Existing reinforced concrete building structures have seismic vulnerabilities due to their seismically-deficient details resulting in non-ductile behavior. The seismic vulnerabilities can be mitigated by retrofitting the buildings using a fiber-reinforced polymer column jacketing system, which can provide additional confining pressures to existing columns to improve their lateral resisting capacities. This study presents dynamic responses of a full-scale non-ductile reinforced concrete frame retrofitted using a fiber-reinforced polymer column jacketing system. A series of forced-vibration testing was performed to measure the dynamic responses (e.g. natural frequencies, story drifts and column/beam rotations). Additionally, the dynamic responses of the retrofitted frame were compared to those of the non-retrofitted frame to investigate effectiveness of the retrofit system. The experimental results demonstrate that the retrofit system installed on the first story columns contributed to reducing story drifts and column rotations. Additionally, the retrofit scheme helped mitigate damage concentration on the first story columns as compared to the non-retrofitted frame.

This paper presents experimental results for evaluating bond strength of FRP Hybrid Bars(HYB). In order to confirm the bond strength of HYB, direct bond strength tests were performed on 20 specimens. 20 specimens made of deformed steel bars were also tested for relative comparison. HYB and deformed steel bars were embedded in a concrete block with a size of 200 mm and different attachment lengths were applied depending on the diameter of the reinforcing bars. During the test, load and relative displacement(slip) were measured and the load-displacement behaviors of all specimens were analyzed from the measured results. The maximum bond strength of deformed steel bars were higher than that of HYB regardless of its diameter. However, after the maximum load, the deformed steel bars were more dominant than the HYB in the sudden load reduction tendency.

FRP is a new material that has light, high strength and high durability characteristics and is emerging as a third construction material in and out of countries. However, very few studies have been done on curved FRP construction materials that can be used for tunnels or arched bridges. In particular, many joints are required for the application of curved panels to the open cut tunnel. Experimental data on the performance of the joint is required due to insufficient design criteria. The purpose of this study is to analyze the structural performance of real size, composite materials curved panels. To achieve this goal, curved panels were constructed and bending performance was tested. A numerical analysis was also performed and compared with the results of the test. The results of the test showed that the average load was 757.6 kN and the average displacement of bottom was measured at 53.12 mm. Compression stress on the upper flange and tensile stress on the lower flange were within acceptable limits of 50% of the allowable stress.

In this study, the long-term performance of FRP Hybrid Bar made by hybridizing FRP (Fiber Reinforced Polymer) with ordinary reinforcing steel bars was experimentally examined as a part of the development of alternative materials for RC (reinforced concrete) structures especially located in marine or harbor areas. In order to evaluate the field exposure of the FRP Hybrid Bar, the specimen was prepared and the corrosion behavior was evaluated by letting the specimen exposed to the field conditions in the west coast of South Korea. The purpose of this study is to provide important data as a material countermeasure to reduce corrosion of reinforcing steel in future marine port concrete structures based on the results obtained through this study.

The paper presents an experimental study on shear behavior of RC beams retrofitted with Uni-Directional Narrow Fabric to improve seismic performance. Experimental parameters include the type of fiber, spacing of the fiber, and the ratio of transverse reinforcement. Also, Static loading test was performed on twelve shear-critical specimens. An experimental result were analyzed to investigate the contribution of shear strength and failure modes of the specimens retrofitted or strengthened with Uni-Directional Narrow Fabric compared to the non-retrofitted the specimen. In order to derive the shear strength model according to the spacing of the fiber, the experimental results were compared with the conventional shear strength model of RC elements retrofitted with FRP.

