타지키스탄공화국에는 10군데의 우라늄광산 부지에 55백만톤의 우라늄광산 폐기물이 적치 되어 있는데 부지 면적이 200 핵 타아르에 달한다. 이에 따라 우라늄 폐광과 폐기물의 안전한 관리가 주요 이슈로 부각되고 있다. 부지 복원을 위한 천연방벽 과 인공방벽으로 구성된 다중 복토층은 성능 목표와 부지 조건을 고려하여 설치되어야 한다. 본 논문의 목적은 Degmay 부 지에 장기간 (100년 이상)의 환경보호를 제공할 수 있는 경제적인 다중 복토층 개념을 제시 하는 것이다. HELP 코드를 사용 하여 Degmay 부지의 복토층 설계 개념의 평가를 수행하였다. 그 결과 70 cm의 덮개층, 30 cm의 배수층, 지오멤브레인 라 이너 그리고 60 cm의 토양 방벽층으로 구성된 복토층 개념이 두께를 최소화 할 수 있고 비교된 여러 설계개념 중 가장 경제 적인 설계 안으로 제시되었다.

본 논문에서는 MRV 규제 대응을 위해 선박 운항효율데이터 수집 및 검증 시스템을 구축하고 이를 활용하여 해운선사 업무 지원과 국가 온실가스 인벤토리 산정이 가능한 국제해운 에너지효율 포탈 시스템을 설계하였다. 시스템 요구조건을 도출하기 위하여 EU MRV 법안과 IMO MRV 논의사항, 해운선사의 선박에너지효율과 온실가스규제 대응 및 국제해운 온실가스 통계 현황에 대하여 분석 하고 선박 에너지효율과 온실가스 배출량 데이터 수집을 위하여 선내 장비, 에너지효율 측정 장비, 운항보고서를 활용한 데이터 수집 모듈과 선박에서 수집된 데이터를 육상으로 전송하기 위해 관리가 용이하고 사용량이 최소화된 데이터베이스기반 전송 모듈을 설계하 였다. 수집된 데이터의 표준보고양식 변환, 모니터링, 통계 및 분석, 검증, 보고서 자동생성과 국가 온실가스 인벤토리 지원이 가능한 국제해운 에너지 포탈시스템을 설계하였다.

In this study, Hazen-Williams C value of pipes in wide waterworks system was estimated and statistically analyzed. Hazen-Williams C value of water pipe was predicted after 20 years of service period. From the results, it was found that C value of water pipe for treated water maintained higher value of 110 after 20 years of installation. Furthermore, it was found that velocity coefficients of steel pipe for less than and more than 20 years of installation were 117.7 and 109.3, respectively. C value of ductile iron pipe for less than and more than 20 years of installation were 118.1 and 114.2, respectively. In this study, it was also found that small value of C is used in the design of water pipe system. Therefore, excessively bigger size of pipe can be determined in the design of water pipe system. From the results of present study, optimum value of C can be used to avoid the oversized design of water pipe system.

매년 증가하고 있는 풍해에 대한 대책으로서의 내풍설계는 필수적이다. 사과나무 지주시스템의 내풍설계를 위해서는 우선적으로 사과나무에 작용하는 풍하중을 파악해야 하고, 이를 위해서는 사과나무의 항력계수 산정이 필요하다. 기존 항력계수 산정 방법에서 발생할 수 있는 실험적 오차 등의 문제점을 보완하고자, 하중 측정 장치의 제작을 통한 풍하중 직접 측정 및 이를 통한 항력계수의 역추정 과정을 수행하였다. 풍속이 증가할수록 항력계수는 감소하며 점차 수렴하는 경향을 나타냈으며, 풍속 30m/s 일 때, 전면적 기준 약 0.176, 순면적 기준 약 0.356 의 값을 갖는 것으로 나타났다.

본 연구에서는 안동지역 특용작물 재배농가의 요구를 반영 하여 사용자 편이성이 강화된 정보화의 방안으로 스마트폰을 활용한 정보화시스템 구축을 다음과 같이 검토하였다. 본 연구의 방법은 연구의 대상인 안동지방 특용작물재배농 가에 대한 정보화요구 자료수집과 분석, 실제 사용자인 특용 작물 생산농가의 의견수렴을 거쳐 DB의 구축, 프로그램레이 아웃을 거쳐 농업경영장부와 영농일지가 반영된 일원화시스템 구축을 하였으며, 산출물은 농민들의 시연을 거쳐 보완하였다. 연구의 결과는 다음과 같다. 1. 스마트폰을 기반으로 한 판매관리시스템은 정보화에 익 숙하지 않은 농민들도 쉽게 사용할 수 있어 농가경영개선에 도움을 줄 수 있었다. 2. 스마트폰연계 영농시스템은 컴퓨터와 연동하여 웹기반 영 농일지 및 영농관리에 활용할 수 있었다. 3. 소비자 입장에서는 친환경농산물 생산에 필요한 생산이 력관리를 제공할 수 있었다. 향후 농업인구 감소와 급속한 고령화의 진행은 농업산업의 변화를 요구하고 있으며 본 연구가 스마트시대로의 변화 속에 농촌정보화의 한 축을 담당할 수 있을 것이다.

