PURPOSES : This study aims to determine the type (e.g., melting point, freezing point, latent heat fusion) and optimal content of phase change material (PCM) based on the numerical and experimental analyses evaluating the effects of heat transfer in PCM-modified asphalt pavement systems. METHODS : The effect of PCM on the thermophysical properties of PCM-modified asphalt concrete can be taken as an effective volumetric heat capacity. The volumetric fraction of PCM was calculated using an iterative method. The numerical model was established and computed using the MATLAB 2020 software. The optimum PCM design tool was developed to select the type and contents of the PCM. The PCM was chosen based on the following criteria: black-ice-formation delay time, minimize temperature increase, and increase temperature area. To validate the numerical model, asphalt mixtures were modified with varying PCM contents, and the temperature response of the PCMmodified asphalt samples was examined via temperature test. RESULTS : The numerical results showed that incorporating PCM into the asphalt mixture can slow the cooling rate of the pavement system. The predicted results from the optimum PCM design tool were highly consistent with the measured values from the laboratory temperature test. CONCLUSIONS : The temperature of PCM-modified asphalt pavement can be predicted via numerical method. The effect of PCM on the thermophysical properties can be considered as effective volumetric heat capacity; while the volume fraction of PCM can be calculated via an iterative method. The accuracy of the numerical model was confirmed by a high agreement between the measured and predicted values.

Mycelium composites and leathers have versatile material properties based on their composition and manufacturing process. To prepare mycelium mat for the production of mushroom leather, several strains were mutated by gamma rays. Some mutant strains, including Lentinula edodes, Ganoderma lucidium, and Schizophyllum commune showed good hyphae growth rate and density on saw-dust media. Irradiation power (Gy), time, and height from the radiation source to the sample were examined. Based on the preliminary data obtained in this study, comprehensive research should be conducted to explore the optimal strains and culture conditions for mycelium-based leather production.

느타리 ‘흑타리’ 품종의 배양 중 고온스트레스에 의해 발생되는 미발이 현상을 구명하기 위하여 배양온도에 따른 생육차이를 조사하였다. PDA 배지에서‘흑타리’의 적정생육온도는 23~26 ̊C였고, 균사생장속도는 ‘춘추2호’에 비하여 빠른편이었다. 병내 배지온도는 초기에 상승하여 배양 중반에 최고점에 도달한 후 온도가 하강하였다. 배양 온도가 높을수록 배양기간은 짧아졌다. 배양온도 20 ̊C 처리구에서 배양기간은 25일 정도 소요되었으며, 미발이율은 1.8%, 수량은 139.4 g/병을 나타내었다. 배양온도 24 ̊C 처리구에서 배양기간은 20일 정도 소요되었으며, 미발이율은 4.2%, 병당수량은 132.1 g/병을 나타내었다. 배양온도 16 ̊C와 28 ̊C처리구에서는 미발이율이 증가되었고 수량이 감소하였다. 이 결과를 바탕으로 농가에서 배양온도와 미발이율의 관계를 조사하였다. 배양실 온도를 18 ̊C로 설정하고 배지품온을 28 ̊C 미만으로 관리하는 농가는 미발이율이 0.3~0.8%를 나타내었다. 배양실내의 온도가 20 ̊C 이상이며 환기가 잘 이루어지지 않은 농가에서는 미발이율이 3.5% 정도 발생되었다. 배양실 온도가 19 ̊C이며 배지 최고 품온이 31.3 ̊C까지 상승하는 농가는 미발이율이 8.2%로 높게 나타났다. 배양중 병내부 온도가 28 ̊C이상 상승하고 배양실내의 환기가 잘 이루어지지 않을 경우 미발이율이 증가하고 수량이 감소되는 경향을 보였다. 결과적으로, 배양실은 배지품온이 28 ̊C 이상 상승하지 않도록 배양실 내부의 공기를 지속적으로 순환시키고, 배양공간에 맞는 최적의 배양량을 넣어 관리하여야 한다.

