Carbon black is a material in the form of fine black powder obtained by incomplete combustion or pyrolysis of hydrocarbons, and is composed of 90-99% carbon, and the rest is composed of hydrogen and oxygen. In the event of an emergency during the manufacture of carbon black, the generated tail gas should be safely discharged through an emergency line to prevent fire, explosion, and environmental pollution accidents caused by the tail gas. If the pressure continues to rise, the pressure control valve shall operate and the rupture plate shall be ruptured sequentially and the tail gas shall be discharged to the vent stack through the emergency line. As an emergency emission system, even if some untreated substances in the tail gas are released into the atmosphere, they are lighter than air, so it is safe to discharge them to a safe place through the Vent Stack. If the gas pressure is rising or worse, it is discharged from the Vent Stackine, and discharging fuel.

이 연구는 식품제조업과 음료제조업에 속한 1,045개의 기업에 대한 재무제표 패널자료를 이용하여 한계기업으로의 전락에 영향을 주는 요인을 분석하였다. 한계기업의 식별 기준으로 이자보상배율이 3년 연속 1보다 작을 경우를 선택하였다. 패널 프로빗 모형의 추정 결과에 따르면, 개별 기업의 성장성 하락은 한계기업으로 전락할 확률을 높이는 반면, 수익성이나 활동성 지표의 상승은 한계기업으로 전락할 확률을 유의미하게 낮추는 것으로 분석되었다. 또한 타인자본 비중이 늘어나거나 또는 차입금의존도가 높은 기업일수록, 한계기업으로 전락할 확률이 높았다. 기업의 유동성 또한 한계기업으로의 전락 확률에 유의미한 영향을 주었다. 기업 규모도 한계기업 여부와 연관되었는데, 소기업이 대기업에 비해 한계기업으로 전락할 확률이 상대적으로 높았다.

Purpose: The purpose of this study is to understand the nature of the health promotion behavior of the high-risk group of cardiovascular disease among large-scale industrial manufacturing workers. Method: The subjects of this study were 11 workers at high-risk of cardiovascular disease with a Framingham Risk Score (FRS) score of 10% or more among workers at large-scale workplace in Gyeongsangbukdo area, and the data collection period is from July 1 to September 11, 2022. The interview data were inductively analyzed using the qualitative content analysis method used by Elo and Kyngas (2008). Result: Participants' awareness of their own health status and knowledge of cardiovascular disease were low, and there were more obstacles than benefits to health behavior. The process and method of realizing and practicing health care were also different. As a result of qualitative content analysis, 42 semantic units, 12 subcategories, and 3 upper categories were derived. The health promotion behavior of workers at high-risk for cardiovascular disease was categorized into ‘Awareness of health conditions’, ‘Obstacles to health care behavior’, ‘Health care practice process’. Conclusion: Since most of the workers spend a lot of time at work, it is necessary to understand the health care of high-risk workers with cardiovascular disease, so a qualitative study using participatory observation methods to observe workers’ work sites is recommended.

Recently, there has been an increasing attempt to replace defect detection inspections in the manufacturing industry using deep learning techniques. However, obtaining substantial high-quality labeled data to enhance the performance of deep learning models entails economic and temporal constraints. As a solution for this problem, semi-supervised learning, using a limited amount of labeled data, has been gaining traction. This study assesses the effectiveness of semi-supervised learning in the defect detection process of manufacturing using the MixMatch algorithm. The MixMatch algorithm incorporates three dominant paradigms in the semi-supervised field: Consistency regularization, Entropy minimization, and Generic regularization. The performance of semi-supervised learning based on the MixMatch algorithm was compared with that of supervised learning using defect image data from the metal casting process. For the experiments, the ratio of labeled data was adjusted to 5%, 10%, 25%, and 50% of the total data. At a labeled data ratio of 5%, semi-supervised learning achieved a classification accuracy of 90.19%, outperforming supervised learning by approximately 22%p. At a 10% ratio, it surpassed supervised learning by around 8%p, achieving a 92.89% accuracy. These results demonstrate that semi-supervised learning can achieve significant outcomes even with a very limited amount of labeled data, suggesting its invaluable application in real-world research and industrial settings where labeled data is limited.

Mid-sized manufacturing companies, which account for 0.7%(5,480 companies), 13.8%(1.169 million persons) of total employment, and 15.7% of total sales, have recently experienced a lot of difficulties in management activities due to the impact of COVID-19, the U.S.-China trade war, and the collapse of global supply chains. To overcome this, revitalization of quality management activities to strengthen corporate competitiveness is emerging as an urgent task. In order for these quality management activities to achieve their intended purpose, the positive leadership of corporate managers is very important above all else. There have been many studies related to positive leadership, but most have focused on charismatic leadership and transformational leadership centered on large companies or small and medium-sized enterprises. Therefore, this study aims to present ways to strengthen the leadership of managers by empirically analyzing how the positive leadership of managers of mid-sized manufacturing companies, which was relatively under-researched, affects quality management activities and Business performance(Balanced Score Card; BSC).

