Many studies for personal mobility are increasing at the latest. One part of personal mobility study is electric scooter. Driving elements of electric scooter are battery and motor, patterns of vehicle being proposed multiply by manufacturer. The old and the infirm's population in domestic and abroad increases day by day. Thus, the personal vehicle for them that can be managed easily is needed for them. Following the trend “personal mobility”, this study propose electric-drive scooter which is portable and compact. Prototypes of proposed models are manufactured to commercialize it. As results, adopt of foldable type at electric scooter can be decreased size. Also 4-wheel scooter is more stable than 3-wheel sooter.

To obtain in vivo matured oocytes for dog cloning, serum progesterone (P4) level were employed for ovulate determination. Radioactive immunoassay (RIA) is a traditional serum hormone assay method with highly radioactivity. The aim of this study was to evaluate the reliability of RIA and to compare its canine serum P4 concentration determination accuracy to that of the electric chemiluminescence immunoassay (ECLI). To obtain in vivo matured oocytes for canine somatic cell nuclear transfer, serum P4 levels were accurately measured with both methods of RIA and ECLI. Although both methods detected similar P4 level before ovulation, the mean P4 concentration using ECLI was significantly higher than that using RIA from 3days before ovulation. Following ovulation, oocytes were collected by surgery, and a lower percentage of mature oocytes were observed using ECLI (39%) as compared to RIA (67%) if 4-8ng/ml of P4 were criteria for determination of ovulation. On other hand, high percentage of mature oocytes was observed using ECLI when 6–15 ng/mL of progesterone was criteria for ovulation determination. To determine whether in vivo oocytes obtained by ECLI method could be used for canine cloning, six canines were selected as oocyte donors and two puppies were produced after SCNT and embryo transfer. In conclusion, compared to the traditional RIA method, the ECLI method is a safe and reliable method for canine cloning.

Activated carbons (ACs) have been used as electrode materials of electric double-layer capacitors (EDLC) due to their high specific surface areas (SSA), stability, and ecological advantages. In order to make high-energy-density ACs for EDLC, petroleum pitch (PP) precarbonized at 500–1000°C in N2 gas for 1 h was used as the electrode material of the EDLC after KOH activation. As the pre-carbonization temperature increased, the SSA, pore volume and gravimetric capacitance tended to decrease, but the crystallinity and electrode density tended to increase, showing a maximum volumetric capacitance at a medium carbonization temperature. Therefore, it was possible to control the crystalline structure, SSA, and pore structure of AC by changing the pre-carbonization temperature. Because the electrode density increased with increasing of the pre-carbonization temperature, the highest volumetric capacitance of 28.4 F/cc was obtained from the PP pre-carbonized at 700°C, exhibiting a value over 150% of that of a commercial AC (MSP-20) for EDLC. Electrochemical activation was observed from the electrodes of PP as they were pre-carbonized at high temperatures above 700°C and then activated by KOH. This process was found to have a significant effect on the specific capacitance and it was demonstrated that the higher charging voltage of EDLC was, the greater the electrochemical activation effect was.

Ocean economy plays a crucial role in the strengthening maritime safety industry and in the welfare of human beings. Electric Submersible Pumps (ESP) have been widely used in floating platforms on the sea to provide oil for machines. However, the ESP fault may lead to ocean environment pollution, on the other hand, a timely fault diagnosis of ESP can improve the ocean economy. In order to meet the strict regulations of the ocean economy and environmental protection, the fault diagnosis of ESP system has become more and more popular in many countries. The vibration mechanical models of typical faults have been able to successfully diagnose the faults of ESP. And different types of sensors are used to monitor the vibration signal for the signal analysis and fault diagnosis in the ESP system. Meanwhile, physical sensors would increase the fault diagnosis challenge. Nowadays, the method of neural network for the fault diagnosis of ESP has been applied widely, which can diagnose the fault of an electric pump accurately based on the large database. To reduce the number of sensors and to avoid the large database, in this paper, algorithms are designed based on feature extraction to diagnose the fault of the ESP system. Simulation results show that the algorithms can achieve the prospective objectives superbly.

