PURPOSES : The logistic roads for freight transport along to the new port of Busan have been suffered by the rapid weather changes including high temperature and torrential rain. As a result, the roads require annual repair, which have been distressed seriously by the heavy logistic and environmental loads. Therefore, we need to identify the cause of the road pavement distresses and find a proper design method to minimize the pavement distress in order to prohibit the problem aggravated. METHODS : The damaged conditions of the logistic roads were investigated on-site. In addition, applied pavement designs, real traffic volumes, and historical climatic information were intensively collected for this project. With the investigated and collected data Korean pavement design program (KPRP) was implemented to analyzed the causes of the damaged roads and conceive the pavement design draft optimized for the roads. RESULTS : According to the investigation and KPRP analysis, the traffic volume to transport freights impacts significantly the pavement distress, so that a higher PG grade binder type should be used, for which polymer modified asphalt (PMA) binders are recommended. Moreover, its pavement thickness should be increased to secure load bearing capacity, but thickening the pavement has been discouraged due to difficulties induced by the road-sectional change, especially road-height change. CONCLUSIONS : In conclusion, 5cm PMA overlay is suggested for the normal-scale maintenance, and 7cm PMA overlay for large-scale maintenance. Besides these, the application of Polymer-modified Stone Matrix Asphalt (PSMA) using PG76-22 binder would be the best preventive maintenance method, which has been well know as having higher fatigue resistant performance than general PMA. However, if we use PSMA, quality control should be very cautious since PSMA can be very susceptible premature distress if its production and construction are improperly proceeded.

PURPOSES : The purpose of this study is to derive specific road design elements for safe urban underground and to adopt measures for minimizing traffic delays and to maintain efficient operation. METHODS : In this study, a qualitative study was conducted using Focus Group Interview (FGI) method to identify significant connection characteristics and develop connections to urban underground roads. Finally, this study analyzes design elements necessary for traffic safety and efficient traffic operation. In addition, relevant case studies were performed with keywords from the FGI method results. Therefore, major design elements were analyzed for urban underground road connection and connection analysis for traffic simulation-based verification. RESULTS : The main characteristics of the connection between the underground roads of the downtown area were divided into three types: traffic flow characteristics, geometric characteristics, and driver behavioral characteristics. From the review of 16 leading studies (10 domestic papers and 6 international papers) according to the characteristics, the main design factors for “traffic flow characteristics” include the traffic volume, design speed, heavy vehicle ratio, and lane change. The important design elements for “geometric characteristics” include the separation distance, number of lanes, slope, lane and shoulder width and the design factors for “driver behavioral characteristics” showed reaction time, driver vision, and driving speed. CONCLUSIONS : The FGI method identified the main characteristics of connections to the underground roads. In addition, the relevant empirical and theoretical research data were considered in case studies, and the design elements were derived and separated spatially based on the features of each design element, establishing a point-specific design element guideline.

PURPOSES : The purpose of this study is to contribute to the utilization of standards while considering the possible upgrade of a local system as a subject of the application. Therefore, this study aims to explore the possible application of LandInfra for a local road management (maintenance) system in the context of enabling the basis of 3D geospatial road information management in Korea. METHODS : Based on a review of related literature and international standards, an analysis of the current system is performed. After reviewing the LandInfra standard, an examination of corresponding classes between each data model (HMS and LandInfra) is performed for the mapping process. After the mapping process, a data model of the LandInfra-based HMS pavement data model is proposed. RESULTS : To apply the LandInfa to the HMS pavement part, an examination of each data model is performed. After this procedure, a LandInfra-based HMS pavement database schema is proposed in the context of enabling 3D geospatial road information management and maintenance, particularly for pavement management information. CONCLUSIONS : This paper presents how the LandInfra international open geospatial standard can be applied to the local road management system (HMS pavement part). As a result of this study, the LandInfra standard could be applied to the HMS; however, an encoding of the standard is required for conformance. Thus, further studies would be the encoding of the proposed data model for conformance with InfaGML encoding standards. In addition, a system prototype may be needed for complete application.

최근, L형 도로측구 상 열화, 균열로 인한 유지보수 작업이 빈번해지고 있다. 본 논문에서는 쐐기 앵커를 이용한 L형 도로측구의 최적 설계에 대해 제시하고자 하였다. 해석 결과, 두 개의 쐐기앵커를 350mm로 관입시킨 경우에서 구조적 안정성을 충분히 확보하는 것을 확인하였다. 또한 3%의 개질유황 콘크리트 배합이 압축강도, 동결융해 등의 내구성 기준을 만족하였다. 반복하중에 대한 수치해석과 현장 평가가 수행 중에 있으며, 추후 해당 시스템의 적용성을 평가하기 위한 추적 조사가 이루어져야 할 것이다.