This study aims to provide a real-time information to the driver by effectively operating the advanced safety device attached to the freight vehicle, thereby minimizing insecure behavior of the driver such as speeding, rapid acceleration, sudden braking, And improve driving habits to prevent accidents and save energy. Advanced safety equipment is a device that warns the driver that the vehicle leaves the driving lane regardless of the intention of the driver and reduces the risk of traffic accidents by mitigating or avoiding collision by detecting a frontal collision during driving.The main contents of this report are as follows: In case of installing a warning device on a lane departing vehicle (excluding a light vehicle) and a lorry or special vehicle with a total weight exceeding 3.5 tonnes, the driver must continue to operate unless the driver releases the function.In addition, when the automatic emergency braking system is installed, the structure should be such that the braking device is operated automatically after warning the driver when the risk of collision with the running or stopped vehicle in the same direction is detected in front of the driving lane.

This study aims to provide a real-time information to the driver by effectively operating the advanced safety device attached to the freight vehicle, thereby minimizing insecure behavior of the driver such as speeding, rapid acceleration, sudden braking, And improve driving habits to prevent accidents and save energy. Advanced safety equipment is a device that warns the driver that the vehicle leaves the driving lane regardless of the intention of the driver and reduces the risk of traffic accidents by mitigating or avoiding collision by detecting a frontal collision during driving.The main contents of this report are as follows: In case of installing a warning device on a lane departing vehicle (excluding a light vehicle) and a lorry or special vehicle with a total weight exceeding 3.5 tonnes, the driver must continue to operate unless the driver releases the function.In addition, when the automatic emergency braking system is installed, the structure should be such that the braking device is operated automatically after warning the driver when the risk of collision with the running or stopped vehicle in the same direction is detected in front of the driving lane.

철도교통은 기술적, 사회적, 문화적 환경의 변화 및 고속철도의 확장과 철도 구조개혁 등으로 현장에서의 인적요인으로 인한 오류가 증가로 안전을 위협하는 요소가 날로 증가하는 추세로 안전신뢰성 확보는 절대적이다. 따라서 인적오류를 근절하기 위한 안전시스템의 적정성 및 신뢰도에 대한 분석과 해외 선진철도의 안전정책 및 안전시스템의 변화와 발전 추세를 분석하여 국내 철도안전의 방향을 제시하고자 한다.

It is a system that supports efficient sharing of information by real-time communication through application and web-based collaborative work space. IOT / ICT technology into the construction site to manage the entire process in real time. It is possible to predict and prevent accidents by using real time accumulated big data information, and it is necessary to diversify research using data.

This study explored the risk assessment framework of multi-story piping system installed in critical facilities, in particular, seismically base-isolated building systems. In order to understand the seismic performance of multi-story piping system, OpenSees platform was used in this study. Also, Triple Friction Pendulum Bearing as a seismic base isolator was conducted in OpenSees. The focus of this study was on the development of seismic fragility or vulnerability of seismically isolated piping system.

As the demand for automation (or autonmation) or clean workplace has grown, the interest in the knowledge and skill regarding safety is rising in manager duty. Moreover, the importance of severity rate of injury has increased due to the enlargement of industry scale, even safety management area has developed. Thus, it is important that production managers, the core of the line process, realize the safety in their production line, even if a safety manager acts as a staff. However, in the duty oriented National Competency Standard (NCS), the education about the safety duty of production management part is insufficient. According to NCS, it is calculated production managers receive only 6.7% of whole safety education regarding the duty related the safety management for production manager in mechanical industry. However, the ability in safety is more demanded from production managers as the concept of “production and safety” turns into the concept of “production with safety”. And then in this paper, we will compare and analyze the safety management duty in Korean NCS and the safety management duty in State Leaders Connecting Learning to Work in US manufacturing industry, in terms of the duty of the production manage in mechanical industry (05). And, we will develop the safety duty education system for production manager, by classifying the safety education in domestic mechanical industry into knowledge education, skill education, and attitude education with using AHP(Analytic Hierarchy Process).

This paper addresses the problem of how to effectively use virtual reality(VR) for improving the quality of safety training systems. As the working environment and the working system in the industry are more and more complex and large-scaled, the concern with system safety is accordingly growing. Safety training systems are regarded as an effective way for increasing workers’ interest in system safety and enhancing their ability of preventing and handling accidents/incidents. Recently, it has been reported that VR would be effectively used for improving the quality of safety training systems, with its technically specialized features. However, little attention has been given to the problem of how to effectively use VR for safety training systems. In order to make the best use of new technology such as VR, it is important to examine its advantages and disadvantages and the contexts to which its use can be beneficial. This paper firstly reviews the current status of safety training systems and the use of VR for safety training systems in the inside and outside of the country. Next, we summarize the interview with safety managers in four manufacturing companies, which was conducted to understand the requirements of stake-holders of the issue. Based on the review and the interview, we suggested the ways of using VR in safety training systems in an effective manner. They are described from the four perspectives: development and maintenance cost, lack of specialized workers, design of accident scenarios used with VR, and empirical demonstration of the effectiveness of VR in safety training.

