Heat transfer performance improvement by fin and groovs is studied for condensation of R-11 on integral-fin tubes. Eight tubes with trapczodially shaped integral-fins having fin density from 748 to 1654fpm(fin per meter) and 10, 30 grooves are tested. A plain tube having the same diameter as the finned tubes is also used for comparison. R-11 condensates at saturation state of 32 ℃ on the outside tube surface coded by inside water flow. All of test data are taken at steady state. The heat transfer loop is used for testing singe long tubes and cooling is pumped from a storage tank through filters and folwmeters to the horizontal test section where it is heated by steam condensing on the outside of the tubes. The pressure drop across the test section is measured by menas pressure gauge and manometer. The results obtained in this study is as follows : 1. Based on inside diameter and nominal inside area, overall heat transfer coefficients of finned tube are enhanced up to 1.6 ~ 3.7 times that of a plain tube at a constant Reynolds number. 2. Friction factors are up to 1.6 ~ 2.1 times those of plain tubes. 3. The constant pumping power ratio for the low integral-fin tubes increase directly with the effective area to the nominal area ratio, and with the effective area diameter ratio. 4. A tube having a fin density of 1299fpm and 30 grooves has the best heat transfer performance.

The objective of this study is to provide with the hydro-meteological and probabilistic characteristics of the storms of typhoons that have been passed through the Korean peninsula during the last twenty-three years since 1961. The paths and intensities of the typhoons were analyzed. Fifty weather stations were selected and the rainfall data during typhoon periods were collected. Rainfall data were analyzed for the patterns and probabilistic distributions. The results were presented to describe the areal distributions of probabilistic characteristics. The results obtained from this study can be summarized as follows: 1. The most frequent typhoon path that has passed through the Korean peninsula was type E, followed by types CWE, W, WE, and S. The most frequent typhoon intensity was type B, followed by A, super A, and e types, respectively. 2. The third quartile typhoon rainfall patterns appear most frequently followed by the second, first, and last quartiles, respectively, in Seoul, Pusan, Taegu, Kwangju and Taejon. The single typhoon rainfalls with long rainfall durations tended to show delayed type rainfall patterns predominantly compared to the single rainfalls with short rainfall durations. 3. The most frequent probabilistic distribution of typhoon rainfall event is Pearson type-III, followed by Two-parameter lognormal distribution, and Type-I extremal distribution. 4. The most frequent probability distribution model of seashore location was Pearson type-III distribution. The most frequent probability distribution model of inland location was two parameter lognormal distribution.

It is the problem point of stability for this study to produce cosmetics and to occur in the circulation process, and specially in a case of alcoholic toilet water the precipitation materials to float on content materials has study on the solubility of perfume, and it has practiced in order to examine the problem point whether the raw materials of plastic vessel is or not harmful in content materials. In testing result, A study on stability of alcoholic toilet water is above all the precipitation materials which floats in content materials, and It is appeared by combination ratio to the raw materials of perfume, ethanol, solubilizer and refining water etcs, and in second the alkali degree which has gushed out of glass vessel can understand the thing that the change of PH is largely increased following to the passage of time, and in third the harmful component of content materials out of raw material in plastics vessel must certainly consider a stability and a safety in quality control of products.

The heat transfer performance of R - 11 vapor condensing on integral fin tubes has been studied using fin tubes having the fin density from 748 to 1654 fins per meter. Electric heater supplied heat energy to the boiler to generate R - 11 vapor over the range of 25-60W. Condensation rates of each tubes were tested under the condition of cooling water flow rate from 400l/h to 2500l/h. For the seven fin tubes tested, the best performance has been obtained with a tube having a fin density of 1417fpm and a fin height of 1.3mm. This tube has yielded a maximum value of the heat transfer coefficient of 16500W/m2K, at a vapor to wall temperature difference of 3K. Experimental results of integral fin tubes have been compared with available predictive models such as Beatty - Katz's analysis, Webb's analysis, Sukhatme's analysis and Rudy's empirical relation. The experimental results were shown to be in good agreement with that of the Sukhatme's analysis.