전통적인 FRP 선체 제작에는 mould가 요구되며, mould의 높은 제작비용은 FRP 선박 제작자에게 비용부담을 주고 있다. 이를 극복하기 위한 방안으로 강선 건조에서 사용되는 블록 혹은 모듈 방식의 제작기법에 착안한 modular construction 방안이 제시되었다. 이 제작방안을 FRP 선체에 효율적으로 적용하기 위해서는 설계 및 제작 측면에서 간략하면서도 구조적 안정성을 갖는 접합 이음부 개발이 이루어져야 한다. 따라서, 본 논문에서는 모듈방식의 FRP 선체 제작을 위해 moulding-in 개념을 기반으로 한 경제적인 접합 이음부 개발에 관한 연구를 수행하였다. FRP 샌드위치 판을 대상으로 step, scarf-step 그리고 scarf 이음부 형상을 갖는 moulded-in을 수지주입식진공성형 공정에 도입하여 성공적으로 접합된 FRP 샌드위치판 을 제작하였다. 이에 대해 구조적 안정성 평가를 목적으로 인장 및 4점 굽힘 시험 그리고 유한요소해석을 수행하였다. 시험과 해석결과에 대한 비교 연구를 통해 본 연구에서 개발된 접합 이음 내용이 모듈방식의 FRP 선체 제작에 적용 가능함을 확인할 수 있었다.

This paper presents experimental and analytical results for predicting tensile behavior of FRP Hybrid Bar(HYB). In order to confirm the tensile behavior of HYB wrapped with glass fiber reinforced polymer(GFRP) on deformed rebar, direct tensile tests were performed on 8 specimens. The diameter of the HYB was considered as a test variable and the tensile load, displacement, and tensile strain of each specimen were measured by tensile test. In order to predict the tensile behavior of HYB, numerical analysis based on tensile model of each material was performed. The tensile models of reinforcing bar, glass fiber, and resin, which are the constituent materials of HYB, are assumed to be simple shapes according to their material properties. The results of the numerical analysis through the strain compliance condition of each material were compared with the experimental results and both results showed consistent trends. The experimental and analytical ratios for yield and ultimate loads were 1.02 and 1.00, respectively, and the coefficient of variation were 3.61 and 2.54, respectively. However, a maximum of about 9 mm error occurred due to the slip generated by the direct tensile test in the comparison between the experimental results and the analytical results for the tensile displacement.

ber reinforced polymer (FRP) reinforcing bars for concrete structure have been extensively investigated and a number of FRP bars are commercially available. However, major shortcoming of the existing FRP bars is low elastic modulus compared to conventional steel bars. Because of these reasons, FRP Hybrid Bar which have the concept of material hybridization(synthetic resins, deformed bar, glass fiber etc) for concrete structures have been developed. One of main features of this bar is corrosion resistance and this is important to confirm this anti-corrosion capacity of FRP Hybrid Bar. In this study, galvanic corrosion current behavior of 3 types of specimens, including two types of FRP Hybrid Bars and one conventional steel rebar, was investigated under the 0%, 1.5%, 3% and 6% salt water ratio condition. The result of this study can be used to evaluate the applicability of FRP Hybrid Bar to concrete structures.

Numerical behavior of FRP(Fiber Reinforced Polymer) panel in steel frame structure was evaluated through the finite element analysis in this study. In order to numerical analysis, a experimental test results was used to develop a three dimensional finite element model of steel frame specimen. Numerical results of the steel frame specimen was well predicted the experimental behavior of steel frame specimen. Based on the developed three dimensional finite element model of steel frame specimen, the behavior of FRP panel in the steel frame specimen was evaluated. From the numerical analysis results, strength of the steel frame specimen with FRP panel was governed by FRP panel. Also, diagonal compression behavior governed the FRP panel in the steel frame specimen in the numerical analysis results.

GFRP(Glass Fiber Reinforced Polymer Plastic) has a superior corrosion resistance, high specific strength/stiffness, etc. Therefore, such properties can be used to mitigate the problems associated with the use of conventional construction materials. In this study, the various rib and pitch distance of hybrid fiber GFRP bars were evaluated by experimental method. From the test result, thirty two types of FRP hybrid bars such as spiral type with the dimension of rib geometry were fabricated. To evaluate the bond properties of them, direct pull-out test was performed. All testing procedures including specimen preparation, set-up of test equipment and measuring devices were made in accordance with the recommendations of ASTM D 7913. From the test results, it was found that cross type hybrid GFRP reinforcing bars showed the highest bond strength than that of the others due to the higher relative rib area.