Daecheong Reservoir was made by the construction of a large dam (>15 m in height) on the middle to downstream of the Geum River and the discharge systems have the watergate-spillway (WS), a hydropower penstock (HPP), and two intake towers. The purpose of this study was to investigate the limnological anomalies of turbid water reduction, green algae phenomenon, and oligotrophic state in the lower part of reservoir dam site, and compared with hydro-meteorological factors. Field surveys were conducted in two stations of near dam and the outlet of HPP with one week intervals from January to December 2000. Rainfall was closely related to the fluctuations of inflow, outflow and water level. The rainfall pattern was depended on the storm of monsoon and typhoon, and the increase of discharge and turbidity responded more strongly to the intensity than the frequency. Water temperature and DO fluctuations within the reservoir water layer were influenced by meteorological and hydrological events, and these were mainly caused by water level fluctuation based on temperature stratification, density current and discharge types. The discharges of WS and HPP induced to the flow of water bodies and the outflows of turbid water and nutrients such as nitrogen and phosphorus, respectively. Especially, when hypoxic or low-oxygen condition was present in the bottom water, the discharge through HPP has contributed significantly to the outflow of phosphorus released from the sediment into the downstream of dam. In addition, HPP effluent which be continuously operated throughout the year, was the main factor that could change to a low trophic level in the downreservoir (lacustrine zone). And water-bloom (green-tide) occurring in the lower part of reservoir was the result that the water body of upreservoir being transported and diffused toward the downreseroir, when discharging through the WS. Finally, the hydropower effluent was included the importance and dynamics that could have a temporal and spatial impacts on the physical, chemical and biological factors of the reservoir ecosystem.

본 연구는 융복합기술을 사용하여 국내 자동차 산업의 배터리 및 전기시스템과 수상레저기구 중 접근이 용이한 수상오토바이를 결합하여 전기 동력 추진식 수상오토바이 개발과 전기 동력 추진식 수상오토바이 실용화를 위한 등록 및 제작을 위해 전기 동력 추진식 수상오토바이의 안전검사 기준(안)과 형식승인 기준(안)을 개발하였다. 전기 동력 추진식 수상 오토바이 인증기준은 기존 내연기관 동력 수상오토바이의 인증기준과 선박 전기 시스템과 관련된 인증기준을 기본으로 구조 및 시스템 설치 안과 전기시스템 안의 두 분류로 구분을 하였고, 최종적으로 안전검사 기준(안)과 형식승인 기준(안)으로 개발하였다. 안전검사 기준(안)의 내용은 총 7개의 범주로 구분되어 수상오토바이의 안전한 운행을 위한 설비의 확인을 목적으로 작성되었고, 형식승인 기준(안)은 총 7개의 범주로 구분되어 수상오토바이의 안전한 제작을 위한 목적으로 작성되었다. 본 연구를 통해 국내 친환경 수상오토바이 제작의 환경 조성과 전기동력 추진 선박의 인증기준에 대한 정책 수립 기초 자료로 활용이 가능하다.

Recently, as demand for Electric Car has been increasing, it has been a main factor that maximizing performance and ensuring the stability of the Electric Car battery to increase the reliability of Electric Car. Above all the study on thermal control in a big influence on the performance and battery life is growing in parallel. This study has compared cooling effect of an Electric Car battery between battery with Heat Sink and without Heat Sink for optimum design of Electric Car battery. Battery is simply modeled into four cells, divided into two cases of battery with Heat Sink that attached on the cell's side and without Heat Sink. And this research was conducted on forced convection. The battery which is designed by this way was numerically analyzed by CFX 14.5. Numerical results, revealed that the battery with Heat Sink was superior in terms of cooling effect. According to the numerical analysis by battery cell's temperature variations, the battery with Heat Sink turned out to be superior in cooling effect to the battery without Heat Sink.

In this study, electric propulsion leisure boat with 9 meters length is designed and the performances are investigated by CFD analysis and model test. Maximum speed of the developed boat is 15knots(7.7 m/s) using 80Kw electric motor. Catamanan type hull form with slender body is adopted considering high Froude number and large deck area. Two kinds of hull forms are designed and the performances are compared in resistance point of view. Wave patterns are observed to make clear the relationship between resistance performance and wave characteristics. The results show that not only wave interaction due to shoulder waves but also stern waves have a strong influence on resistance performance and CFD analysis including free surface can give useful informations at initial ship design stage for high Froude number catamaran boat.

본 연구에서는 최근 분리, 흡착과 같은 물리적인 수처리 공정이 중요해짐에 따라 Track-etched polycarbonate(PC) membrane이 친수성이며 균일한 기공크 기를 가지고 기계적 강도가 우수하다는 점을 이용하여 표면이 하전되어있는 입자를 포함한 콜로이드 용액의 제거능력에 대해 조사형 분리 특성을 파악하였다. 유화중합을 이용하여 각각 양전하, 음전하로 각각 하전된 균일하며 착색된 나노 입자(70 ~200nm)를 제조하고, SEM, DSC, FT-IR 및 제타 전위를 측정하여 라텍스의 특성을 파악하였다. 이후 PC membrane의 표면전하 및 기공크기와 입자의 표면전하 및 입자크기에 따른 수투과도 및 배제율을 조사하였다.