Based on corpus linguistics, synchronic and diachronic linguistics, lexicology, pragmatics, sociolinguistics and other theoretical knowledge, this paper makes a dynamic and in-depth study of the “Gou” popular neologisms. Under the guidance of corpus linguistics, this paper makes a statistical analysis of the word family of “Gou”, summarizes the growth of the number of members of the word group, the high frequency use of the word family, the syllable structure of the members of the word family, etc., and shows the changing characteristics of the word group in various aspects. Using the methods of etymology investigation and dynamic tracking, this paper analyzes that the word family of “dog” is a process in which many new words of “xxgou” type are derived from the original use of “single dog”, and gradually expand to 128 members. Under the guidance of lexicology theory, by means of semantic analysis, this paper sums up four referential meanings of "Gou" from the referential meaning of [+ animal] to [+ human], and then, through generalization, it derives four referential meanings of [+ identity], [+ profession / profession / field], [+ state], [+ stress / tension], [+ preference], [+ behavior / thing], [+ aversion], [+ behavior / thing]. Under the guidance of pragmatics theory, this paper explores the word family of “Gou” and summarizes the characteristics of the morpheme “Gou” of the family of words with the characteristics of quasi affixation, trisyllabic structure of words and single part of speech of members of the word group.

본 논문에서는 독일 통일과정에서의 동·서독 주민의 역할을 고찰하였다. 독일정치는 경제적 발전과 사회이익을 위한 동서독 통일, 즉 게젤 샤프트(Gesellschaft)를 추구하였으나, 동서독 주민은 이를 위한 게마인샤프트(Gemeinschaft) 복원을 위해 노력해 왔다. 본고에서는 40여 년간의 분단 이후 독일통일은 외적으로 동독에 대한 서독의 흡수통일 의 형태를 띠고 있으나, 내적으로 동·서독 주민의 게마인샤프트 복원의 과정을 거치고 있음을 강조한다. 본고에서는 분단 시기 동서독 간 이주 및 교류 상황을 고찰하고, 포스트 통일 시기 동독 주민의 정체성 형성을 통한 독일의 게마인샤프트 복원 과정을 분석하였다.

The photovoltaic properties of perovskite solar cells (PSCs) with a carbon electrode fabricated using different annealing processes are investigated. Perovskite formation (50 oC, 60 min) using a hot-plate and an oven is carried out on cells with a glass/fluorine doped TiO2/TiO2/ZrO2/carbon structure, and the photovoltaic properties of the PSCs are analyzed using a solar simulator. The microstructures of the PSCs are characterized using an optical microscope, a field emission scanning electron microscope, and an electron probe micro-analyzer (EPMA). Photovoltaic analysis shows that the energy conversion efficiency of the samples fabricated using the hot-plate and the oven processes are 2.08% and 6.90%, respectively. Based on the microstructure of the samples and the results of the EPMA, perovskite is formed locally on the carbon electrode surface as the γ-butyrolactone (GBL) solvent evaporates and moves to the top of the carbon electrode due to heat from the bottom of the sample during the hot plate process. When the oven process is used, perovskite forms evenly inside the carbon electrode, as the GBL solvent evaporates extremely slowly because heat is supplied from all directions. The importance of the even formation of perovskite inside the carbon electrode is emphasized, and the feasibility of oven annealing is confirmed for PSCs with carbon electrodes.

PURPOSES : A pilot experimental study on the formation of fine particulate matter through photochemical reactions using precursor gas species (volatile organic compounds (VOCs), NH3, SO2, and NOx) was conducted to evaluate the large-scale environment chamber for investigating the pathway of aerosol formation and the subsequent assessment techniques used for reducing fine particulate matter. Two small-scale environment chambers (one experimental group and one control group), each with a width, depth, and height of 3 m, 2 m, and 2.3 m, respectively, were constructed using ethylene tetrafluoroethylene (ETFE) films. METHODS : The initial conditions of the fine particles and precursor gases (NOx and VOCs) for the small-scale environment chamber were set up by injecting diesel vehicle exhaust. NH3 and H2O2 were added to the small-scale environment chamber for the photochemical reaction to form organic and inorganic aerosols. The gas phase of the VOCs and the chemical compositions of aerosols were investigated using a proton transfer reaction time-of-flight mass spectrometer and the aerodyne high-resolution time-of-flight aerosol mass spectrometer at 1 and 10 s time resolutions, respectively. Gas phases of NO and NO2 were measured using Serinus 40 NOx at a 20 s time resolution. RESULTS : The small-scale environment chambers built using ETFE films were proved to supply sufficient natural sunlight for the photochemical reaction in the environment chambers at an average of approximately 89% natural sunlight transmission at 300–1000 nm. When the intermediates of NH3 and H2O2 for the atmospheric chemical reaction were injected for the initial condition of the small-scale environment chamber, nitrate and ammonium in the experimental group increased to 4747% and 1837%, respectively, compared to the initial concentrations (5.4 μg/m3 of nitrate and 5.2 μg/m3 of ammonium), indicating the formation of secondary inorganic aerosols of ammonium nitrate (NH4NO3). This implies that it is necessary to inject intermediates (NH3 and H2O2) for the formation of fine particulate matter when simulating the atmospheric photochemical reaction for assessing the environment chamber. CONCLUSIONS : This study has shown that small-scale environment chambers can simulate the atmospheric photochemical reaction for the reduction of fine particulate matter and the formation of the aerosol pathway. The results of this study can be applied to prevent time and economic losses that may be incurred in a full-scale environment chamber.