During the last two decades, fiber reinforced polymer (FRP) reinforcing bars for concrete structure have been extensively investigated and a number of FRP bars are commercially available. However, major shortcomings of the existing FRP bars are its high initial cost and low elastic modulus compared to conventional steel bars. Because of these reasons, Korea Institute of Civil Engineering and Building Technology (KICT) in Korea has developed the FRP Hybrid Bar which have the concept of material hybridization for concrete structures, especially for marine and waterfront concrete structures. This developed bar is new type material in construction field, verification of long term performance is very important for commercialization. In this paper, verification methodology on long term performance(corrosion, flexural behavior etc) of FRP Hybrid Bar is suggested.

To overcome shortcomings of fiber reinforced polymer (FRP), a hybridized FRP rebar was developed by the authors. This hybrid bar herein called “FRP Hybrid Bar” was fabricated by adopting advantages from two different materials, including glass fiber reinforced polymer (GFRP). Corrosion resistant characteristics of FRP Hybrid Bar were evaluated and the test results were explained in this paper. The use of the alternative reinforcement could allow concrete structures to extend life-span, to save maintenance and repair costs, etc. if the FRP Hybrid Bar was applied to RC structures located in a very corrosive environment, such as marina or harbor areas.

Floating PV generation system, renewable energy power plant, is able to overcome the disadvantages of ground PV generation system and improve generating efficiency. The frame structural system is an established technology among a diversity of structural technologies which has been developed for related fields. In this paper, the both structural safety and characteristics of floating PV generation structures depend on the different placement angle of solar module are investigated to improve the commercial viability, the structural safety, and characteristics of floating PV generation structures. In addition, for the estimation of structural safety, FE analyses are conducted. From the results, the lower placement angle of solar module improves the structural safety of floating PV generation system.

A behavior of FRP(Fiber Reinforced Polymer) panel in a steel frame structure was evaluated through the finite element analysis in this study. In order to numerical analysis, a experimental test results was used to develop a three dimensional finite element model of steel frame specimen. Numerical results of the steel frame specimen was well predicted the experimental behavior of steel frame specimen. Based on the developed three dimensional finite element model of steel frame specimen, the behavior of FRP panel in the steel frame specimen was evaluated. From the numerical analysis results, strength of the steel frame specimen with FRP panel was governed by FRP panel. Also, diagonal compression behavior governed the FRP panel in the steel frame specimen in the numerical analysis results.

GFRP(Glass Fiber Reinforced Polymer Plastic) has a superior corrosion resistance, high specific strength/stiffness, etc. Therefore, such properties can be used to mitigate the problems associated with the use of conventional construction materials. In this study, the various rib and pitch distance of hybrid fiber GFRP bars were evaluated by experimental method. From the test result, thirty two types of FRP hybrid bars such as spiral and cross type with the dimension of rib geometry were fabricated. To evaluate the bond properties of them, direct pull-out test was performed. All testing procedures including specimen preparation, set-up of test equipment and measuring devices were made in accordance with the recommendations of ASTM D 7913. From the test results, it was found that cross type hybrid GFRP reinforcing bars showed the highest bond strength than that of the others due to the higher relative rib area.

FRP composites bridge deck has advantages of structural characteristics and rapid construction in the replacements of the deteriorated bridge deck. Although FRP composites have many advantages, the application in the bridge design has been retarded so far due to the lack of design guidelines. In this paper, the design example for the FRP decked concrete composite girder bridges is presented to verify the proposed design method. The design of connection in the design example is the flexible hybrid shear connection included steel reinforcements and FRP tubes. Finally, this paper may be design guideline for FRP decked concrete composite girder bridges required the composite action.

Recently, the fiber reinforced polymers (FRP) materials have been recognized as advanced materials for bridge construction. The FRP bridge deck system has advantages to construct rapidly, its durability. The FRP bridge decks have accepted as a method of deteriorated reinforced concrete bridge deck replacement. For application, design method details and connections for FRP bridge decks will be provided. In this paper, the design method, deck design and connections details on FRP decked precast, prestressed concrete girder bridges is presented. In this study, the design method of efficient connection between FRP deck and concrete girder is proposed with composite action. The schematic of proposed modular FRP panel deck-to-concrete girder connection is also presented, which is the flexible hybrid shear connection included steel reinforcements and FRP tubes. The FRP deck-to-concrete girder hybrid connection system should be improved with further refinement and experimental program. Finally, it is hoped that this paper will be guideline for research and development on this subject field for researchers and engineers