The electric flexible videoscope was developed. The developed components of the videoscope are insertion tube, 360 degrees full articulation tip with joystick control, detachable probe part, camera module equipped with CMOS sensor and adjustable high-intensity white LED light sources. The insertion tube can have strong torsional rigidity from the components of spiral spring and tungsten mesh tube. The handset with joystick control makes it possible to manipulate the videoscope tip articulation in 360 degrees of all directions easily. Over 90 degrees of bending angle measured from the straight camera probe makes it possible to inspect the surface of side wall. The detachable probe model can separate insertion tube with probe. It is useful to select proper length of insertion tube. Several tests were performed to check the development objectives.

The limitations and problems of the rechargeable battery and short mileage per one electric charging have not been overcome at the electric vehicles. To solve these problems, the hybrid vehicle has been developed by securing the performance of automotive with the conventional internal combustion engine and the environmental benefit. Meanwhile, the electric UTV (utility terrain vehicle) which has this environmental benefit has been widely used for factories, parks, leisure and agricultural areas. In this study, the electric UTV was fabricated and attached the auxiliary power drive systems including the photovoltaic power generation system into this electric vehicle in order to make up the hybrid (motor + photovoltaic) vehicle system. As the range of the hybrid UTV would be extended over 20% than that of the existing golf cart per one electric charging through this successful development, the dynamic stiffness was improved through light-weight body design.

The processing properties of spent hen and broiler chicken were investigated before and after treatment to improve texture characteristics. Each treatment consisted steaming (S) with 85℃ for 20 min, Pulsed Electric Field (PEF) with 1.5 KV/cm for 4 sec, and Super Heated Steam (SH) with an oven temp. of 300℃, a steam temp. of 350℃ for 8 min. The yield of spent hen and broiler were 66.85% and 63.80% respectively in the control, but decreased in every treatment was lowest at 61.05% in the PEF treatment (p<0.05). In the color test, L value decreased, but the a and b values increased regardless of the species of spent hen or broiler. In the test of heating loss, the S treatment of spent hen had the highest result of 45.25% but lowest of 30.66% in the SH treatment of the broiler. When it was compared with various treatments, SH after PEF treatment showed the better result in terms of heating loss than the PEF or SH treatment respectively. In the test of texture, the broiler showed the lowest hardness of 5.57 kg in the SH (p<0.05). Otherwise, the spent hen resulted in 14.08 kg of hardness in steaming after PEF, but it improved significantly to 10.73 kg in SH after PEF. In the test of 9 scored sensory evaluation of overall palatability, 7.8 point was the best score with SH treatment in the broiler. The best score in spent hen was 6.3 point which was SH after PEF treatment. With this experiment, SH after PEF was the condition in the treatments to have the better texture of spent hen.

Broccoli, one of Brassica vegetables, has been known to possess various health beneficial activities including anti-inflammation, anti-oxidation and anti-cancer etc. Various metabolites were indicated as active compounds in broccoli. Glucosinolates such as glucoraphanin, glucobrassicin, glucoerucin and isothiocyanates, i.e. sulforaphane, which is produced through the enzymatic action of myrosinase are getting focus as their bioactivities. In this study, we treated broccoli with pulsed electric field (PEF) processing and the metabolite profiles were investigated based on the metabolomics analysis. PEF process was applied to stem and floret of broccolis with three different levels; 500, 1000, 1500 pulses with 2 kV/cm, then metabolites were extracted with 70% methanol. Metabolomic analysis was carried out with mass spectrometry through multivariate statistical analysis based on the OPLS-DA model. Significant changes of metabolite profiles were observed by PEF treatment and specific metabolites were affected as dose dependent manner. Content of major glucosinolates compounds such as glucoerucin, glucoiberin, glucoraphanin, glucobrassicin, 4-hydroxy glucobrassicin, and 4-methoxy glucobrassicin were significantly reduced, while sulforaphane was distinctively increased in PEF treated broccolis. The results implied that myrosinase released from vacuole by PEF processing transformed glucosinolate into isothiocyanate, which would be useful findings for enhancing bioactivity of broccoli by simple PEF treatment.