This study investigated the quality characteristics and optimal conditions of noodles produced by adding Baromi 2 Garu floury rice to wheat flour. The lightness of samples with floury rice increased, while the lightness (L*), redness (a*), and yellowness (b*) decreased after cooking compared to before cooking. The weight, volume, and moisture absorption rate of cooked noodles decreased compared to wheat, but turbidity increased as the amount of rice flour increased. In addition, compared to the control with 20% rice flour, GR-20 (flour replacement by 20% Garu floury rice) with floury rice had lower turbidity, showing less cooking loss. The hardness, gumminess, and chewiness of noodles with floury rice decreased as the floury rice content increased, while springiness, cohesiveness, and adhesiveness increased. The elongation force and distance decreased as the amount of floury rice increased. Therefore, the optimal amount of floury rice to replace wheat flour would be 20%. Adding excessive amounts of floury rice to processed foods requires additional processes, such as adding food additives or changing the processing method to control physical properties.

This study investigates the influence of the type of lipid phase (corn oil [CO], palm oil [PO], MCT oil [MO], lemon oil [LO]) on the physical characteristics and bioactive peptide (BP) encapsulation in food-grade water-in-oil-in-water (W/O/W) double emulsions. The stabilities of the double emulsions were analyzed for droplet size characteristics, viscosity, dynamic rheological properties, encapsulation efficiency (EE), and release rate of BP (at different temperatures: 4, 25, 37, and 60oC) for 28 days. The encapsulated BP acts as an active substance in the osmotic balance and destabilization of the double emulsion system. For the effect of the oil phase, double emulsions prepared with PO showed the best droplet stability without phase separation (D50 < 1 m) and high BP retention (EE > 60%). In the release rate at high temperatures (60oC), the BP released from double emulsions was in the order of MO > CO > LO > PO over time. In contrast, the BP release from double emulsions at low temperatures (< 37oC) had no difference depending on the oil type. Therefore, the information obtained from this work is useful for preparing stable, functional food or cosmetic products from double emulsions using a BP.

This study investigated the changes in the cyanogenic glycoside (CN-Glc) content of maesil chung (MC) prepared according to its preparation conditions (i.e., maesil part, sugar type, maesil-sugar mixing ratio, liquid separation) and sugaring-ripening period and the quality characteristics of their products finalized through filtration and heat treatment (85oC, 30 min) with the 6-month ripened MC. The CN-Glc content dramatically decreased when the maesil flesh, isomaltooligosaccharide, maesil:sugar ratio of 5:5, and liquid separation after the 4-month sugaring were applied to the MC production. The CN-Glc content decreased with the ripening period. There was no effect of filtration and heat treatment on the CN-Glc reduction of the MC product. The sugar type predominantly affected the soluble solid and total carbohydrate content of the MC products, and their contents increased in the order of high-fructose corn syrup > sucrose > isomaltooligosaccharide. The MC product at a maesil:sugar ratio of 6:4 exhibited the higher organic acid content. There was no direct association between the total polyphenolic compound content and the preparation conditions of the MC product. Overall, the use of maesil flesh as a maesil ingredient and more than 6-month ripening after liquid separation may be a pivotal factor in producing the cyanogenic glycoside-reduced maesil chung.

The objective of this study was to investigate changes in the cyanogenic glycoside (CN-Glc) content of apricot and plum chungs over the sugaring-ripening period and to evaluate their quality characteristics. The whole and flesh parts of the apricot and plum were mixed with sugar to a mixing ratio of 1:1 (w/w) to prepare their chungs, after which the fruit-sugar mixtures were stored for 13 months. The CN-Glc content dramatically increased within 3-4 months, reached the maximum, and gradually decreased over storage by 13 months. The apricot and plum chungs with seeds exhibited much higher CN-Glc contents than those without seeds. All chungs stored for 10 months were filtrated and treated for 30 min at 85oC to measure their quality characteristics. Similar soluble solid contents (53.4- 53.6oBx) were found in all chungs. The apricot and plum chungs without seeds exhibited the higher concentrations of total carbohydrate, organic acid, and total polyphenolic compounds than those with seeds. In addition, the color of the apricot and plum chungs without seeds was darker and deeper yellow than those with seeds. Overall, the apricot and plum flesh may be better for producing the stone fruit chungs with minimal CN-Glc content and better nutrition.

This study focuses on heat-induced gelation of pea (Pisum sativum L.) proteins to assess the potential of pea protein aggregates (PPA) as novel plant-based meat alternatives. The microstructural (SEM, CLSM), mechanical (TPA analysis), and rheological properties (G', G'') of heat-induced gels at pH 2 were systematically investigated as a function of a different pea protein concentration (7.5, 10, 12.5%) and a varying heating time (1, 3, 6, 16 h). The result showed that PPA formation at higher protein concentration and heating time contributed to a homogenous and compact heat-induced gel formation. Such gel network strengthened mechanical properties in terms of high gel hardness (40 g) and elastic texture (2.7 mm springiness). For the rheological studies, the storage modulus (G') showed an increase during both the heating and cooling phases and then stabilized during the cooled-holding phase. This suggested that the formation of durable and stable gel was induced due to the decreased mobility of protein aggregates at low temperatures. Therefore, the PPA is indicated as a potential additive for enhancing the food texture quality in the plant-based meat food industry.