According to historical records, Woon-Ju-Sa temple in Hwa-Soon, Chollanamdo, have had one thousand stone buddhas and one thousand stone pagodas, located south-west hill side of Woon-Ju-Sa is the Seven-Star-Stone(SSS). It consist of seven circular rocks with varying sizes that form a pattern similar to the constellation Ursa Major. SSS(Seven Star Stone) is an important astronomical remain because it might be one of the oldest records showing stellar brightness in Korea. We have compared the sizes of 888s with the magnitudes of stars of Ursa Major. It is found that the sizes of SSSs do roughly represent the magnitudes of Ursa Major stars in a way consistent with the magnitude scale used in Chun-Sang-Yul-Cha-Bun-Ya-Ji-Do(天象列次分野之圖) of Chosun.

This study examines the Symbolic notions of Haein Buddhist Monastery based on the context of Feng-shui. Through the study, it is verified that the geographical features surrounding the Haein Buddhist Monastery are imbued with the basic layout of the monastery and the constitutional elements of the Haein Buddhist Monastery are structured and formed with the architecture and landscape of the monastery. Thus, the study maintains that the siting and the arrangement of the Haein Buddhist Monastery reflect the context of Feng-shui.

The occurrence of objectionable tastes and odors in drinking water is a common and widespread problem. The most troublesome odors are usually those described as muddy or earthy-musty. Two organic compounds which have been implicated as the cause of earthy-musty odor problems in water are geosmin and 2-Methylisoborneol. These earthy-musty organics have been shown to be metabolites of actinomycetes and blue green algae. The purpose of this paper is to describe adsorbability in removing these two oder causing compounds(geosmin and 2-MIB) upon various conditions like pH variation, adding humic acid and different activated carbon. The conclusion of this study are as followings. In batch test, carbon dosage is 10mg/100ml for geosmin and 15mg/100ml for 2-MIB. Both were in equilibrium state after 60 hours. In model simulation, F-P model described experiment data and modelling data appropriately in geosmin but F-S model not. In case of 2-MIB, models didn't describe relation between experiment and modelling data well. Two causative agents of earthy-musty odor compounds, geosmin and 2-MIB, are strongly adsorbed by activated carbon either coconut or brown. There appears to be no effect of pH (3,7,9) on adsorption of these two organics. Activated carbon proved to be more effective for removing geosmin than for removing 2-MIB. When activated carbon is. used in removing these two organics, the removal of these appeared to be adversely affected by back ground organic compounds, such as humic substances, due to competitive adsorption.

It is well known that the adsorption character of activated carbon is dependent on the specific surface area and pore volume, but the relationship between the surface-chemical structure and the adsorption character has not been studied very often. The purpose of this study is to investigate the effect of the acidic surface functional groups of activated carbon and the adsorption characteristics of low concentration phenol. So three types of activated carbons and four different treatments were introduced to this isotherm experiment. These treatments were nontreatment, 1N $HNO_3$ treatment, 6N $HNO_3$ treatment, $H_2O_2$ treatment. The conclusions of this study are as followings. If the initial concentration of phenol is high as 5mg/l, the adsorption is dependent on the specific surface area. If the initial concentration of phenol is low as $100{\mu}g/l$, the adsorption is dependent on the average pore volume. The acidic surface functional groups prevent the adsorption of phenol molecules to activated carbon. And the adsorbed amount decreases more for $HNO_3$ treatment than for $H_2O_2$ treatment and more for concentrated $HNO_3$ treatment than for dilute $HNO_3$ treatment.

The study of lake pollution problems is often related to the dynamic behavior of phosphorus. Several phosphorus models are available that may be suitable to study these problems. Depending on the the management objectives and data availability, some models may be more appropriate than others. Criteria are defined to help modelers choose the most appropriate total phosphorus models for different lakes. These criteria consider in-lake processes such as sediment feedback, stratification, and algal uptake and recycle.

