검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 1,536

        87.
        2022.10 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        There is ongoing research to develop lithium ion batteries as sustainable energy sources. Because of safety problems, solid state batteries, where electrolytes are replaced with solids, are attracting attention. Sulfide electrolytes, with a high ion conductivity of 103 S/cm or more, have the highest potential performance, but the price of the main materials is high. This study investigated lithium hydride materials, which offer economic advantages and low density. To analyze the change in ion conductivity in polymer electrolyte composites, PVDF, a representative polymer substance was used at a certain mass ratio. XRD, SEM, and BET were performed for metallurgical analyses of the materials, and ion conductivity was calculated through the EIS method. In addition, thermal conductivity was measured to analyze thermal stability, which is a major parameter of lithium ion batteries. As a result, the ion conductivity of LiH was found to be 106 S/cm, and the ion conductivity further decreased as the PVDF ratio increased when the composite was formed.
        4,000원
        88.
        2022.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Environmental issues such as global warming due to fossil fuel use are now major worldwide concerns, and interest in renewable and clean energy is growing. Of the various types of renewable energy, green hydrogen energy has recently attracted attention because of its eco-friendly and high-energy density. Electrochemical water splitting is considered a pollution-free means of producing clean hydrogen and oxygen and in large quantities. The development of non-noble electrocatalysts with low cost and high performance in water splitting has also attracted considerable attention. In this study, we successfully synthesized a NiCo2O4/NF electrode for an oxygen evolution reaction in alkaline water splitting using a hydrothermal method, which was followed by post-heat treatment. The effects of heat treatment on the electrochemical performance of the electrodes were evaluated under different heat-treatment conditions. The optimized NCO/NF-300 electrode showed an overpotential of 416 mV at a high current density of 50 mA/cm2 and a low Tafel slope (49.06 mV dec-1). It also showed excellent stability (due to the large surface area) and the lowest charge transfer resistance (12.59 Ω). The results suggested that our noble-metal free electrodes have great potential for use in developing alkaline electrolysis systems.
        4,000원
        90.
        2022.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, additive manufacturing of a functionally graded material (FGM) as an alternative to joining dissimilar metals is investigated using directed energy deposition (DED). FGM consists of five different layers, which are mixtures of austenitic stainless steel (type 316 L) and low-alloy steel (LAS, ferritic steel) at ratios of 100:0 (A layer), 75:25 (B layer), 50:50 (C layer), 25:75 (D layer), and 0:100 (E layer), respectively, in each deposition layer. The FGM samples are successfully fabricated without cracks or delamination using the DED method, and specimens are characterized using optical and scanning electron microscopy to monitor their microstructures. In layers C and D of the sample, the tensile strength is determined to be very high owing to the formation of ferrite and martensite structures. However, the elongation is high in layers A and B, which contain a large fraction of austenite.
        4,000원
        91.
        2022.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        For this study, we established a system for the CPU cooling performance evaluation and conducted performance tests on air-cooling and water-cooling to understand the effect of the CPU cooling method on performance. For the performance evaluation, the test chamber and water-cooling system were set up, the workload S/W was selected, and a case file was created. In the case of the air-cooling, the CPU temperature is sensitively affected by the outside air temperature, the direction of the board installation, and the influence of the airflow formed around it, and may cause a lot of fluctuations in the CPU temperature. When the water-cooling system was applied, the CPU temperature decreased from 75℃℃ to 37℃ compared to the air-cooled type under the test conditions of 28.5℃ and 3LPM cooling water supply temperature and flow rate. As the CPU clock speed increased due to the decrease in temperature, it was found that the job execution time was reduced by 15~23%. In the future, it is expected that using this performance evaluation environment established through this study will enable us to easily conduct test evaluations for various processors, cooling methods, and changes in operating conditions.
        4,200원
        92.
