The microstructures and mechanical properties of Dual Phase (DP), Transformation-Induced Plasticity (TRIP), and Quenching & Partitioning (Q&P) steels were investigated in order to define the strengthening mechanism of 0.2 C steel. An intercritical annealing between Ac1 and Ac3 was conducted to produce DP and TRIP steel, followed by quenching the DP and TRIP steel being quenched at to room temperature and by the TRIP steel being austemperingaustempered-air cooling cooled the steel toat room temperature, respectively. The Q&P steel was produced from full austenization, followed by quenching to the temperature between Ms and Mf, and then enriching the carbon to stabilize the austenite throughout the heat treatment. For the DP and TRIP steels, as the intercritical annealing temperature increased, the tensile strength increased and the elongation decreased. The strength variation was due to the amount of hard phases, i.e., martensite and bainite, respectively in the DP and TRIP steels. It was also found that the elongation also decreased with the amount of soft ferrite in the DP and TRIP steels and with the amount of the that was retained in the austenite phasein the TRIP steel, respectively for the DP and TRIP steels. For the Q&P steel, as the partitioning time increased, the elongation and the tensile strength increased slightly. This was due to the stabilized austenite that was enriched with carbon, even when the amount of retained austenite decreased as the partitioning time increased from 30 seconds to 100 seconds.

We measured the non-carbon content of single-walled carbon nanotubes (SWCNTs) in SWCNT soot using thermogravimetric analysis. The weight increased percentage by the oxidation of metal in the raw soot is well obtained by TGA graph which was confirmed with ICP-AES, XRD, and XPS. This work will be very useful for the purity precise evaluation of SWCNT with UN-vis-NIR spectroscopy.

Carbon contamination from the binder resin is an inherent problem with the metal powder injection molding process. Residual carbon in the W-Cu compacts has a strong impact on the thermal and electric properties. In this study, uncertainty was quantified to evaluate determination of carbon in a W-15%Cu MIM body by the combustition method. For a valid generalization about this evaluation, uncertainty scheme applied even to the repeatability as well as the uncertainty sources of each analyse step and quality appraisal sources. As a result, the concentration of carbon in the W-Cu part were measured as 0.062% with expanded uncertainty of 0.003% at 95% level. This evaluation example may be useful to uncertainty evaluation for other MIM products.

동일 운전 조건에서 폴리이서술폰 중공사 분리막을 이용하여 혼합 기체로부터 이산화탄소 분리 실험과 수치해석으로 얻어진 결과를 비교하였다. 순수한 기체의 투과도로부터 구한 이상 선택도를 활용한 예측값과 실험값이 많은 차이 가 있음을 확인할 수 있었다. 그러나 이산화탄소 투과도와 선택도를 혼합 기체 분리 실험 결과로부터 구한 후 공급 이산화탄소 몰 분율, 공급 압력과 투과측 압력의 함수로서 투과도와 선택도를 얻을 경우 수치해석 예측값과 실험값이 잘 일치하는 것을 확인하였다.

배기가스로부터 폴리이서술폰 분리막을 이용하여 이산화탄소 분리 특성을 수치해석 방법으로 분석하였다. 공급 기체와 투과 기체가 서로 다른 방향으로 흐르는 향류 흐름 시스템에 대한 분리막 공정 지배 방정식을 유한 차분법으로 전개하였으며 Compaq Visual Fortran 6.6 소프트웨어를 이용 공정 모사하였다. 개발된 프로그램을 사용하여 수치해석을 수행한 결과 이산화탄소 투과특성에 영향을 주는 가장 중요한 인자로는 이산화탄소 투과 구동력과 체류시간임을 알 수 있었다. 동일한 조건에서 향류 흐름 공정모사에 의한 투과 측 이산화탄소 농도와 투과량은 병류 흐름 공정모사 결과보다 소폭 증가함을 확인하였다.