The train-centric control systems development has some distinct points in that a big size of government budget is in general expended in there and the development duration seems to be long. In addition, the changes are ever made continuously in the capability and operational requirements for Trains. Thus, the impact of the potential changes in the required operational capability on the development activities can induce some type of project risks [7]. As such, proper management of project risk has been one of crucial subjects in the train systems development. All these notes combined together make it the significance of the safety management process be raised further up in the train-centric control systems development. As such, the underlying safety management process should be capable of appropriately handling the potential risks that can be created due to the unexpected changes and the long-term development period. The process should also be complemented for the safety consideration of train-centric control systems, for instance, stop. To study these aspect is the objective of the paper. To do so, a step-by-step approach to analyzing the safety management process is first presented. Then, to enhance the process some necessary and useful activities are added in terms of risk and safety management. Then, to pursue some enhancement on the process, a set of necessary and useful activities are added in terms of risk and safety management. The resultant process is further analyzed and tailored using a design structure matrix method. The resultant process is applied in a train-centric control development as a case study.

Project management is a tool for smooth operation during a full cycle from the design to normal operation including the schedule, document, and budget management, and document management is an important work for big projects such as the JRTR (Jordan Research and Training Reactor). To manage the various large documents for a research reactor, a project management system was resolved, a project procedure manual was prepared, and a document control system was established. The ANSIM (Advanced Nuclear Safety Information Management) system consists of a document management folder, document container folder, project management folder, organization management folder, and EPC (Engineering, Procurement and Construction) document folder. First, the system composition is a computerized version of the Inter-office Correspondence (IOC), the Document Distribution for Agreement (DDA), Design Documents, and Project Manager Memorandum (PM Memo) works prepared for the research reactor design. Second, it reviews, distributes, and approves design documents in the system and approves those documents to register and supply them to the research reactor user. Third, it integrates the information of the document system-using organization and its members, as well as users’ rights regarding the ANSIM document system. Throughout these functions, the ANSIM system has been contributing to the vitalization of united research. Not only did the ANSIM system realize a design document input, data load, and search system and manage KAERI’s long-period experience and knowledge information properties using a management strategy, but in doing so, it also contributed to research activation and will actively help in the construction of other nuclear facilities and exports abroad.

본 연구는 지능형 교통시스템(ITS)이 도로교통안전에 미치는 영향을 분석하고 국내외 ITS 기술동향을 설명하였으며, 향후 도로교통안전을 위한 ITS 산업이 나아가야 할 정책적 방향을 제안하였습니다. 교통안 전을 위한 ITS 발전 전략은 크게 다섯 가지 정도로 제언되었습니다. 첫 번째, ITS 기반시설에 대한 정부의 연구개발 지원이 규모/범위의 경제효과를 고려한 선택&집중이 필요하며, 두 번째, 교통안전 증진을 위해 서 고속도로 이외에 ITS 인프라의 지속적인 구축이 필요하다는 것이 강조 되었습니다. 세 번째, 도로-차 량이 양방향으로 연결된 V2X 기술의 선진국 수준의 연구개발 증가 및 상용화 필요가 강조되었으며, 네 번 째, ITS 인프라 구축 투자와 동시에 운전자의 직접적인 안전과 연계된 교통안전관리증가를 위한 선제적 기 술개발이 필요함이 제기되었습니다. 마지막으로, 급격한 인구구조가 야기하는 고령화 사회에 대비하여 고 령운전자를 배려한 미래지향적 고령자 교통시스템의 기술개발이 시급한 시점으로 제안되었습니다.

도로 포장 및 교면 포장의 노후화로 인해 이에 대한 보수는 지속적으로 이루어지고 있고 매년 증가하고 있다. 도로 및 교량의 유지보수는 교통량이 많은 낮 시간보다는 교통량이 상대적으로 적은 야간에 주로 수행되고, 교통량이 다시 많아지는 시간 이전에 신속히 마무리하고 교통개방을 해야 하기 때문에 노무자 의 인력관리 및 안전관리를 체계적으로 수행하기가 쉽지 않다. 본 연구는 주로 야간에 주어진 시간 내에 신속히 작업을 수행해야하는 유지보수공정에 대하여 노무자 의 업무 및 안전을 체계적으로 관리하기 위해 실시간 위치정보 시스템을 구축하고, 현장에 시범 적용하여 그 가능성을 살펴보았다. 유지보수 현장에 총 8개의 고정식 노드를 설치하고 작업자의 안전모에 이동식 노드를 설치하여 현장에서 노무자의 작업 패턴을 충분히 확인할 수 있었다. 그리고 시스템 상에서 현장을 1m 격자로 구분하고 위험지역을 시스템 상에서 부여하여 노무자가 위험지역을 진입할 경우 이를 실시간 으로 확인하고 위험여부를 통보 가능함을 확인하였다.