        2022.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        지구온난화 완화를 위한 노력이 전 세계적으로 계속되고 있는 가운데 우리나라는 2030년 온실가스 배출량을 Business As Usual (BAU) 대비 37% 감축하는 목표를 설정하고 이산화탄소 순 배출 제로 달성을 목표로 하는 ‘2050탄소중립 시나리오’를 발표하였다. 이러한 상황에서 케나프 (Kenaf)는 높은 탄소흡수율과 빠른 성장으로 인해 대체 해결방안으로 제안된다. 시료선정에 대한 분석결과, 케나프 잎은 질소 함량이 높아 적합하지 않은 것으로 나타났고, 줄기와 잎-줄기 혼합 케나프는 Biomass-Solid Refuse Fuel (Bio-SRF) 등급을 충족했다. Bio-SRF 등급을 만족하였지만, Bio-SRF 등급으로 이용할 수 있는 활용처가 뚜렷하지 않다. 따라서 케나프의 연료품질을 반탄화 공정을 통해 개선하여 보다 효율적으로 활용하고자 한다. 반탄화 공정의 공시재료로 줄기만 사용하는 것보다 시료 이용률이 높은 잎-줄기 혼합 케나프를 선택하였다. 반탄화 공정은 여섯가지의 공정 온도 (200·210·220·230·240·250℃)와 다른 세 가지 공정 시간(20·30·40 min)에서 수행되었다. 반탄화 공정결과, 공정시간이 길수록 230℃, 240℃, 250℃ 온도에서 질량감소가 크기 때문에 에너지수율이 낮았다. 따라서 본 연구에서는 200℃·20 min, 200℃·30 min, 210℃·20 min, 220℃·20 min의 에너지 수율이 높고 질량감소가 작아 최적 반탄화 공정 조건으로 선정하였다.
        4,000원
        93.
        2022.06 구독 인증기관 무료, 개인회원 유료
        저서동물은 저서환경특성을 나타내는 중요한 지시자로 알려져 있다. 본 연구에서는 무안만 조 하대의 환경 및 저서동물의 분포특성을 조사하였으며, 수질평가지수(WQI)와 저서생물지수 (AMBI)를 이용하여 저서생태계 건강성을 평가하였다. 현장채집은 2019년 하계 무안만 조하대 의 10개 정점에서 이루어졌다. 무안만 조하대는 상부지역이 하부지역에 비해 세립한 입도특성 을 나타내고 있었으며, 높은 유기물 함량을 보였다. 일부 정점에서 오염지표종인 Musculista senhousia, Theora fragilis and Lumbrineris longifolia과 같은 종들도 우점을 나타내고 있었다. 군집분석결과 무안만 조하대는 상부, 중부, 하부 그룹으로 구분되었으며, 유기물 함량과 저서 건강성 평가지수(WQI 및 AMBI)와의 상관결과와 일치하였다. 본 연구결과, 무안만 조하대의 저서생태계는 양호한 것으로 평가되었다. 하지만 저서동물이 균등하게 분포하지 않고, 기회 종이 출현하고 있어 조하대의 유기물 부하량이 증가하고 있는 것으로 보인다.
        4,000원
        94.
        2022.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study evaluated the nutritional composition and quality traits of rabbit meat as compared to chicken meat. Samples of loin (M. longissimus dorsi) and breast meats were collected from rabbit and chicken carcasses, respectively. The meats were then analyzed for the proximate composition, collagen and energy contents, fatty acid composition, myoglobin and heme iron contents, pH value, water-holding capacity (WHC), cooking loss, meat color, Warner-Bratzler shear force (WBSF) value, and texture profile. Compared to chicken breast meat, lower (p<0.05) protein content and higher (p<0.05) ash and collagen contents were obtained in rabbit loin meat. Rabbit meat remarkably had higher (p<0.05) total polyunsaturated fatty acids (PUFA) and linolenic acid contents and lower (p<0.05) n-6/n-3 PUFA ratio as compared to chicken meat. The pH value and WHC were lower (p<0.05) in rabbit meat than in chicken meat (p<0.05). Rabbit meat exhibited lower (p<0.05) L* value and higher (p<0.05) a* and b* values compared to chicken meat (p<0.05). The WBSF value, hardness, and gumminess were higher (p<0.05) in rabbit meat than in chicken meat (p<0.05). These findings suggest that rabbit meat has higher essential n-3 PUFA, darker color, and firmer texture as compared to chicken meat.
        4,000원
        1 2 3 4 5