This paper introduces the Hierarchical Decomposition Mapping Diagram (HDMD) that represents the systematic architecture of axiomatic design. HDMD is composed of the contents of module symbol and the independence/dependence relationship between FRs (Functional Requirements) and DPs (Design Parameters). The examples presented in this paper show the strength of the diagrams in comparison with other studies of systematic architectural representation tools, such as hierarchical diagram, module-junction diagram and system flow diagram.

In this study, to develop high-efficiency environmental improvement system that can be combined with hot and cold potable water supply to poultry air conditioning for the summer increase heat stress relief and winter feed efficiency through optimal design hwihan The aim of this study was to provide basic data. As a cage the size of the system installed is 100m2 test capacity 20RT district heating and cooling of air-to-water heat pump and the control was composed of electric hot water boilers. First of cage sizes for heating load design, materials, heat pump capacity, air capacity, storage tank, drinking water tank capacity, etc. were determined. The capacity of the heat pump was set to 20RT cage captive birds are erected as vertically and horizontally × height × (13 × 21 × 4.5m). Storage tank 3 tons and capacity of 10 tons potable water tank was designed. In the future, the size of the cage, designed according to the best breeding two numbers are needed.

Design in small hydro power systems is the detailed work required a variety of epidemiological considerations. However, turbine designers were often feel the limitations due to repetitive calculations or drawings, rather than focusing on finding the turbine performance and efficiency improvements. Furthermore, miss the point in repeating the procedure design process or cross the interface is not easy to keep track of the changes required parameters should also feel the difficulties in efficient design. Improve this unreasonable points, though he design part is insufficient understanding of the hydro turbine, to automate the design to exclude the repetitive operations is the purpose of this study

The up-to-date small and medium-sized enterprises (SMEs) in Korea have tried to respond flexibly and rapidly to dynamic business environment and to establish efficient production management system based on information technologies. However, most of SMEs have faced with low applicability of the production management system resulting from high costs of introduction and maintenance. In this paper, a production planning and control system, that is S-PMS (production management system for SMEs), is proposed to solve the problem of low applicability and limited human resources. S-PMS enables production managers to efficiently collect and manage master data with the actual target production systems and explores the bottleneck process by means of simulation techniques to improve productivity. Furthermore, it implements rescheduling mechanism in terms of a variety of process routes. In essence, intuitive dispatching rules and integrated data management of S-PMS improve field applicability of production management system. Consequently, S-PMS is expected to be used as an efficient production management system of SMEs in Korea.

Fish exportation using airplanes incurs sizable logistics costs (12,000KRW/kg), according for more than 45% out of the total export cost. Thus, it is unreasonable to quantitatively expand fish exportation by means of air transport. In addition, cases of failing to deliver fish at the right time to the right place occurs frequently due to the limited cargo capacity and insufficient cargo space of airplanes, especially during the peak season. Therefor, a technology that not only minimizes the logistics costs but also transports fish freshly and safely, in the case of long distance exportation to countries such as the United States and Taiwan, should be developed. In this study, a live fish container control system for long distance transportation was designed and implemented. Live flatfish (2,000kg) were selected as the target fish, were transported to the United States to analyze and verify the performance of the a live fish container control system and transportation ability.

This paper is concerned with the optimal design of hyperbaric oxygen therapy system chamber with separated rooms for multi-users using stress analysis. Hyperbaric oxygen therapy is very important medical remedy for increasing the concentration of melted oxygen in human and animal body to recover the impaired cell for the healthy condition. This research proposed the proper procedures to design the physical specifications and investigate the mechanical design safety of hyperbaric oxygen chamber with two separated rooms using computational stress analysis with Solidworks program. The result of this research will be used to make the real size model of practical hyperbaric oxygen therapy system for multi-users with separated chamber.

In this paper we describe differential circuit of charge pump for voltage management systems, their evolution and improvement in design. The systems are powered by solar cells and generate different voltage levels which are suitable for systems on-chip integrated regulator applications. The voltage regulator outputs voltage from low power digital circuit, -2V for memory, and from 2V to 12V for input and output components. The circuits were simulated using LT SPICE software.

Optimal design of the water supply pipe network aims to minimize construction cost while satisfying the required hydraulic constraints such as the minimum and maximum pressures, and velocity. Since considering one single design factor (i.e., cost) is very vulnerable for including future conditions and cannot satisfy operator’s needs, various design factors should be considered. Hence, this study presents three kinds of design factors (i.e., minimizing construction cost, maximizing reliability, and surplus head) to perform multi-objective optimization design. Harmony Search (HS) Algorithm is used as an optimization technique. As well-known benchmark networks, Hanoi network and Gyeonggi-do P city real world network are used to verify the applicability of the proposed model. In addition, the proposed multi-objective model is also applied to a real water distribution networks and the optimization results were statistically analyzed. The results of the optimal design for the benchmark and real networks indicated much better performance compared to those of existing designs and the other approach (i.e., Genetic Algorithm) in terms of cost and reliability, cost, and surplus head. As a result, this study is expected to contribute for the efficient design of water distribution networks.