련된 일반적인 정보 및 위험도 정보를 제공하고, 해상교통환경 평가를 통한 해역 위험도 여부를 평가할 수 있는 평가지표 개발이 진행 중이다. 본 연구에서는 선박운항자의 위험의식을 바탕으로 하여 다양한 운항 조건에서 선박운항을 재현할 수 있는 선박조종 시뮬레이션을 이용하여 해상교통 평가의 유효성을 확인하고자 하였다. 이러한 시뮬레이션 결과에 대한 주관적 위험도의 측정이 통항선박의 해상교통 평가의 유효성을 대표하는지를 확인하기 위하여 분산분석법을 이용하여 선박운항자의 특성과 선박간 거리, 속력, 조우형태와 같은 각 요소들 간에 차이가 존재하는지를 분석하였다. 또한 각 요소들 간의 위험도 차이 정도를 다중비교를 통하여 분석하여 위험도 차이를 통계적 측면에서 수치의 변화를 확인할 수 있었다.

The aims of this study are to investigate stereotypes of motion-direction and real motion-directions for seven principal controls in passenger cars, and to compare the stereotypes and real motion-directions for the controls. The stereotypes were obtained by using questionnaire survey, in which 385 subjects participated. The real motion-direction data were gathered for 64 passenger cars including RVs and SUVs. The results showed that while there are dominant motion-directions for head light, door key and door lock controls, dominant motion-directions are not found for other controls investigated in this study. The stereotypes of motion-directions for seven controls obtained in this study were much different from those of the real data. Furthermore, the stereotypes for wiper, head light and high beam controls based on the questionnaire survey were opposite to the real motion-directions.

최근 해상교통안전진단제도가 국내에 도입되면서 선박의 안전여부를 판별하는 중요한 핵심 기술 요소로 다양한 항행 환경을 인위적으로 재현하는 선박조종시뮬레이션이 활용되고 있다. 그러나 현행 시행지침에 명시된 진단기술은 국내 시뮬레이터 보유 기관에서 공통적으로 활용하고 있는 수행 절차 및 평가 방법 등을 일반화한 것으로 이에 대한 적절한 보완 또는 개선이 필요하다. 본 연구는 현행 선박조종시뮬레이션 진단기술의 기술력 분석과 함께 한계점 및 문제점 등의 적정성 평가를 수행하였다. 또한 선박조종시뮬레이션 선박모델의 표준화, 표준조선법, 평가 방법 등의 고도화 방안을 제시하였다. 이러한 연구 결과는 선박조종시뮬레이터 시스템 개선은 물론 해상교통안전진단제도에 활용되고 있는 진단 기술의 정량화 및 신뢰성 향상에 기여할 것으로 사료된다.

선박 성능과 항해 안전의 관점에서 선박조종 특성을 아는 것은 선박 설계에서 중요한 일이다. IMO 규정에 의하면 만재 적하된 even 조건(트림=0)에서 몇가지 선박 조종 기준이 제시되어 있다. 그러나 선박은 일반적으로 항상 만재 적재 조건으로 운항되지 않는다. 따라서 선박이 IMO 규정을 만족시키고, 모든 적재 조건에서 안전하게 항행하도록 하기 위해 다양한 적재 조건에서 선박 조종 특성을 추정해야 한다. 본 논문에서 우리는 실선 실험과 시뮬레이션을 수행하여 조종특성을 조사하였다. 시뮬레이션 결과와 비교하였을 때 실선실험은 시뮬레이션 값 및 이전 연구와 그 경향이 일치한다. 실 해역에서 얻은 조종실험 데이터가 선박 조종성능 추정에 활용 될 수 있음을 확인하였고, 실시한 실해역 실험을 통하여, 선박 운항 상태에 따른 조종성의 변화를 추정할 수 있었다.

콴다 효과를 이용한 고 양력 타가 선박의 조종성능에 미치는 영향을 평가하기 위하여 모형선 선회 시험을 수행하였다. 대상선은 47K PC선이며 1/85 스케일의 2m급 모형선을 이용하였다. 모형선 선회시험시스템은 모형선, 콴다 타, Jet 분사 시스템 및 타 구동장치 등으로 구성된 다. 모형선 선회 시험 결과, 고 양력타에 의한 타력 증가가 선박의 선회성능 향상에 효과적인 것을 확인하였다.