This paper presents the interrelationship between software quality character and engineering attributes. The software quality characteristics and subcharacteristics are excerpted from IS0/IEC 9126 standards, and the engineering attributes are from Deutsch and Willis〔4〕. Based on the previous studies a subjective judgement, trisected interrelationship(strong, medium, weak) bet these two groups are derived. The results are summarized in a table, and can be used as a quick reference guide to the software quality engineering application such as quality evaluations for software products, selection of key engineering attributes for high-quality software production, and so forth.

In this paper, the QFD(quality function deployment) technique is used to acquire the quality requirements of package software which is sold in a commercial software shop. To select the principal quality characteristics of package software, an user survey was conducted for a quality model developed based on the international standards and the previous research. The software user is divided into three groups：the general user, the expert, and the developer. The method of QFD is applied to choose the software quality attributes which have strong correlation with the selected quality characteristics.

Burn-in is a test procedure to find and eliminate the inherent initial failure of a product during or at the final stage of production process. Software testing is the validation and verification process which is used to cut off the faults from a software. The two have the common function and objective of "debugging". This article summarizes some significant models on the optimal hardware and software burn-in time, and provides the relevant paper lists. The need for the development of the unified burn-in policy of a hardware-software system is addressed.addressed.

본 연구는 8단계 소프트웨어 프로세스 모델을 제시하고 그 중 중요한 역할을 수행하는 SCM 프로세스를 소개한다. 끝으로 소프트웨어 프로세스개선 모델인 CMM, SPICE, IS0/IEC 12207, ISO 9000-3을 소개한다.

The existent system of management for Measurement of Safety Cost are not effective because of the data loss and time loss and occurrence of errors through manual calculation. Therefore, tile development of the software for measurement of safety cost can solve the problem through the systematic calculation for safety cost and converting the related data to database, and also can build the strategy of the investment of Safety cost through analysing and comparing with the past data in the database. As a part of development of the software of Measurement of Safety Cost which is appropriate for the domestic environment, this study is developing a software based on Noguji method, which is one of the methods of Measurement of Safety Cost, and to appraise the efficiency of the management of Measurement of Safety Cost we will implement and improve the software in the case of the domestic enterprises.

The existent system of management for Measurement of Safety Cost are not effective because of the data loss and time loss and occurrence of errors through manual calculation. Therefore, the development of the software for measurement of safety cost can solve the problem through the systematic calculation for safety cost and converting the related data to database, and also can build the strategy of the investment of Safety cost through analysing and comparing with the past data in the database. As a part of development of the software of Measurement of Safety Cost which is appropriate for the domestic environment, this study is developing a software based on Noguji method, which is one of the methods of Measurement of Safety Cost, and to appraise the efficiency of the management of Measurement of Safety Cost we will implement and improve the software in the case of the domestic enterprises.

The development of universal CCD camera control software for all BOAO CCD camera systems is proposed. The new software, running under Sun SPARCstation and motif based X window system with SunOS 4.1.3 operating system, replaces existing control software based on NeXTstation color and NeXTstep 2.1 operating system which is no more produced now. Several new features of the new software is introduced, some of which are 1) the image contrast is enhanced by color manipulation and display, 2) image zooming and trimming, 3) any size of image can be displayed in the scrolled window, and 4) the offset between telescope pointing position and CCD center is easily calculated by alt-azi map. Along with the above new features, the new software has advantages including ease of maintenance and upgrading and elimination of risk caused by hardware damage. Since September 1, the software beta version is being used by observers and there is not seen severe problem regarding the software itself, but several requests to equip more features to the software will be mirrored to future release.

본 연구에서는 Boland C언어를 사용하여 최적설계 수행에 필요한 작업을 쉽게 수행할 수 있는 전처리기와 후처리기를 개발하였다. 전처리기는 선택된 최적설계 알고리즘에 필요한 입력 데이터나 서브루틴 작성을 도와준다. 후처리기에서는 반복 계산중에 생성된 수치값을 그래프로 도시해 줌으로써 문제에 대한 전반적인 파악이 가능하도록 하였다. 수치예제는 선형문제와 삼부재 구조물에 대해서 제시하였다.

We have investigated intensively an optical telescope with 76cm diameter and CCD camera system in astronomical observatory of Kyung Hee university, in order to maximize instrumental functions of our observational equipments and to construct a more reliable photometric system. And computer softwares AUTO DOME, KH CCD and KH PHO for astronomical image observations and their automatic photometries with high accuracy have been made for observers w use our observational system conveniently and efficiently. Throughout careful examinations of these programs, it has been proved that the observing time by our program is shorter than that by manual operations, so that, fast and accurate observations can be executed with ease. For open cluster NGC 7063 observed with S/N value of 350 or more by KH PHO, we have found the magnitude measurements of 11 object stars would show 0.007 magnitude difference, comparing with magnitude data from IRAF/APPHOT. From automatic photometry of eclipsing binary, AB And observed by our software, total 220 data points with good quality have been acquired during 8 hours and so we could make a better light curve than that obtained from any observational results by domestic photoelectric photometry system.

The hardware and the software of the prototype telemtry system to monitor the behavior of the fish are designed. This system consistes of five parts I. e. three omni-directional hydrophones, three ultrasonic receivers, a single board computer for the signal processing, two RF transceivers for the data communication, and a personnel computer. The sensitivty of the hydrophones is -170dB(re 1V/μPa), the gain and the 3dB receiving bandwidth of the ultrasonic receivers are 115dB and 1500Hz respectively, and the sampling period is 33.3μsec in the signal processing part. The positioning error of the system using hyperbolic method is estimated to be less than 0.2m in case that the pinger locates inside of the baselines. The perfomance of the system considering a practical use was examined by numerical simulation and a water tank test of a pinger tracking experiment. In results, the system developed in prototype was confirmed that it could be useful for monitoring the behavior of fish in the limited water area.