경북지방(慶北地方)사과원(園)의 사과나무 개식장해(改植障害) 발생여부(發生(與否)와 발생정도(發生程度)를 밝힐 목적(目的)으로 20년이상(年以上) 사과재배(栽培)가 계속되고 있는 23개(個) 사과원(園)의 토양(土壤)을 채취(採取)하여, 토양소독(土壤消毒)에 의(依)한 사과실생묘(實生苗)의 생장(生長)과 개식장해(改植障害)에 관련(關聯)된 것으로 알려진 몇 가지 요인(要因)을 조사(調査)한 결과(結果)는 다음과 같았다. 1. 사과실생묘(實生苗)의 생장(生長)은 6개(個) 과원(果園)에서 유의차(有意差)가 있었고, 가장 큰 차이(差異)를 나타낸 과원(果園)에서 38% 증가(增加)되었다. 2. 생체중(生體重)에서는 지하부(地下部)가 4개원(個園), 지하부(地下部)가 10개원(個園) 전생체중(全生體重)에서는 9개원(個園)에서 유의차(有意差)를 나타내었고, 지상부(地上部)에서 토양소독(土壤消毒)에 의(依)한 차이(差異)가 가장 현저(顯著)하였으며, 5개과원(個果園)에서는 50%이상(以上) 증가(增加)되었다. 3. 토양중(土壤中)의 Cu 및 As 농도(濃度), 토양선충수(土壤線蟲數)는 사과실생묘(實生苗)의 생장(生長)과 생체중(生體重)에 뚜렷한 영향(影響)을 미치지 않았다. 4. 토양(土壤) PH와 개식장해발생간(改植障害發生間)에는 뚜렷한 관계(關係)를 확인(認定)할 수 없었다.

An experimental study was conducted to investigate the effects of chlorine dioxide and ozone on reduction of THM(trihalomethane) formation. Precursor concentration, chlorine concentration, reaction time, pH, and temperature were governing compornents of THM formation. When other conditions are constant, THM formation increased linearly with precursor concentration increased. THM formation increased when pH increased from 5 to 9. In combined treatment with chlorine and chlorine dioxide, chlorine treatment after chlorine dioxide treatment made less THM than any other case does. Ozonation reduced THMFP(THM formation potential) of THM precursor. THMFP decreased exponentially with reaction time increased. Also biodegradability of humic acid was enhanced by ozonation.

일반적으로 복합재료 적층원통관의 강도와 강성은 세장모수, coupling 강성모수, 섬유배향각, 적층방법, 그리고 적층수 등의 변동성에 매우 민감하게 변화한다. 본 논문에서는 복합재료 적층원통관의 합리적인 신뢰성해석을 수행할 수 있는 강도 및 좌굴한계상태함수를 제안하고, 전술한 인자들이 GFRP(Glass Fiber Reinforced Plastic) 적층원통관의 강도 및 좌굴신뢰성에 미치는 영향을 고찰하였다. 이들은 복합재료 적층원통관의 강도 및 좌굴신뢰성에 매우 다양하고 복합적인 영향을 미치기 때문에 최적설계기법이나 설계규준의 개발등을 통하여 설계관련 인자들을 설계에 합리적으로 반영하므로서 실무에서 균형설계(Balanced Design)를 위한 일관성 있는 안전도/신뢰도의 확보가 가능하다고 사료된다.

여러 크기의 이중실관 생물 반응기에서의 Aspergillus niger(KCTC 1232)를 이용한 구연산 생산 실험을 수행하였다. 초종 세포농도는 세포 성장구간 기준으로 300g/l에 달하였다. 공기와 산소의 공급 조건하에서의 단위 용적당의 생산성은 각각 0.63, 0.02g/l.h였고 이는 회분식 발효에 대해 10, 16배 증가한 결과이다. 공급배지의 초기 pH는 구연산의 생산에 중요한 요소이며 pH가 낮을수록 높은 구연산 생산수율을 얻을 수 있었다. Scale-up의 가능성을 알아보기 위해 반응기 unit와 배지의 공급속도를 변화시킨 결과 반응기 unit와 배지 공급속도의 증가는 기질의 높은 소비속도로 인해 생산성의 증가를 가져왔다.