최근 가축에서 유래된 메티실린에 내성이 있는 황색포 도상구균과 감수성을 보이는 황색포도상구균(LA-MRSA/LAMSSA) 에 의한 사람의 감염증이 증가하는 추세이다. 이러한 LA-MRSA 및 LA-MSSA균주는 가축을 비롯한 축산업에 종사하는 사람들에게 전파가 이루어질 수 있다. 본 연구에서는 원유, 육우, 축산 종사자에서 분리된 20개의 MRSA 및 MSSA 균주를 이용하여 생물막 형성, 항균 펩타이드에 대한 저항성 및 과산화수소 저항성과 같은 황색포도상구균의 주요 병원성 인자를 평가하였다. 생물막 형성 실험에서는 MRSA와 MSSA간의 차이는 없었으며, 동물 유래 분리주와 사람 유래 분리주들 간의 비교에서도 차이가 없음이 확인 되었다. BMAP-28에 대한 감수성 시험 결과 MRSA-MSSA 또는 동물 분리-사람 분리 간의 차이가 없음을 확인하였다 . 생물막 형성과 BMAP-28 감수성과는 달리, 원유에서 분리된 MRSA 균주들의 H2O2에 대한 내성 증가가 확인 되었다 . 본 연구를 통하여 가축 및 축산업 종사자에서 분리된 LAMRSA와 LA-MSSA 균주의 주요 병원성 인자를 확인하였으며, 숙주 및 환경에서의 생존과 전파 가능성을 이해하는 데 기초 자료로 활용 될 수 있을 것이다.

LA-MC-ICP-MS zircon U-Pb dating was conducted to constrain the timing of fossil formation and the depositional age of the uppermost Jinju Formation located in Natural Monument No. 534 (Tracksite of Pterosaurs, Birds, and Dinosaurs in Hotandong, Jinju), and 87 Cretaceous, 1 Precambrian, and 2 Jurassic zircons were obtained from 90 valid analytical points. Most Cretaceous zircons were found to have a youngest graphical peak age of ca. 106.5 Ma, suggesting the depositional age of the uppermost Jinju Formation. Based on this study and previous works, the average sedimentation rate of the Jinju Formation was calculated to be approximately 0.17-0.31 mm/year in the Milyang Subbasin, and the Cretaceous zircons of the uppermost Jinju Formation seem to have originated mainly from the western or northwestern parts of the Gyeonggi Massif. Unlike the Nakdong and Hasandong formations of the Sindong Group, most zircons analyzed in the uppermost Jinju Formation were Cretaceous. This suggests that volcanic activity occurred in the area closer to the Gyeongsang Basin due to the roll-back of subducting paleo-Pacific Plates during the Jinju period.

모든 종교는 평화를 추구한다. 평화는 삶의 모든 양식과 관련되어 있음에도 불구하고, 평화에 관한 연구는 전공 분과학문의 테두리 안에 서 개별적 관심에 따라 이루어져 왔다. 한반도 평화는 종교연구와 평화연구의 공통된 주제이다. 그러나 종교연구자들은 평화의 사회적 측면을 간과해 온 반면, 평화연구자들은 종교의 심층적 이해를 도외시 해 온 경향이 있다. 이 연구는 인간에 대한 종교연구의 심층적 이해와 사회에 대한 평화연구의 사회과학적 이해를 융합한 ‘종교평화학’을 한반도 평화연구의 새로운 방법론으로 구성하기 위한 기초연구이다. ‘종교평화학’은 종교연구와 평화연구의 개별 분과학문 체계에서 출발하 여, 분과학문의 경계를 넘어서는 융합적 차원에서 수행됨으로서 종교연 구와 평화연구 각각의 한계를 극복하고, 종교와 평화 연구의 상호 발전과 성숙에 기여하는 담론 생산을 목표로 한다.