본 논문에서는 탄소섬유관으로 구속된 무근 콘크리트 원형 및 각형 기둥에 대한 축하중 및 횡하중 재하 실험을 수행하고, 실험결과를 바탕으로 하여 몬테카를로 해석을 이용한 신뢰성 해석을 수행함으로써 탄소섬유관으로 구속된 무근 콘크리트 원형 및 각형 기둥과 탄소섬유관으로 구속된 철근 콘크리트 원형 및 각형 기둥의 두 가지 경우에 대한 강도저감계수를 예측하였다. 해석 결과, 무근의 경우에는 강도저감계수가 0.7로 예측되었고, 철근이 삽입된 경우에는 강도저감계수가 0.85로 예측 되었다. 이러한 계수값은 원형과 각형인 경우 모두 같은 계수값을 보여주었다.

이산화탄소에 대한 가소화 안정성 및 이산화탄소/질소의 분리특성이 탁월한 폴리이서술폰(PES)중공사 분리막에 의한 이산화탄소 분리특성을 수치해석으로 알아보고자 하였다. 공정변수에 따른 이산화탄소 분리 거동을 예측하기 위하여 공급 기체와 투과기체가 같은 방향으로 흐르는 병류 흐름에 대한 분리막 공정 지배 방정식을 5차 Runge-Kutta-Verner 방법을 사용하여 Compaq Visual Fortran 6.6 소프트웨어를 이용 공정모사 프로그램을 개발하였다. 개발된 프로그램을 사용하여 수치해석을 수행한 결과, 이산화탄소 투과특성에 영향을 주는 가장 중요한 인자로서 공급 이산화탄소 분압, 투과측과 분리막 내부의 압력비 그리고 공급 기체가 분리막 내부에 머무르는 체류 시간임을 알 수 있었다.

Likelihood of failure for the external corrosion of carbon and low alloy steels, which affect to a risk of facilities, was analyzed quantitatively through the risk based inspection using API-581 BRD. We found that the technical module subfactor (TMSF) decreased as the inspection number increased and it increased as the Inspection effectiveness and the used year increased. In this condition, the TMSF showed high value for the case of the marine/cooling tower drift area as a corrosion driver, poor quality of coating, no insulation, and low insulation condition.

탄소섬유쉬트는 경량, 고강도, 우수한 내식성, 그리고 간편한 시공성 때문에 많은 종류의 철근콘크리트 부재의 보강에 사용되고 있다. 그러나 탄소섬유쉬트에 의해 보강된 철근콘크리트 부재의 파괴거동은 탄소섬유쉬트와 콘크리트 표면의 부착특성에 따라 크게 달라진다. 본 연구에서는 탄소섬유쉬트와 콘크리트 사이의 경계면에 링크요소를 이용함으로써 탄소섬유쉬트와 콘크리트 사이의 부착거동의 변화를 고려한 부착응력-미끄럼 모델을 제안하였다. 또한 이 방법의 유효성을 알아보기 위하여 탄소섬유쉬트로 보강된 철근콘크리트 보의 파괴거동에 대한 해석을 실시하여 실험결과와 비교하였다. 그 결과 본 연구에서 제안된 모델을 이용한 해석결과는 실험결과와 비교적 잘 일치함을 알 수 있었다.

This study estimates the greenhouse gases (GHGs) emissions from energy sector of Changwon city from 2012 to 2020 and scenario analysis of GHGs reductions pathways in the context of the goal of 2030 NDC and 2050 carbon neutral scenario in Korea. As a result, the GHG emissions as a reference year of carbon neutral in 2018 were estimated as 8,872,641 tonCO2eq accounting for 3,851,786 tonCO2eq (43.6%) of direct source (scope 1) and 4,975,855 tonCO2eq (56.4%) of indirect source (scope 2). Especially, among indirect sources as purchased electricity, manufacturing sector emitted the largest GHG accounting for 33.0%(2,915 thousands tonCO2eq) of the total emissions from all energy sectors, scenario analysis of GHG reductions potential from the energy was analyzed 8,473,614 tonCO2eq and the residual emissions were 354,027 tonCO2eq. Purchased electricity and industry sector reducted the largest GHG accounting for 58.7%(4,976 thousands tonCO2eq) and 42.1%(3,565 thousands tonCO2eq) of the total emissions from all energy sectors, respectively.

In this study, sediment cores were sampled from tidal flats (six sites) in the west and south coastal wetlands, the blue carbon stock in the tidal flat sediments was calculated, and the blue carbon stock characteristics and influencing factors were analyzed. The sediment particle size of the west coastal tidal flats was larger than that of the south coastal tidal flats, and the organic carbon content in the south coastal tidal flats was more than twice that of the west coastal tidal flats. Blue carbon stock per unit area was 28.4~36.8 Mg/㏊ on the west coastal tidal flats and 69.8~89.8 Mg/㏊ on the south coastal tidal flats, which was more than twice higher in the south coastal tidal flats than in the west coastal tidal flats. The total amount of blue carbon stock in the tidal flats was the highest in Suncheon Bay tidal flats at 153,626 Mg, and followed by Gomso Bay tidal flats at 141,750 Mg, Hampyeong Bay tidal flats at 58,420 Mg, Dongdae Bay tidal flats at 44,900 Mg, Cheonsu Bay tidal flats at 36,880 Mg, and Jinhae Bay tidal flats at 26,205 Mg. Blue carbon stock per unit area was higher in the south coastal tidal flats, but the total amount of blue carbon stock in the tidal flats was higher in the west coast. The slope of the regression function of blue carbon stock with respect to the organic carbon content in the tidal flat sediments was estimated to be about 0.05 to 0.07, and the slope of the regression function was higher in the west coastal tidal flats than in the south coastal tidal flats.

Magnetic activated carbon was prepared by adding a magnetic material to activated carbon that had been prepared from waste citrus peel in Jeju. The adsorption characteristics of an aqueous solution of the antibiotic trimethoprim (TMP) were investigated using the magnetic activated carbon, as an adsorbent, and response surface methodology (RSM). Batch experiments were carried out according to a four-factor Box-Behnken experimental design affecting TMP adsorption with their input parameters (TMP concentration: 50～150 mg/L; pH: 4～10; temperature: 293～323 K; adsorbent dose: 0.05～0.15 g). The significance of the independent variables and their interaction was assessed by ANOVA and t-test statistical techniques. Statistical results showed that TMP concentration was the most effective parameter, compared with others. The adsorption process can be well described by the pseudo-second-order kinetic model. The experimental isotherm data followed the Langmuir isotherm model. The maximum adsorption capacities of TMP, estimated with the Langmuir isotherm model were 115.9-130.5 mg/g at 293-323 K. Also, both the thermodynamic parameters, △H and △G, have both positive values, indicating that the adsorption of TMP by the magnetic activated carbon is an endothermic reaction and proceeds via an involuntary process.

This study aims to identify participating resident awareness of the improvements to forest carbon cycle villages created by the Korea Forest Service by introducing a system for district heating basedon forest biomass in mountainous areas. Hwacheon Forest Carbon Circulation village was established in Paroho-neureup village in Yuchon-ri, Hwacheon-gun between 2011 and 2013. However, its operation has not been smooth due to the increasing number of households rapidly leaving the district heating system. This study surveyed 76 households that participated in the district heating system using forest biomass in the early stages of the project. This includes households participating in the district heating system(participating households) and households not currently participating in the district heating system(withdrawal households) from September 2019. Surveys focused on the process of participating in forest carbon cycle village projects, and satisfaction in local heating and policy requirements. Of the 67 households, excepting those not allowed to participate in the survey due to death or having moved elsewhere, 36 households participated and 31 households the were in the process of leaving the village were also included. As a result, there was a significant difference between participating and exiting households in the motivation and satisfaction level of district heating. The results of this study are expects to reflect the importance of awareness of residents in the operation of the forest carbon cycle village. This will be utilized as an important dataset for improvement as a means to promote the re-entry if outgoing households. It will also help set the direction of the forest town revitalization project, utilizing forest biomass in the future.